Recent applications of dioxinone derivatives for macrocyclic natural product and terpenoid synthesis

Dioxinone derivatives, a class of acetoacetate derivatives, have attracted widespread attention because of their multiple reactive sites, high reactivity, unique chemical properties, and potential synthetic applications. The dioxinone group is also stable under a wide range of reaction conditions, including strong acids, as well as a variety of transition-metal-catalysed processes, such as olefin metathesis and Pd-mediated cross-coupling. The inherent reactivity and diverse applications of dioxinones make them valuable reactive intermediates in organic synthesis. The conversion of dioxinones to acylketenes and their subsequent nucleophilic capture is also an excellent strategy for synthesising β-keto acid derivatives, which can be applied even in complex molecular synthesis. This review focuses on the recent advances in the application of dioxinones in synthetic method research and the total synthesis of natural products, highlighting the exceptional utility of these synthetic methodologies in the construction of macrocyclic cores and terpenoid skeletons. In particular, successful transformations of dioxinone fragments are discussed.


Introduction
Chemistry has developed rapidly since its inception as a field of study in the 17th century. Chemists have made outstanding progress in the development of new reagents, reactions, and strategies for selectively and efficiently transforming organic compounds. These advances have been so profound that many highly complex natural products have been obtained through chemical synthesis. The development and utilisation of new reagents remain an area of intense interest in organic chemistry to maximise efficiency and practicability in total synthesis.
Among the numerous reagents used in organic chemistry, dioxinone derivatives have received considerable attention from organic chemists because of their multiple reactive sites, high reactivity, unique chemical properties, and potential synthetic applications.

OPEN ACCESS EDITED BY
Moreover, dioxinone derivatives are increasingly being applied across a variety of research areas, including agrochemical development, natural product synthesis, and as chemical tools for a wide range of biological investigations.
Several factors have contributed to the popularity of dioxinone derivatives. Compound 1 is practical to use because it is inexpensive to prepare on a large scale using readily available commercial raw materials. Indeed, many chemical suppliers currently market 1 at reasonable prices ($ 290/kg for bulk quantities). More importantly, the steps used to synthesize various organic synthetic building blocks from 1 are typically robust, straightforward, and broad in scope.
Various innovative methods have been developed for the preparation of dioxinone derivatives. Currently, two highly practical procedures (Scheme 1) are used by a large majority of chemical suppliers to produce 1. The first method is a one-pot procedure using tert-butyl acetoacetate derivatives 6 as the starting materials in the presence of concentrated sulfuric acid, acetic anhydride, and acetone to obtain the dioxinone derivatives (route A) (Fuse et al., 2014). The other method uses meldrum's acid and acid chloride 7 by a practical twostep procedure (route B) (Aoki et al., 2015).
Dioxinone derivatives first entered the purview of chemists as organic synthetic building blocks in the 1950s and have gradually become widely used. In 1989, Winkler reported the asymmetric synthesis of perhydrohistrionicotoxin (Winkler Harshberger, 1989), which was the first application of dioxinone in the total synthesis of a natural product. Dioxinone derivatives demonstrate multiple chemical properties because they can be considered a product of acetoacetate protected by acetone. There are several distinct types of this chemistry (using compound 1 as an example in Scheme 1): 1) The direct reaction of C-7 in 1 with a wide range of bases (e.g., MHMDS or LDA) proceeds to give 2 or enol silyl ethers (Scheme 1, type 1) in high yields. Kalesse reviewed the application of dioxinones in vinylogous aldol reactions in 2005 (Kalesse, 2005). 2) Compound 1 enables clean and high-yield additions of a very wide range of diverse nucleophiles, including organo-magnesium, lithium, and zinc reagents; stabilised carbanions exemplified by enolates; and numerous hydride reagents (Scheme 1, type 2). Compound 1 can also be converted to an acylketene reactive intermediate 5) under high-temperature conditions, exhibiting rich chemistry (Scheme 1, type 4). Reaction types 2 and 4, which provide direct access to β-keto lactones and βketo lactams, respectively, have been effectively utilised in complex, target-directed synthesis. Intermolecular or intramolecular trapping of reactive acylketenes by nucleophiles gives rise to valuable structures and enables the execution of challenging and delicate bond formations that might be difficult to achieve using alternative synthetic strategies. Sorensen reviewed the application of dioxinones to bond formation by intermolecular and intramolecular trappings of acylketenes in the total synthesis of large-ring natural products in 2009 (Reber et al., 2009). 3) Moreover, a cyclisation-aromatisation cascade process can be accomplished by an acid-catalysed reaction with the dioxinone derivatives 9, which serves as an electron-rich reagent widely used in the synthesis of resorcylate natural products (Scheme 1, type 3).
