Diverse cooling effects of green space on urban heat island in tropical megacities

Introduction

The world has been experiencing an inevitable trend of urbanization (Girardet, 2020). According to the World Urbanization Prospects report (United Nations, 2019), the urban population of the world will continue to rise and 90% of the increase concentrates in Asia and Africa. As cities continue to expand, roads and buildings replace some natural surfaces such as trees, water bodies and soil. The transformation of land use changes biophysical properties of the land surface, which could generate the local warming effect or urban heat island (UHI) effect (Oke, 1973; Arnfield, 2003). The UHI effects and global scale climate change are projected to cause a large number of extreme heat events, thereby contributing to heat-related mortality (Stone et al., 2014). It was estimated that with a 2.0°C increase in temperature, the annual heat-related mortality increased from 32.1 per million people in 1986 to 81.3 per million people in 2005 in China (Wang et al., 2019). Megacities in tropical regions of Asia have dense population density, and were predicted to experience more frequent and intense heatwaves for the next decades (Coleman, 2022). He 11th goal of United Nation’s sustainable development goals (SDGs) advocates making cities inclusive, safe, resilient, and sustainable (United Nations, 2015). Exploring the UHI effect and the effectiveness of mitigation measures are crucial for reducing heat risk and enhancing climate resilience in these cities.

Since spaceborne remote sensing can provide timely and objective observations over vast areas, spatiotemporal changes in surface urban heat island (SUHI) at local, regional and global scales were examined by using remotely-sensed land surface temperature (LST) data (Liu et al., 2020b; Weng 2009; Lu et al., 2019). Due to high cloud coverage, the amount of cloud-free and high quality remote sensing data in tropical regions is limited. In order to acquire remote sensing data with both high spatial and temporal resolution, spatiotemporal data fusion methods have been developed (Gao et al., 2006; Zhu et al., 2010). Gao et al. (2006) developed a Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM) to product daily surface reflectance data at a spatial resolution of 30 m. To address landscape heterogeneity, Zhu et al. (2010) further developed the enhanced spatial and temporal adaptive reflectance fusion model data fusion method (ESTARFM) to improve the accuracy of predicted images. The ESTARFM model achieved a satisfied accuracy in generating high spatio-temporal land surface temperature data in previous studies (Liu et al., 2020b).

Urban green space (UGS) including parks, street vegetation, green roofs, and woodlands is a commonly adopted measure to mitigate the UHI effect (Aram et al., 2019). UGS provides cooling effects to their surroundings through several processes such as shading and evapotranspiration. However, the cooling effect of UGS is spatially limited and generally decreases with distance from UGS. Previous studies reported that beyond a certain distance, the cooling effect of UGS patches disappears (Feyisa et al., 2014). To quantify the cooling effect of UGS, Yu et al. (2017) defined the intensity, range and efficiency of urban cooling island (UCI), as well as the threshold value of efficiency (TVoE). The TVoE has been used to acquire the most suitable patch size of urban green space in different study areas (Fan et al., 2019; Yang et al., 2020; Tan et al., 2021). Numerous evidences from field observations and remote sensing data proved that the cooling intensity and range of parks have a positive relationship with their areas (Lin et al., 2015; Algretawee 2022; Vaz Monteiro, 2016). Besides the size of green space, factors such as the composition, configuration, background temperature, neighboring vegetation cover of green space patches also impact their cooling effects (Akbari and Kolokotsa, 2016; Gillner et al., 2015; Yu et al., 2018b; Zhou et al., 2022).

Although the megacities in tropical Asia are vulnerable to extreme heat events, the unavailability of satellite data with both high spatial and temporal resolution hindered the in-depth investigation of urban heat islands and cooling effects in these cities (Giridharan, 2018). Uddin et al. (2022) used the day and night time temperature data provided by MODIS to quantify UHI in Dhaka. They found that the UHI effect was significantly related to population change, urban expansion, and meteorological factors such as cloud cover. Parvin and Abudu (2017) used Landsat data to assess UHI in Dhaka from 2002 to 2014 and reported that the temperature of all types of land cover was rising. Das et al. (2020) used MODIS data to study UHI seasonal changes in Kolkata and the relationship between UHI and vegetation. Halder et al. (2021) investigated the relationship between LST and vegetation and built-up areas using Landsat data and predicted the urban expansion in Kolkata in the next 30 years. Khamchiangta and Dhakal (2019) used Landsat data to study the temperature difference of different land cover types and the relationship between heat island and urban physical structure and non-physical factors in Bangkok. Although the heat island phenomenon has been investigated in previous studies, the analysis based on MODIS data failed to provide sufficient spatial details, while the observation of Landsat was relatively sparse in time. In addition, the regulation capacity of urban green space on thermal environment has barely been explored in these cities.

The megacities located in the tropical and subtropical regions have similar climate background conditions. By adopting standardized analysis methodologies, a comparative analysis of these cities could provide comprehensive information for the design and planning of green space in cities in tropical climate zones. Taking three megacities, Dhaka, Kolkata, and Bangkok, as the study area, the objectives of our study include 1) to generate land surface temperature data with high spatial and temporal resolution in winter season from 2000 to 2020 using data fusion model, 2) to quantify spatiotemporal changes in SUHI from 2000 to 2020 and explore their relationship with land cover using the enhanced LST data, and 3) to calculate the threshold value of efficiency (TVoE) of green space and analyze the relationship between their cooling effect and landscape metrics.

Study area and data sets

Study area

The study areas consist of three megacities in Asia: Dhaka, Kolkata, and Bangkok (Figure 1). The three megacities are located in tropical or subtropical regions, and the seasonality of temperature and precipitation in these cities are similar. They are all categorized as tropical savannah (Aw) climate zone in the Köppen-Geiger classification scheme (Beck et al., 2018). Dhaka is the largest city in Bangladesh and one of the major cities in South Asia with a population of over 15 million. Kolkata is the capital of West Bengal and the third largest city in India after Mumbai and New Delhi. In addition, it is the largest trading and commercial center in eastern India which is located 150 km north of the Bay of Bengal above the plains of the Ganges Delta (Nath et al., 2015). As the capital and largest city of Thailand, Bangkok is the second largest city in Southeast Asia. It is the center of politics, economy, trade, transportation, culture, science and technology, education, religion and all aspects of Thailand. Since the study focused on SUHI analysis, urban functional areas of each city were delineated as main study areas.

FIGURE 1

FIGURE 1. The geographic location of the study area. The red polygons represent the urban functional boundary. The underlying satellite images are from Landsat-8 OLI sensor.

Datasets and preprocessing

Landsat data of the study area covering five time periods: 2000, 2005, 2010, 2015, and 2020 were acquired in this study. It was obtained from the United States Geological Survey (USGS) (https://earthexplorer.usgs.gov/). One Landsat image with good data quality in each time period was selected for land cover classification and two Landsat images were both used for data fusion. The details about Landsat images for land cover classification are listed in Table 1 and the details for data used for fusion are listed in Table 2. Radiometric calibration and atmospheric correction were performed for the preprocessing of the Landsat images. The red, near-infrared, and thermal infrared bands were extracted for data fusion.

