Navigating the Interface Between Landscape Genetics and Landscape Genomics

As next-generation sequencing data become increasingly available for non-model organisms, a shift has occurred in the focus of studies of the geographic distribution of genetic variation. Whereas landscape genetics studies primarily focus on testing the effects of landscape variables on gene flow and genetic population structure, landscape genomics studies focus on detecting candidate genes under selection that indicate possible local adaptation. Navigating the transition between landscape genomics and landscape genetics can be challenging. The number of molecular markers analyzed has shifted from what used to be a few dozen loci to thousands of loci and even full genomes. Although genome scale data can be separated into sets of neutral loci for analyses of gene flow and population structure and putative loci under selection for inference of local adaptation, there are inherent differences in the questions that are addressed in the two study frameworks. We discuss these differences and their implications for study design, marker choice and downstream analysis methods. Similar to the rapid proliferation of analysis methods in the early development of landscape genetics, new analytical methods for detection of selection in landscape genomics studies are burgeoning. We focus on genome scan methods for detection of selection, and in particular, outlier differentiation methods and genetic-environment association tests because they are the most widely used. Use of genome scan methods requires an understanding of the potential mismatches between the biology of a species and assumptions inherent in analytical methods used, which can lead to high false positive rates of detected loci under selection. Key to choosing appropriate genome scan methods is an understanding of the underlying demographic structure of study populations, and such data can be obtained using neutral loci from the generated genome-wide data or prior knowledge of a species' phylogeographic history. To this end, we summarize recent simulation studies that test the power and accuracy of genome scan methods under a variety of demographic scenarios and sampling designs. We conclude with a discussion of additional considerations for future method development, and a summary of methods that show promise for landscape genomics studies but are not yet widely used.

As next-generation sequencing data become increasingly available for non-model organisms, a shift has occurred in the focus of studies of the geographic distribution of genetic variation. Whereas landscape genetics studies primarily focus on testing the effects of landscape variables on gene flow and genetic population structure, landscape genomics studies focus on detecting candidate genes under selection that indicate possible local adaptation. Navigating the transition between landscape genomics and landscape genetics can be challenging. The number of molecular markers analyzed has shifted from what used to be a few dozen loci to thousands of loci and even full genomes. Although genome scale data can be separated into sets of neutral loci for analyses of gene flow and population structure and putative loci under selection for inference of local adaptation, there are inherent differences in the questions that are addressed in the two study frameworks. We discuss these differences and their implications for study design, marker choice and downstream analysis methods. Similar to the rapid proliferation of analysis methods in the early development of landscape genetics, new analytical methods for detection of selection in landscape genomics studies are burgeoning. We focus on genome scan methods for detection of selection, and in particular, outlier differentiation methods and genetic-environment association tests because they are the most widely used. Use of genome scan methods requires an understanding of the potential mismatches between the biology of a species and assumptions inherent in analytical methods used, which can lead to high false positive rates of detected loci under selection. Key to choosing appropriate genome scan methods is an understanding of the underlying demographic structure of study populations, and such data can be obtained using neutral loci from the generated genome-wide data or prior knowledge of a species' phylogeographic history. To this end, we summarize recent simulation studies that test the power and accuracy of genome scan methods under a variety of demographic scenarios and sampling designs. We conclude with a discussion of additional considerations for future method development, and a summary of methods that show promise for landscape genomics studies but are not yet widely used.

INTRODUCTION
Understanding the spatial distribution of adaptive genetic variation is at the very core of evolutionary biology and population genetics. Recent advances in next-generation sequencing make studies of the genomic basis of local adaptation now possible for virtually any organism. Simultaneously, spatial data for nearly every corner of the Earth are available due to dramatic increases in GIS and mapping technologies. These technological developments have led to the rapid proliferation of studies that integrate geographic and genomic data to test for spatial patterns of genes under selection, collectively termed "landscape genomics" (Joost et al., 2007;Lowry, 2010;Manel et al., 2010).
Landscape genomics stems from landscape genetics, an explicitly spatial suite of analysis methods that focus on testing the influence of landscape features on genetic population structure (Manel et al., 2003;Storfer et al., 2007;Manel and Holderegger, 2013). The transition from landscape genetics to landscape genomics has come with the shift from utilizing a dozen or so loci (often microsatellites) to thousands and even millions of loci (often single nucleotide polymorphisms-SNPs)and even complete transcriptomes or genomes-in studies of spatial genetic variation.
Is landscape genomics just landscape genetics with more loci? In the original article that coined the term "landscape genetics, " Manel et al. (2003) state that, "Dozens of markers are available for numerous taxa" and that "identification of loci under selection can help us understand the genetic basis of local adaptation. . . " (p. 190). However, except for candidate gene approaches, where a priori information about the function of specific genes is known, dozens of markers are generally insufficient for tests of selection; such tests commonly rely on orders of magnitude more loci to have appropriate statistical power to conduct outlier analyses Pritchard and Di Rienzo, 2010) or genotype-environment associations (i.e., GEAs, Rellstab et al., 2015). As a result, the literature commonly refers to landscape genomics studies as those that (have the power to) focus on describing spatial patterns of selection and adaptation, whereas landscape genetics studies primarily focus on the influence of landscape variables on gene flow (Rellstab et al., 2015;Haasl and Payseur, 2016).
Semantics aside, scientists are now awash with data, and analytical methods have lagged behind our ability to generate massive data sets. The shift from analyzing dozens to thousands to millions of markers (and even whole genomes) brings about new computational challenges. Whereas landscape genetics relies upon a rich history of spatial statistics dating back to the 1950s and 1960s, genome-wide selection analyses have primarily been developed in the last decade. New methods are rapidly being developed, and embarking on a landscape genomics study may seem like a daunting task for some researchers. Here, we aim to disentangle some of the complexity involved in conducting a landscape genomics study and associated downstream analyses, and we hope to offer some perspective for novice and experienced researcher alike. We focus primarily on marker-based studies of non-model organisms, as it is in these systems that landscape genomics studies are most rapidly expanding. Additionally, inference in non-model organisms is particularly challenging as they lack the genomic tools such as reference genomes and transcriptomes, which are typically available for model systems (Manel et al., 2010;Storfer, 2015). We emphasize that this piece is not meant to be an exhaustive review of the subject, as many substantial articles have already been published to this effect (e.g., Haasl and Payseur, 2016;Hoban et al., 2016;Rellstab et al., 2016). Rather, we provide a brief guide to navigate this new and rapidly changing field and in the following sections, we focus on: (1) study design; (2) data generation; (3) analysis methods and associated challenges; (4) methods at the interface of landscape genetics and landscape genomics; and, (5) future directions.

