Editorial: Perspectives on Carbon Dioxide Capture and Conversion
Diana C. S. Azevedo
Sebastiao M. P. Lucena
Enrique Rodríguez-Castellón
Carlos Wexler- 1Federal University of Ceara, Fortaleza, Brazil
- 2University of Malaga, Málaga, Spain
- 3University of Missouri, Columbia, KY, United States
Editorial on the Research Topic
Perspectives on Carbon Dioxide Capture and Conversion
If we were to establish a year for the discovery of global warming caused by the concentration of greenhouse gases in the atmosphere, this year is 1988. In the summer of that year, the highest temperatures in the historical series of data collected so far were recorded. Moreover, atmospheric simulators had become so accurate that all existing models, validated from the reproduction of climate historical records, showed significant global warming when greenhouse gases were added (Weart, 2008). Today, more than 30 years later, the scientific community has produced a huge knowledge base around CO2 capture materials and processes, and the present research topic offers a nice sample of such efforts. From the point of view of materials, we present the prospects of conventional materials such as activated carbons, tailored to capture CO2 either as synthesized (Prauchner et al.) or by post-synthesis impregnation (Giraldo et al.). Mesoporous silicas belong to the group of very stable materials with a low CO2 adsorption capacity per se; however, they are preferential candidates for functionalization with amino silanes, which considerably increase their CO2 capture capacity (Vilarrasa-García et al.). The research topic also includes materials that weakly bind CO2 while keeping a relatively high uptake, such as the aluminum phosphate molecular sieves (Pérez-Botella et al.). Important techno-economic considerations of capture processes are considered (Danaci et al.), and the state of art of CO2 capture via mineralization of steel slag (Zhao et al.) is presented. Finally, new bed-forming techniques based on additive manufacturing are presented using the new material ZIF-8 (Verougstraete et al.) from the class of metal–organic frameworks (MOFs).
We hope that this collection will be useful both as an introduction to the subject of CO2 capture and as a relevant showcase of the latest research associated with the topic.
Author Contributions
SL wrote the first draft. DA, ER-C, and CW revised the editorial.
Conflict of Interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
References
Keywords: CO2, activated carbon, mesoporous silica, additive manufacturing, aluminophosphate molecular sieves, techno-economic analysis, ZIF–8
Citation: Azevedo DCS, Lucena SMP, Rodríguez-Castellón E and Wexler C (2021) Editorial: Perspectives on Carbon Dioxide Capture and Conversion. Front. Chem. 9:664979. doi: 10.3389/fchem.2021.664979
Received: 06 February 2021; Accepted: 15 February 2021;
Published: 14 April 2021.
Edited and reviewed by:
Valeria Conte, University of Rome Tor Vergata, ItalyCopyright © 2021 Azevedo, Lucena, Rodríguez-Castellón and Wexler. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Diana C. S. Azevedo, diana@gpsa.ufc.br