Development of Loop-Mediated Isothermal Amplification Assay for Detection of Clinically Significant Members of Acinetobacter calcoaceticus–baumannii Complex and Associated Carbapenem Resistance

Background: Acinetobacter calcoaceticus–baumannii (ACB) complex has emerged as an important nosocomial pathogen and is associated with life-threatening infections, especially among ICU patients, including neonates. Carbapenem resistance in Acinetobacter baumannii has emerged globally and is commonly mediated by bla OXA-23. Clinically significant infections with carbapenem-resistant Acinetobacter baumannii (CRAB) are a major concern since therapeutic options are limited and associated mortality is high. Early diagnosis of both the pathogen and resistance is important to initiate the optimal therapy and prevent selection of resistance. In the current study, a loop-mediated isothermal amplification (LAMP) assay was developed for rapid detection of the ACB complex and carbapenem resistance mediated by bla OXA-23. Methodology: Universal LAMP primers were designed for the detection of significant members of the ACB complex and carbapenem resistance targeting the ITS 16S–23S rRNA and bla OXA-23 gene respectively. The optimal conditions for the LAMP assay were standardized for each primer set using standard ATCC strains. The sensitivity of the LAMP assay was assessed based on the limit of detection (LOD) using different DNA concentrations and colony counts. The specificity of LAMP was determined using the non-ACB complex and non-Acinetobacter species. The results of the LAMP assay were compared with those of polymerase chain reaction (PCR). Results: The optimal temperature for the LAMP assay was 65°C, and the detection time varied with various primers designed. Using the ITS Ab1 primer, LODs of LAMP and PCR assays were 100 pg/μl and 1 ng/μl of DNA concentration and 104 cfu/ml and 108 cfu/ml of colony count, respectively. The LAMP assay was 10- and 104-fold more sensitive than PCR using DNA concentration and colony count, respectively. The LAMP assay was found to be specific for clinically important ACB complex species. Significance of the study: The LAMP assay can be applied for early detection of significant species of the ACB complex from clinical samples and their carbapenem-resistant variants. Depending on the emerging pathogen and locally prevalent resistance genes, the LAMP assay can be modified for detection of colonization or infection by various resistant bugs.

Within the ACB complex, A. baumannii has emerged as an important pathogen associated with a variety of nosocomial infections, including bacteremia, pneumonia, meningitis, and urinary tract and surgical site infections (Manchanda et al., 2010;Chen et al., 2014). A. baumannii has rapidly acquired resistance to multiple antibiotics, and multidrug resistance (MDR) is common. Recently, studies have reported that the infection rates of A. pittii and A. nosocomialis have been gradually increasing among hospital patients (Nemec et al., 2011;Wang X et al., 2013;Chusri et al., 2014).
In patients with sepsis, early detection of both the pathogen and associated drug resistance is important for optimizing therapy and preventing selection of resistance. Every 1-h delay in antibiotics may lead to a 3-7% increase in the odds of a poor outcome (Seymour et al., 2017). The turnaround time (TAT), for identification of the pathogen along with its sensitivity profile, is at least 24-48 h using culture-based diagnostic methods (conventional or automated) (Ahmad et al., 2017). In recent years, MALDI-TOF (matrix-assisted laser desorption ionization time-of-flight) mass spectrometry has been established as a diagnostic tool for identification of microorganisms from pure cultures. However, the high initial investment for the equipment and its limited application for detection of drug resistance in routine diagnostic laboratories are some of the major existing challenges (Kostrzewa et al., 2013;Oviaño at al., 2016). Molecular-based techniques, like polymerase chain reaction (PCR), can further reduce the TAT for the final result with better specificity but are not widely used in resource-limited countries as they require considerable skill, expensive equipment, and trained personnel (Drapała and Kordalewska, 2013). A simple, cost-effective, and rapid method is required to detect both the pathogen and associated antibiotic resistance within the shortest TAT in hospitals with limited resources.
In recent years, loop-mediated isothermal amplification (LAMP) is a widely used technique for rapid diagnosis of infectious diseases in hospitals as it offers a field-friendly alternative to PCR (Drapała and Kordalewska, 2013). Previously, the LAMP assay has been widely used for detection of various pathogens, including influenza A subtypes H1N1, H5N1, and H7N9, Mycoplasma pneumoniae, Mycobacterium tuberculosis, Neisseria meningitidis, Plasmodium vivax, and human immunodeficiency virus (McKenna et al., 2011;Haleyur et al., 2014;Modak et al., 2016;Yadav et al., 2017;Ahn et al., 2019).
LAMP is a simple, rapid, and specific tool that amplifies the DNA under isothermal conditions using Bacillus stearothermophilus (Bst) DNA polymerase and a set of four (to six) specifically designed primers. The ease of detection of amplification and the simplicity of the assay are the hallmarks of this technique (Notomi et al., 2002;Abdullahi et al., 2015). In addition, it eliminates the need for expensive equipment or technical expertise. Hence, it can be used as a rapid tool for point-of-care (POC) diagnosis in healthcare facilities particularly in the resource-constrained settings.
Studies for detection of A. baumannii using the LAMP assay are scarce and are limited to detection of either A. baumannii or carbapenem resistance (Soo et al., 2013;Wang Q et al., 2013;Li et al., 2015;Yamamoto et al., 2015;Garciglia et al., 2020;Khirala et., 2020;Tesalona et al., 2020). In the present study, the LAMP assay was designed for detection of clinically significant members of the ACB complex (A. baumannii, A. pittii, and A. nosocomialis) and associated carbapenem resistance.