STUDY DESIGN
Early work in landscape genetics went through an exploratory phase, where sampling was geographically widespread and involved testing the effects of various landscape variables on gene flow and population genetic structure (Storfer et al., 2007. Similarly, early landscape genomics studies lacked specific hypotheses and were designed to take an unbiased approach to search for candidate loci across populations that differed in key environmental variables (e.g., altitude; Haasl and Payseur, 2016). Instead of using candidate gene or QTL approaches (Stinchcombe and Hoekstra, 2008), tests for selection were conducted across a suite of loci spread throughout the genome without a priori information about putative function. High false positive rates are perhaps the most significant problem with landscape genomics studies that rely on genome scans Whitlock, 2014, 2015;Rellstab et al., 2015;Haasl and Payseur, 2016), and this is further exacerbated without a priori hypotheses. Studies that lack specific hypotheses are prone to choose candidate loci with the strongest associations with environmental variables, with a reasonable chance of detecting spurious result(s). One way to identify false positives is that loci in close proximity do not show a signature of selection. Even if loci detected in such analyses are "true" positives, the function of the candidate loci remains unknown, particularly when lacking a reference genome and thus the ability to map a candidate locus (Pavlidis et al., 2012). Even when a candidate is in linkage disequilibrium with a gene of known function, downstream functional verification may be necessary. Thus, landscape genomics studies should aim to be hypothesisdriven, because inference is stronger when there is documented variation in phenotypes or other specific information that provides evidence of spatial variation in local adaptation among populations.
It is also important to note that landscape genomics studies can test for candidate genes underlying local adaptation, as well as the effects of landscape variables on gene flow. That is, the large number of loci generated for landscape genomics studies can be partitioned into sets of loci that are putatively neutral and those that are putatively under selection, with the former being used to test spatial patterns of gene flow and population structure. Note, however, that sampling designs for assessing population genetic structure and testing for loci under selection have important similarities and differences (Table 1).
For both landscape genetics and landscape genomics studies, choosing an appropriate spatial scale for a proposed study area is extremely important. In general, the extent of the study area and spacing of demes within that study area should match the spatial scale of dispersal and thereby the likely scale of environmentallymediated selection for the study species (Anderson et al., 2010;Richardson et al., 2014;Rellstab et al., 2015;Hoban et al., 2016). Additionally, the resolution of the environmental data should be appropriate for the study species (e.g., sampling at a 2.5 km scale would be inappropriate for a slug species; Anderson et al., 2010). Also, GIS layers chosen for each study should be those deemed to be those most reasonable based on the ecology of the study species and what is known regarding habitat use. However, researchers should be aware that many environmental layers available for analysis in a GIS tend to be multicollinear (e.g., various temperature measures, such as seasonality and maximum temperature). Without some reduction of the number of variables (e.g., via ordination such as PCA), significant relationships between detected between environmental variables and allele frequencies may be spurious and/ or correlated with the true variables. Alternatively, problems with multicollinearity can be avoided by selecting one environmental variable as a representative of each correlated set (e.g., Trumbo et al., 2013).
An overview of the use of GIS in landscape genomics studies is provided in Leempoel et al. (2017).
A key difference between landscape studies of gene flow and those designed to detect selection is regarding design of spatial sampling (Table 1). For example, in landscape genetics, when testing hypotheses about effects of a specific environmental variable such as precipitation on population genetic structure, a stratified random design is often preferred . In contrast, landscape genomics simulations have repeatedly emphasized that replicated sampling of environmental extremes hypothesized to drive selection (e.g., high and low altitude) results in higher power to detect candidate loci under selection than random sampling or transect designs (De Mita et al., 2013;Whitlock, 2014, 2015;Rellstab et al., 2015;Stucki et al., 2016; see also Table 2). Nonetheless, transect sampling can be appropriate when populations are expected to be maladapted to extremes, but locally adapted to intermediate conditions . Sampling transects can also be useful when sampling across a zone of introgression or when geographic clinal analyses are to be employed (see Section Clinal Analyses). Thus, an important distinction to note between landscape genetics and landscape genomics studies is that the former involves study designs that tend to focus on sampling across environmental variation that should influence gene flow, whereas the latter should most often be designed Outlier differentiation methods; Genotype-environment associations, Ordination, Assignment tests, Genomic cline analysis*, GDM*, EEMS* Note that, when conducting a landscape genomics study, that when loci under selection are removed and putatively neutral loci remain, that landscape genetics questions and analyses can then be conducted. Nonetheless, sampling designs generally differ between landscape genetics and landscape genomics studies, so some landscape genetics questions may not be addressable in studies with landscape genetics goals. Bolded sampling designs indicate preferred designs for that particular question. Not all analysis methods under each study type are listed, just those that are most commonly used or best suited to address the goals of the study. Note also that assignment test methods generally differ between landscape genetics and landscape genomics studies. Italicized words under analysis type indicate those commonly used in both landscape genetics studies of gene flow and landscape genomics studies of loci involved in adaptation. dbRDA, distance-based redundancy analyses; sPCA, spatial principal components analysis; MDS, multidimensional scaling; MLPE, maximum likelihood of population effects (Clarke et al., 2002); LFMM, latent factor mixed models; sGLMM, spatial generalized linear mixed models; EEMS, Estimated Effective Migration Surface (Petkova et al., 2016). Software names include: Geneland (Guillot et al., 2005), Structure (Pritchard et al., 2000), Tess (Durand et al., 2009) to sample replicated pairs of populations that experience the same environmental extremes. Replication also helps reduce the chance that candidate loci under selection are false positives; loci detected repeatedly across different environments are less likely to result from confounding effects of population structure or environmental covariances (Rellstab et al., 2015). With limited resources, researchers generally face a tradeoff between the total number of samples and the total number of localities that can be sampled in genetics studies of natural populations. Landscape genetics study designs often focus on maximizing the number of individuals per location to obtain accurate allele frequency estimates Manel and Holderegger, 2013). Most landscape genetics analyses are genetic distance-based, and inaccurate estimates of allele frequencies can bias gene flow estimates (Storfer et al., 2007. While replication of sites or transects is favored for reasons above in landscape genomics studies, the balance between sample size and number of sites depends on downstream analysis type. Power is generally limited by the total number of samples collected in landscape genomics studies . Indeed, it is important to sample a sufficient number (e.g., > 10) of individuals per locality to generate accurate allele frequency estimates for analyses that rely on estimates of genetic differentiation among populations (i.e., differentiation outlier analyses below). However, optimizing the number of population pairs sampled (with smaller sample sizes per location) can be robust for detecting selection when sampling locations represent a range of environmental variable values across the study area (De Mita et al., 2013; Table 2).

