Applications of Synthetic Biotechnology on Carbon Neutrality Research: A Review on Electrically Driven Microbial and Enzyme Engineering

With the advancement of science, technology, and productivity, the rapid development of industrial production, transportation, and the exploitation of fossil fuels has gradually led to the accumulation of greenhouse gases and deterioration of global warming. Carbon neutrality is a balance between absorption and emissions achieved by minimizing carbon dioxide (CO2) emissions from human social productive activity through a series of initiatives, including energy substitution and energy efficiency improvement. Then CO2 was offset through forest carbon sequestration and captured at last. Therefore, efficiently reducing CO2 emissions and enhancing CO2 capture are a matter of great urgency. Because many species have the natural CO2 capture properties, more and more scientists focus their attention on developing the biological carbon sequestration technique and further combine with synthetic biotechnology and electricity. In this article, the advances of the synthetic biotechnology method for the most promising organisms were reviewed, such as cyanobacteria, Escherichia coli, and yeast, in which the metabolic pathways were reconstructed to enhance the efficiency of CO2 capture and product synthesis. Furthermore, the electrically driven microbial and enzyme engineering processes are also summarized, in which the critical role and principle of electricity in the process of CO2 capture are canvassed. This review provides detailed summary and analysis of CO2 capture through synthetic biotechnology, which also pave the way for implementing electrically driven combined strategies.