Study Settings (Study Site and Ethical Consideration)
The study was conducted at the Department of Microbiology, Vardhman Mahavir Medical College and Safdarjung Hospital, New Delhi, from May 2018 to February 2019. The LAMP assay was standardized for detection of clinically significant members of the Acinetobacter calcoaceticus-baumannii complex (A. baumannii, A. pittii, and A. nosocomialis) targeting the internal transcribing spacer (ITS) region between 16S and 23S rRNA genes and associated carbapenem resistance mediated by bla OXA-23 . This study was approved by the institutional ethics committee (IEC/VMMC/SJH/Project/April 2018/1056). The workflow of the study is summarized in Figure 1.
• Alignment of the above 10 sequences demonstrates that our consensus sequence is conserved across the diverse sequence of three species (Figure 2A). Hence, the consensus ITS 16S-23S rRNA sequence shown in Figure 3 was finally used to design the LAMP primers that included forward and backward outer primers (F3 and B3), forward and backward inner primers [FIP(F1c + F2) and BIP(B1c + B2)], and forward and backward loop primers (LF and LB). This consensus sequence was also aligned with the sequence of Acinetobacter calcoaceticus and non-ACB complex species (A. lwoffii, A. radioresistens, A. haemolyticus, and A. junii) to study the specificity of primers ( Figure 2B).  The bla OXA-23 -mediated carbapenem resistance was detected using OXA-23 LAMP primers described previously by Yamamoto et al. (2015).
Performance of the LAMP assay was validated with PCR. Forward and backward outer LAMP primers (F3 and B3) of ITS and OXA-23 were used for the PCR assay. The primers used in this study were procured from Integrated DNA Technologies, Inc., United States, in lyophilized form ( Table 1). Primers were reconstituted using nuclease-free water and stored at −20°C.

Selection of Bacterial Strains and DNA Extraction
A. baumannii ATCC 19606 and a pre-characterized carbapenemresistant clinical isolate of A. baumannii positive for bla OXA-23 (CRAB/05/RICU/VMMC-SJH) were used to standardize the LAMP and PCR assays. The specificity of assay was determined using diverse strains of A. baumannii (N 30), A. FIGURE 3 | A universal consensus sequence of the ITS 16S-23S rRNA gene that was used to design the LAMP primers for detection of significant members of the Acinetobacter calcoaceticus-baumannii (ACB) complex. Red color bases signify the mixed bases used in place of different bases present in A. baumannii, A. nosocomialis, and A. pittii. The sequences sites for ITS Ab1 and Ab2 LAMP primers are designated by upper and lower horizontal arrows, respectively. Right and left arrows indicate sense and reverse complementary sequences that were used. pittii (N 6), A. nosocomialis (N 2), non-ACB complex species (N 21), and non-Acinetobacter species (N 10). Details of bacterial strains used in this study are summarized in Table 2.
All reference and clinical strains were sub-cultured on Mueller Hinton Agar (MHA) [HiMedia Pvt. Ltd., India] and incubated at 37°C. After overnight incubation, genomic DNA was extracted using the boiling prep method described previously (Li et al., 2015) with modifications. Briefly, two or three isolated colonies of organisms were suspended in 100 µl of nuclease-free water and mixed well. Bacterial suspension was heated at 100°C for 15 min and then placed on ice for 10 min.
Finally, suspension was centrifuged at 12,000 rpm for 5 min. Approximately 60 µl of the supernatant was stored at −20°C for LAMP and PCR assays.