TABLE 1

TABLE 1. Landsat data used for land cover classification.

TABLE 2

TABLE 2. MODIS and Landsat data used for the ESTARFM data fusion.

MODIS data is provided by the United States National Aeronautics and Space Administration (NASA) (https://ladsweb.modaps.eosdis.nasa.gov/). The MODIS data we used includes surface reflectance data from MOD09GA and MOD09A1 products and daytime land surface temperature data from MOD11A1 and MOD11A2 8-day composite products. Due to the frequent cloud coverage in the study areas, cloud-free remote sensing images in winter months (December to February) were selected to predict the Landsat-like land surface temperature data (Table 2).

The original MODIS data is stored in HDF format. The bands selected from MOD09GA/MOD09A1 are B01 and B02, while Emis_31 and LST_Day_1 km bands were selected from MOD11A1/MOD11A2. Batch data processing codes were used to convert the original MODIS data to geotiff format using MODIS Reprojection Tool. The extracted data bands were converted to surface reflectance by applying the scale factor and offset using the following equation:

$L_{\lambda }=\mathrm{S}\mathrm{c}\mathrm{a}\mathrm{l}\mathrm{e}\mathrm{F}\mathrm{a}\mathrm{c}\mathrm{t}\mathrm{o}\mathrm{r}\ast DN+\mathrm{O}\mathrm{f}\mathrm{f}\mathrm{s}\mathrm{e}\mathrm{t}(1)$

where $L_{\lambda }$ is the surface reflectance of band λ; Scale Factor is the reflection coefficient of band; DN is the integer value of band λ, and Offset is the Offset of band.

The blackbody radiance can be calculated according to Eq. 2:

$B_{\lambda }\left(T_S\right)=\frac{K_1}{e^{K_2/T_s}-1}(2)$

where $K_1$ and $K_2$ are Landsat sensor parameters, and $T_s$ is the true reflectance of band LST_Day_1 km.

The radiant brightness in thermal infrared band received by MODIS satellite sensor is calculated using the radiative transfer equation:

$L_{\lambda }={\epsilon }_{\lambda }{\ast B}_{\lambda }\left(T_S\right){\ast \tau }_{\lambda }+L_{atm\_\lambda }^{\uparrow }+\left(1-{\epsilon }_{\lambda }\right)\ast L_{at{m}_{\_\lambda }}^{\downarrow }\ast {\tau }_{\lambda }(3)$

where $L_{\lambda }$ is the brightness of thermal infrared radiation with wavelength λ; $B_{\lambda }\left(T_S\right)$ is the blackbody radiation brightness when the surface temperature is $T_S$; ${\tau }_{\lambda }$ is the atmospheric transmittance along the path direction from the target to the sensor; ${\epsilon }_{\lambda }$ is the surface emissivity with wavelength λ; $L_{atm\_\lambda }^{\uparrow }$ and $L_{atm\_\lambda }^{\downarrow }$ are atmospheric upward radiation and downward radiation. Atmospheric transmittance, atmospheric upward radiation, and atmospheric downward radiation can be calculated using the atmospheric correction parameter calculator provided by NASA. The processed MODIS data were resampled to 30 m with the same resolution as Landsat data. The preprocessing process is automatically performed using IDL scripts.

Methodology

The data processing workflow mainly includes four steps (Figure 2): land cover classification, land surface temperature (LST) retrieval, surface urban heat island (SUHI) analysis and cooling effects analysis for urban green space (UGS).

FIGURE 2

FIGURE 2. The data processing workflow.

Land cover classification

Land cover types including impervious surface, bare land, green space and water were classified using Support Vector Machine (SVM) classifier in the study areas for 2000, 2005, 2010, 2015, and 2020. Training and validation samples were randomly collected on Google Earth. The definition criteria issued by the United Nations Human Settlements Programme was used to determine the urban functional boundary (Lu et al., 2022). The urban functional boundary could reflect the urbanization situation in the study area more accurately than the administrative boundary. According to the land cover classification, the pixels with above 50% built-up density was defined as the urban pixel, 25%–50% was defined as the suburban pixel, and less than 25% was defined as the rural pixel. The area within 100 m around the urban or suburban pixels was defined as the urban open space, and the urban, suburban and urban open space pixels were merged. Then, the area of each polygon was expanded by 25% to establish buffer zones. The buffer zone with the largest area is the urban functional area, and its boundary is the functional boundary of the city. The urban functional boundaries of the three study areas were created using the land cover classification results in 2020 (Figure 1).

Land surface temperature retrieval

We used ESTARFM to fuse Landsat and MODIS data in this study (Zhu et al., 2010). Landsat and MODIS images at the time of ${\mathrm{T}}_m$ and ${\mathrm{T}}_n$ were input. The model searched for pixels similar to the center pixel according the window size. The conversion coefficients were determined according to the weights of similar pixels. The predicted images were finally obtained by combing two predicted results.

Among the commonly used land surface retrieval algorithms, the algorithm based on radiative transfer equation has a solid physical basis and high inversion accuracy (Lu et al., 2020; Duan et al., 2021). Radiative transfer equation-based method and the fused Landsat-like data were used to retrieve the LST in our study. The red band and near-infrared band of the fused image were used to calculate the normalized difference vegetation index (NDVI) (Lu et al., 2015; Yuan et al., 2018):

$\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}=\frac{\left(\mathrm{N}\mathrm{I}\mathrm{R}-\mathrm{R}\mathrm{E}\mathrm{D}\right)}{\left(\mathrm{N}\mathrm{I}\mathrm{R}+\mathrm{R}\mathrm{E}\mathrm{D}\right)}(4)$

where NIR is the near-infrared band and RED is the red band of the image.

Then, the vegetation coverage ${\mathrm{P}}_{\mathrm{v}}$ was calculated using NDVI:

${\mathrm{P}}_{\mathrm{v}}=\frac{\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}-{\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}}_{\mathrm{S}\mathrm{o}\mathrm{i}\mathrm{l}}}{{\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}}_{\mathrm{V}\mathrm{e}\mathrm{g}}-{\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}}_{\mathrm{S}\mathrm{o}\mathrm{i}\mathrm{l}}}(5)$

where ${\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}}_{\mathrm{S}\mathrm{o}\mathrm{i}\mathrm{l}}$ is the NDVI value of the bare soil or the area without vegetation cover, and ${\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}}_{\mathrm{V}\mathrm{e}\mathrm{g}}$ is the NDVI value of the pixel completely covered by vegetation. We take the empirical value: ${\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}}_{\mathrm{V}\mathrm{e}\mathrm{g}}$ = 0.70 and ${\mathrm{N}\mathrm{D}\mathrm{V}\mathrm{I}}_{\mathrm{S}\mathrm{o}\mathrm{i}\mathrm{l}}$ = 0.05. When the NDVI of a pixel is greater than 0.70, the ${\mathrm{P}}_{\mathrm{v}}$ value is 1. When NDVI is less than 0.05, ${\mathrm{P}}_{\mathrm{v}}$ is set as 0.