INTRODUCTION
With the advancement of science, technology, and productivity, the rapid development of industrial production, transportation, and the exploitation of fossil fuels has gradually led to the accumulation of greenhouse gases and deterioration of global warming . Global CO 2 emissions have increased by 30.7% after humankind entered the 21st century. Supported by investigation report, if the carbon is still growing at such a high rate, the global concentration of CO 2 will reach up to 5*10^− 4 μl/L by 2050, leading to the extinction of 24% of animals and plants on the Earth (Pacala and Socolow, 2018;Johnson et al., 2021). It also has attracted the attention of countries worldwide that put goals of energy conservation, emission reduction, and carbon neutrality on the agenda (Zou et al., 2021). Carbon neutrality is a balance between absorptions and emissions achieved by minimizing CO 2 emissions from human social productive activity through a series of initiatives, including energy substitution and energy efficiency improvement. Then CO 2 was offset through forest carbon sequestration and captured at last (He et al., 2021). At present, the routes of chemistry (Kourosh et al., 2020), electrochemistry (Li FH et al., 2020), photoelectric catalysis (Wang and Song, 2020), enzyme (Yang et al., 2020), and microbial carbon fixation (Hu et al., 2019) are widely studied. Compared with the chemical route, the biological route, which does not require high temperature and pressure, is a more environmentally friendly process.
CO 2 has played a vital role in the origin of life , in which many species could fix as a carbon resource and flow into the metabolic pathways (Cheah et al., 2016). The central CO 2 -involved pathways are the Calvin cycle, reducing citric acid cycle, Wood-Ljungdahl pathway, 3-hydroxypropionic acid cycle, 3-hydroxypropionic acid/4-hydroxybutyric acid cycle, and the dicarboxylic acid/4-hydroxybutyric acid cycle (Aresta et al., 2016). These cycles have maintained the global carbon balance between absorptions and emissions in the past billions of years. However, with the economic development and environmental changes, the CO 2 emission rate has far outstripped the traditional carbon fixation, and the balance was broken, which also declares the urgency to explore effective means to reduce CO 2 . Enzymes play an essential role in the microbial carbon fixation process, which also exert considerable influence on the CO 2 fixation pathways; for example, the irreplaceable role of ribulose-1,5bisphosphate carboxylase/oxygenase (RuBisCO) (Bhat et al., 2017) and formate dehydrogenase (Kumar et al., 2017) in the Calvin cycle ( Figure 1) and the Wood-Ljungdahl pathway, respectively. Thus, the key enzymes and metabolic pathways involved in the existing CO 2 metabolic pathways provide essential references for developing and enhancing enzymatic conversion and microbial fixation of CO 2 (Jiang et al., 2021;Nisar et al., 2021;Tan and Ng, 2021).
In recent years, initial success has been achieved in the key enzymes' structural design and modification, cofactor engineering, and metabolic engineering to improve efficiency (Chida et al., 2007;Fast and Papoutsakis, 2018). Moreover, advances and innovations of synthetic biotechnology and electrically driven microbial processes have given a new impetus for carbon neutrality.
In this study, we have introduced the natural and artificially modified microbial CO 2 fixation progresses through synthetic biotechnology, in which CO 2 was used as the carbon source for growth and product synthesis. And then, we also discussed the electrically driven enzymatic and non-autotrophic microbial CO 2 fixation process, including mechanism, method, and important progress. Finally, based on full insights into the advantages and disadvantages of synthetic biotechnology and electrochemistry, we prospected the tendency development in the scope of the combination of synthetic biotechnology and electrochemistry, which is expected to provide a new solution for the efficient utilization of CO 2 to generate high value-added chemicals. a system to convert the CO 2 to glucose, produce O 2 from H 2 O, and create a favorable atmospheric environment for the formation of the wide range of living organisms. Cyanobacteria can synthesize various kinds of natural compounds from CO 2 and energy absorbed from sunlight, for example, amino acids, pigment, and fatty acids (Lau et al., 2015). Compared with plants, the fast-growing and efficient CO 2 conversion bacteria, cyanobacteria, have taken the duty of CO 2 capture on its shoulder since ancient times. They also hold promise of being a gifted chassis for a cell factory of chemicals modified through synthetic biotechnology toolboxes. However, compared with model organisms of E. coli and yeast, the limitation of genetic manipulation of cyanobacteria cannot be ignored. Various significant efforts have developed an utterly robust set of synthetic biotechnology toolboxes and modularly recombined parts. These tools include available promoters (Behle et al., 2020;Sengupta et al., 2020), ribosome-binding sites, vector systems, and the CRISPR-Cas system, which are also reviewed comprehensively by Sun et al. (2018); Santos-Merino et al. (2019); Pattharaprachayakul et al. (2020);Santos-Merino et al. (2021). Beyond that, recombinant protein stability was also another crucial factor that decided the outcome of the heterologous expression. The recombinant proteins derived from eukaryotic plants and animals are unstable when freely expressed in the cyanobacterial cytosol but stable when fused with a highly expressed cyanobacterial native or heterologous protein, which was demonstrated by expressing the recombinant proteins of the plant origin isoprenoid biosynthetic pathway, human interferon protein, and tetanus toxin fragment C . These fundamental research studies pave the way to construct a robust engineered cyanobacterial cell factory for the large-scale commercial production from CO 2 .
Based on these pioneering works, many researchers focus on shaping a versatile producer from cyanobacteria. Compared to various heterotrophic model organisms, the relatively lower growth and metabolic rate were the barriers that hindered the development of cyanobacteria from the source, which derived from a lower CO 2 fixation rate. However, compared to many other autotrophic organisms, cyanobacteria have a highly efficient CO 2 enrichment system, which enables them to survive the water environment with low concentrations of CO 2 . In this system, the NDH-1/NDH-1MSs complex converts the CO 2 diffused freely into a cell to HCO 3 -, which is further converted to CO 2 by carbonic anhydrase in carboxysome and provided to RuBisCO as substrate (Angermayr et al., 2015, Figure 1). This unique mechanism guaranteed the CO 2 concentration gradient between the intracellular and extracellular environments. Thus, recent efforts have focused on expanding the wavelength range of the absorbable solar spectrum and increasing electron transport chain activity to increase photosynthetic efficiency. Researchers introduced the chlorophyll f (Chlf)-encoding genes into Synechococcus sp. PCC 7002 absorbs far-red light of wavelengths over 700 nm (Ho et al., 2016). After integrating Chlf into PSI complexes, the active radiation for the new PSI complex was expanded up to 750 nm, which extended the wavelength ranges and provided light compensation under nonsaturating light conditions (Tros et al., 2020).
Meanwhile, overexpression enzymes related to the Calvin cycle can improve photosynthesis and product formation, which have been shown in several research reports (De Porcellinis et al., 2018;Liang et al., 2018). It was also demonstrated in Synechocystis PCC 6803, where extra bicarbonate transporter expression led to a 2-fold enhancement of the growth rate and a higher amount of biomass accumulation (Kamennaya et al., 2015). Likewise, the overexpression of the carbon transporters BicA and SbtA involved in central carbon metabolism enhances biomass production by 50-100% (Gupta et al., 2020). Beyond that, Włodarczyk and his colleague (Włodarczyk et al., 2020) have discovered and characterized a new cyanobacterial strain, Synechococcus sp. PCC 11901, which possesses a shorter doubling time (2 h) and higher biomass production. By engineering this strain, they demonstrated that this promising cyanobacterium was easy to modify and produced free fatty acids with a concentration over 6 mM (1.5 g/L). Ungerer et al. (Ungerer et al., 2018) further identified three specific genes, atpA, ppnK, and rpaA, with SNPs from the fastest growing cyanobacterium, in which atpA and ppnK express an ATP synthase and NAD + kinase with higher performance, resulting in the decrease in the doubling time from 6.8 to 2.3 h. After point mutation in the α subunit of F o F 1 ATP synthase (AtpA), they enhanced the environmental stress tolerance of Synechococcus elongatus PCC 7942, leading to an increase in AtpA protein levels, intracellular ATP synthase activity, and ATP concentrations (Lou et al., 2018).
Many scholars devote themselves to exploring cyanobacteria as a multifunctional platform for a biotechnological process by far. By the introduction of the exogenous glycerol biosynthetic pathway, researchers build a bridge from the CO 2 fixation to glycerol production, which serves as the substrate for the C3 platform chemicals (Wang et al., 2015). Using it as a base, scientists synthesized a variety of chemicals from CO 2 , including 3-hydroxypropionic acid (Wang et al., 2016), isobutanol (Miao et al., 2017), limonene (Lin et al., 2017), and 2,3-butanediol (Nozzi et al., 2017). Beyond that, by introducing a more complicated pathway, costly compounds of polysaccharide terpene (Bhunia et al., 2018) and fatty acid ethyl esters were also produced from these engineered cell factories. By expressing the genes coding for sucrose-phosphate synthase, sucrose-phosphate phosphatase, and sucrose-degrading invertase, sucrose was synthesized and accumulated successfully (Kirsch et al., 2018;Vayenos et al., 2020.). By overexpressing ribDGEABHT (riboflavin-encoding genes) and introducing an internal promoter to the upstream of the heterologous ribAB gene, the production of riboflavin increased by 211-fold (73.9 ± 7.2 μM) compared to the wild-type strain (Kachel and Mack, 2020).
However, the growth and production processes based on photoautotrophic are limited to the time of sunlight available because growth and synthesis were slowed down and ceased in an unlighted environment. In addition, economic feasibility in the application of cyanobacterium as a versatile producer also relies partially on their photosynthetic capacity and solar energy conversion efficiency. The imbalances between absorbed light energy (source) and the metabolic capacity (sink) can potentially increase the carbon flux output from the Calvin cycle, which may be beneficial for increasing the photosynthesis efficiency (Santos-Merino et al., 2021). Many genetic manipulation tools and strategies (Sun et al., 2018) have been developed to translate to significant gains for cyanobacteria as a cell factory to synthesize commercial products from CO 2 . At the same time, it is still a heavy responsibility and a long way from the goal for carbon neutrality with higher efficiency.

