Your new experience awaits. Try the new design now and help us make it even better

CORRECTION article

Front. Bioeng. Biotechnol., 28 November 2025

Sec. Biomechanics

Volume 13 - 2025 | https://doi.org/10.3389/fbioe.2025.1747668

Correction: Distalization of the mandibular first molar with clear aligners: a 3D finite element study

This article is a correction to:

  1. Distalization of the mandibular first molar with clear aligners: a 3D finite element study

    1. Read original article
Fujia Kang,&#x;Fujia Kang1,2†Yifei Xu&#x;Yifei Xu3†Xinyan Zhao,Xinyan Zhao1,2Zhen Lu,Zhen Lu1,2Dongning Li,Dongning Li1,2Jiamin Zhao,Jiamin Zhao1,2Yibao LiYibao Li4Menghong Li, Menghong Li1,2*Kun Qi, Kun Qi1,2*
  • 1Key Laboratory of Shaanxi Province for Craniofacial Precision Medicine Research, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China
  • 2Department of Orthodontics, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China
  • 3Department of Oral Anatomy and Physiology and TMD, School of Stomatology, Air Force Medical University, Xi’an, Shaanxi, China
  • 4School of Mathematics and Statistics, Xi’an Jiaotong University, Xi’an, Shaanxi, China

A Correction on
Distalization of the mandibular first molar with clear aligners: a 3D finite element study

by Kang F, Xu Y, Zhao X, Lu Z, Li D, Zhao J, Li Y, Li M and Qi K (2025). Front. Bioeng. Biotechnol. 13:1665588. doi: 10.3389/fbioe.2025.1665588

Affiliations 1 and 2 were erroneously given as “1Hospital of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China,

2Department of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China.”

Affiliations 1 and 2 have been corrected to “1Key laboratory of Shaanxi Province for Craniofacial Precision Medicine Research, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China.

2Department of Orthodontics, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China”.

The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: clear aligner, tooth movement, molar distalization, finite element analysis, orthodontics

Citation: Kang F, Xu Y, Zhao X, Lu Z, Li D, Zhao J, Li Y, Li M and Qi K (2025) Correction: Distalization of the mandibular first molar with clear aligners: a 3D finite element study. Front. Bioeng. Biotechnol. 13:1747668. doi: 10.3389/fbioe.2025.1747668

Received: 16 November 2025; Accepted: 17 November 2025;
Published: 28 November 2025.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2025 Kang, Xu, Zhao, Lu, Li, Zhao, Li, Li and Qi. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Kun Qi, MzM3MDg5ODBAcXEuY29t; Menghong Li, bGltZW5naG9uZ0B4anR1LmVkdS5jbg==

†These authors have contributed equally to this work

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.