The land surface emissivity was then calculated as:

$\epsilon =\mathrm{m}\ast P_v+n(6)$

by using typical constant values for the emissivity of vegetation and soil, m and n were set as 0.004 and 0.986, respectively (Sobrino et al., 2008).

The blackbody radiance was calculated using the radiative transfer equation:

$B_{\lambda }\left(T_S\right)=\frac{L_{\lambda }-L_{at{m}_{\lambda }}^{\uparrow }-\left(1-{\epsilon }_{\lambda }\right)\ast L_{at{m}_{\_\lambda }}^{\downarrow }\ast {\tau }_{\lambda }}{{\epsilon }_{\lambda }\ast {\tau }_{\lambda }}(7)$

The land surface temperature was calculated as:

$T_s=\frac{K_2}{\mathit{ln}\left(K_1/B_{\lambda }\left(T_s\right)+1\right)}(8)$

The temperature, $T_s$, was converted to degrees Celsius. The LST retrieval was performed automatically using IDL scripts.

Surface urban heat island analysis

The surface urban heat island intensity (SUHII) can be defined as the difference between the surface temperature of built-up area and green space (Estoque and Murayama, 2017; Bechtel et al., 2019). At each built-up area pixel, the SUHII was calculated using the following equation:

$\mathit{SUHII}=T_{\mathit{u}\mathit{r}\mathit{b}\mathit{a}\mathit{n}}-\overline{T_{\mathit{r}\mathit{u}\mathit{r}\mathit{a}\mathit{l}}}(9)$

where $T_{\mathrm{u}\mathrm{r}\mathrm{b}\mathrm{a}\mathrm{n}}$ is LST at pixel i and $\overline{T_{\mathrm{r}\mathrm{u}\mathrm{r}\mathrm{a}\mathrm{l}}}$ is the land surface average temperature of green space pixels. The average temperature of dense vegetation with NDVI greater than 0.55 in green patch within urban functional boundary was taken as the average temperature of green space.

The SUHII of the study area was further divided into five levels as: very low level ($\mathrm{S}\mathrm{U}\mathrm{H}\mathrm{I}\mathrm{I}$ <μ-std), low level (μ-std≤ $\mathrm{S}\mathrm{U}\mathrm{H}\mathrm{I}\mathrm{I}$ <μ-0.5*std), moderate level (μ-0.5*std≤ $\mathrm{S}\mathrm{U}\mathrm{H}\mathrm{I}\mathrm{I}$ <μ+0.5*std), high level (μ+0.5*std≤ $\mathrm{S}\mathrm{U}\mathrm{H}\mathrm{I}\mathrm{I}$ <μ+std), and very high level ($\mathrm{S}\mathrm{U}\mathrm{H}\mathrm{I}\mathrm{I}$ ≥μ+std). The average of the annual SUHII in the urban functional area (excluding water area) was calculated as:

${\mathit{SUHII}}_{cj}=\frac{{\sum }_{i=1}^n{\mathit{SUHII}}_{cij}}{\sum i}(10)$

where ${\mathrm{S}\mathrm{U}\mathrm{H}\mathrm{I}\mathrm{I}}_{cj}$ represents the average SUHII of city C in the jth year (j = 2000, 2005, 2010, 2015, and 2020), i is the pixel i, and ${\mathrm{S}\mathrm{U}\mathrm{H}\mathrm{I}\mathrm{I}}_{cij}$ represents the value of SUHII of city c at pixel i in the jth year.

Quantifying the urban cooling effect

UGS patches were manually selected using Google Earth for each study area. Due to the complex composition of green space, only green space patches with dense trees were selected in order to control the influencing variables and dense trees are recognised as having strong cooling effects. The selection of green space patches follows several rules: select green patches that are primarily covered by trees, green patches that have no internal water spots and are more than 300 m away from other green spaces or water bodies to avoid interaction between samples, and green patches smaller than 900 m² (30 m*30 m) were removed. Based on these rules, 73, 90, and 107 green space patches were delineated in Dhaka, Kolkata and Bangkok, respectively.

The intensity and range of urban cooling island (UCI) were used to quantify the cooling effect of green space patches in our study. The intensity of UCI was calculated as the temperature difference between the temperature of the green patch and the peak temperature at the first turning point when the temperature decreased (Yu et al., 2018b). The cooling range is the distance from the edge of the patch to the first turning point on the temperature curve (Yu et al., 2017). In order to study UGS cooling effect, we used Arcpy scripts to create 18 buffers for each green patch. Since the image resolution is 30 m, the buffer distance is set to 30 m, and then the average LST of each buffer was calculated. According to previous studies (Fan et al., 2019), 540 m (18*30 m) could cover far more of the cooling range that a green space patch can produce. Then, the UCI intensity and range of each green space patch were calculated. The patches which LST dropped at the beginning were treated as abnormal patches and removed in our analysis.

Yu et al. (2017) defined the threshold value of efficiency (TVoE) to find the optimal patch size of urban green space in different study areas. UCI intensity increases rapidly in the first half of the period with the increase of patch area, while the change of UCI intensity is no longer obvious after exceeding a certain value (Yu et al., 2018a; Yu et al., 2018b; Fan et al., 2019). The log function is used to fit the change in UCI intensity according to Eq. 11:

$y=a\ast \ln x+b(11)$

where a is the coefficient of the log function; b is the constant of the log function. The critical point where the slope of the log function is equal to one is defined as TVoE. The UCI intensity increases significantly with the increase in patch size before the TVoE, and increase insignificantly after exceeding the TVoE. The logarithmic regression was used to extract the TVoE or optimal green space patch size in each city.

Statistical analysis

Following previous studies (Sun and Chen, 2017; Fan et al., 2019; Yu et al., 2020; Shah et al., 2021; Tan et al., 2021), four dominant factors, namely normalized difference vegetation index (P_NDVI), land surface temperature (P_LST), shape index (P_SI) and area (P_Area) of UGS patches were selected to explore their influence on the cooling intensity and range of UGS. The shape index represents the complexity of patch shape. The larger the value of the shape index, the more complex the shape is. The four metrics, their definition and description are listed in Table 3.

TABLE 3

TABLE 3. Landscape metrics of the urban green space patches.

Pearson correlation was used to examine the relationship between the UCI effect and relevant landscape metrics. In specific, The UCI effect includes cooling intensity and cooling range and landscape metrics include P_NDVI, P_LST, P_SI, and P_Area. Pearson correlation coefficients were calculated to represent the magnitude of the correlation between UCI effect and relevant landscape metrics. Landscape metrics can affect UCI effect independently as well as interactively. Due to the possible correlation between landscape metrics, partial correlation analysis was performed to exclude the interaction between the landscape metrics.

Landscape metrics were used as independent variables, and the intensity and range of UCI effect were used as dependent variables. For landscape metrics with significant correlation relationship with UCI, regression analysis was conducted to analyze their effects on cooling effects. Because the relationship between the two is not necessarily a simple linear relationship, multiple functions were used to find the optimal regression. The R² represents the degree to which the dependent variable can be explained by the model. The coefficient reflects the expected change in the dependent variable for every unit change in the associated independent variable. The ordinary least squares (OLS) regression was performed using SPSS25.0 software.

