Design and Simulation of a New QCA-based Low-power Universal Gate Provisionally Accepted
- 1Faculty of Computer Engineering, Najafabad Branch, Islamic Azad University, Iran
- 2Faculty of Electrical Engineering, Islamic Azad University of Najafabad, Iran
Quantum-dot Cellular Automata (QCA) is recognized in electronics for its low power consumption and high-density capabilities, emerging as a potential substitute for CMOS technology. GDI (Gate Diffusion Input) technology is featured as an innovative approach for enhancing power efficiency and spatial optimization in digital circuits. This study introduces an advanced four-input Improved Gate Diffusion Input (IGDI) design specifically for QCA technology as a universal gate. A key feature of the proposed 10-cell block is the absence of cross-wiring, which significantly enhances the circuit's operational efficiency. Its universal cell nature allows for the carrying out of various logical gates by merely altering input values, without necessitating any structural redesign. The proposed design showcases notable advancements over prior models, including a reduced cell count by 17%, a 29% decrease in total energy usage, and a 44% reduction in average energy loss. This innovative IGDI design efficiently executes 21 combinational and various sequential functions. Simulations in 18 nm technology, accompanied by energy consumption analyses, demonstrate this design's superior performance compared to existing models in key areas such as multiplexers, comparators, and memory circuits, alongside a significant reduction in cell count
Keywords: Improved gate diffusion input, Quantum-dot cellular automata, polarization, QCADesigner, low-power
Received: 20 Jan 2024;
Accepted: 01 May 2024.
Copyright: © 2024 Sadrarhami, Zanjani, Dolatshahi and Barekatain. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence: Dr. S. Mohammadali Zanjani, Faculty of Electrical Engineering, Islamic Azad University of Najafabad, Najafabad, Iran