This review aims to highlight recent strategic applications of dioxinone derivatives in natural product synthesis that were not covered in previous reviews (Kalesse, 2005;Reber et al., 2009), and emphasise the significant role they play in generating molecular skeletons. Only representative examples in which dioxinones are used as a crucial step in the construction of either the core structure or the key structural motif of the target molecule are presented. General applications of the selected examples of total synthesis are grouped based on the natural product types, including macrocyclic natural products, terpenoids, and some applications in research on synthetic methods, with a particular focus on studies from the last decade.

Macrocyclic natural product synthesis
The most common application of acylketenes in organic synthesis is the preparation of β-keto acid derivatives for construction of macrocyclic natural product frameworks, SCHEME 2 Scheidt's synthesis of neopeltolide and exiguolide.
Frontiers in Chemistry frontiersin.org 03 which are widely used in the synthesis of macrolides and macrolactams. Boeckman and Pruitt were the first to use dioxinones as precursors to acylketenes in the synthesis of complex natural products featuring macrolactones and macrolactams, as reviewed by Sorensen (Reber et al., 2009). Here, we briefly introduce other studies. In this section, select recent examples are presented to illustrate contemporary solutions to problems involving dioxinones.
In 2009, Scheidt and coworkers reported the successful synthesis of neopeltolide (Scheme 2, Custar et al., 2008Custar et al., , 2009. Dioxinone 1 was used as an important functional block to construct intermediate 11 via a vinylogous aldol reaction. After condensation, deprotection of TBS, and oxidation, key intermediate 12 was obtained. Macrocyclic 13 was successfully acquired in 25% yield by cyclisation via an intramolecular Prins reaction promoted by Sc(OTf) 3 .
In 2011, This group constructed the exiguolide skeleton using the same strategy via two Prins cyclisations and ultimately completed the total synthesis of exiguolide (Scheme 2, Crane et al., 2011). The first Prins reaction was successfully mediated by BF 3 ·Et 2 O with compounds 15 and 16 to produce 17 in 45% yield. After multiple transformations, the second key Prins reaction was promoted by Sc(OTf) 3 to construct macrocyclic intermediate 19 in 66% yield.
Dioxinone was also used as an important synthetic block to provide the skeleton in the synthesis of okilactomycin by Scheidts' group (Scheme 3, Tenenbaum et al., 2011). Using copper-catalyzed vinylogous aldol reaction conditions with dioxinone silyl enol ether and aldehyde 20, β-hydroxy dioxinone 21 was formed in 70% yield and 10: 1 diastereomeric ratio favoring the desired product. After multistep transformations to obtain 22, treatment of it with KOEt smoothly provided a β-ketoester, where the protecting group was removed with HFpy to afford 23 without any observed lactonization. The conditions of the stereoselective coupling of 23 and 24 were TMSOTf in DCM, and led to the desired 25 in 60% yield and as a 13:1 mixture of diastereomers favoring the desired 2,6-cis isomer. Ultimately, (-)-okilactomycin has been achieved successfully.