Results

Land cover changes

Table 4 shows the validation results of land cover maps for these three Asian megacities in five time periods. The overall accuracies range from 85.75% to 91.78%, and the Kappa coefficients range from 0.82 to 0.88. For Dhaka and Kolkata, low overall accuracies were obtained in 2000. It might be caused by the relatively low image quality.

TABLE 4

TABLE 4. Accuracy of classified land cover maps.

The three cities have experienced significant urban development from 2000 to 2020. The urban areas have continuously expanded and green space has shrunk (Figure 3). The land cover changes in the three cities experienced similar changing trajectories. From 2000 to 2020, the green space of the three cities decreased by 1138.69 ha, 13894.52 ha, and 14416.24 ha respectively. Bare land decreased by 15257.98 ha, 20315.92 ha, and 109164.43 ha, respectively. The area of water bodies changed slightly in Dhaka and Kolkata. The impervious surface of each city expanded rapidly and increased by 16062.34 ha, 34707.11 ha, and 112698.38 ha respectively. The built-up areas in the three cities are rapidly expanding outward. The green space and bare land areas were mainly converted into impervious surface areas.

FIGURE 3

FIGURE 3. Land cover maps of the three megacities in 2000, 2005, 2010, 2015, and 2020.

Spatiotemporal variation of surface urban heat island

According to previous studies (Weng et al., 2014; Liu et al., 2020b), the observed Landsat data can be used to evaluate the accuracy of prediction results. The LST data obtained from the Landsat image on 13 December 2003 was used to estimate the accuracy of the LST from the predicted image. At the significance level of 0.01, MAD and RMSE between the two datasets were 0.26°C and 2.02°C, respectively, and Pearson’s value was 0.99. These results indicated that there was a strong correlation between predicted and observed LST (Figure 4).

FIGURE 4

FIGURE 4. Scatter plot between the estimated and the observed land surface temperature.

Figure 5 shows the spatial pattern changes of SUHII in the three cities from 2000 to 2020. The High Level and Very High Level areas in all three cities continue to extend outward. The high level areas are concentrated in the city center in 2000, while they spread to the whole functional area of the city in 2020. The SHUII in the three cities show different spatial patterns. Multiple high intensity areas were observed in Dhaka in 2020. Some marginal areas even have higher heat island intensity than the central areas, and most high-intensity areas are concentrated in the central and northwest of the city. The SUHI in Kolkata sprawls in all directions from the city center. In Bangkok, the SUHI gradually spreads to the east and west from 2000 to 2020. Compared with the land cover map, it is obvious that the spatial evolution of SUHI corresponds well with the spatial pattern of urban expansion.

FIGURE 5

FIGURE 5. SUHII in the three megacities in 2000, 2005, 2010, 2015, and 2020.

The temporal variations of SUHII and LST differences in the three cities were analyzed from 2000 to 2020 (Figure 6). The intensity of SUHI showed a monotonic increasing trends, and experienced a fluctuation in 2010 only in Bangkok. The changing slope of SUHII indicated that all three cities has been experiencing intensified SUHI effect. The continuous rise of SUHII is related with the increase of the difference between urban temperature and background temperature. The increase of urban surface temperature is significantly faster than that of background temperature. From 2000 to 2020, the urban surface temperature in three cities increased by 4.03°C, 8.39°C, and 4.47°C respectively, and the background temperature increased by 3.05°C, 6.97°C, and 3.74°C respectively.

FIGURE 6

FIGURE 6. Temporal variation of SUHII in the three megacities from 2000 to 2020.

Urban cooling effects

Figure 7 shows the logarithmic regression analysis results in each city. Based on the fitted logarithmic regression models, the TVoE values were estimated. The p-value of each city is less than 0.01, indicating that the relationship is significant. The TVoE is 0.37 ha (R² = 0.08), 0.77 ha (R² = 0.31) and 0.42 ha (R² = 0.12) in Dhaka, Kolkata and Bangkok, respectively.

FIGURE 7

FIGURE 7. Logarithmic regression analysis results in the three megacities.

Table 5 shows the statistics of landscape metrics and UCI intensity in the study areas. The mean patch size of greens space is larger in Kolkata and Bangkok than Dhaka. The shape index of green patches is largest in Bangkok. The average NDVI and LST of UGS are higher in Kolkata than the other two cities. The maximum UCI intensity ranges from 4.83°C in Bangkok to 8.07°C in Kolkata. The mean UCI intensity is highest in Kolkata and lowest in Dhaka. The maximum UCI range varies from 300 m in Bangkok to 420 m in Kolkata. The mean UCI range varies from 67 m in Bangkok to 81 m in Dhaka.

TABLE 5

TABLE 5. Statistics of landscape metrics, UCI intensity and range in the three megacities.

The correlation between landscape metrics and cooling effects in the megacities was also analyzed (Table 6). Among the four metrics, P_NDVI has a significant positive correlation with UCI intensity in Kolkata and Bangkok, but only has a significant positive correlation with UCI range in Bangkok. P_LST has a strong influence on UCI intensity and UCI range in all the cities, and the absolute values of Pearson correlation coefficients are greater than 0.50 on UCI intensity. For P_SI index, although correlation is negative on UCI intensity, the relationship is no significant. P_Area has a strong influence on UCI intensity and UCI range in the study areas.

TABLE 6

TABLE 6. Pearson correlation coefficients between the cooling effect and landscape metrics.

For the significant correlations, the effects of landscape metrics were further analyzed using OLS regression (Table 7). The increase in NDVI leads to increase of UCI intensity in Kolkata (coefficient = 8.37) and Bangkok (coefficients = 4.83) and increase of UCI range in Bangkok (coefficient = 201.99). An increase in average LST is significantly associated with the decrease of UCI intensity and range in all the megacities. The effect of LST on UCI intensity in strongest in Kolkata, and its effect on UCI range is most significant in Dhaka. In addition, the increase of patch area is significantly associated with the increase of UCI intensity and range in all the megacities.

TABLE 7

TABLE 7. Regression analysis between the cooling effect and landscape metrics.

Discussion

Spatiotemporal variation of surface urban heat island

The study areas have a tropical monsoon climate, which is cloudy and rainy almost all year round. These lead to the difficulty in obtaining continuous gap-free remote sensing images. The blending of MODIS and Landsat data produced LST data with high spatio-temporal resolution. Since MODIS data have a spatial resolution of 1 km, narrow rivers and small-sized land features cannot be identified from the LST images. Compared with Hassan et al. (2021) which used MODIS data to explore SUHI effect, our data captured more detailed information (Figure 5). The overall land cover change results are similar to previous studies (Estoque et al., 2017; Si et al., 2022). The comparison between the land cover and SUHI map indicates that the expansion of urban impervious surface areas affects the variations of heat island. Due to the different physical properties of visible band and thermal infrared band, the visible bands and thermal infrared bands were fused separately, which effectively improved the accuracy of data fusion. The data fusion methods and processing framework have been developed to improve the efficiency and accuracy of data fusion. Since data gaps often exist in MODIS data, Liu et al. (2020b) used a mean filter or linear regression to fill the missing pixels, which enhanced data availability and provided richer information for fusion. Since the moving window of ESTARFM model has a fixed size, Liu et al. (2020a) used surface heterogeneity information to develop a new spatiotemporal data fusion algorithm which could automatically adjust the size of the moving window. These methods can be tested and applied to improve the accuracy of fused LST data in future studies. Based on the multi-temporal land cover and SUHII maps, the variations of land cover and urban thermal environment from 2000 to 2020 was captured clearly in the study areas.

