Encapsulation of Trichoderma harzianum Preserves Enzymatic Activity and Enhances the Potential for Biological Control

Trichoderma harzianum is a biological control agent used against phytopathogens and biostimulation in agriculture. However, its efficacy can be affected by biotic and abiotic factors, and microencapsulation has been used to maximize the efficacy. The objective was to develop polymeric microparticles to encapsulate T. harzianum, to perform physicochemical characterization to evaluate its stability, to evaluate effects on the soil microbiota, antifungal activity in vitro and enzymatic activity. Size distribution of wet and dry microparticles was 2000 and 800 μm, respectively. Scanning electron microscopy showed spherical morphology and encapsulation of T. harzianum. Photostability assays showed that encapsulation protected the fungus against ultraviolet radiation. The evaluation of the microbiota showed that the proportion of denitrifying bacteria increased when compared to the control. The T. harzianum encapsulation showed an improvement in the chitinolytic and cellulosic activity. In vitro tests showed that encapsulated fungus were able to provide a greater control of S. sclerotiorum.


INTRODUCTION
For many years, the control of pests and diseases in agriculture has been achieved using synthetic chemicals. However, this has also led to a number of problems for human health, environmental contamination, biodiversity decrease, and pathogen resistance (Zhu et al., 2018). It is therefore desirable to use other safer means of controlling pests and diseases that do not cause adverse effects on human health and the environment. One of such means is through biological control of pests and diseases. The use of biological control agents offers a more sustainable approach that can also address a number of problems associated with the use of agrochemicals in the field (Pazini and Galli, 2011;Li et al., 2012).
Trichoderma harzianum is a strong candidate among the various biological control agents. This saprophytic fungus is found worldwide, mainly in the soil (Schuster and Schmoll, 2010).
Several species of Trichoderma, especially T. harzianum, are used in agriculture for their ability to produce large amounts of enzymes and secondary metabolites for the control of phytopathogens (Błaszczyk et al., 2014). The mechanism of action of Trichoderma involves mycoparasitism, the production of antimicrobial compounds (Howell, 2003), certain enzymes (Elad, 2000), antibiosis, competition and induction of resistance in host plants (Howell, 2003;Keswani et al., 2014). The hydrolytic enzyme complex that the fungi of the genus Trichoderma produce are composed of chitinases, β-glucanases, cellulases, and proteases. These enzymes are capable of decomposing the cell wall of phytopathogens, thus allowing hyphae penetration, colonization and onset of myoparasitism (Hermosa et al., 2012;Carvalho et al., 2015). Among these enzymes, chitinases are the most effective for the biological control of various plant pests and diseases (Ihrmark et al., 2010).
However, commercial formulations based on Trichoderma contain live spores and therefore require storing under refrigeration or at temperatures below 28 • C, while field applications must be performed under conditions of high relative humidity. Furthermore, ultraviolet (UV) light is harmful to the fungus (Paula et al., 2011;Vemmer and Patel, 2013). Therefore, it is necessary to develop methodologies that can increase bioavailability of this biological control organism in the field. One possible way is to use microencapsulation techniques (Lewis and Papavizas, 1985;Knudsen, 1990;Fraceto et al., 2018). Formulations composed of polymeric microparticles have attracted considerable research interest due to desirable characteristics such as biocompatibility and biodegradability (Poletto et al., 2008b,a;Huang et al., 2009). One of the most advantageous techniques for the production of microparticles is ionic gelation, since it is easy to perform and avoids the use of organic solvents (Rodrigues et al., 2012). Microencapsulation provides a protective barrier around the biological control organism, so that detrimental external factors such as pH, humidity, and ultraviolet radiation do not impair its action (Paulo and Santos, 2017;Locatelli et al., 2018).
Our search of literature has found studies on microencapsulation of T. harzianum in polymeric microparticles. In addition, many of these studies have also reported characterization of the microparticles and viability of the fungus after encapsulation ( Table 1).
Most of the studies presented in Table 1 have reported methods of preparation and characterization of the microparticles containing T. harzianum, and the conidia shelf life but have not investigated biological activity or enzymatic activity of the encapsulated fungi. In the present study, we have described the method of preparation of T. harzianum containing microparticles and their characterization by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). Also, fungal viability assays were performed through study of the shelf life and the effect of UV light. In addition, we have been investigated the effects of the microparticles on soil microbiota as well as enzymatic activity and in vitro inhibition of Sclerotinia sclerotiorum. These aspects provide new information on the efficacy of microencapsulated T. harzianum as a biological control agent against agricultural pests.

Preparation of Calcium Alginate Microparticles
The microparticles were prepared using the ionic gelation method, which involved dropping a suspension of sodium alginate (ALG -Sigma-Aldrich) containing the organism into a solution of calcium chloride (CaCl 2 -Synth) (dos Santos et al., 2015). A 2% ALG solution was prepared, followed by addition of the fungus powder (2%, w:v -Ecotrich-Ballagro) and agitated for 1 h to obtain a homogeneous mixture. The alginate solution containing fungus (1:1 v:v) was then dropped into a 0.1 mol L −1 solution of CaCl 2 while agitating on a magnetic stirrer. The microparticles formed were stored at 4 • C in a sterile glass vessel. The mean initial quantity of spores in the microparticles containing the encapsulated fungus was estimated at 1 × 10 10 spores mL −1 . An aliquot of the particles was also dried in an oven at 27 • C to 5% moisture level to compare with wet microparticles.