DATA GENERATION
Initially, landscape genomics studies expanded from microsatellites commonly employed in landscape genetics studies to a few hundred AFLPs (amplified fragment-length polymorphisms; Joost et al., 2007). Currently, landscape genomics studies typically rely on genome-wide SNP marker sets generated using short-read next generation sequencing technologies (e.g., Illumina). Perhaps the most widely used of such reduced-representation approaches in the last few years is RAD-seq (restriction-associated digest DNA sequencing; Andrews et al., 2016;Lowry et al., 2017). RAD-seq is particularly appealing because it does not rely on availability of a reference genome. In short, whole genomic DNA is cut into fragments using a restriction enzyme, sequencing bar codes are ligated to restriction sites, individuals are bar-coded and fragments are sequenced using next-generation technology (Andrews et al., 2016). Homologous fragments among individuals are aligned (e.g., using Stacks Catchen et al., 2013 or other software), and thousands to millions of SNPs are identified. RAD-seq has been extremely beneficial for studies of population genetic structure, as well as pedigree and other analyses (Andrews et al., 2016;Catchen et al., 2017). Therefore, RAD-seq can be a powerful approach for landscape genetics studies. As with other genotyping-by-sequencing methods, RAD-seq, while beneficial for genotyping large numbers of individuals, suffers from marker attrition. That is, the more individuals sequenced, the fewer loci become available for robust analyses due to genotyping errors due low coverage or missing data. Additionally, a shortcoming of RAD-seq for landscape genomics studies is that generally only a small fraction of a genome is sampled, and thus loci involved in adaptation are often missed (Lowry et al., 2017). Further, without a reference genome, identified SNPs are anonymous, and downstream work is necessary to determine their function (Lowry et al., 2017).
As a potential solution, transcriptome sequencing and exome capture are reduced representation approaches that focus on genic (i.e., coding) regions. Genes will contain much of the functional genetic variation that underlies adaptation, and such regions are also in linkage with promoter regions also under selection (Hoekstra and Coyne, 2007;Stern and Orgogozo, 2008). RNA-seq is an approach to sequence total RNA or the mRNA transcriptome, which can be used to evaluate gene expression levels (in different environments) and, when multiple transcriptomes are sequenced, SNPs can be identified. A series of capture probes can then be designed to sequence the flanking region around identified SNPs in cDNA. Assembled transcriptomes, can then be used to annotate functional information for candidate SNPs since they are all found in coding DNA. Further, when SNP codon positions are identified, traditional sequence-based population genetic tests for selection can be applied (e.g., MK test; McDonald and Kreitman, 1991 or dN/dS ratios). Transcriptome sequencing, however, will only capture a subset of all coding genes, as gene expression is tissuespecific (Bishop et al., 1974). Exome capture sequencing will increase the number of coding loci (Jones and Good, 2016).
Another method used for genome-wide marker generation in non-model species is Pool-seq (reviewed Schlötterer et al., 2014), whereby a large number of individuals (dozens to hundreds) are pooled and sequenced together. Advantages include reduced cost, and genome-wide data generation that facilitates SNP identification and allele frequency generation for population genetic analyses. Disadvantages include lack of ability to identify individual samples, difficulties identifying rare variants, and potential alignment issues owing to non-homologous sequences (i.e., paralogs), and lower confidence in SNP assignment than other methods (Schlötterer et al., 2014). Software such as PoPoolation (Kofler et al., 2011) can help account for some of the bias introduced by pooling and sequencing errors. Nonetheless, pool-seq works much better when a reference genome is available and short-read sequences can be aligned and mapped to reduce alignment errors among pools. Even with a reference genome, structural variation (e.g., inversions, indels) between pooled resequenced samples and the reference can generate falsely identified SNPs (Tiffin and Ross-Ibarra, 2014).