Urban cooling effects and policy implications

The maximum intensity of UCI was found to range from 4.83°C to 8.07°C, and the maximum range of UCI varies from 300 m to 420 m in the three megacities. Our result show that the largest park in Kolkata (39 ha) provided a maximum cooling island effect with an intensity of 8.07°C and range of 420 m. Surveys in different seasons, times of day, and measuring methods indicated that the maximum cooling of large-sized parks could reach 5°C–8°C (Aram et al., 2019; Yin et al., 2022). The average night-time cooling range of Kensington Gardens (111 ha) in London was found to vary between 20 and 440 m (Doick et al., 2014). The Heiwa Park (147 ha), Nagoya had a cooling distance of 200–300 m during night and 300–500 m during daytime (Aram e al., 2019). The mean cooling range and intensity of blue-green space are 150 m and 2.47°C in summer in Copenhagen (Yang et al., 2020). Different TVoE values to provide the optimal green space patch area were obtained for each megacity. Our study shows that the TVoE is 0.37 ha, 0.77 ha, and 0.42 ha in Dhaka, Kolkata and Bangkok, respectively. Geng et al. (2022) applied the TVoE method to 207 urban parks in 27 cities in East China with four different local background climates, including warm temperate sub-humid monsoon, northern subtropical sub-humid monsoon, northern subtropical humid monsoon, and middle subtropical humid monsoon climate, and found that the TVoE was significantly affected by the background climate. Fan et al. (2019) found that the TVoE was about 0.6–0.62 ha in Hong Kong, Jakarta, Mumbai, and Singapore, and 0.92–0.96 ha in Kaohsiung, Kuala Lumpur, and Taiwan. Tan et al. (2021) found that the TVoE of three-based green spaces was about 0.31 ha in Nanning, China. The TVoE was found to be 4.55 ha in Fuzhou (Yu, et al., 2017). According to Fan et al. (2019), the TVoE was influenced by the background temperature and NDVI of green patches in the seven hot humid Asian cities. With higher background temperature, the optimal size of green space will be larger. This agrees well with our study.

Our results indicate that UCI intensity is correlated negatively with P_LST and positively with P_NDVI and P_Area, while UCI range is correlated negatively with P_LST and positively with P_Area. Since dense vegetation can increase the NDVI value and UCI intensity, the planting of woody vegetation is suggested to be increased in urban green space. The results also show that patch shape index has insignificant relationship with UCI intensity and range. Thus, city planners should choose the most convenient and economic way to plan green patches in terms of green space shapes. The effective method to enhance UCI intensity and range include increasing the area and biomass of green space, and lowering its background temperature. However, different results have been reported in previous studies. Some studies found that the correlation between P_Area, P_NDVI, P_SI, and UCI was insignificant (Shashua-Bar and Hoffman, 2000; Derkzen et al., 2017). The cooling effect of UGS is a huge and complex system (Murakawa et al., 1991). It is not only related to these landscape metrics, but also to other factors such as local climate background (Oliveira et al., 2011), geographical location (Hathway and Sharples, 2012), detailed landscape components (Zhao et al., 2014), humidity and evaporation (Vaz Monteiro et al., 2016; Zhou et al., 2017). In addition, ordinary linear regression (OLS) was used in our study. The OLS assumes that a linear relationship exists between the dependent and the independent variables. It also assumes error terms are independent and normally distributed. Spatial regression models such as spatial lag model, spatial error model and geographically weighted regression can be applied in order to account for spatial dependencies in the relationship between characteristic of UGS and intensity and range of UCI (Bartesaghi-Koc., 2022; Baqa et al., 2022).

Urban ecology is a huge system, and any environmental factors are likely to affect urban cool effects (Yu et al., 2017). The proposed methods can be adopted in other tropical cities to obtain more generalizable findings about the effects of urban greening characteristics on cooling effects in tropical climates (Bartesaghi-Koc et al., 2018). The physical characteristics of trees, the patterns of planting, and arrangement can also influence the air temperature and cooling effects of green infrastructures (Hami et al., 2019). The effects of these factors can be investigated by using more precise and comprehensive approaches in future studies. Moreover, the cooling effect of city parks varies in different seasons (Yang et al., 2020). The investigation of cooling effect of urban green spaces in different seasons can provide more information for the design of UGS patches. Urban morphology/geometry parameters such as sky view factor, aspect ratio, building and tree height, vegetation structure or stratification, orientation, altitude may also influence the thermal environment in cities (Irger, 2014; Morakinyo et al., 2020). They affect air circulation, heat dissipation, and thermal energy absorption in open spaces and urban canyons (Morakinyo et al., 2017; Ahmadi Venhari et al., 2019; Bartesaghi-Koc et al., 2022). A comprehensive investigation of urban and green space characteristics on urban thermal environment will be helpful to the planning of urban spaces to mitigate heat and improve thermal environment of cities in future studies.

Conclusion

In this study, ESTARFM data fusion method was applied to produce enhanced LST data for SUHI analysis the tropical megacities. Impervious surface has increased by 30%–40% and bare land and green space have decreased by 20%–40% in the megacities from 2000 to 2020. The average SUHI intensity increased by 0.98°C, 1.42°C, and 0.73°C in Dhaka, Kolkata, and Bangkok, respectively in last 2 decades. The urban cooling effects analysis results indicate that the maximum intensity of urban cooling island ranges from 4.83°C in Bangkok to 8.07°C in Kolkata, and the maximum range of urban cooling island varies from 300 m in Bangkok to 420 m in Kolkata. The optimal patch size of green space is 0.37 ha, 0.77 ha, and 0.42 ha in Dhaka, Kolkata and Bangkok, respectively. UCI intensity is negatively correlated with P_LST and positively correlated with P_NDVI and P_Area, while UCI range was correlated negatively with P_LST and positively correlated with P_Area. The optimal size of green space patches is larger in cities with higher background temperature. These results provide valuable information for the scientific planning of urban green space to produce effective cooling effects. Comprehensive investigation of urban characteristics on thermal environment can be performed for heat mitigation and adaptation in future studies.

Data availability statement

The raw data supporting the conclusion of this article will be made available by the authors, without undue reservation.

Author contributions

All authors listed have made a substantial, direct, and intellectual contribution to the work and approved it for publication.

Funding

This research was funded by the Director Fund of the International Research Center of Big Data for Sustainable Development Goals (grant number CBAS2022DF016); and the National Natural Science Foundation of China (grant number 42071321).

Acknowledgments

The authors appreciate the comments and suggestions from the editors and reviewers.