Carbon Dioxide Fixation Through Escherichia coli
Unlike cyanobacteria, Escherichia coli is a normal chassis cell for most scientists who possess complete and efficient genetic manipulation tools. Thus, many scientists have devoted themselves to introducing the CO 2 -fixed pathway into E. coli, including the Calvin-Benson-Bassham cycle and the reductive tricarboxylic acid cycle. Milo's group reported significant work that E. coli synthesized sugar from CO 2 by introducing the nonnative Calvin-Benson-Bassham cycle pathway (Figure 2), rewiring the metabolic pathway and directed laboratory evolution, while oxidization of pyruvate provided the reducing power and energy (Antonovsky et al., 2016). Moreover, they also constructed another engineered E. coli that use CO 2 as their sole carbon source through metabolic rewiring and directed evolution, in which formate is oxidized to provide reducing power and energy (Gleizer et al., 2019). Lee and his colleague also heterogeneously expressed the whole gene clusters (cbbI and cbbII operons) belonging to the Calvin-Benson-Bassham (CBB) pathway in E. coli, which was combined with the yeast fermentation process to mitigate exogenous CO 2 . These milestone works provide feasible solutions in changing model heterotrophic organisms to autotrophy one and offer potential possibilities for resource sustainability.
Except for the CBB pathway, the scientist also reconstructed another C1 assimilation pathway to convert the nutritional types of E. coli for integrated utilization of CO 2 and C1 chemical compounds. By employing the technique of rational design, metabolic pathway reconstruction, and metabolic flux rebalance, scientists achieve success in converting the E. coli to an engineered methylotrophic bacterium, which utilize methanol as a sole carbon source for growth with a doubling time of 8 h (Chen CH et al., 2020). By reconstructing the tetrahydrofolate cycle and the reverse glycine cleavage pathway and introducing formate dehydrogenase, the formate and CO 2 could serve as carbon sources for engineered E. coli-sustaining growth (Bang and Lee, 2018). The combined reconstructed reductive glycine pathway and short-term evolution, Kim and his colleague also constructed an engineered E. coli by taking formate and CO 2 as carbon sources, whose doubling time was less than 8 h. By introducing methanol dehydrogenase to the evolved strain, they also converted the engineered E. coli to a methylotrophic bacterium that could grow on methanol and CO 2 (Kim et al., 2020).
Until now, it is hard to achieve the purpose of efficiency CO 2 fixation from the liquid culture medium environment to produce chemical with high productivity, so reutilized CO 2 from the endogenic pathway was particularly significant to reduce carbon emission in large-scale industrial production. By introducing the gene of kor (express α-ketoglutarate: ferredoxin oxidoreductase), acl (express ATP-dependent citrate lyase), frd (express fumarate reductase), and energy pump, the engineered E. coli successfully recycled CO 2 , in which the C-2/C-1 ratio increased to 1.79 ± 0.02 (Chen FYH et al., 2020). Beyond that, the scientists also introduced 20 genes related to the CO 2concentrating mechanism into E. coli to enhance the capture rate of CO 2 , which achieved success in fixing CO 2 from ambient air into biomass (Flamholz et al., 2020). This work would let us not only understand the CO 2 -concentrating mechanism but also lay the groundwork for CO 2 fixation in diverse organisms. The research on E. coli that uses CO 2 to produce high value-added products has achieved preliminary success. However, in contrast to cyanobacteria, E. coli is still growing slowly in autotrophic culture conditions. Therefore, to realize industrial-scale production, a large amount of work was still required to enhance CO 2 fixation and utilization efficiency of engineered E. coli, which could also pave the way for the high value-added product.

