%A Nevoralová,Martina %A Koutný,Marek %A Ujčić,Aleksandra %A Starý,Zdeněk %A Šerá,Jana %A Vlková,Helena %A Šlouf,Miroslav %A Fortelný,Ivan %A Kruliš,Zdeněk %D 2020 %J Frontiers in Materials %C %F %G English %K Morphology -,Soil,biodegradation rate,Thermoplastic starch,Poly (ε -caprolactone) %Q %R 10.3389/fmats.2020.00141 %W %L %M %P %7 %8 2020-June-05 %9 Original Research %# %! Structure effect on PCL/TPS-biodegradation %* %< %T Structure Characterization and Biodegradation Rate of Poly(ε-caprolactone)/Starch Blends %U https://www.frontiersin.org/articles/10.3389/fmats.2020.00141 %V 7 %0 JOURNAL ARTICLE %@ 2296-8016 %X The present paper focuses on the effects of blending poly (ε-caprolactone) (PCL) with thermoplastic starch (TPS) on the final biodegradation rate of PCL/TPS blends, emphasizing the type of environment in which biodegradation takes place. The blends were prepared by melt-mixing the components before a two-step processing procedure, which strongly affects the degree of plasticization and therefore the final material morphology, as was detailed in the previous work, was used for the thermoplastic starch. The concentration row of pure PCL over PCL/TPS blends to pure TPS was analyzed for biodegradation in two different environments (compost and soil), as well as from a morphological, thermomechanical, rheological, and mechanical point of view. The morphology of all the samples was studied before and after biodegradation. The biodegradation rate of the materials was expressed as the percentage of carbon mineralization, and significant changes, especially after exposure in soil, were recorded. The crystallinity of the measured samples indicated that the addition of thermoplastic starch has a negligible effect on PCL-crystallization. The blend with 70% of TPS and a co-continuous morphology demonstrated very fast biodegradation, with the initial rate almost identical to pure TPS in both environments while the 30% TPS blend exhibited particle morphology of the starch phase in the PCL matrix, which probably resulted in a dominant effect of the matrix on the biodegradation course. Moreover, some molecular interaction between PCL and TPS, as well as differences in flow and mechanical behavior of the blends, was determined.