ANALYSIS CONSIDERATIONS
Similar to landscape genetic studies, there is a wide array of analysis methods for landscape genomics analyses and new methods are continuously being developed (Hoban et al., 2016).
The key difference between the two analytical frameworks is Frontiers in Genetics | www.frontiersin.org Summarized are questions, sampling methods, analysis methods and conclusions as to which methods lead to low false positive rates and high power to detect loci under selection.
Frontiers in Genetics | www.frontiersin.org that landscape genetics studies rely on use of putatively neutral markers to generate estimates of genetic population structure, whereas tests of selection in landscape genomic studies generally require the need to control for population structure (see Table 1).
As above, note that genome-wide marker sets generated for landscape genomics tests of selection can also be parsed into neutral data and landscape genetics analyses can be employed (see Storfer et al., 2007Storfer et al., , 2010Guillot et al., 2009;Shirk et al., 2017). Landscape genomics studies employ tests for loci under selection using genome scans, candidate gene approaches, quantitative trait locus mapping and genome-wide association studies (see Stinchcombe and Hoekstra, 2008;Storfer, 2015). However, genome scans are the most widely used, as the latter analysis types tend to be used for model systems. It is important to note that numerous excellent reviews (e.g., Rellstab et al., 2015;Haasl and Payseur, 2016;Hoban et al., 2016) discuss in detail the benefits and limitations of the various genome scan methodologies and associated software. As such, we summarize the main considerations here. Genome scans generally use two approaches to detect loci under selection: (1) differentiation outlier methods (which were previously called F ST -outlier tests, but now include other methods of genetic differentiation among populations; Hoban et al., 2016); and, (2) genetic-environment association (GEA) tests (Schoville et al., 2012;Pardo-Diaz et al., 2015;Rellstab et al., 2015;Hoban et al., 2016). Differentiation outlier methods rely on the demonstration that, at migration-drift equilibrium under a neutral island model with spatially uniform migration and gene flow, population differentiation of allele frequencies (e.g., F ST ) across a large number of loci can be used to infer the process of selection acting on a subset of loci (Lewontin and Krakauer, 1973). Statistical outlier loci with significantly greater F ST (or other genetic distance) values than the distribution of genomewide F ST values are presumed to be under diversifying or local selection or linked to those under selection (Black et al., 2001;Luikart et al., 2003). Similarly, loci with significantly lower F ST values are inferred to be under stabilizing or purifying selection (Black et al., 2001;Luikart et al., 2003). Thus, unlike landscape genetics studies which generate genetic distance estimates among a small number of loci to elucidate effects of landscape variables on gene flow, landscape genomics studies rely on a very large number of loci to generate a frequency distribution of genetic distance values as a null against which to test for outliers under selection.
Early methods to conduct such outlier tests include FDIST (Beaumont and Nichols, 1996; implemented in LOSISTAN) to identify strong differences from the null distribution of F ST values across loci. Later, the widely used BayeScan (Foll and Gaggiotti, 2008) was developed, which uses a Bayesian method to estimate the relative probability that each locus is under selection. PCAdapt is a recently developed popular method that uses a principal components analysis framework to detect candidate loci under local adaptation (Duforet-Frebourg et al., 2014). Methods that use genetic distance measures other than F ST include FLK (Bonhomme et al., 2010), which uses a modified version of the Lewontin and Krakauer (1973) test for selection by comparing allele frequencies of different populations in a neighbor-joining tree constructed using a matrix of Reynold's genetic distance (Reynolds et al., 1983), and X T X, which employs a Bayesian method to test individual SNPs against a null model generated by the covariance in allele frequencies between populations from the entire set of SNPs (utilized in Bayenv2; Coop et al., 2010;Günther and Coop, 2013). Summaries of differentiation outlier methods can be found in Hoban et al. (2016;Appendix 1). Notably, differentiation outlier methods are aspatial in nature.
GEAs (also referred to as EAAs or environmental association analyses; Rellstab et al., 2015) are spatial because they are designed to test for significant correlations between allele frequencies at particular loci with variation in environmental variable(s) (Joost et al., 2007;Hancock et al., 2011;Rellstab et al., 2015). Thus, unlike differentiation outlier approaches, GEAs require availability of environmental data from sources such as WorldClim data (http://www.worldclim.org, Hijmans et al., 2005). Widely used methods include Bayenv2, which tests for GEAs in addition to differentiation outliers, and latent factor mixed models (LFMM; Frichot et al., 2013). Bayenv2, tests for large allele frequency differences across environmental gradients by comparing observed allele frequency differences to transformed normal distribution of underlying population frequencies. Latent factor mixed models (LFMM; Frichot et al., 2013), include population structure as latent (or hidden) variables to limit false positive signals. Spatial generalized linear mixed models (SGLMMs; Guillot et al., 2014) are an extension to LFMMs and have proven to be computationally more efficient. Ordination approaches, such as redundancy analysis, can also be used in GEAs (Forester et al., 2015); ordination is also widely used in landscape genetics studies . Another more recently developed GEA method is Samβada (Stucki et al., 2016), which is a multivariate analysis framework that accounts for underlying population structure with estimates of spatial autocorrelation in the data. To search for loci under selection, Samβada uses linear regressions to model the probability of observing a particular allele given the value of environmental variables at the location it was sampled for each locus independently (Stucki et al., 2016). A summary of GEAs and their assumptions can be found in Rellstab et al. (2015 ;  Table 1).

