%A Li,Shengxi %A Zeng,Zhipeng %A Harris,Michael A. %A Sánchez,Lizeth J. %A Cong,Hongbo %D 2019 %J Frontiers in Materials %C %F %G English %K Mild Steel,EIS (Electrochemical impedance spectroscopy),CO2 corrosion,Chloride effect,temperature effect,Corrosion kinetics,corrosion scale %Q %R 10.3389/fmats.2019.00010 %W %L %M %P %7 %8 2019-February-13 %9 Original Research %# %! CO2 Corrosion of Carbon Steel %* %< %T CO2 Corrosion of Low Carbon Steel Under the Joint Effects of Time-Temperature-Salt Concentration %U https://www.frontiersin.org/articles/10.3389/fmats.2019.00010 %V 6 %0 JOURNAL ARTICLE %@ 2296-8016 %X The time-dependent effects of temperature and salt (NaCl) concentration on the corrosion behavior of carbon steel in CO2-saturated environments were explored using various electrochemical techniques coupled with XRD, Raman spectroscopy, and SEM/FIB examinations. At constant salt level, corrosion rate increases, and stabilizes when the temperature is below 60°C. When temperature is higher than 60°C, corrosion rate firstly increases, reaches an apex, and then starts decreasing continuously. The magnitude of the decrease is inversely proportionally to the salt concentration, which is attributed to the microstructure of dual-layer FeCO3 scale. Polarization experiments indicate the anodic process is more affected by salt concentration than temperature while the opposite is true for the cathodic kinetics. Although chloride is not detected in the corrosion scale, it is regarded to have significant influence on the nucleation and growth of FeCO3 and therefore the properties (e.g., thickness and compactness) of the corrosion scales. Lastly, a mechanism is proposed for the evolution of corrosion scales on carbon steel in CO2 saturated environment as a function of temperature and salt concentration.