Callipeltoside is a popular target for total synthesis because of its complex architecture and promising anti-tumour bioactivity (Zampella et al., 1996). Like the related compounds lyngbouilloside and lyngbyaloside, these two natural products feature a 14-membered macrolactone with a transannular hemiketal. In 2010, Hoye et al. (2010) reported the asymmetric total synthesis of the macrolide natural product callipeltoside A (Scheme 4). After a vinylogous aldol reaction with 26, acylketene macrolactonisation took place with a high degree of regioselectivity. Acylketene precursor 27 contains two unprotected hydroxyl groups, yet only the single constitutional isomer 28 was observed after heating this substrate in refluxing benzene. , Yadav et al. (2012 used almost the same strategy to build the skeleton in the total synthesis of callipeltoside A (Scheme 4). By employing a diastereoselective aldol addition from the C5-C14 aldehyde segment 29 and dienyl silyl ether, afforded the adduct 30 as the only product in 85% yield. After several steps, compound 31 was received in good yield. Thus, SCHEME 3 Scheidt's synthesis of okilactomycin.
Frontiers in Chemistry frontiersin.org 05 refluxing of a dilute solution of 31 in toluene induced the loss of acetone through thermal decomposition to evolve the acylketene intermediate 32, which was then trapped intramolecularly by the secondary hydroxy at C13 to generate the 14-membered lactone 33 in 84% yield. The final synthetic operation was carried out by using HF·Py to transform 33 to the C1-C14 skeleton of (-) callipeltoside A by removing the silyl group to form the requisite tetrahydropyran ring.
Similar strategies targeting the central macrolide were reported by Arseniyadis (ElMarrouni et al. 2011), Fuwa (Fuwa et al., 2015), and Taylor (Chang et al., 2015) (Scheme 4). Arseniyadis successfully used C-C bond formation via olefin metathesis with key intermediates 34 and 35; 36 was obtained by heating the dioxinone intermediate. Vinylogous aldol reaction was used to construct the key intermediate 38 to accomplish the subsequent 14-membered macrocyclic 39 in Fuwa's study. Taylor and coworkers prepared 41 from 40 to obtain key intermediate 43 using AgTFA; Then 43 served as the precursor for olefin metathesis. After the 14-membered macrocyclic 44 was obtained by olefin metathesis cyclization, lyngbyaloside C was synthesized multi-step functional group transformation.
In 2008, Barrett's group developed a new route (Navarro et al., 2008) to resorcylate natural products which was inspired by biosynthetic considerations and was based on macrocyclisation and transannular aromatisation of the dioxinone fragment (Scheme 5). The lactones 48 containing these units utilizing tandem late stage aromatization was obtained from 2,4,6-triketoester precursors 47, which was prepared with the dioxinone derivatives 45 by efficient trapping of the resultant ketene 46 with alcohols.
In their research (Miyatake-ondozabal and , key advanced intermediate 51 was obtained in 75% yield (E/Z > 20/1) via olefin metathesis using a Grubbs II catalyst. Then, 51 was converted into acyl ketene intermediate 52 under refluxing toluene, and intramolecular hydroxyl capture led to the formation of 18-membered macrocyclic lactone 53. The synthesis was completed via multistep transformations and transannular aromatisation. Barrett et al. have used this strategy from 2010 to 2018 in some brilliant studies on the synthesis of resorcylate type natural products.
Thermolysis of dioxinone in the presence of benzyl-protected erithritols 54a and 54b gave the triketo-esters 55a and 55b, SCHEME 5 Barrett's synthesis of resorcylate natural products.