Analysis Concerns
Fundamentally genome scan methods operate on the assumption that loci under selection can be differentiated from a null distribution of allele frequencies generated by neutral processes. Determining how much genetic differentiation can be expected in populations in the absence of selection, however, remains a great challenge (Lotterhos and Whitlock, 2014;Hoban et al., 2016). Thus, the primary concern with employing genome scan analyses is differentiating false positive signals from loci that are actually under selection.
Underlying population demographic structure, when not properly accounted for, can be a principal source of false positives. There are several demographic scenarios that can generate neutral allele frequency differentiation among populations that can falsely be interpreted as signals of selection Rellstab et al., 2015;Haasl and Payseur, 2016). A straightforward example is illustrated by the case of allele surfing, whereby serial population bottlenecks that occur during founder effects of small populations migrating to new areas can result in fixed allelic differences among populations that are solely due to genetic drift (Excoffier et al., 2009;Waters et al., 2013). Similarly, recent population range expansions from refugia can generate correlations between allele frequencies and environmental variables that are not due to selection. In general, landscape genomics studies are challenging in small, patchy populations that are prone to genetic drift, which can result in the appearance of spatially distributed loci under selection. False signals of selection can also be generated by locus-specific hybridization or introgression from related taxa (Fraïsse et al., 2016;Hoban et al., 2016). Nonetheless, in cases where selection gradients follow the same spatial pattern as background genetic population structure, candidate loci under selection can be missed due to false negative signals.
In general, demographic structure can influence the null distribution of F ST or other genetic differentiation measures and thereby bias significance testing (Lowry, 2010;Whitlock and Lotterhos, 2015). Each genome scan method utilizes a different way to account for underlying population demography. For example, FDIST assumes populations follow an island model (Beaumont and Nichols, 1996) to generate null F ST distribution. The recently developed OutFLANK , however, does not invoke a specific demographic model. Rather, OutFLANK infers the distribution of F ST for loci unlikely to be strongly affected by spatially diversifying selection . Specifically, OutFLANK uses a modified Lewinton-Krakauer method to infer a null F ST distribution, which approximates a χ 2 distribution with adjusted degrees of freedom. Then, differentiation outliers are identified as those that fall outside this trimmed, putatively null F ST distribution.
Approaches that use covariance matrices or linear models to account for population structure are also flexible because they have no explicit underlying population demographic model. For example, Bayenv2 is a GEA method that controls for genetic population structure in by generating a variancecovariance matrix of relatedness among samples; candidate loci are determined as those for which an environmental variable explains significantly more variation than the variancecovariance matrix of all other loci (Günther and Coop, 2013). Linear model approaches, such as LFMMs and SGLMMs, can limit false positives in both GEAs and outlier tests by including population structure as latent variables (Frichot et al., 2013;Lotterhos and Whitlock, 2015). Samβada uses estimates of underlying spatial autocorrelation in genetic data as a way to control for underlying population structure (Stucki et al., 2016).
A number of informative simulation studies that explore the power of the different methods under different demographic or other scenarios have recently been published (De Mita et al., 2013;Frichot et al., 2013;Jones et al., 2013;de Villemereuil et al., 2014;Whitlock, 2014, 2015;Forester et al., 2015; See Table 2 for a summary of the study conditions and their findings). The relative power of GEAs and differentiation outlier tests is dependent on the underlying demographic model. GEAs have higher power under an island model, whereas outlier tests have higher power under an isolation-by-distance model . Within GEAs, the degree of patchiness in the landscape affects the power and false positive rates (Forester et al., 2015). With limited dispersal and strong isolation-by-distance, univariate GEAs had high false positive rates (FPRs; up to 55%) and constrained ordination procedures (e.g., redundancy analyses, or RDA) performed much better with lower FPRs (0-2%; Forester et al., 2015). Within outlier differentiation methods, Bayenv2 and FLK outperformed FDIST and Bayescan for systems experiencing IBD and recent range expansions (Lotterhos and Whitlock, 2014). Of all GEAs and outlier detection methods, LFMMs were generally found to have relatively low false positive rates (Type I error rates) than other methods (Jones et al., 2013;Joost et al., 2013).
Even after accounting for the underlying population structure, however, there are other important considerations that can affect the power of genome scan studies and their interpretation. To date, no methods have been developed to account explicitly for background selection (Hoban et al., 2016), which can result in population diversification due to purifying and not positive selection (Charlesworth et al., 1993). Background selection can thus cause errors in estimating the null distribution and thereby reduce power of genome scans (Tiffin and Ross-Ibarra, 2014;Haasl and Payseur, 2016). Signatures of local adaptation can also be incorrectly inferred as a result of spatially uniform positive selection. That is, across landscapes with limited gene flow, multiple beneficial mutations may arise to reach an optimal phenotype, resulting in a patchwork of allele frequencies. This can result in detectable genetic differentiation across the patches that produces false signals of selection by local environment (Hoban et al., 2016).
It is also important to note that genome scan analyses are biased to detect large effect loci, because power to detect small effect loci is generally low . Because most phenotypic traits are likely to be polygenic, and thus governed by many loci of small effect (Rockman, 2012), genome scan methods are prone to miss most loci involved in local adaptation (Stephan, 2015). Further, the polygenic nature of phenotypic traits means candidate loci explain a small proportion of phenotypic variation, which has been termed the "missing heritability problem" (Hindorff et al., 2009;Visscher et al., 2010;Yang et al., 2010Yang et al., , 2012. Recently, multilocus approaches have been developed that quantify the strength of selection acting on correlated loci using Bayesian sparse linear mixed models (Gompert et al., 2017). However, these approaches necessitate large sample sizes and time-series sampling, thereby limiting their widespread applicability. In addition, for studies that employ anonymous SNP markers when no reference genome exists, such as RAD-seq, candidate genes are assumed to be in linkage disequilibrium (LD) with loci under selection and are most often not under selection themselves (Lowry et al., 2017). With a reference genome, estimates of LD decay can be used to determine the size of the window to search for possible genes linked to a candidate SNP detected in a genome scan when the SNP is not in a gene itself. However, we do not know the extent of LD for most species, and the size of LD blocks is not constant throughout the genome (Tiffin and Ross-Ibarra, 2014;Lowry et al., 2017). These factors can make mapping and annotating candidate markers prone to error.