Conflict of interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

The reviewer XS declared a shared affiliation with the authors except for ZF to the handling editor at the time of review.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

References

Ahmadi Venhari, A., Tenpierik, M., and Taleghani, M. (2019). The role of sky view factor and urban street greenery in human thermal comfort and heat stress in a desert climate. J. Arid Environ. 166, 68–76. doi:10.1016/j.jaridenv.2019.04.009

CrossRef Full Text | Google Scholar

Akbari, H., and Kolokotsa, D. (2016). Three decades of urban heat islands and mitigation technologies research. Energy Build. 133, 834–842. doi:10.1016/j.enbuild.2016.09.067

CrossRef Full Text | Google Scholar

Algretawee, H. (2022). The effect of graduated urban park size on park cooling island and distance relative to land surface temperature (LST). Urban Clim. 45, 101255. doi:10.1016/j.uclim.2022.101255

CrossRef Full Text | Google Scholar

Aram, F., García, E. H., Solgi, E., and Mansournia, S. (2019). Urban green space cooling effect in cities. Heliyon 5 (4), e01339. No. doi:10.1016/j.heliyon.2019.e01339

PubMed Abstract | CrossRef Full Text | Google Scholar

Arnfield, A. J. (2003). Two decades of urban climate research: A review of turbulence, exchanges of energy and water, and the urban heat island. Int. J. Climatol. 23 (1), 1–26. doi:10.1002/joc.859

CrossRef Full Text | Google Scholar

Baqa, M. F., Lu, L., Chen, F., Nawaz-ul-Huda, S., Pan, L., Tariq, A., et al. (2022). Characterizing spatiotemporal variations in the urban thermal environment related to land cover changes in karachi, Pakistan, from 2000 to 2020. Remote Sens. 14 (9), 2164. doi:10.3390/rs14092164

CrossRef Full Text | Google Scholar

Bartesaghi-Koc, C., Osmond, P., and Peters, A. (2018). Evaluating the cooling effects of green infrastructure: A systematic review of methods, indicators and data sources. Sol. Energy 166, 486–508. doi:10.1016/j.solener.2018.03.008

CrossRef Full Text | Google Scholar

Bartesaghi-Koc, C., Osmond, P., and Peters, A. (2022). Innovative use of spatial regression models to predict the effects of green infrastructure on land surface temperatures. Energy Build. 254, 111564. doi:10.1016/j.enbuild.2021.111564

CrossRef Full Text | Google Scholar

Bechtel, B., Demuzere, M., Mills, G., Zhan, W., Sismanidis, P., Small, C., et al. (2019). SUHI analysis using local climate zones—a comparison of 50 cities. Urban Clim. 28, 100451. doi:10.1016/j.uclim.2019.01.005

CrossRef Full Text | Google Scholar

Beck, H. E., Zimmermann, N. E., McVicar, T. R., Vergopolan, N., Berg, A., and Wood, E. F. (2018). Present and future Köppen-Geiger climate classification maps at 1-km resolution. Sci. Data 5 (1), 180214. doi:10.1038/sdata.2018.214

PubMed Abstract | CrossRef Full Text | Google Scholar

Coleman, J. (2022). Climate change made South Asian heatwave 30 times more likely. Nature 606. doi:10.1038/d41586-022-01444-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Das, P., Vamsi, K. S., and Zhenke, Z. (2020). Decadal variation of the land surface temperatures (LST) and urban heat island (UHI) over Kolkata city projected using MODIS and ERA-interim DataSets. Aerosol Sci. Eng. 4 (3), 200–209. doi:10.1007/s41810-020-00067-1

CrossRef Full Text | Google Scholar

Derkzen, M. L., van Teeffelen, A. J. A., and Verburg, P. H. (2017). Green infrastructure for urban climate adaptation: How do residents’ views on climate impacts and green infrastructure shape adaptation preferences? Landsc. Urban Plan. 157, 106–130. doi:10.1016/j.landurbplan.2016.05.027

CrossRef Full Text | Google Scholar

Doick, K. J., Peace, A., and Hutchings, T. R. (2014). The role of one large greenspace in mitigating London's nocturnal urban heat island. Sci. Total Environ. 493, 662–671. doi:10.1016/j.scitotenv.2014.06.048

PubMed Abstract | CrossRef Full Text | Google Scholar

Duan, S., Ru, C., Li, Z., Wang, M., Xu, Q., Li, H., et al. (2021). Reviews of methods for land surface temperature retrieval from Landsat thermal infrared data. J. Remote Sens. 25 (8), 1591–1617. doi:10.11834/jrs.20211296

CrossRef Full Text | Google Scholar

Estoque, R. C., and Murayama, Y. (2017). Monitoring surface urban heat island formation in a tropical mountain city using Landsat data (1987–2015). ISPRS J. Photogrammetry Remote Sens. 133, 18–29. doi:10.1016/j.isprsjprs.2017.09.008

CrossRef Full Text | Google Scholar

Estoque, R. C., Murayama, Y., and Myint, S. W. (2017). Effects of landscape composition and pattern on land surface temperature: An urban heat island study in the megacities of Southeast Asia. Sci. Total Environ. 577, 349–359. doi:10.1016/j.scitotenv.2016.10.195

PubMed Abstract | CrossRef Full Text | Google Scholar

Fan, H., Yu, Z., Yang, G., Liu, T. Y., Liu, T. Y., Hung, C. H., et al. (2019). How to cool hot-humid (asian) cities with urban trees? An optimal landscape size perspective. Agric. For. Meteorology 265, 338–348. doi:10.1016/j.agrformet.2018.11.027

CrossRef Full Text | Google Scholar

Feyisa, G. L., Dons, K., and Meilby, H. (2014). Efficiency of parks in mitigating urban heat island effect: An example from Addis Ababa. Landsc. Urban Plan. 123, 87–95. doi:10.1016/j.landurbplan.2013.12.008

CrossRef Full Text | Google Scholar

Gao, F., Masek, J., Schwaller, M., and Hall, F. (2006). On the blending of the Landsat and MODIS surface reflectance: Predicting daily Landsat surface reflectance. IEEE Trans. Geosci. Remote Sens. 44 (8), 2207–2218. doi:10.1109/TGRS.2006.872081

CrossRef Full Text | Google Scholar

Geng, X., Yu, Z., Zhang, D., Li, C., Yuan, Y., and Wang, X. (2022). The influence of local background climate on the dominant factors and threshold-size of the cooling effect of urban parks. Sci. Total Environ. 823, 153806. doi:10.1016/j.scitotenv.2022.153806

PubMed Abstract | CrossRef Full Text | Google Scholar

Gillner, S., Vogt, J., Tharang, A., Dettmann, S., and Roloff, A. (2015). Role of street trees in mitigating effects of heat and drought at highly sealed urban sites. Landsc. Urban Plan. 143, 33–42. doi:10.1016/j.landurbplan.2015.06.005

CrossRef Full Text | Google Scholar

Girardet, H. (2020). People and nature in an urban world. One Earth 2 (2), 135–137. doi:10.1016/j.oneear.2020.02.005