(+)-Erythrin also could be prepared based on the same route in this work (Scheme 5, Basset et al., 2010). Upon heating in toluene, the dioxinones 57 was trapped with chiral alcohol to generate the ketene 58 and directly aromatized by reaction with cesium acetate followed by acetic acid to give the resorcylates 59 respectively in 74% overall yields. After the key RCM and deprotection of the acetonide moiety, aigialomycin D was achieved successfully (Scheme 5, Calo et al., 2009). In 2011, Barrett and coworkers (Scheme 5, Anderson et al., 2011) used one pot palladium(0)-catalyzed deallyation-decarboxylationketene trapping-aromatization to give the desired resorcylate 61 in 45% yield over three steps. Deprotection of the silyl ether and acid catalyzed cyclisation gave lactone 62 in 60% yield over two steps. Finally, regioselective methylation of 62 provided angelicoin B. The core resorcylate unit 65 of cruentaren A was synthesized by thermolysis of diketo-dioxinone 63 afforded the corresponding highly reactive ketene, which was trapped with 64 in 74% yield over two steps. After the ring closing by alkyne metathesis and methylation, the key intermediate 66 was obtained and finally cruentaren A was achieved in several steps from 66 (Scheme 5, Fouché et al., 2012). The C1 to C13 tetrahydropyranyl-resorcylate core of paecilomycin B was also synthesized by this strategy in 2018 (Scheme 5, Cookson et al., 2018). In addition to its usefulness for macrolide synthesis, dioxinone is also an excellent fragment for the nucleophilic addition of amines to form macrolactams. In 2016, Kalesse reported the synthesis of aetheramide A, which is a highly potent anti-HIV reagent (Scheme 6, Gerstmann and Kalesse, 2016). In their research, to access precursor 72, dioxinone 69 was used as a Horner-Wadsworth-Emmons (HWE) resource in an HWE reaction. The dioxinone moiety was introduced through this olefination, and the final TBS deprotection step completed the synthesis of polyketidic fragment 70 in 67% yield. After condensation with acid 71, mesitylene led to the formation of the acylketene intermediates, which were trapped intramolecularly SCHEME 6 Kalesse's synthesis of aetheramide A.
Frontiers in Chemistry frontiersin.org by the secondary amine. Deprotection was then carried out using HF-pyridine to give aetheramide A. This synthesis is particularly interesting because although there are various well-established procedures for macrolactamisations using unsubstituted dioxinones, examples with dioxinones bearing a methyl group are rare, possibly because of the considerably higher temperatures necessary to initiate the retro Diels-Alder reaction.
Captures of acylketenes are particularly useful in a synthetic context because sometimes medium and large rings can be formed, which are often difficult to synthesise using more typical methods. The diverse reactivities and applications of dioxinones make them valuable reactive synthetic blocks for macrocyclic natural products. Many similar synthetic studies have been reported (Rentsch and Kalesse, 2012;Dalby et al., 2013;Ogura et al., 2016), which will not be repeated here, in addition to those described earlier.

Terpenoid synthesis
Terpenoids are structurally intriguing natural products that have attracted extensive attention owing to their unique and complex structural characteristics and diverse biological activities. Dioxinone derivatives also play an important role in the total synthesis of some complex terpenoids.
In 2006, Narasaka et al. reported the asymmetric synthesis of sordarin and sordaricin (Scheme 7, Chiba et al., 2006). Sordarin has a tetracyclic cage-like structure with a glycosidic moiety which makes it particularly challenging to synthesize. They started with optically active 73, which could prepare 74 in five steps. Dioxinone 75 was used as an alkylation reagent and added dropwise to a mixture of 74 and LDA. After cleavage of N,N-dimethylhydrazone, the resulting ketone 76 was treated with sodium ethoxide in ethanol to give tricyclic keto ester 77 via deprotection of the acetonide group and subsequent condensation. Sordaricin was then obtained through multistep transformations, and glycosylation of sordaricin completed the synthesis of sordarin.