Carbon Dioxide Fixation Through Yeast
Saccharomyces cerevisiae is a versatile chassis cell which is widely used as a cell factory of natural compounds, especially for the industrial production of bioethanol. However, the anaerobic fermentation process constrains ethanol concentration and trigger the accumulation of by-product (glycerol), which is caused by the redox-cofactor unbalancing, Guadalupe-Medina select CO 2 as an electron acceptor, which not only balances excess reduced cofactor (NADH) but also captures the CO 2 and reduces greenhouse gas emissions (Guadalupe-Medina et al., 2013). They reconstruct a new pathway to introduce phosphoribulokinase (PRK) and form-II ribulose-1,5-bisphosphate carboxylase (Rubisco), leading to a result with lower (90% reduction) byproduct and higher (10% increase) ethanol production. On this basis, Xia et al. studied the heterologous expression of the xylose reductase (XR)/xylitol dehydrogenase (XDH) and xylose isomerase, which converts xylose to xylulose (Xia et al., 2016). By introducing PRK and Rubisco and upregulating the native pentose phosphate pathway (PPP), they successfully achieved bioethanol production from cellulosic hydrolysates with CO 2 recycling. Joeline Xiberras et al. introduce the "SA module" (malate dehydrogenase, fumarase, and fumarase) to S. cerevisiae for succinic acid production from glycerol and CO 2 (Xiberras et al., 2020). These studies provide a feasible idea to fix CO 2 and form other chemical compounds.
Unlike capturing CO 2 to form chemical compounds through the reconstructed intracellular pathway, a biologically catalyzed CO 2 mineralization process was another simple approach. Roberto Barbero et al. displayed bovine carbonic anhydrase II on the yeast's surface, which has higher thermal stability and mineralized CO 2 with coal fly ash to form CaCO 3 . Coupled with model prediction, they demonstrated that this biological mineralization process is~10% more cost-effective when captured per ton of CO 2 ( Barbero et al., 2013). Shen et al. treated the discarded yeast with potassium hydroxide and form microporous carbon materials with a Brunauer-Emmett-Teller surface area of 1,348 m 2 g −1 and a pore volume of 0.67 cm 3 g -1 , which resulted in a superior performance for CO 2 capture (Shen et al., 2012).
As eukaryotic chassis cells, yeast is more complicated and suitable for natural product synthesis than E. coli. Abundant genetic manipulation makes it more feasible to utilize CO 2 to the product of high value-added long-chain compounds (Figure 3). However, as same as E. coli, a large amount of work was still required to enhance the CO 2 fixation and utilization efficiency before being applied for large-scale industrial manufacture.