Size Distribution
The size distributions of the wet and dry calcium alginate microparticles were determined using ImageJ software. Around 500 microparticles were deposited on a surface and analysis was made of individual particles. The size distribution of the dry microparticles was determined after drying in an oven at 27 • C for 24 h, with the counting performed in the same manner as for the wet microparticles.

Scanning Electron Microscopy
The external and internal morphology of the microparticles was examined by SEM. The samples were dried in an oven at 27 • C for 24 h prior to depositing on supports and spray-coating with colloidal gold. The internal surfaces of the microparticles were analyzed after cutting the microparticles using a scalpel. The images were acquired using a JEOL Model JSM-6010LA electron microscope, operated at 3 kV, at the Materials Characterization Multiuser Laboratory of UNESP -Sorocaba.

Differential Scanning Calorimetry
Differential scanning calorimetry was used to investigate components of the microparticles, the T. harzianum fungus, and the microparticles with or without the encapsulated fungus. The microparticles with or without the encapsulated fungus were dried in an oven, at 27 • C for 24 h. The DSC procedure was performed by placing the dry microparticles in aluminum containers and heating from 10 to 400 • C, under a 50 mL min −1 flow of nitrogen.
Agilent FTIR spectrophotometer was used in the range from 4000 to 400 cm −1 , with 32 scans per sample and resolution of 8 cm −1 .

Effect of the Microparticles on Soil Microbiota
The soil used in this analysis (vegetable soil, purchased from agricultural stores is composed by aluminum: 0.832 mg/cm 2 , calcium: 1.675 mg/cm 2 , chlorine: 0.174 mg/cm 2 , iron: 5.654 mg/cm 2 , potassium: 0.454 mg/cm 2 , magnesium:0.252 mg/cm 2 , phosphorus: 0.004 mg/cm 2 , silicon: 15.007 mg/cm 2 , sulfur: 0.049 mg/cm 2 , titanium: 0.755 mg/cm 2 , chromium: 0.004 mg/cm 2 , manganese: 0.029 mg/cm 2 , zinc: 0.007 mg/cm 2 , strontium: 0.008 mg/cm 2 , yttrium: 0.002 mg/cm 2 , zirconium: 0.087 mg/cm 2 , arsenic: 0.000 mg/cm 2 , and bromine: 0.000 mg/cm 2 ) was left at ambient temperature in the dark for 3 days and was then homogenized by passing through a sieve (mesh 18). A 10 g portion of the soil was added to a 50 mL tube (area of 7 cm 2 ), which was placed in a microcosm. In order to ensure soil conditions similar to those found in the field, ammonium sulfate (Synth) was added at 100 mg N kg −1 . Deionized water was then added until the soil reached 60% humidity and the tubes were left in the dark at 20 • C (Hjelmsø et al., 2014). Subsequently, the soils were exposed to concentrations equivalent to 250 and 2500 g ha −1 of sodium alginate, T. harzianum, the fungus encapsulated in dry or wet calcium alginate microparticles, dry and wet calcium alginate microparticles, and the negative control (water). After 30 days of exposure, DNA was extracted from the microbiota using the Power Soil R DNA Isolation Kit (MoBio Laboratories, Inc.). The extracted genetic material was quantified by fluorescence (Qubit 3.0 fluorometer), using the Qubit R dsDNA BR Assay Kit (Invitrogen). After quantification, the extractions were diluted to a final total DNA concentration of 1000 ng mL −1 .
The specific primers used for the molecular evaluation of the soil microbiota were the bacterial 16S rRNA, nifH, narG, nirk, nirS, norB, and nosZ genes responsible for the production of enzymes linked to the nitrogen cycle (Jung et al., 2012).
For the qPCR reactions, the mixtures were prepared in a final volume of 25 µL containing 12.5 µL of Planium R SYBR R Green qPCR SuperMix-UDG with ROX (Invitrogen), 1 µL of each primer (sense and anti-sense), 100 ng of DNA template, and ultrapure water.
The conditions used for the amplification were as described by Jung et al. (2011), with initial denaturation at 95 • C for 3 min, followed by 40 cycles of 95 • C for 45 s, 60 • C for 45 s, and 72 • C for 45 s. The fluorescence was measured at the end of each incubation at 60 • C. The analysis employed a calibration curve constructed using serial dilutions of the DNA (1:1, 1:10, 1:100, and 1:1000, v:v). The slope of the curve was used to determine the mean efficiency of the amplifications.
The results for the relative quantification of the samples were provided by the equipment, based on calculation of 2 − Ct , where Ct is the difference between Ct for the sample gene and Ct for the control gene (Eq. 1), enabling comparison between the control and the material tested. (1)

Quantification of Spores
The quantification of spores was performed by two methods: CFU g −1 (colony-forming units per gram of sample) and using a Neubauer chamber. The wet and dry microparticles were evaluated at the start and during storage for up to 120 days at different temperatures (5 and 30 • C). For counting the colonies in both microparticles (dried and wet), it was necessary to dilute the microparticles so that the spores could be counted. The dilution was done in 2% sodium citrate (Synth) solution for 20 min, under magnetic stirring (dos Santos et al., 2015). For CFU g −1 analysis, the microparticles were serially diluted in saline solution [0.85% w/v NaCl (Synth)] containing Tween 80 (0.1%). Aliquots of 0.5 mL were plated onto potato dextrose agar (PDA -Sigma-Aldrich) containing Triton X-100 (0.25 g L −1 -LGC Biotechnology). The plates were incubated at 28 ± 2 • C for 18 h, followed by counting the colonies. The total spores were counted in a Neubauer chamber and the resulting concentrations were expressed as the number of total spores per mL. An aliquot (10 µL) of the diluted microparticles was placed in the Neubauer chamber, with counting of 5 quadrants of each field (fields 1 and 2). The number of spores per mL was calculated for each field and the values were averaged using Eq. 2.