In 2011, Lee's group developed a novel route to construct the 5-6-5 tricyclic furanochroman skeleton of phomactin A via a Prins/Conia-ene cascade cyclisation (Scheme 7, Huang eta al., 2011). Phomactins represent a new class of platelet-activating factor (PAF) antagonists isolated from the marine fungus Phoma sp. and inhibit PAF-induced platelet aggregation (Sugano et al., 1991(Sugano et al., , 1996. Dioxinone 79 was obtained via a vinylogous aldol reaction between 78 and acetone. The product was then heated in toluene with the appropriate alcohol to give β-ketoester 80. Subsequently, a variety of factors of this cascade approach, including Lewis acids, solvents, and temperature, were SCHEME 7 Applications of dioxinones in Narasaka and Lee's studies. Frontiers in Chemistry frontiersin.org examined. This multifunctional intermediate successfully underwent a Prins/Conia-ene cascade cyclisation with the alkynaldehyde facilitated by In(OTf) 3 to give 81 in 66% yield. The desired tricyclic skeleton was obtained after several subsequent steps. In 2014, Barrett and Barrett (2014) reported the total synthesis of the complex natural product hongoquercin B, which has been isolated from extracts of an unidentified terrestrial fungus and exhibits antibiotic activity against vancomycin-resistant Enterococcus faecium and methicillin-resistant Staphylococcus aureus (Scheme 8, Roll et al., 1998;Ma et al., 2018). The key advanced intermediate 84 was formed via a decarboxylation allylation tandem aromatisation of 83. Treatment of ester 83 with Pd(PPh 3 ) 4 at room temperature gave a diketo-dioxinone intermediate, which was readily aromatised over silica gel to give resorcylate 84 in 66% yield over three steps. Notably, only the desired linear E,E-isomer was obtained in this sequence. Subsequent addition of BF 3 ·Et 2 O in dichloromethane furnished pentacyclic skeleton 85 in 60% yield by cascade cyclisation. The total synthesis of hongoquercin B was completed in two steps through functional group modifications.
Since the first example reported by Barrett in 2011, more than ten molecules have been synthesized using this approach via the cascade cyclisation-aromatization, which is an efficient and concise method for constructing dioxinone-resorcylate especially the terpene resorcylates and dihydroxy-isoindolinone derivatives. Barrett's works (Scheme 8) were carried out using dioxinone derivatives as an important synthetic building block to achieve the diketo-dioxinone ester, palladium catalyzed migratory, decarboxylative prenylation-aromatization sequence as the key cascade process to establish the core frameworks of natural products with the mild conditions, easy work-up, wide scopes and high yield.
In 2011, they developed a concise five-step synthesis to the E, F-ring system of lactonamycin (Jacques et al., 2011). Dioxinone ketoester 89 and chloride 90 were used to provide the key in intermediate. Then subsequent reaction of diketoester-dioxinone 91 with Pd(PPh 3 ) 4 and cesium carbonate resulted in decarboxylative prenyl migration and formation of the resorcylate 92. Amorfrutin A was obtained after the phenol methylation and saponification (Laclef et al., 2012). In 2012, Barrett and coworkers used different dioxinone-diketoesters 93 and 95 to provide the corresponding products 94 and 96 of the tandem process in good yields over several steps. Finally, they accomplished three terpene resorcylates angelicoin A, hericenone J and hericenol A in just five steps (Cordes et al., 2012). In 2012, Patel and completed the total synthesis of a Hsp90 nnhibitor AT13387. They started with ketoester 97 and gave the dioxinone-resorcylate 98 in 73% yield and obtained AT13387 after the saponification and condensation in total 3 steps from 97. Barrett's group finished the total synthesis of macrosporin , mycophenolic acid (Brookes et al., 2013) and methyl cristatate (George et al., 2013) utilizing this tandem strategy in 2013. In general, this conversion strategy has great advantages in the synthesis of natural products containing aryl-phenol structures and provides a new convenient route for this kind of natural product.
In 2015, Zhao and Maimone (2015) used dioxinone as a key building block to construct key intermediate 114 in the asymmetric total synthesis of chatancin (Scheme 9). A SCHEME 8 Barrett's synthesis of terpene resorcylates and dihydroxy-isoindolinone derivatives.
Frontiers in Chemistry frontiersin.org vinylogous adol reaction was employed to convert aldehyde 111 and an enol ether into a secondary alcohol, followed by treatment with DMP to furnish dioxinone 112. After heating in toluene and the intramolecular capture of acylketenes, treatment of the product with Tf 2 O successfully gave 113. Pd-catalysed carbonylation of 113 dissolved in a mixture of acetonitrile and methanol successfully provided desired product 114. It was discovered that heating a toluene solution of the ester for 4 days smoothly elicited a [4 + 2] cycloaddition in high yield. This process forged four stereocentres in a single operation. Equimolar amounts of diastereomers 114 and 1149 were formed during this process.