Controls for LAMP and PCR Assays
The positive control (PC) and negative control (NC) used for the LAMP and PCR assays included A. baumannii ATCC 19606 and Escherichia coli (E. coli) ATCC 25922 for ITS primers and CRAB/ 05/RICU/VMMC-SJH and A. baumannii ATCC 19606 for OXA-23 primers, respectively. For all the reactions, nuclease-free water (NFW) was used as a reagent control (RC).

Determination of Detection Time for LAMP Assay
The LAMP assay was performed using 25 μl of reaction mixture that included 23 μl of master mix and 2 μl of genomic DNA of control strain or nuclease-free water.

Preparation of Master Mix
The master mix for the LAMP assay included 2X of reaction mixture buffer (40 mM

LAMP Conditions and Detection Time
As the activity of Bst polymerase enzyme is optimal at temperature 65°C (Chander et al., 2014), the LAMP assay was initially performed at this temperature. The test was performed separately for ITS and OXA-23 primers using multiple sets of PC, NC, and RC (each set for a particular time) in a heating block at 65°C. This included 11 sets for ITS and five sets for OXA-23. To detect the minimum time required for the positive assay, the results were observed every 5 min from 10 to 60 min for ITS primers and from 10 to 30 min for OXA-23 primers. At an interval of every 5 min, a set of PC, NC, and RC were picked and mixed well with the fluorescent dye on the inner side of the cap and the results were observed visually.

Result Interpretation
The color of the LAMP product was observed under UV light or by direct visual inspection against a white or black background. The shortest time of detection was also observed. A change in color from orange to green and no color change were indicative of a positive and a negative result, respectively.

PCR Assay
The PCR was performed using forward and backward outer ITS and OXA-23 LAMP primers (F3 and B3). The annealing temperature of each set was determined using gradient PCR (Eppendorf master cycler, Hamburg, Germany). The final volume for the PCR reaction mixture was 25 μl that included 23 μl of master mix and 2 μl of genomic DNA of control strains or nuclease-free water. The final reaction mix consisted of following reagents (final concentration): 10 mM Tris-HCl (pH 8.8), 50 mM KCl, 2 mM MgCl 2 , 200 µM of each dNTP, 0.2 µM concentration of each primer (F3 and B3), and 1 U of Taq DNA polymerase (Thermo Scientific, United States). After preparation of master mix, 2 μl of genomic DNA (about 100 ng/μl concentration) of PC (A. baumannii ATCC 19606 for ITS primers and CRAB/05/RICU/VMMC-SJH for OXA-23 primers) and NC (E. coli ATCC 25922 for ITS primers and A. baumannii ATCC 19606 for OXA-23 primers) and 2 μl of NFW (as an RC) were added in respective tubes. The PCR assay was performed for 30 cycles after initial denaturation for 5 min at 94°C and each cycle consisting of 30 s of denaturation at 94°C, 30 s of annealing at the determined optimum temperature, and 45 s of extension at 72°C. A final 10 min extension step was performed at 72°C.
The amplified products were analyzed by gel electrophoresis using 1% agarose gel stained with ethidium bromide. A PCR ruler (100 bp) (Thermo Scientific, United States) was used as the molecular-size marker, and Gel images were acquired using a Gel Doc Alpha Imager "EP" system (Alpha Innotech, CA, United States) for interpretation of PCR results.