Evaluation of Microparticle Photostability
The fungus T. harzianum (at a concentration of 1:1 v:v) and five wet and dry calcium alginate microparticles containing T. harzianum were exposed to ultraviolet light (UVA 400-315 nm/UVB 315-280 nm) for 24 h, at ambient temperature and at a distance of 20 cm, in a darkroom. Samples were removed at different times (0, 5, 30, 60, 120, 240, and 1440 min) and plated onto PDA (K25-610102, KASVI), prepared according to the manufacturer's instructions.

Release Kinetics
The spore release profile was determined using density measurements of the samples at different growth stages, starting after hydration of the microparticles (Batista et al., 2017). The microparticles were placed in PDA culture medium, where they were kept until full development of the fungus. Images were acquired at different times (0, 1, 2, 4, 8, 12, 24, and 48 h), using a photodocumentation system, and were analyzed using ImageJ software. The release was determined using Eq. 3 (Batista et al., 2017).
where Area(t) is the fungus growth area at a specific time, t microparticle hydration is the time required for the hydration process to be complete, and t → ∞ is the total area of the Petri dish. The microparticles were exposed to UV radiation (UVA 400-315 nm/UVB 315-280 nm) at room temperature and at a distance of 20 cm. The assay was performed in triplicate.

Chitinase Activity
The chitinase activity of the fungus T. harzianum encapsulated or not in the wet and dry calcium alginate microparticles was measured by detecting positive chitinase in agar (Agrawal and Kotasthane, 2012). The culture medium for the detection of chitinase contained (per liter): 0.3 g of magnesium sulfate heptahydrate (Synth), 3 g of ammonium sulfate (Synth), 2 g of monobasic potassium phosphate (Synth), 1 g of citric acid monohydrate (Dinâmica), 15 g of agar (Kasvi), 200 µL of tween 80 (Sigma-Aldrich), 4.5 g of colloidal chitin (Sigma-Aldrich) and 0.15 g of bromocresol purple (Synth). Subsequently, the pH of the solution was adjusted to 4.7 and autoclaved at 121 • C for 15 min.
The culture medium was placed in Petri dishes until solidified, then wet and dry microparticles containing the encapsulated T. harzianum and T. harzianum were placed on the culture medium and incubated for 3 and 5 days at 25 ± 2 • C. After this period, chitinase activity was observed by changing the color of the culture medium.

Cellulase Activity
The cellulase activity of the fungus T. harzianum and of the wet and dry microparticles containing T. harzianum was determined through qualitative quantification (Pansa, 2017). For this, the fungus encapsulated or not plated in culture medium selective for cellulase, using the CMC medium (0.5 g sodium nitrate (Synth), 1 g dibasic potassium phosphate (Synth), 0.5 g magnesium heptahydrate (Synth), 0.01 g iron sulfate heptahydrate (Synth), 1 g yeast extract (Kasvi), 10 g carboxymethylcellulose (Sigma-Aldrich), 15 g agar (Kasvi), 1 g H 2 O) and supplemented with 1 mL Triton X-100. Subsequently, the plates were incubated for 5 days at 30 • C and a solution of red congo (0.1% v/v -Synth) added to the petri dish. After 15 min, the plates were washed with 1M NaCl solution, and cellulose degradation was observed visually as a halo.

Biological Activity (In vitro Antagonism)
The biological activity of the calcium alginate microparticles containing T. harzianum was evaluated against the phytopathogen S. sclerotiorum (white mold) using an in vitro test. The wet or dry microparticles containing T. harzianum (10 8 conidia mL −1 ) were placed on one side (right) of a Petri dish containing PDA medium, while the pathogen was placed on the opposite side (left). The plates were incubated at room temperature and the growth of the organisms was observed. The assays were performed in triplicate.
The inhibition was evaluated using a classification scale from 1 to 5 (Bell et al., 1982): class 1 = T. harzianum fully combated the pathogen and covered the entire surface of the medium; class 2 = T. harzianum occupied at least two-thirds of the surface of the medium; class 3 = T. harzianum and the pathogen each colonized half of the medium (or more than one-third, but less than twothirds); class 4 = the pathogen colonized at least two-thirds of the surface of the medium and appeared to resist invasion by T. harzianum; class 5 = the pathogen completely overcame the T. harzianum and occupied the entire surface of the medium. T. harzianum was considered a pathogen antagonist when the mean score was ≤2, but not so antagonistic when the mean score was ≥ 3 (Bell et al., 1982). FIGURE 1 | Size distributions of wet and dry calcium alginate microparticles synthesized by ionic gelation, with or without T. harzianum and scanning electron micrographs of the dry calcium alginate microparticles, with and without encapsulated T. harzianum. (A) Wet calcium alginate microparticles; (B) wet calcium alginate/fungus microparticles (1:1 w:w); (C) dry calcium alginate microparticles; (D) dry calcium alginate/fungus microparticles (1:1 w:w). The size distribution was determined using ImageJ software. The wet and dry microparticles presented mean sizes of 2000 and 800 µm, respectively. (E) Calcium alginate microparticles; (F) calcium alginate:fungus microparticles (1:1 w:w). The interiors of the microparticles with and without the fungus showed differences, due to the presence of the fungus (spores) in the second image. The images were acquired at magnifications of 95× (insert) and 250×.
The efficiency index for the action of T. harzianum against S. sclerotiorum was calculated using Eq. 4.
where A S is the growth area of S. sclerotiorum and A T is the growth area of T. harzianum.