Combinatorics and Other Multivariate Approaches
An important consideration in landscape genomics studies is how to integrate data analyses across multiple genome scan methods. One fairly standard approach is to construct Venn diagrams and use combinatorics as a method of validation for candidate loci. That is, the larger the number of genome scan methods that detect a particular candidate locus under selection, the more confident researchers tend to be that the candidate is truly under selection. However, genome scan methods each have different assumptions and different power to detect loci under selection, depending on population demography, sampling design and nature of the selective sweep . Thus, reliance on concordance of multiple univariate methods to prioritize loci for further research is prone to miss loci under weak selection .
Recent proposed solutions have included multivariate methods that combine P-values and control for false discovery rates (FDR; Benjamini and Hochberg, 1995). For example, de-correlated composite of multiple signals (DCMS) controls for genome-wide correlations among statistics by weighting each locus depending how correlated a particular statistic that detected the locus is to other statistics (Ma et al., 2015). Thus, the less a test statistic is correlated to another statistic(s), the higher the locus is weighted. François et al. (2016) built on earlier methods to control for FDR (e.g., Benjamini and Hochberg, 1995) using a "genomic inflation factor" to adjust the distribution of p-values. In general, composite methods tend to perform better than univariate methods, but their performance has only been evaluated in a narrow set of circumstances .
Even newer methods include analyses to filter, visualize and integrate multiple univariate analyses in multivariate space Verity et al., 2017). For example, MINOTAUR (Multivariate vIsualizatioN and OuTlier Analysis Using R) is a program that uses one of four different distance measures (Mahalanobis distance, harmonic mean distance, nearest neighbor distance and kernel density deviance) to test the significance of loci ). An important future direction is to continue to evaluate the variety of methods for evaluating and prioritizing candidate loci for future research. As we learn more about the genomic architecture of different species, we can continue to test the performance of existing methods, or develop new methods as appropriate.

Analysis Considerations-Summary
In general, researchers should avoid the temptation to analyze their data with as many genome scan methods as possible.
Instead, several factors that should be considered when choosing genome scan method(s) to be employed. First, if attainable, knowledge of underlying demographic structure can be used to choose the most powerful methods that are least prone to Type I errors for that specific demographic history. For example, phylogeographic analyses can be used to assess whether there have been recent geographic range expansions from glacial refugia. To parameterize the number of latent factors (e.g., in LFMM or SGLMM), the number of genetic clusters (K) could be determined using a Bayesian clustering algorithm such as FastSTRUCTURE (Raj et al., 2014) or ADMIXTURE (Alexander et al., 2009). Note that incorrect assumptions about underlying demographic structure can increase both Type I and Type II error (Pérez-Figueroa et al., 2010;Jones et al., 2013;Lotterhos and Whitlock, 2014), and in such cases, modelfree approaches may be preferred. Second, given the numerous additional concerns for which researchers have little ability to estimate (e.g., variation in genome-wide LD) or control for (e.g., the polygenic nature of most phenotypic traits), confidence in candidate loci as real targets of selection comes from their repeated detection across replicated transects or paired sampling locations. Similarly, candidate loci detected by multiple analysis methods also decreases the likelihood that they are false positives. Third, as stated above, inference of candidate loci is improved when selective agent(s) are known before embarking on a landscape genomics study. Candidate genes identified in genic pathways that influence particular phenotypes known to be under selection are less likely to be false positives than randomly detected loci or those without known function.