Sensitivity of LAMP and PCR Assays Based on Limit of Detection
The limit of detection (LOD) of LAMP and PCR assays was determined in terms of DNA concentration and colony count (cfu/ml) using A. baumannii ATCC 19606 (for ITS Ab1 and Ab2 primers) and CRAB/05/RICU/VMMC-SJH (for OXA-23 primers). To determine the LOD using DNA, the concentrations were measured using a Nanodrop 2000c Spectrophotometer (Thermo Scientific, United States) and adjusted to 100 ng/μl. The DNA was then diluted serially (10fold) using nuclease-free water to produce concentrations ranging from 100 ng/μl to 0.1 fg/μl.
In addition, the LOD was also determined using colony count. Bacterial suspension of 0.5 McFarland standards (≈1.5 × 10 8 cfu/ ml) was prepared from respective strains using a DEN-1 McFarland Densitometer (Biosan Sia, Latvia). The turbidity of suspension was adjusted to 1.0 × 10 8 cfu/ml and diluted serially (10-fold) to obtain dilutions ranging from 1.0 × 10 8 to 1.0 × 10 2 (in cfu/ml). The DNA was extracted from serially diluted suspensions using the boiling prep method.
The LAMP and PCR assays were carried out using 2 μl of genomic DNA obtained from various dilutions of DNA and colony counts along with the NC and RC. The LAMP assay was performed in a heating block at 65°C for 10-60 min (ITS primers) and 10-30 min (OXA-23 primers), and the results were observed at 5 min intervals. For PCR, the test was performed as per conditions specified in PCR Assay.

Effect of Various Temperatures on LAMP Reaction
The limit of detection of LAMP assay was studied at 65°C. The effect of temperature was assessed using least concentration (of DNA and colony count). Duplicate vials of PC, NC, and RC were prepared, and the LAMP assay was performed using the ITS primer at various temperatures ranging from 60 to 65°C (at an interval of 1°C).

Selection of Primers
Among the five sets of ITS LAMP primers designed for identification of the consensus region of ITS 16S-23S rRNA gene of A. baumannii, A. pittii, and A. nosocomialis, only two sets of primers (namely, ITS Ab1 and ITS Ab2) were selected based on the BLAST analysis. Both primer sets showed green fluorescence indicating a successful amplification. Primer sequences of ITS Ab1 and ITS Ab2 are indicated by upper and lower arrows, respectively, in Figure 3.

Optimal Detection Time of LAMP Assay
The LAMP assay was performed at 65°C using 100 ng/μl genomic DNA of the positive and negative controls, and the detection time was 20, 45, and 10 min for the ITS Ab1, Ab2, and OXA-23 primer set, respectively ( Table 3). Using SYBR green, the color change from orange to green was indicative of a successful amplification/positive test, whereas no color change was indicative of no amplification/negative test. Among ITS primers, the ITS Ab1 primer set amplified the target sequence within the shortest time.

PCR Results
The optimal annealing temperature for outer LAMP primers (F3 and B3) of ITS Ab1, ITS Ab2, and OXA-23 was 52.5, 52.5, and 50.5°C, respectively. The amplified products from positive control (A. baumannii ATCC 19606 for ITS Ab1 and Ab2 and CRAB/05/ RICU/VMMC-SJH for the OXA-23 primer) were observed on 1% gel corresponding to a band size of 221, 223, and 200 bp, respectively ( Figures 4A,B), while no bands were observed for negative (E. coli ATCC 25922 for ITS Ab1 and Ab2 and A. baumannii ATCC 19606 for OXA-23) and reagent controls.

Sensitivity of LAMP and PCR Assays
The limit of detection of LAMP and PCR assays is shown in Figures 4A and B and Table 3. In brief, the detection limit of LAMP assay using ITS Ab1 and Ab2 LAMP primers was 100 pg/ μl (using DNA concentration), which was 10-fold more sensitive than PCR (1 ng/μl). While using different colony counts, the detection limit of LAMP for ITS Ab1 and Ab2 primers was 3 | Limit of detection of LAMP and PCR assays from different DNA concentrations and colony counts using ITS (Ab1 and Ab2) and OXA-23 primers for detection of clinically significant members of the ACB complex and carbapenem resistance, respectively.
• The LAMP assay was performed at various temperatures ranging from 60 to 65°C. A complete change in color from orange to green was observed at 63-65°C. In contrast at 60-62°C, this color change was not visually distinct. Hence, the optimal temperature range for the LAMP reaction was 63-65°C (Supplementary Figure S1).