Characterization of the Microparticles
The results of physicochemical characterization of the calcium alginate microparticles prepared with or without the fungus are shown in Figure 1. The calcium alginate microparticles had a spherical shape and a slightly transparent white color, while the microparticles containing the encapsulated T. harzianum were also spherical, and had a greenish color. Size distribution measurements were made of the wet and dry calcium alginate microparticles prepared with or without the encapsulation of T. harzianum. The size distributions of the wet microparticles are shown in Figures 1A,B. The wet calcium alginate microparticles presented a size distribution from 1500 to 2700 µm, and a similar size distribution was obtained when the microparticles were prepared with the encapsulated fungus (fungus:polymer ratio of 1:1 w:w).
The size distributions of the microparticles after the drying process are shown in Figures 1C,D. The dried calcium alginate microparticles presented a size distribution from 600 to 1300 µm, while the dried microparticles containing the encapsulated T. harzianum showed a size distribution from 400 to 1200 µm.

Scanning Electron Microscopy
Scanning electron microscopy was used to characterize the morphology of the microparticles. The micrographs (Figures 1E,F) showed that the particles produced under all the synthesis conditions were spherical, even after the dehydration process. In the absence of the encapsulated fungus, the calcium alginate microparticles presented an average diameter of 905 µm, while in the presence of T. harzianum, encapsulated at a ratio of 1:1 (w:w), the average diameter was 812 µm. The surfaces of the microparticles presented cavities that could have been formed during the sample drying process and the preparation for microscopy analysis.

Differential Scanning Calorimetry
Thermograms of the microparticles with or without the encapsulated fungus, the different components, and T. harzianum are shown in Supplementary Figure S1, where the heat flux (W/g) is plotted as a function of temperature ( • C).
The sodium alginate thermogram presented an endothermic peak at 122 • C and an exothermic peak at 240 • C (Supplementary Figure S1 -Alginate). The calcium chloride thermogram presented two endothermic peaks, the first at 180 • C, and the second at 220 • C (Supplementary Figure S1 -Calcium chloride). The thermogram of T. harzianum (Supplementary Figure S1 -T. harzianum) showed an endothermic peak at 120 • C and an exothermic peak at 310 • C.

Infrared Spectroscopy
The infrared spectra of the microparticles (with or without the encapsulated fungus), the individual components, and T. harzianum are shown in Supplementary Figure S2. The alginate spectrum (Supplementary Figure S2 -Alginate) showed a band at 3300 cm −1 , due to OH bonds, while bands at around 1593 and 1408 cm −1 could be attributed to COO − bonds. The infrared spectrum of T. harzianum (Supplementary Figure S2 -T. harzianum) showed two peaks, at 3687 and 3619 cm −1 .
The spectrum of the calcium alginate microparticles (Supplementary Figure S2 -Microparticles) showed an increased size of the band corresponding to OH bonds, due to the presence of water in the microparticles (5% moisture content). One of the bands corresponding to COO − bonds was shifted to a wavelength greater than 1420 cm −1 . Shift of the COO − band confirmed the crosslinking of Ca 2+ with the COO − group of sodium alginate. When the fungus was encapsulated (Supplementary Figure S2 -Microparticles with T. harzianum), the presence of a single peak and a shift to 3681 cm −1 were indicative of interaction of the fungus with the microparticles. The spectrum for the physical mixture of sodium alginate and calcium chloride (Supplementary Figure S2 -Alginate and Calcium chloride) showed bands at 3384 and 1623 cm −1 , which were characteristic of each substance. The physical mixture of sodium alginate, calcium chloride, and the fungus (Supplementary Figure S2 -Alginate, Calcium chloride and T. harzianum) showed the presence of bands corresponding to alginate (at 3300, 1593, 1408, and 1019 cm −1 ), calcium chloride and the fungus (at 3687 and 3619 cm −1 ).

Effect of the Microparticles on Soil Microbiota
The quantification of genes associated with the nitrogen cycle was used to elucidate possible effects caused by T. harzianum and to determine whether the encapsulation of this fungus could also lead to alteration of the original microbiota of the soil.
The results of the molecular evaluation of the soil microbiota using real-time PCR are shown in Figure 2.
In terms of the proportions of genes linked to the nitrogen cycle (Figure 2), a decrease of nitrogen-fixing bacteria were observed for the treatments, compared to the negative control. At the same time, the proportions of denitrification bacteria increased for all the treatments, compared to the negative control. However, comparison of the results for the encapsulated and unencapsulated fungus revealed no change in the proportions of the genes involved in the nitrogen cycle. Figure 3 shows the results of spore quantification for the wet and dry calcium alginate microparticles containing T. harzianum, following storage at different temperatures (5 and 30 • C), using the CFU g −1 and Neubauer chamber counting methods.