ELECTRICALLY DRIVEN CARBON NEUTRALITY Electron Transfer Mechanisms
Enzyme catalytic CO 2 fixation involves a redox reaction, in which electron transfers were performed by the cofactor of NAD(P)/ NAD(P)H. However, the electrical process could realize the regeneration of electron acceptors and donors (cofactor) happened in electrodes to maintain the continuity of the Frontiers in Bioengineering and Biotechnology | www.frontiersin.org January 2022 | Volume 10 | Article 826008 reaction . The electron across enzyme (e.g., cytochrome c and ferredoxin) can transfer directly from the electrode to the substrate when the enzyme's active site is well exposed (Silveira and Almedia, 2013). Although many successes have been achieved in adsorption enzymes on the surface of the electrode, this process was unstable and not feasible in most situations that limit the movement process of the enzyme. However, the electron transfers mediately utilizing carriers (e.g., viologens, quinones, and dyes) shuttle out from the active site to the electrode surface, in which the active site resides deep inside the enzyme (Yuan et al., 2019). That seems more reasonable and practical in non-contact communications FIGURE 4 | Schematic representation of the CO 2 fixation process by electrically driven enzyme.
FIGURE 5 | Schematic representation of the CO 2 fixation process by electrically driven microorganism.
Frontiers in Bioengineering and Biotechnology | www.frontiersin.org January 2022 | Volume 10 | Article 826008 6 between enzymes and electrons, and the drawback is the toxicity from redox mediators (Figure 4).
Some microbial cells can also replace enzymes to realize electron transfer with the electrode, such as Shewanella oneidensis and Geobacter sulfurreducens. There have been three significant mechanisms for electron transfer between the electrode and microbial cells ( Figure 5). First, perform electron transfer by contacting the electrode immediately through c-type cytochromes located in the cell's outer membrane; second, perform electron transfer through redox mediators to communicate with the electrode; and third, perform longrange electron transfer through pili (Pankratova et al., 2019). Compared with enzymes, the microbial cells possess the characteristics of high stability and self-duplicating and do not require purification belonging to the enzyme preparation process. Meanwhile, the weakness of lack of specificity and the slower electron transfer rate must not be neglected.

CO 2 Fixation by Electrically Driven Enzyme
CO 2 Reduction to C1-C2 Chemical CO 2 fixation through enzymes was also lucubrated, which was generally performed through hydrogenation reduction and required an expensive cofactor of NADH/NADPH. Formate dehydrogenase (FDH) has been widely used in coenzyme regeneration, which catalyzes nearly irreversible formate oxidation to CO 2 and provides NADH for the other coupling reaction. Metal-dependent FDH mainly catalyzed CO 2 fixation to produce formate, using NAD + as a cofactor. However, Jayathilake et al. developed a novel approach for CO 2 reduction catalyzed by metal-independent FDH with methyl viologen radical cation (MV•+) as the cofactor, which efficiently regenerated at a carbon electrode through electrochemical reduction without any additional reducing agent (Figure 4). Formate yields as high as 97 ± 1% at 20 mV negative to the reversible electrode potential, much lower than that of metal catalysts (−800 mV to −1,000 mV) (Jayathilake et al., 2019). By embedding the enzymes into the metal-organic framework ZIF-8, Rh complex-grafted electrode was used to regenerate NADH and significantly enhanced the catalytic enzyme rate by 12-fold from CO 2 to methanol compared to the free enzyme statue . The enzyme catalytic CO 2 fixation combined with electrochemical regeneration of natural/artificial cofactor provides a new idea for efficient CO 2 fixation to smallmolecule compounds.