Specificity of LAMP
The specificity of the LAMP assay was determined using ACB complex (A. baumannii, A. pittii, and A. nosocomialis), non-ACB complex, and non-Acinetobacter species. PCR detected both ACB complex species (N 38) and non-ACB complex species (N 21) and was negative for all non-Acinetobacter species (N 10). In contrast, the LAMP assay was more specific as all diverse strains of A. baumannii, A. pittii, and A. nosocomialis were amplified successfully, while non-ACB complex and non-Acinetobacter species were not amplified (Supplementary Figure S2).

DISCUSSION
In the last decade, the reports of infections associated with the ACB complex among hospitalized patients have increased. A. baumannii is emerging as an important cause of pneumonia, bacteremia, urinary tract infection, meningitis, and wound infections (Manchanda et al., 2010;Chen et al., 2014). Various countries, including India, have reported high resistance to carbapenems in A. baumannii, ranging from 40 to 75% (Vijayakumar et al., 2019). CRAB has been classified as a priority one pathogen among the 12 antibiotic-resistant "priority pathogens" by the WHO (Tacconelli et al., 2018). Resistance to carbapenems is mediated by various OXA enzymes (OXA-23, OXA-51, OXA-58, and OXA-24) (Hsu et al., 2017;Butler et al., 2019). Acinetobacter harboring bla OXA-23 have emerged globally and are also the most prevalent carbapenemase gene circulating in Asian countries, particularly in China and India (Mugnier et al., 2010;Liu et al., 2015;Jain et al., 2019;Kumar et al., 2019;Vijayakumar et al., 2019). In a multicentric study (Vijayakumar et al., 2019) reported from India, bla OXA-23-like was the most common mechanism of carbapenem resistance and was observed in 97% of isolates. In this study, carbapenem resistance mediated by bla OXA-24-like and bla OXA-58-like was not detected. Similarly, Kumar et al. (2019) observed a high prevalence of bla OXA-23-like (97.7%) in CRAB followed by bla NDM-1 (29.1%) and bla OXA-58-like (3.5%). In a recent study among patients with VAP from our center (Jain et al., 2019), resistance was mediated by bla OXA-23-like in 96.3% (26/27) of CRAB. These studies suggest that bla OXA-23-like can be used as a screening marker for detection of carbapenem resistance among Acinetobacter isolates and used in this study.
Early diagnosis of clinically significant ACB complex infections, associated with carbapenem resistance, is important to initiate early optimal therapy, implement antibiotic stewardship programs, and prevent selection of resistance. Conventional culture-based detection methods are timeconsuming and delay the optimum therapy, resulting in high morbidity and poor outcomes (Ahmad et al., 2017). Other molecular-based diagnostic methods require initial investments, maintenance, and proprietary ownership, and thus, these techniques are not a suitable option for resourcelimited countries (Drapała and Kordalewska, 2013). A point-ofcare (POC) test is required for identification of the pathogen and associated drug resistance for optimal management of lifethreatening infections, screening of patients colonized with resistant strains, and preventing selection and dissemination of resistant isolates.
LAMP is a qualitative assay, in which the DNA is amplified under isothermal conditions and the results are interpreted visually by appearance of turbidity or fluorescence. Low investment, easy interpretation, simplicity, and rapid detection are the most significant features of the LAMP assay, which make it a useful POC test (Abdullahi et al., 2015;Notomi et al., 2002).
• The strength of the study was that the LAMP assay was standardized for detection of the other emerging clinically important members of the ACB complex, i.e., A. pittii and A. nosocomialis in addition to A. baumannii, and associated carbapenem resistance. In addition, two targets, namely, ITS 16S-23S rRNA and bla OXA-23 , were used for identification of significant members of the ACB complex and carbapenem resistance, respectively. Previous studies have designed the LAMP assay for identification of A. baumannii using a single target. The various targets used in these studies are bla OXA-51 (Li et al., 2015;Garciglia et al., 2020), ITS 16S-23S rRNA (Soo et al., 2013), adeS (Khirala et., 2020), and bla OXA-23 (Yamamoto et al., 2015 andTesalona et al., 2020;Garciglia et al., 2020). The application of these assays is limited as they detect either the pathogen or associated drug resistance. The assay using bla OXA-51 , ITS 16S-23S rRNA, and adeS as targets only detects A. baumannii rather than significant members of the ACB complex, while that using bla OXA-23 only detects carbapenem-resistant A. baumannii. The other strength of this assay was that the LOD and sensitivity of the assay were detected using both DNA concentration (/µl) and colony count (cfu/ml).