Quantification of Spores
The microparticles containing the encapsulated T. harzianum fungus showed viability of 10 8 and 10 7 CFU mL −1 for wet and dry microparticles, respectively. When CFU g −1 was used ( Figure 3A), wet microparticles stored at 5 • C did not show significant variation in spore viability at 15, 30, 45, 60 and 90 days. However, after 120 days of storage, a significant variation of the spores (10 6 CFU mL −1 ) was observed. Compared to this, when the wet microparticles were stored at 30 • C, there was a significant variation in the number of spores after 30 days (10 7 CFU mL −1 ). The dried microparticles stored at 5 • C also showed significant variation in spore viability after 60 days of storage (10 6 CFU mL −1 ). When the dried microparticles were stored at 30 • C, they showed a decrease in the spore numbers after 15 days. After 90 days, the spores were no more viable.
In order to evaluate the spore viability by another methodology, we used the Neubauer chamber ( Figure 3B). Initially the microparticles containing the encapsulated fungus T. harzianum presented viability of 10 6 CFU mL −1 for wet and dry microparticles. The results obtained by counting in a Neubauer chamber showed that the wet and dry microparticles stored at 5 and 30 • C maintained spore viability after 120 days FIGURE 3 | Quantification of the spores of T. harzianum encapsulated in the wet (WMP) and dry (DMP) calcium alginate microparticles, during storage for 90 days at 5 and 30 • C, using the CFU g −1 and Neubauer chamber techniques. (A) Log10 spore quantification using the CFU g −1 method applied to the wet and dry microparticles; (B) Log10 quantification of spores (conidia/mL) using the Neubauer chamber method applied to the wet and dry microparticles. The encapsulated fungus presented higher spore viability during the period evaluated. *No conidia growth at this time. a refers to the significant difference in the quantification of spores on the evaluated days when compared to day 0. of storage (10 6 CFU mL −1 ). The encapsulated spores presented better viability in the wet microparticles at both stored temperatures. The dry microparticles presented better viability of the stored spores at 5 • C.

Evaluation of Photostability
The results (Figure 4) showed that growth of the free fungus was negatively affected after 3 days of exposure, compared to growth of the organism encapsulated in the wet or dry microparticles.
After encapsulation, the fungus T. harzianum also showed a better resistance to ultraviolet radiation when compared to nonencapsulated fungus.

Release Kinetics
It was also important to evaluate the releases kinetics of the microcapsule contents. For this, a template was used as described by Batista et al. (2017). The results of the growth kinetics assays for the fungus encapsulated in the wet and dry calcium alginate microparticles, as well as the unencapsulated fungus, are shown in Figure 5. In the case of the dry microparticles, the measurements were only considered after the swelling process was complete. A larger growth area was observed for the unencapsulated T. harzianum, compared to the fungus encapsulated in the microparticles (wet or dry), demonstrating the sustained release of the fungus contained in the calcium alginate microparticles. After exposure of the microparticles and the fungus to ultraviolet radiation, a smaller area of growth was shown by the unencapsulated fungus, compared to the fungus encapsulated in dry microparticles ( Figure 5B). This confirmed the protection provided to the fungus by the microparticles, with the growth of the organism not being affected by the ultraviolet radiation treatment.

Chitinase Activity
The colloidal chitin culture medium containing bromocresol purple, when inoculated with T. harzianum, results in the FIGURE 4 | Photostability assays after 7 days exposure to ultraviolet radiation, for the free fungus and the wet (WMP) and dry (DMP) microparticles containing encapsulated T. harzianum. The results showed that encapsulation of the fungus provided protection against ultraviolet radiation. breakdown of chitin into N-acetyl glucosamine. This break causes a color change in the culture medium based on the pH change, going from yellow to purple in the presence of chitinolytic activity (Agrawal and Kotasthane, 2012).
The chitinase activity was evaluated by the purple color diameter after 3 and 5 days of incubation in the fungus T. harzianum encapsulated or not in wet and dry calcium alginate microparticles ( Figure 6A). T. harzianum showed an increase in chitinase activity after microencapsulation and this can be observed after 3 and 5 days of incubation, evidencing a higher activity after 5 days.
After 3 days of incubation, the wet and dry microparticles containing the fungus T. harzianum showed a higher chitinolytic activity than the non-encapsulated fungus, noting that the dry microparticles also showed higher activity in this period. However, after 5 days of incubation, we noticed that there was a total color change in the culture medium where the wet and dry microparticles containing the encapsulated fungus were present with no difference between them.

Cellulase Activity
After incubation of the plates in CMC medium, the plates were stained with red congo and thus the degradation halo was revealed. The degradation halo was formed by the absence of dye binding with β-1,4-glycidyl bonds (Florencio, 2011), indicating the areas of hydrolysis. This method is used as a simple tool for the identification of microorganisms producing cellulase enzymes (Ten et al., 2004).
The results of the evaluation of cellulase activity by qualitative quantification can be seen in Figure 6B.
It can be seen that there was formation of the halo hydrolysis in the plates containing T. harzianum encapsulated or not in wet and dry microparticles. When the fungus was microencapsulated, there was an increase in the colony and, consequently, in the halo of degradation when compared to the non-encapsulated fungus.