CO 2 Reduction to Higher Value-Added Products
Beyond that, the electrically driven enzyme also catalyzed CO 2 to produce higher value-added products. Two cooperating enzymes in nanopores performed carboxylation by introducing CO 2 to pyruvate (C3) and producing malate (C4), in which indispensable NADH was regenerated and driven by electricity (Morello et al., 2019). A bio-electrocatalytic system was also developed to drive carboxylation by incorporating CO 2 into crotonyl-CoA, ferredoxin NADP + reductase (FNR), and NADPH-dependent crotonyl-CoA carboxylase/reductase were co-immobilized in a viologen-based redox hydrogel. The faradaic efficiency was 92 ± 6% at a rate of 1.6 ± 0.4 μmol cm −2 h −1 (Castañeda-Losada et al., 2021). Thus, combined with the electrical method, the enzyme could be used for higher value-added products synthesis with high efficiency.

CO 2 Fixation by the Electrically Driven Microorganism
On the one hand, enzyme catalytic CO 2 fixation result in high activity and selectivity, and on the other hand, the expensive protein purified process was also non-negligible. So, some scientists have devoted themselves to developing an electrically driven whole-cell catalytic process. Methylobacterium extorquens AM1 perform CO 2 fixation to synthesize formate driven by the electrical method with product concentrations up to 60 mM. Compared to the electrically driven enzyme catalytic process, the whole-cell electro-biocatalytic process is undismayed by being exposed to oxygen gas without providing extra cofactors (Hwang et al., 2015). Employing neutral red as a redox mediator coated outside the carbon felt (CF) electrode, Seelajaroen et al. performed a long-term (17 weeks) electrical reduction of CO 2 to formate based on M. extorquens (Seelajaroen et al., 2019). Beyond that, the bioelectrochemical system also harvests success in producing acetate, methane, butyrate, and polyhydroxybutyrate (PHB). Thus, CO 2 fixation by electrically driven microorganisms is a process that converts renewable electrical energy to chemicals, which is a novel and attractive strategy for energy transformation and storage.

CO 2 Fixation Efficiency Between Electrically Driven CO 2 Fixation and Bio-Carbon Fixation
It is hard to compare the CO 2 fixation efficiency and rate between electrochemistry and bio-carbon fixation processes at "fair" levels because electric energy is converted from solar, wind, and chemical energy. However, we could also get some information and answers from interesting data. After the pioneer's work, the heterotrophic microorganism (E. coli) was engineered to grow on methanol/formic acid and CO 2 , and the doubling time was decreased from~70 to~8 h. By contrast, the doubling time of Synechococcus sp. PCC 11901 (photosynthetic autotrophs), E. coli (chemoheterotrophy), and Vibrio natriegens (chemoheterotrophy) is 6-2 h (Włodarczyk et al., 2020), 27.23 min (Weinstock et al., 2016), and 15.61 min (Weinstock et al., 2016). Thus, there is a significant untapped opportunity for engineered microorganisms to synthesize products from CO 2 with acceptable efficiency. In chemical synthesis, the electro-biocatalytic process produces 60 mM formate from CO 2 in 60 h (1 mM/h) (Hwang et al., 2015) and 14.8 mM malate from pyruvate and CO 2 in 24 h (0.62 mM/h) (Morello et al., 2019). Furthermore, CO 2 was converted to starch at last with a rate~8.5-fold higher than starch synthesis in maize, in which electrically driven CO 2 fixation was combined with the cell-free enzymatic catalytic process. Although electrically driven techniques have gained a temporary lead in efficiency, obstacles from large-scale industrialized production still stared them in the face.
Electrically Driven Carbon Neutrality

COMBINED SYNTHETIC BIOTECHNOLOGY WITH ELECTROCHEMISTRY FOR CARBON NEUTRALITY
By rewiring the metabolic pathway and introducing an exogenous gene module, the electroactive microbial cells can expand their product scope and electro-biocatalysis efficiency. However, there are a finite number of electroactivity microorganisms, and their gene modification platform was limited compared with the model organism. Moreover, the application of these electro-biocatalysts still faces much obstacles, for example, 1) the effect of the electrical environment on the formation of biofilms, 2) limited toolbox for genetic manipulation, and 3) low extracellular electron transfer rate. So, we take S. oneidensis as a representative, which has been studied maturely and in-depth relatively.