SCHEME 9
Maimone's protocol to synthesise the tricyclic skeleton of chatancin.

New synthetic methods research
Since early efforts on the synthesis of perhydrohistrionicotoxin in 1989, using dioxinone to build the β-keto acid derivatives used to access macrocyclic and terpenoid natural products has been investigated in many groups around the world. In this section, select recent examples illustrate contemporary methodologies for applications involving dioxinone derivatives.
In 2013, a new cycloaddition methodology to synthesise novel multisubstituted γ-butyrolactones was developed by Leleu et al. (Scheme 10, Peixoto et al., 2013). In this study, multisubstituted γ-butyrolactones 116 were prepared in a onestep procedure by capturing the thermal fragmentation of dioxinones in the presence of hydroxy ketones 115 under basic conditions. Various parameters were considered for the one-step synthesis of γ-butyrolactones, including the amount of base or dioxinone and the nature of the base. Ultimately, the use of 0.5 equiv. triethylamine and 1.5 equiv. dioxinone resulted in the highest yields. Under these conditions, acylfuranone 120 was prepared in one step from 117, 118, and 119 in 77% yield. This method was extended to the one-pot multicomponent synthesis of densely functionalized γ-butyrolactones. This diversityoriented approach provided expeditious access to various small-ring compounds with potentially high antimicrobial activities under mild conditions with easy handling procedures and a wide scope of substrates. This will most certainly find a broad range of applications in medicinal chemistry.
The palladium-catalysed arylation or vinylation of enolisable carbonyl and related compounds represents a viable and useful C-C bond-forming reaction, that is, widely applied in synthetic organic chemistry. In 2015, Lindhardt et al. developed a Pdcatalysed carbonylative coupling of aryl and vinyl halides with vinylogous enolates in which the C-C bond is formed exclusively at the γ-position (Scheme 11, Makarov et al., 2015). In this reaction, the conditions for the carbonylative coupling, including ligand, base, and solvent, were screened under Pd(dba) 2 catalysis. Ultimately, using Xantphos as the ligand and LiHMDS as the base, this reaction gave an 82% yield under 3 mol% Pd(dba) 2 catalysis in THF. The reaction was performed under mild conditions with various dioxinones and substituted aryl and alkenyl iodides to give aryl and alkenyl ketones 125 and 126, respectively. Dioxinone was coupled to a range of aryl and vinyl iodides to provide 3,5-dicarbonyl acids with complete γselectivity. Furthermore, the carbonylation reactions were performed at room temperature with stoichiometric amounts of carbon monoxide. To apply this reaction to natural product SCHEME 11 Pd-catalysed carbonylative couplings.
Frontiers in Chemistry frontiersin.org synthesis, first, substituted quinoline 127 was readily prepared from 2-nitrobenzoic acid in six steps. Subsequently, 13 C-SilaCOgen produced 13 C-labeled dioxinone 128 according to the standard conditions for carbonylative coupling in an excellent isolated yield of 85%. Dioxinone opening was then accomplished using ethanol in toluene, which was followed by syn-diastereoselective reduction of the two ketones, ultimately affording the 13 C-labeled ethyl ester of (±)-pitavastatin in 31% isolated yield over two steps. The synthesis of this corresponding 13 C-labeled product was to indicated that this carbonylative coupling reaction could be used to synthesize drug molecules and also demonstrate the origin of carbonyl groups.