Biological Activity (In vitro Antagonism)
The in vitro assays were performed using unencapsulated T. harzianum and with the fungus encapsulated in the calcium alginate microparticles. The results are illustrated in Figure 7.
The unencapsulated T. harzianum showed class ≥3 on the antagonism classification scale, indicating that the fungus was moderately antagonistic in this assay, to the classification of Bell et al. (1982). Although the unencapsulated fungus was antagonistic to the phytopathogen, there was sclerotia formation by S. sclerotiorum in this sample ( Figure 7A).
The fungus encapsulated in the wet and dry calcium alginate microparticles was able to control the growth FIGURE 5 | The release kinetics assays using the wet and dry microparticles with encapsulated T. harzianum, as well as the unencapsulated fungus, without (A) or with (B) exposure to ultraviolet radiation. The encapsulated fungus presented slower release.
of S. sclerotiorum in the in vitro trials. The classification was ≤ 2 and there was no formation of sclerotia (Figures 7B,C).
The results showed that there was a difference in the classification scale of the encapsulated and unencapsulated T. harzianum fungus. This difference is possibly due to the fact that microencapsulation provides protection of biotic and abiotic factors, as well as increased efficacy as a biological control agent.
The efficiency index (Supplementary Table S2) showed that the fungus encapsulated in the wet microparticles had 20-fold higher efficiency in the control of S. sclerotiorum, compared to the unencapsulated fungus, with no sclerotia formation. These results indicate that the encapsulated fungus is more promising for the control of S. sclerotiorum, compared to the unencapsulated fungus.

DISCUSSION
In this study, the synthesis and characterization of calcium alginate microparticles through the ionic gelation method containing spores of the fungus T. harzianum was performed. The calcium alginate microparticles synthesized by the ionic gelation method obtained an average size of 900 µm, spherical morphology and were able to encapsulate the T. harzianum fungus. Microparticles composed of sodium alginate, sodium polyphosphate and glycerol, in different proportions were used to encapsulated containing T. harzianum. They were encapsulated by ionic gelation methodology as the same used in this study (dos Santos et al., 2015). The FTIR characterization showed a peak at around 1019 cm −1 is characteristic of C-O-C bonds. Locatelli et al. (2018) also found these characteristic bands of sodium alginate.   (Bell et al., 1982), but that there was the formation of white mold sclerotia (indicated by the arrows). (B) Results using the fungus encapsulated in wet microparticles. (C) Results using the fungus encapsulated in dried microparticles, indicating that the encapsulated fungus was a satisfactory antagonist. Figure S2 -Calcium chloride) appeared at 3428 and 1617 cm −1 , which relate to the vibration of OH functional group (Jurić et al., 2019).