Facilitate Biofilm Formation
Electroactive microbial form biofilm on the electrode surface was the foundation in bioelectrochemical systems' normal running process. In the pioneer's work, many genes were identified, which are crucial for the biofilm formation, such as dgcS, cheY3, exeM, and bolA gene. DgcS, a major diguanylate cyclase (DGC), catalyzed GTP to form cyclic diguanosine monophosphate (c-di-GMP), which acts as a second messenger to regulate biofilm formation (Matsumoto et al., 2021). At the same time, phosphorylated CheY3 was also observed to interact with DGCs and co-regulate the biofilm formation (Boyeldieu et al., 2020). ExeM, an extracellular nuclease, was also identified as a crucial enzyme for the normal biofilm formation, activated by the metal cofactors (Ca 2+ and Mg 2+ /Mn 2+ ) (Binnenkade et al., 2018). The scientist also found that overexpression of the bolA gene, a transcriptional regulator, facilitates biofilm formation by regulating many related gene express processes (Silva et al., 2020). Beyond that, low concentrations of extracellular riboflavin resulted in an upregulation transcription of the ornithine decarboxylase-encoding gene speC, which facilitates the biofilm formation of S. oneidensis (Silva et al., 2020). So, except electrode surface modification, genetic manipulation can also regulate biofilm formation in a sample and stable method.

Construct Genetic Manipulation Platform
Genetic manipulation platform development, especially nonmodel organism, not only removes gene editing restrictions but also broaden the product type. Fortunately, the developed synthetic biotechnology of the CRISPR-related toolset provides new possibilities for reprogramming the gene module in electroactive microorganisms. By fusing Cas9 nickase (Cas9n (D10A)) with cytidine deaminase (rAPOBEC1), Cheng et al. successfully developed the pCBEso system in S. oneidensis, whose double-locus simultaneous editing efficiency reached up to 87.5%. Compared with others, this system did not require doublestrand break or repair templates and was successfully used for broadening carbon source utilization spectra for S. oneidensis . The developed CRISPR-ddAsCpf1 system achieved 100% gene repression reported by green fluorescent protein (GFP). By repressing the gene related to extracellular electron transfer, they realized the enhancement of L-lactate metabolism-related genes expression and riboflavin production, resulting in rediverting electron flux . Ng's group also applied CRISPR interference (CRISPRi) targeted to the genes and redirection carbon flux of S. oneidensis, combined with integrating gene cluster coding the glucokinase, GroELS chaperone, and ALA synthase under dual T7 promoters, targeted product (5-aminolevulinic acid) improved by 145-fold (Yi and Ng, 2021). Yang's group successfully explored a way to produce n-butanol (160 mg/ L) through engineered S. oneidensis MR-1. The gene modules encoding alcohol dehydrogenase, CoA transferases, and acetyl-CoA synthetase were integrated into the plasmid and worked in the bacteria (Jeon et al., 2018). These genetic manipulation platforms constructed would accelerate the robust construction of engineered strain with superior performance electrically driven carbon neutrality.

Accelerate Electron Transfer Rate
Synthetic biotechnology can also be employed to modify and reconstitute the related pathways and regulation strategies to enhance extracellular electron transfer (EET) efficiency. The scientist developed a population-state decision system based on quorum sensing to allocate cellular resources, which change the predominant metabolic flux from growth to EET in the latter, resulting in EET enhancement up to 4.8-fold . Dundas et al. designed a series transcriptional logic gate to regulate and control the EET flux in S. oneidensis, in which the EET pathway-related parts of CymA/MtrCAB were systematically modified (Dundas et al., 2018). These works provide novel and powerful methods to control and regulate the EET, which lay the foundation for developing an intelligently and effectively synthetic biotechnology tool. The cytochrome c network is a crucial module that bridges the electron transfer between intracellular and extracellular environments, including c-Cyts CymA, bc1 complex, TorC, and SirD ( Figure 5). Sun et al. constructed engineered S. oneidensis whose NapB, FccA, and TsdB were depleted, and CctA was overproduced, resulting in higher power density in MFCs (436.5 mW/m 2 , 3.62-fold than that of wild type) . At the same time, soluble c-type cytochromes (c-Cyts) also enhance the extracellular electron shuttling under electron acceptor-limited conditions . The scientists also attempted to enhance the electron transfer by focusing on another crucial factor-cAMP, for cAMP-cyclic adenosine 3′,5′-monophosphate receptor protein (CRP) regulates the multiple EET-related pathways (Vellingiri et al., 2019). Scientists constructed a cyaC-OE mutant that expresses higher intracellular cAMP concentration, five times higher than that in the wild-type strain, resulting in a two-fold higher current than the wild-type strain (Kasai et al., 2019). Cheng et al. expressed exogenous adenylate cyclase encoding gene from the Beggiatoa sp. in S. oneidensis MR-1, enhancing EET capacities (Cheng ZH et al., 2020).