In 2017, Zhang et al. reported the full details of a general and practical diastereoselective approach towards the synthesis of δ-amino acid derivatives by vinylogous Mannich reactions between N-tertbutanesulfinyl imines and dioxinone lithium dienolate (Scheme 12, Li et al., 2017). In this study, systematic screening of the reaction conditions, especially the base and Lewis acid, was conducted to optimise the yield and diastereoselectivity of this reaction. It was clear that the base and Lewis acid had a major influence on the reaction. Notably, the corresponding product (130, 1309 and 132, 132') was isolated in up to 87% yield and 40:1 d.r. in the presence of 2 equiv. BF 3 ·Et 2 O. With the scope of the diastereoselective vinylogous Mannich reactions having been investigated, a variety of aryl, alkyl, and cyclic substituted N-tert-butanesulfinyl aldimines and ketimines (129 and 131) were obtained in mild to excellent diastereoselectivities (d.r. 1.2:1 to >40:1) and yields (20%-96%) under optimised conditions. Moreover, heterocyclic-and fused-ring-substituted imines gave moderate to excellent yields and diastereoselectivities. In the proposed transition state model, the author inferred that the imine was activated by coordination with BF 3 , and Si-face addition of the dioxinone-derived lithium dienolate led to major products with S-configuration for the newly formed stereocentre. This reaction provides a novel method for the synthesis of amino acids and chiral amines. Most importantly, the corresponding products can undergo many valuable transformations. Additionally, this method provides a foundation for the synthesis of natural products.
Two years later, Zhang's group developed a practical method for the construction of an oxa-bridged bicyclic ring system via an oxidative-cleavage/Prins-cyclisation approach towards the synthesis of highly functional oxa-bridged seven-, eight-, and nine-membered rings (Scheme 12, Wang et al., 2019). Zhang

SCHEME 12
The application of dioxinone in Zhang's work.
Frontiers in Chemistry frontiersin.org et al. used various substituted aldehydes, ketones, and Weinreb amides as starting materials. Alcohol 133 was successfully obtained in two steps and set the stage for the proposed oxidative cleavage and Prins cyclisation. In the initial studies, oxidation by ozone provided a semiketal that formed an oxonium ion upon treatment with BF 3 ·Et 2 O, and cyclisation gave the desired oxa-bridged compound. According to the established route, Zhang et al. extended the general utility of this process to synthesise ring systems of other sizes, including 7/8/9-membered oxa-bridged rings. Substrates bearing cyclopentane, cyclohexane cycloheptane, and cyclooctane also reacted well and provided tetracyclic products. In addition, seven−eight fused, eight−eight fused, and nine-membered ring systems could be constructed using this methodology. Notably, 137 can also be obtained from ketone 135, which is the core skeleton of neoabyssomicin D. This straightforward method for the synthesis of oxa-bridged bicyclic ring systems in many natural products is flexible and enables the entry of virous of highly functionalized fused carbocycles.
Reactions are easy to handle, highly diastereoselective, and can be performed on the Gram scale. This process is applicable for the synthesis of natural products containing an oxa-bridged bicyclic core skeleton.

Conclusion
This review illustrates recent advances in the application of dioxinone derivatives to macrocyclic natural products, terpenoid synthesis, and new synthetic methods. Dioxinone derivatives have quickly become powerful, fascinating, and highly efficient tools in organic synthesis. Many researchers have contributed innovative and often practical methods that have established dioxinone derivatives as extremely versatile reagents for the robust and general synthesis of diverse classes of functional compounds, especially β-keto acid derivatives, even in complex natural products. The commercial availability in large quantities at low cost, the robustness and generality of its methods, and the prominence of macrocyclic and terpenoid natural products ensures that dioxinone-based strategies will continue to be some of the most extensively used methods in synthesis. Despite these achievements, new strategies and novel methodologies are both required and expected to facilitate the synthesis of complex molecules. However, due to the sensitivity of the dioxinone derivatives to strong base and high temperature, the application in synthesis is restricted to a certain extent. It is necessary to develop more novel dioxinone derivatives with diverse structure to make up for its defects and adapt to more extensive reaction conditions. We hope that organic chemists will continue to utilise dioxinone derivatives in their endeavours and make use of these multifunctional intermediates in the synthesis of even more complex natural products.

Author contributions
KW conceived and wrote the manuscript. All other authors (XZ and HZ) provided comments and discussion on the manuscript to aid its preparation.