Bands associated with the presence of calcium chloride (Supplementary
Subsequently, the molecular analysis of the soil microbiota was carried out with bacterial genes involved in the stages of the nitrogen cycle. Thus, each part of the nitrogen cycle has a group of responsible bacteria. These bacteria are of great importance in agriculture, since they are responsible in transforming the nitrogen in forming bioavailable, thus making the soil fertile (Hirsch and Mauchline, 2015). However, little is know about the effects of T. harzianum encapsulated in nitrogen cycle microorganisms as well as the effects of microparticles.
In this study, the soil microbiota had an increase in denitrifying bacteria from the nitrogen cycle in the presence of the microparticles containing the encapsulated T. harzianum fungus when we compared with the negative control. As example, Masrahi et al. (2014) evaluated the influence of silver nanoparticles on the kinetics of nitrification in the soil, using the soil-mud nitrification method in combination with sorption and dissolution isotherms. It was found that Ag + and silver nanoparticles (AgNPs) acted to suppress the nitrification process, with the degree of suppression increasing as the nanoparticle concentration increased. However, the mechanism by which the AgNPs exerted toxicity toward the nitrifying bacteria remained unclear. In other work, Maurer-Jones et al. (2013) evaluated the toxicity of quantum dots toward the expression of bacterial genes involved in the nitrogen cycle. The presence of the quantum dots altered the expression of these genes, and also modified the processes of nitrification/denitrification. Priester et al. (2012) investigated the susceptibility of soybean to cerium oxide nanoparticles (nano-CeO 2 ). At high concentrations, the nano-CeO 2 decreased N 2 fixation by 80%, compared to the negative control, while at low nano-CeO 2 concentrations, the N 2 fixation potential appeared to increase.
In another study, Guilger et al. (2017) evaluated the effect on the soil microbiota of biogenic silver nanoparticles produced using T. harzianum. The authors reported that the amount of bacteria increased over time in all soil samples tested, as compared to the negative control. After 30 days of exposure, the soil shown largest difference of the number of bacteria. However, after 90 days, there was a decreasing number of fixing and denitrifying bacteria.
These studies have shown that the presence of microparticles in the soil increases the amount of denitrifying bacteria in the soil. This means that the amount of nitrogen returned to the atmosphere is higher and thus, it becomes available for nitrogen fixation. In addition, the genus Trichoderma is able to reduce the amounts of nitrogen fertilizers in agriculture and helps in the growth of plants (Harman, 2011). This stage of toxicity assessment is extremely important for the development of new products that will one day be available in the market. Therefore, the use of the microparticles containing the encapsulated fungus in agriculture turns out to be promising.
Another important aspect is the viability of the T. harzianum spores in the microparticles. Here was evaluated in this work, where it had a viability of 120 days in two different storage temperatures (5 and 30 • C). The encapsulated spores presented better viability in the wet microparticles at both stored temperatures. The dry microparticles presented better viability of the stored spores at 5 • C. As described by Locatelli et al. (2018) and dos Santos et al. (2015), our viability results are in line, since it was possible to maintain the viability of encapsulated T. harzianum spores.
Another important point that interferes with the effect of the T. harzianum biocontrol agent is UV radiation. For this, a photostability test was carried out and the microparticles were able to evaluate the fungus protection. T. harzianum is a wellrecognized biological control agent, but there are limitations associated with its use that can prejudice its effectiveness, such as sensitivity to UV light and unsuitable humidity and/or temperature. These factors can lead to low persistence of the organism in the environment (Vemmer and Patel, 2013). Microencapsulation provides the biological control agent with protection against biotic and abiotic factors, including UV light, temperature, and humidity. In addition, the slow and controlled release results in increased persistence of the agent in the environment (Paulo and Santos, 2017).
After encapsulation, the fungus T. harzianum showed a better response to ultraviolet radiation when compared to nonencapsulated fungus through exposure, where it is sensitive. In the present case, it could be seen that the amount of fungal growth on the plate was lower for the unencapsulated organism, compared to the growth of the encapsulated fungus, especially after 5 days of exposure to UV radiation. UV radiation is one of the main environmental factors causing direct or indirect damage to the fungi, reducing their effectiveness and inhibiting both germination of conidia and the early stages of germ tube development (Braga et al., 2002;Hughes et al., 2003;Ozeçelik, 2007). Considering the growth of the fungus exposed to UV radiation for the period employed here (7 days), it is evident that encapsulation of T. harzianum in calcium alginate microparticles provides protection against UV radiation. Elçin (1995) encapsulated Bacillus sphaericus 2362 in calcium alginate microcapsules, in order to evaluate their photoprotective effect. The microcapsules containing the encapsulated bacteria, as well as a suspension of these microcapsules, were exposed for 48 h to UV radiation from a 12 W lamp, at ambient temperature. It was found that the viability of the unencapsulated spores decreased from 1 × 10 8 to 1 × 10 3 CFU mL −1 after 12 h of exposure. For times over 24 h, the encapsulated spores presented greater viability, compared to the free spores. At 1% (m:v) in the alginate microcapsules, the number of viable spores was 10 times greater, compared to the free spores. The results demonstrated that encapsulation increased the viability of the spores and made them less sensitive to ultraviolet radiation, confirming the photoprotective effectiveness of the system. Hughes et al. (2003) investigated the effect of solar radiation (UV-B, UV-A -315 to 400 nm and photosynthetically radiation -400 to 700 nm) on five different fungi and oomycetes (Geomyces pannorum, Phoma herbarum, Pythium sp., Verticillium sp., and Mortierella parvispora). It was found that after 3 h of exposure to solar radiation (> 287 nm), hyphal extension rates decreased by 100% (M. parvispora), 63% (Verticillium sp.), 48% (G. pannorum), 41% (Pythium sp.), and 15% (P. herbarum), compared to controls that did not receive radiation. Therefore, the exposure to all types of UV radiation was detrimental to fungal growth. Ozeçelik (2007) evaluated the effect of UV radiation (254 and 354 nm) on the growth of different fungi and bacteria on various types of surfaces. The organisms became inactive after 45 min of exposure at 254 nm, while exposure at 354 nm did not affect the growth of the fungi and bacteria.
Comparison of the results obtained for the wet and dry microparticles containing the encapsulated T. harzianum showed that there were no differences between them, with both types of microparticle providing protection against UV radiation. And from the commercial perspective, the dried microparticles containing the encapsulated fungus would be more practical, due to their greater ease of storage and application.
These results were able to show us that the system of this work is quite effective, because it presents a good stability and viability of the spores even in the presence of UV radiation.
After encapsulation, it is important to evaluate the release kinetics of the compound and for this a template was used as described by Batista et al. (2017). The release kinetics assay showed us how the fungus release from the calcium alginate microparticles in the presence or absence of ultraviolet light. The fungus in absence of UV presented a larger release area than the encapsulated fungus, this shows the controlled release of the microparticles. The fungus had a larger release area when encapsulated and exposed to UV, this happened due to the fact that the microparticle system used in this work is effective in protection, especially in dry microparicles. Batista et al. (2017) evaluated the growth areas of the Beauveria bassiana fungus encapsulated in alginate-bentonite microparticles dried using different air flow and lyophilization processes. The results showed that the light emission was directly related to the development of the organism and that the growth area was larger when the microparticles were dried by the air flow method. Elsewhere, He et al. (2015) encapsulated the bacteria Raoultella panticola Rs-2 in alginate-bentonite microparticles and found that the organism presented behavior that was dependent on the concentrations of alginate and bentonite.
As a consequence, we can show that the fungus encapsulated in microparticles presents a great potential for protection against UV radiation and this is a very important factor for the use of these microparticles under field conditions. Once this was understood, a biological activity assay was performed to evaluate whether the fungus, even after microencapsulation, remained a good biological control agent. Trichoderma harzianum is one of the most widely used biological control agents in agriculture as it has potential against a wide range of fungal pathogens. In this study, we investigated the antagonistic activity of T. harzianum and microparticles containing T. harzianum encapsulated against S. sclerotiorum. The in vitro antagonism assay showed an improvement in the efficacy of action against the phytopathogen S. sclerotiorum when encapsulated, where there was inhibition of phytopathogen growth and absence of sclerotia. Thus, we can observe that T. harzianum encapsulated presented a significant improvement in the biocontrol potential. Based on this comments, the results showed us that the encapsulated fungus had a greater antagonistic activity against wild mold than the unencapsulated one. Therefore, this does not mean that T. harzianum showed no activity on the pathogen, but that encapsulation provided an improvement in its action. Zhang et al. (2016) evaluated the biocontrol potential of the T. harzianum isolate T-aloe against the phytopathogen S. sclerotiorum. The results showed that the T. harzianum inhibited the growth of S. sclerotiorum with na efficiency of 56.3% in dual culture tests. In plate tests, there was na inhibition of 51.2% and there was production of sclerotia.
The enzymatic activity is a key point in the mechanism of action of T. harzianum (Druzhinina et al., 2011), and our results have shown that the encapsulation promotes an increase in the chitinase and cellulase activities of the encapsulated T. harzianum. This could be due the fact that the fungi are protected in the microparticles which makes then less exposed to external factors (UV, temperature, pH, etc.). Agrawal and Kotasthane (2012) evaluated the chitinolytic activity of different isolates of Trichoderma from different geographical locations in Central India. Their results showed that 61 isolates showed chitinolytic activity and were classified into 4 different groups (no chitinase activity, low chitinase activity, medium chitinase activity and high chitinase activity). Of the 61 isolates, 17 presented high chitinase activity and 8 presented medium chitinase activity. Ting and Chai (2015) evaluated the expression of chitinase and β-1,3-glucanase activity of T. harzianum in the presence of pathogenic isolates (Fusarium oxysporum, Ganoderma boninense) and non-patogenics (T. viridescens, Serratia marcescens, and Streptomyces griseus). The results showed that T. harzianum presented chitinase activity, independent of the presence of pathogen isolates, as it produces these enzymes naturally.
In vitro assays are essential for the evaluation of results, as they are reliable results and minimize possible impacts that in vivo tests may cause. Thus, the literature has shown that there are no differences when comparing the results for in vivo and in vitro assays. Moya et al. (2020) evaluated native species of Trichoderma spp. as biological control agents for Pyrenophora teres through in vitro and in vivo assays, where in vitro assays were done through antagonism and in vivo assays were done in greenhouses. Results from in vitro assays showed that all Trichoderma isolates were able to inhibit mycelial pathogen growth by up to 54% when compared to the control. Meanwhile, in vivo results also showed that all Trichoderma isolates were able to significantly decrease the pathogen incidence in trough seedlings by up to 55%. Thus, this study shows us that there is no difference in results between in vitro and in vivo assays. In addition, the results showed that the same isolates that showed better antagonism in the in vitro assay were also the best in vivo. Therefore, in vitro assays are needed to evaluate the biological mechanisms involved in antagonism and to confirm this mechanism in in vivo assays.
The tests were performed with two types of microparticles containing the encapsulated fungus (wet and dry). We can highlight that there is a difference in the results between them. Comparisons of the main results can be seen in Table 2.
Overall, there are no differences between wet and dry microparticles when comparing the results of biological activity, photostability, among others. However, when we evaluate shelf life results we see that wet microparticles have a better shelf life when compared to dry microparticles. Thus, from the point of view of stability it would be better to use wet microparticles.