CrossRef Full Text | Google Scholar

Giridharan, R., and Emmanuel, R. (2018). The impact of urban compactness, comfort strategies and energy consumption on tropical urban heat island intensity: A review. Sustain. Cities Soc. 40, 677–687. doi:10.1016/j.scs.2018.01.024

CrossRef Full Text | Google Scholar

Halder, B., Bandyopadhyay, J., and Banik, P. (2021). Monitoring the effect of urban development on urban heat island based on remote sensing and geo-spatial approach in Kolkata and adjacent areas, India. Sustain. Cities Soc. 74, 103186. doi:10.1016/j.scs.2021.103186

CrossRef Full Text | Google Scholar

Hami, A., Abdi, B., Zarehaghi, D., and Maulan, S. B. (2019). Assessing the thermal comfort effects of green spaces: A systematic review of methods, parameters, and plants’ attributes. Sustain. Cities Soc. 49, 101634. doi:10.1016/j.scs.2019.101634

CrossRef Full Text | Google Scholar

Hassan, T., Zhang, J., Prodhan, F. A., Pangali Sharma, T. P., and Bashir, B. (2021). Surface urban heat islands dynamics in response to LULC and vegetation across South Asia (2000–2019). Remote Sens. 13 (16), 3177. doi:10.3390/rs13163177

CrossRef Full Text | Google Scholar

Hathway, E. A., and Sharples, S. (2012). The interaction of rivers and urban form in mitigating the urban heat island effect: A UK case study. Build. Environ. 58, 14–22. doi:10.1016/j.buildenv.2012.06.013

CrossRef Full Text | Google Scholar

Irger, M. (2014). “The effect of urban form on urban microclimate,” (Sydney: UNSW) (Doctoral dissertation.

Google Scholar

Khamchiangta, D., and Dhakal, S. (2019). Physical and non-physical factors driving urban heat island: Case of Bangkok Metropolitan Administration, Thailand. J. Environ. Manag. 248, 109285. doi:10.1016/j.jenvman.2019.109285

PubMed Abstract | CrossRef Full Text | Google Scholar

Lin, W., Yu, T., Chang, X., Wu, W., and Zhang, Y. (2015). Calculating cooling extents of green parks using remote sensing: Method and test. Landsc. Urban Plan. 134, 66–75. doi:10.1016/j.landurbplan.2014.10.012

CrossRef Full Text | Google Scholar

Liu, M., Liu, X., Dong, X., Zhao, B., Zou, X., Wu, L., et al. (2020a). An improved spatiotemporal data fusion method using surface heterogeneity information based on ESTARFM. Remote Sens. 12 (21), 3673. doi:10.3390/rs12213673

CrossRef Full Text | Google Scholar

Liu, X., Zhou, Y., Yue, W., Li, X., Liu, Y., and Lu, D. (2020b). Spatiotemporal patterns of summer urban heat island in Beijing, China using an improved land surface temperature. J. Clean. Prod. 257, 120529. doi:10.1016/j.jclepro.2020.120529

CrossRef Full Text | Google Scholar

Lu, L., Kuenzer, C., Wang, C., Guo, H., and Li, Q. (2015). Evaluation of three MODIS-derived vegetation index time series for dryland vegetation dynamics monitoring. Remote Sens. 7 (6), 7597–7614. doi:10.3390/rs70607597

CrossRef Full Text | Google Scholar

Lu, L., Qureshi, S., Li, Q., Chen, F., and Shu, L. (2022). Monitoring and projecting sustainable transitions in urban land use using remote sensing and scenario-based modelling in a coastal megacity. Ocean Coast. Manag. 224, 106201. doi:10.1016/j.ocecoaman.2022.106201

CrossRef Full Text | Google Scholar

Lu, L., Weng, Q., Guo, H., Feng, S., and Li, Q. (2019). Assessment of urban environmental change using multi-source remote sensing time series (2000–2016): A comparative analysis in selected megacities in eurasia. Sci. Total Environ. 684, 567–577. doi:10.1016/j.scitotenv.2019.05.344

PubMed Abstract | CrossRef Full Text | Google Scholar

Lu, L., Weng, Q., Xiao, D., Guo, H., Li, Q., and Hui, W. (2020). Spatiotemporal variation of surface urban heat islands in relation to land cover composition and configuration: A multi-scale case study of xi’an, China. Remote Sens. 12 (17), 2713. doi:10.3390/rs12172713

CrossRef Full Text | Google Scholar

Morakinyo, T. E., Kong, L., Lau, K. K.-L., Yuan, C., and Ng, E. (2017). A study on the impact of shadow-cast and tree species on in-canyon and neighborhood's thermal comfort. Build. Environ. 115, 1–17. doi:10.1016/j.buildenv.2017.01.005

CrossRef Full Text | Google Scholar

Morakinyo, T. E., Ouyang, W., Lau, K. K.-L., Ren, C., and Ng, E. (2020). Right tree, right place (urban canyon): Tree species selection approach for optimum urban heat mitigation - development and evaluation. Sci. Total Environ. 719, 137461. doi:10.1016/j.scitotenv.2020.137461

PubMed Abstract | CrossRef Full Text | Google Scholar

Murakawa, S., Sekine, T., Narita, K.-i., and Nishina, D. (1991). Study of the effects of a river on the thermal environment in an urban area. Energy Build. 16 (3), 993–1001. doi:10.1016/0378-7788(91)90094-J

CrossRef Full Text | Google Scholar

Nath, S. K., Adhikari, M. D., Devaraj, N., and Maiti, S. K. (2015). Seismic vulnerability and risk assessment of Kolkata City, India. Nat. Hazards Earth Syst. Sci. 15 (6), 1103–1121. doi:10.5194/nhess-15-1103-2015

CrossRef Full Text | Google Scholar

Oke, T. R. (1973). City size and the urban heat island. Atmos. Environ. 7 (8), 769–779. doi:10.1016/0004-6981(73)90140-6

CrossRef Full Text | Google Scholar

Oliveira, S., Andrade, H., and Vaz, T. (2011). The cooling effect of green spaces as a contribution to the mitigation of urban heat: A case study in lisbon. Build. Environ. 46 (11), 2186–2194. doi:10.1016/j.buildenv.2011.04.034

CrossRef Full Text | Google Scholar

Parvin, N. S., and Abudu, D. (2017). Estimating urban heat island intensity using remote sensing techniques in Dhaka city. Int. J. Sci. Eng. Res. 8, 289–298. doi:10.14299/ijser.2017.04.009

CrossRef Full Text | Google Scholar

Shah, A., Garg, A., and Mishra, V. (2021). Quantifying the local cooling effects of urban green spaces: Evidence from Bengaluru, India. Landsc. Urban Plan. 209, 104043. doi:10.1016/j.landurbplan.2021.104043

CrossRef Full Text | Google Scholar

Shashua-Bar, L., and Hoffman, M. E. (2000). Vegetation as a climatic component in the design of an urban street: An empirical model for predicting the cooling effect of urban green areas with trees. Energy Build. 31 (3), 221–235. doi:10.1016/S0378-7788(99)00018-3