METHODS AT THE INTERFACE OF LANDSCAPE GENETICS AND LANDSCAPE GENOMICS Generalized Dissimilarity Modeling (GDM)
Originally used to model species community turnover (Ferrier et al., 2007), GDMs have recently been adopted for use in landscape genetics studies. GDMs involve fitting I-splines that are monotonic, nonlinear functions that, when rescaled between 0 and 1, represent importance of environmental variables in explaining turnover of allele frequencies (Fitzpatrick and Keller, 2015). GDMs have been used to assess effects of at site environmental differences on gene flow (also called "isolation by environment"; Wang and Bradburd, 2014). I-splines can be nonlinear, providing an advantage over linear approaches because they may be able to identify threshold values (i.e., the point along the environmental axis where the slope of the spline is greatest) for landscape variables. Similarly, GDMs can be applied to landscape genomics studies by fitting I-splines to the relationships of ecological variables on allele frequencies at putatively adaptive loci. Related to GDMs, which employ distance-based measures are gradient forests, an extension of random forests, which both employ machine-learning algorithms for model optimization (Breiman, 2001). Similar to GDM, gradient forests fit nonlinear monotonic functions to characterize allele-frequency turnover across environmental gradients for each locus independently (see Fitzpatrick and Keller, 2015). As such, both approaches can be used to identify a loci with high degree of allelic turnover associated with specific environmental variables, and thus yield candidate loci under selection.

Estimated Effective Migration Rate
Another recently developed method that can be applied to both landscape genetics and landscape genomics studies is the Estimated Effective Migration Surface (EEMS: Petkova et al., 2016). This method differs from other approaches that identify underlying population demographic structure (e.g., clustering and PCA-based approaches), because genetic differentiation is modeled as a function of estimated migration rates. EEMS uses a stepping stone model (Kimura and Weiss, 1964) that allows for migrations of variable rates to occur among a set of demes. This process is modeled by overlaying a dense regular grid over the study area and calculating an approximation of the expected genetic dissimilarity through the use of resistance distance, similar to "isolation-by-resistance" (McRae, 2006). Consequently, areas in which genetic dissimilarity decays more slowly will be assigned a greater value of Effective Migration Rate (EMR), than those for which genetic dissimilarity decays more rapidly.
EEMS offers two potential applications to landscape genomics studies. First, it can allow researchers to detect underlying demographic population structure, which can be used to help reduce false positive rates in genome scan methods. Second, EEMS analyses could be run separately on data sets containing only putatively neutral or putatively adaptive loci, and can then be used to visualize geographic features that impede gene-flow of neutral or adaptive loci, respectively.

Clinal Analyses
Clines have a rich history in population genetics and bridge both at-site and between-site analyses used in landscape genetics and genomics. To date, most clinal analyses on genome-scale data have focused on the study of hybrid zones and the detection of differential introgression (Gompert and Buerkle, 2010. While originally developed for use in identifying loci involved in adaptive divergence and reproductive isolation among hybridizing lineages, genomic cline models could be applied to identify candidate loci for population pairs for which a genome-wide admixture gradient (e.g., via ADMIXTURE or another assignment-based program) has been identified. Loci for which genomic clines possess outliers in one or both of these cline parameters may be subject to selective forces. Outlier loci with alleles introgressing most slowly can be interpreted as those involved in differential adaptation among populations, whereas loci introgressing most rapidly are likely to be uniformly advantageous.
Geographic cline models can explicitly measure the strength of selection on a locus, given the shape of a cline (Endler, 1977;Slatkin, 1987). Geographic cline analyses involve fitting a sigmoidal tanh cline model to allele frequencies and quantitative data such as environmental data or a measure of geographic distance (Figure 1; Barton, 1986, 1991). Then, cline center, width and slope are estimated along a geographic transect (requiring transect sampling). GEAs are essentially clinal analyses but focus only on the slope of the cline between sampling locations. However, geographic cline analyses analyze the shape of the cline; selection tends to steepen the cline, gene flow widens and reduces the steepness of the cline, and genetic drift narrows the cline (Figure 1; Endler, 1977;Nagylaki, 1978). Researchers can then compare the shapes of observed allele frequency clines in putatively adaptive loci to the shape of clines for neutral loci, as well as those predicted by models of pure migration or drift (Nagylaki, 1978). Unfortunately, current implementations FIGURE 1 | An illustration of clines. X-axes correspond to position along geographic transects (ecological gradient) or hybrid indexes (genomic gradient) in the case of genomic cline analyses. (A) Illustration of the three parameters typically estimated in the use of geographic of genomic cline analysis. Cline slope is the estimate of the rate of allele frequency turnover at the steepest point in the cline. In genomic cline analysis this corresponds to the rate of introgression. Cline center corresponds to the point along the geographic transect or hybrid index at which allele frequency turnover is greatest. Cline width corresponds to the region along the gradient at which it's influence on allele frequency is greatest. (B) Three examples of clines. (i) A transect along which no selection appears to be acting, or the effects of gene flow are such that changes in allele frequency are purely a function of distance. In the case of genomic cline analyses, the loci under consideration appears to be favored equally in both parental taxa. (ii) A modest cline in which the allele favored by selection changes along the gradient. Given its shallower slope, selection may either be weaker, gene flow stronger (in the case of geographic transects) or the ecotone separating ends of the transect greater. (iii) A steep cline, often called a step cline. In the case of geographic clines, these are formed either by strong selection acting in favor of one allele along a sudden ecotone, or extremely limited gene flow along said ecotone. In the case of genomic clines, this may be due to heterozygote disadvantage, as in the case of reinforcement. of geographic cline models (e.g., Analyse: Barton and Baird, 1995;hzar: Derryberry et al., 2014) are computationally burdensome, thus limiting cline fitting to datasets with small numbers of loci. Therefore, geographic cline analysis is currently best suited for use with a reduced set of candidate loci as identified by genome scans.