CONCLUSION
In summary, the results of this study have shown that calcium alginate microparticles are effective in protecting T. harzianum against ultraviolet radiation and potentially other abiotic factors in the environment. The results of DSC and FTIR analyses revealed that the fungus interacted with the calcium alginate microparticles. Molecular evaluation of the soil microbiota showed that the microparticles increased the number of denitrifying bacteria and T. harzianum with the potential to decrease the use of nitrogen fertilizers. In release experiments, the encapsulated fungus presented sustained release. When exposed to ultraviolet radiation, the unencapsulated fungus showed a smaller area of growth compared to the fungus encapsulated in dry microparticles. This further confirmed the protection provided to the fungus by the microparticles, against ultraviolet radiation. The in vitro antagonism assays showed that the wet microparticles containing the encapsulated fungus provided greater control of the white mold phytopathogen, compared to the unencapsulated fungus, with no formation of sclerotia.
The encapsulation of the fungus T. harzianum also showed an improvement in the chitinolytic and cellulosic activity, and therefore a potential for use in agriculture. Overall, the results point out to the possibility for the use of formulations comprising encapsulated fungus for use in agricultural applications.

DATA AVAILABILITY STATEMENT
The datasets generated for this study are available on request to the corresponding author.

AUTHOR CONTRIBUTIONS
CM contributed to the design of the experiments, trial implementation, data collection, data processing, and manuscript writing. NB-J contributed to the performance of the experiments and data collection. RL and LF supervised and guided all the steps for the development of the manuscript, contributed to the design of the experiments, treatment and interpretation of data, and manuscript writing.