CrossRef Full Text | Google Scholar

Si, M., Li, Z., Nerry, F., Tang, B., Leng, P., Wu, H., et al. (2022). Spatiotemporal pattern and long-term trend of global surface urban heat islands characterized by dynamic urban-extent method and MODIS data. ISPRS J. Photogrammetry Remote Sens. 183, 321–335. doi:10.1016/j.isprsjprs.2021.11.017

CrossRef Full Text | Google Scholar

Sobrino, J. A., Jimenez-Munoz, J. C., Soria, G., Romaguera, M., Guanter, L., Moreno, J., et al. (2008). Land surface emissivity retrieval from different VNIR and TIR sensors. IEEE Trans. Geosci. Remote Sens. 46 (2), 316–327. doi:10.1109/TGRS.2007.904834

CrossRef Full Text | Google Scholar

Stone, B., Vargo, J., Liu, P., Habeeb, D., DeLucia, A., Trail, M., et al. (2014). Avoided heat-related mortality through climate adaptation strategies in three US cities. PLoS One 9 (6), e100852. doi:10.1371/journal.pone.0100852

PubMed Abstract | CrossRef Full Text | Google Scholar

Sun, R., and Chen, L. (2017). Effects of green space dynamics on urban heat islands: Mitigation and diversification. Ecosyst. Serv. 23, 38–46. doi:10.1016/j.ecoser.2016.11.011

CrossRef Full Text | Google Scholar

Tan, X., Sun, X., Huang, C., Yuan, Y., and Hou, D. (2021). Comparison of cooling effect between green space and water body. Sustain. Cities Soc. 67, 102711. doi:10.1016/j.scs.2021.102711

CrossRef Full Text | Google Scholar

Uddin, A. S. M. S., Khan, N., Islam, A. R. M. T., Kamruzzaman, M., and Shahid, S. (2022). Changes in urbanization and urban heat island effect in Dhaka city. Theor. Appl. Climatol. 147 (3), 891–907. doi:10.1007/s00704-021-03872-x

CrossRef Full Text | Google Scholar

United Nations Department of Economic and Social Affairs, Population Division (2019). World urbanization prospects:the 2018 revision. New York, NY, USA: United Nations.

Google Scholar

United Nations (2015). Transforming our world:the 2030 agenda for sustainable development. New York, NY, USA: United Nations.

Google Scholar

Vaz Monteiro, M., Doick, K. J., Handley, P., and Peace, A. (2016). The impact of greenspace size on the extent of local nocturnal air temperature cooling in London. Urban For. Urban Green. 16, 160–169. doi:10.1016/j.ufug.2016.02.008

CrossRef Full Text | Google Scholar

Wang, Y., Wang, A., Zhai, J., Tao, H., Jiang, T., Su, B., et al. (2019). Tens of thousands additional deaths annually in cities of China between 1.5 °C and 2.0 °C warming. Nat. Commun. 10 (1), 3376. doi:10.1038/s41467-019-11283-w

PubMed Abstract | CrossRef Full Text | Google Scholar

Weng, Q., Fu, P., and Gao, F. (2014). Generating daily land surface temperature at Landsat resolution by fusing Landsat and MODIS data. Remote Sens. Environ. 145, 55–67. doi:10.1016/j.rse.2014.02.003

CrossRef Full Text | Google Scholar

Weng, Q. (2009). Thermal infrared remote sensing for urban climate and environmental studies: Methods, applications, and trends. ISPRS J. Photogrammetry Remote Sens. 64 (4), 335–344. doi:10.1016/j.isprsjprs.2009.03.007

CrossRef Full Text | Google Scholar

Yang, G., Yu, Z., Jørgensen, G., and Vejre, H. (2020). How can urban blue-green space be planned for climate adaption in high-latitude cities? A seasonal perspective. Sustain. Cities Soc. 53, 101932. doi:10.1016/j.scs.2019.101932

CrossRef Full Text | Google Scholar

Yin, S., Peng, L. L. H., Feng, N., Wen, H., Ling, Z., Yang, X., et al. (2022). Spatial-temporal pattern in the cooling effect of a large urban forest and the factors driving it. Build. Environ. 209, 108676. doi:10.1016/j.buildenv.2021.108676

CrossRef Full Text | Google Scholar

Yu, Z., Guo, X., Jørgensen, G., and Vejre, H. (2017). How can urban green spaces be planned for climate adaptation in subtropical cities? Ecol. Indic. 82, 152–162. doi:10.1016/j.ecolind.2017.07.002

CrossRef Full Text | Google Scholar

Yu, Z., Guo, X., Zeng, Y., Koga, M., and Vejre, H. (2018a). Variations in land surface temperature and cooling efficiency of green space in rapid urbanization: The case of Fuzhou city, China. Urban For. Urban Green. 29, 113–121. doi:10.1016/j.ufug.2017.11.008

CrossRef Full Text | Google Scholar

Yu, Z., Xu, S., Zhang, Y., Jørgensen, G., and Vejre, H. (2018b). Strong contributions of local background climate to the cooling effect of urban green vegetation. Sci. Rep. 8 (1), 6798. doi:10.1038/s41598-018-25296-w

PubMed Abstract | CrossRef Full Text | Google Scholar

Yu, Z., Yang, G., Zuo, S., Jørgensen, G., Koga, M., and Vejre, H. (2020). Critical review on the cooling effect of urban blue-green space: A threshold-size perspective. Urban For. Urban Green. 49, 126630. doi:10.1016/j.ufug.2020.126630

CrossRef Full Text | Google Scholar

Yuan, H., Wu, C., Lu, L., and Wang, X. (2018). A new algorithm predicting the end of growth at five evergreen conifer forests based on nighttime temperature and the enhanced vegetation index. ISPRS J. Photogrammetry Remote Sens. 144, 390–399. doi:10.1016/j.isprsjprs.2018.08.013

CrossRef Full Text | Google Scholar

Zhao, L., Lee, X., Smith, R. B., and Oleson, K. (2014). Strong contributions of local background climate to urban heat islands. Nature 511 (7508), 216–219. doi:10.1038/nature13462

PubMed Abstract | CrossRef Full Text | Google Scholar

Zhou, W., Wang, J., and Cadenasso, M. L. (2017). Effects of the spatial configuration of trees on urban heat mitigation: A comparative study. Remote Sens. Environ. 195, 1–12. doi:10.1016/j.rse.2017.03.043

CrossRef Full Text | Google Scholar

Zhou, W., Yu, W., and Wu, T. (2022). An alternative method of developing landscape strategies for urban cooling: A threshold-based perspective. Landsc. Urban Plan. 225, 104449. doi:10.1016/j.landurbplan.2022.104449

CrossRef Full Text | Google Scholar

Zhu, X., Chen, J., Gao, F., Chen, X., and Masek, J. G. (2010). An enhanced spatial and temporal adaptive reflectance fusion model for complex heterogeneous regions. Remote Sens. Environ. 114 (11), 2610–2623. doi:10.1016/j.rse.2010.05.032

CrossRef Full Text | Google Scholar