FUTURE DIRECTIONS
In the future, landscape genomics should integrate analyses on two scales-the landscape of the genome, and the ecological landscape. Specifically, the landscape of the genome refers to overall genomic architecture, such as the arrangement of loci on chromosomes, placement of inversions, deletions and copy number variants. All of these, ultimately, can affect gene expression, which is further modified by the environmental context in which an individual exists. However, the current state of landscape genomics studies is primarily to generate a list of candidate loci under selection, and, when possible annotate genes in LD with identified SNPs or other genetic variants. Nonetheless, scientists are increasingly aware that the genotype-phenotype relationship is influenced by far more of the genome than just genic sequences. For example, copy number variation and not sequence variation that determines how much human amylase, responsible for starch digestion, is expressed in saliva (Perry et al., 2007). Selection has acted on copy number variation in the amylase gene (AMY1) in the human populations; those with high starch diets have higher numbers of copies than populations with diets lower in starch (Perry et al., 2007). Similarly, camels have the highest number of copies known (11) of the CYP2J gene (related to salt homeostasis) likely due to selection for high salt tolerance necessary in desert environments (Wang et al., 2012). Transposable elements, which comprise over half the genome of many eukaryotes, were once thought of as parasitic or "junk" DNA (Federoff, 2012). However, evidence suggests that transposable elements are maintained in eukaryotic genomes due to their heritable role in epigenetic mechanisms, such as gene silencing (Federoff, 2012). DNA methylation patterns also influence gene expression and can also be heritable (Anway et al., 2005;Skinner et al., 2012). Promoters and other regulatory regions are also key determinants of gene expression levels and consequently phenotypes. Further, genes are expressed differently in different ecological environments, and selection varies spatially across the ecological landscape. In summary, genomic architecture plays a significant role in the genotypephenotype relationship, as evidenced by the fact that "large effect SNPs" tend to explain a small fraction of phenotypic variation in natural populations (Hindorff et al., 2009;Rockman, 2012).
Given that technological advances continue to make whole genome sequencing more and more feasible in terms of cost and computational speed for genome assembly, a key challenge for the future of landscape genomics will be the development of methods that integrate multiple data types. Difficulties will include: (1) accounting for the effects of coding and non-coding regions of genomes and overall genomic architecture, combined with protein expression levels, on phenotypic variation; (2) coding for genomic features such as copy number, chromosome inversions or transposable element composition or location in our population genetic models (i.e., Can they be considered in the same way as alleles?); (3) constructing hierarchical models to integrate sources of error from different data types. Then, the challenge is compounded further with the necessity to integrate these complex genomic models with multiple types of spatial environmental data and habitat models in ways that optimize sampling while avoiding potential biases. Mapping the genotype-phenotype relationship has been a key challenge for evolutionary biology for over a century, and landscape genomics will provide the analytical framework to do so across spatially variable ecological environments. A long road may lie ahead, but it is certainly an exciting time for landscape genomics to unravel the complexity of the genomic architecture that underlies local adaptation.

CONCLUSIONS
Landscape genomics has emerged as a prominent framework for studying the genomic basis of local adaptation. Using large genomic data sets, researchers scan the genome for loci that exhibit signatures of selection across heterogeneous environments (Haasl and Payseur, 2016). These efforts have been highly successful, for example, in identifying genes underlying hypoxia adaptation in high-elevation human populations (Beall, 2007a,b;Simonson et al., 2010), environmental responses in Oak populations along climatic gradients (Sork et al., 2016), and differences in growth response amongst Salmon populations in response to geological conditions (Vincent et al., 2013). Studies of biotic factors, have also successfully in identified local adaptation to life history traits (Sun et al., 2015), community composition (Harrison et al., 2017), and disease prevalence (Leo et al., 2016;Mackinnon et al., 2016;Wenzel et al., 2016). Landscape genomics has already dramatically helped to further our understanding of the genomic basis of adaptation (Funk et al., 2012;Shryock et al., 2015). Here, we suggest the field can advance with a careful consideration of explicit hypotheses that, in turn, guide study design, and employment analysis methods that help control confounding factors such as underlying demographic structure. Future landscape genomic research will better integrate genomic architecture in assessments of candidate loci under selection.

AUTHOR CONTRIBUTIONS
AS conceived of, and wrote most of the paper. AP and AF contributed to the writing, as well as gathered information for, and assembled Table 2.

ACKNOWLEDGMENTS
This work was funded by NSF grant DEB-1316549 to AS. Additionally, we thank Mark Margres, Lauren Ricci, Matthew Lawrence, and Elisa Lopez-Contreras for insightful comments that helped improve the quality of the manuscript.