CONCLUSION AND PERSPECTIVE
On the one hand, CO 2 emitted from fossil fuels and the productive human activity was the main factor for extreme climate change and global warming. On the other hand, CO 2 is also a carbon source, catalyzing more valuable products. Cyanobacteria are a natural microorganism that can spontaneously convert CO 2 to many chemicals. At the same time, synthetic biotechnology was also employed to construct engineered bacteria by introducing the heterogeneous CO 2 fixation-related gene for carbon neutrality. Computational analysis was also another powerful tool to identify and design pathways with a more favorable thermodynamic driving force for CO 2 fixation (Satanowski et al., 2020;Chou et al., 2021). Beyond that, electrically driven microbial and enzyme engineering was also suitable for CO 2 fixation with high efficiency. Thus, combined synthetic biotechnology with electrochemistry possesses the full advantage of both for carbon neutrality, which can not only broaden the product scope but also harvest high energy conversion efficiency.
Whether inartificial CO 2 autotrophic organism or a heterotrophic model organism, synthetic biotechnology tools play a crucial role in editing genes, rediverting metabolic pathways, endowing them with new functions, optimal enforcement efficiency, and most abundant resources. Based on this, scientists carried out milestone work that converts the heterotrophic organism of E. coli (Figure 2) (Antonovsky et al., 2016;Gleizer et al., 2019;Bang et al., 2020) and P. pastoris to autotroph and growth on CO 2 (Figure 3) (Gassler et al., 2020). These great works will pave the way for the CO 2 fixation through microorganisms and the great dream of carbon neutrality. However, the CO 2 fixation rate was slow and insufficient to satisfy the conversion of CO 2 to the chemical product with high efficiency. Thus, electrochemical combined with synthetic biotechnology spawned a new revolution for CO 2 fixation efficiency. By developing a chemoenzymatic system, CO 2 was first fixed through electrochemical to form methanol, coupling with multi-step enzymatic reaction, CO 2 was converted to starch at last with a rate~8.5-fold higher than starch synthesis in maize . This is a typical case in fuse electrochemical synthetic biotechnology involvement, which gives attention to both efficiency and product quality. Beyond that, the success of the cell-free model is also pinning its hopes on enzymes (such as formate dehydrogenase and carboxylase), whose design and engineering can also accelerate the rate of CO 2 fixation. Thus, some novel analytical (Zhuang et al., 2021) methods and research tools (Zhuang et al., 2020) can also show extraordinary talents in illuminating the enzyme's catalytic mechanism.
Besides, it is also an important and promising field that equips microorganisms with highly efficient light-harvesting inorganic semiconductors to realize light-driven carbon fixation (Brown and king, 2020). By employing cadmium sulfide nanoparticles, scientists not only enable the photosynthesis of acetic acid from carbon dioxide through Moorella thermoacetica (Sakimoto et al., 2016) but also enhance the CO 2 fixation pathway in E. coli (Hu et al., 2021). Furthermore, this technique also enhances the yields of L-malate and butyrate from glucose with theoretical yields (1.48 and 0.79 mol/mol) in E. coli (Hu et al., 2021). So, interdisciplinary light and/or electrically driven synthetic biotechnology will shine their light on CO 2 neutrality with more high value-added products and higher efficiency in the future.

AUTHOR CONTRIBUTIONS
XZ, YZ, and A-FX contributed in article planning, writing, and revision. AZ and BF contributed to article revision and writing. All authors contributed to the article and approved the submitted version.

FUNDING
The National Natural Science Foundation of China (No. 21978245) and the National Postdoctoral Program for Innovative Talents (No. BX20200197) funded this work.