Various primers were designed targeting the ITS 16S-23S rRNA region for identification of A. baumannii, A. pittii, and A. nosocomialis, and two primers (ITS Ab1 and Ab2) were selected for the final assay, which was performed at 65°C, the optimal temperature for Bst polymerase (Chander et al., 2014) and carbapenem-resistant gene (OXA-23).
The sensitivity of LAMP assay, based on the LOD, was compared with that of PCR. The LAMP assay was found to be more sensitive in terms of both DNA concentration (/µl) and colony count (cfu/ml).
The majority of studies have validated the LOD of LAMP with PCR using different concentrations of DNA. In the present study, the detection limit of LAMP assay for ITS Ab1 and bla  primers was 100 pg/μl and 1 pg/μl of DNA, respectively, which was 10-and 100-fold more sensitive than PCR ( Table 3). The similar findings were observed in previous studies in which LAMP was found to be 100-fold (Soo et al., 2013;Yamamoto et al., 2015) and 10-fold (Li et al., 2015;Garciglia et al., 2020) more sensitive than PCR.
While using different colony counts (cfu/ml), the detection limit of LAMP assay for ITS Ab1 and bla OXA-23 primers was 1 × 10 4 and 1 × 10 3 cfu/ml, respectively, which was 10 4 -and 10 5fold more sensitive than PCR (Table 3). Limited studies have reported the LOD of LAMP using colony count. Wang Q et al. (2013) have studied the LOD using different colony counts, and RealAmp (qLAMP) was used for identification of A. baumannii targeting the pgaD gene. In this study, the LOD of LAMP was 1 × 10 3 cfu/ml, which was 10-fold more sensitive than conventional PCR (1 × 10 4 cfu/ml).
Based on the limit of detection, the detection time of our LAMP assay varied between 20 and 30 min, 45 and 50 min, and 10 and 15 min for ITS Ab1, ITS Ab2, and OXA-23 primers, respectively ( Table 3). As the shortest detection time was observed with primers ITS Ab1 and OXA-23, they are recommended as optimal primer sets for the assay. In previous studies, the optimal temperature and detection time were similar to our findings and reported to be 65°C for 60 min (Li et al., 2015;Garciglia et al., 2020), 58-64°C for 30 min (Soo et al., 2013), and 65°C for 20 min (Yamamoto et al., 2015).
• In our study, the LAMP assay was found to be highly specific and was negative for all non-Acinetobacter species and non-ACB complex species, and these findings were in concordance with those of previous studies conducted by Soo et al. (2013) and Li et al. (2015). On the contrary, all diverse clinical strains of A. baumannii, A. pittii, and A. nosocomialis were detected by using ITS primers, which demonstrates that the LAMP assay can be established for different bacterial clones associated with different genotypes, and the diversity of the strains does not affect the assay. The similar findings were observed by Yamamoto et al. (2015), in which 113 bacterial strains of CRAB with different genotypes were detected by the LAMP assay using bla OXA-23 as a target.
There were a few limitations of this study. Although this study was designed for detection of clinically significant members of the ACB complex (A. baumannii, A. pittii, and A. nosocomialis), only eight diverse strains of A. pittii (6) and A. nosocomialis (2) could be included for testing of the assay as infections associated with these species are limited or underreported (Chatterjee et al., 2016). The second limitation of this study is that the assay has to be performed in two steps for identification of both the pathogen and carbapenem resistance. As, in the LAMP assay, four to six primers are required for amplification of one target, if multiple targets are used in a single assay, it causes primer-primer interaction and leads to a false positive result.
Early diagnosis of life-threatening infections (i.e., sepsis, pneumonia, and UTI) and colonization (rectal carriage and environmental screening) with a resistant pathogen is important for optimal management and prevention of colonization and further dissemination of the resistant pathogen. In such conditions, the LAMP assay is a potential promising POC test for detection of resistant pathogens. Before this assay can be used in a diagnostic lab, more experiments need to be performed with direct clinical samples to establish the efficacy of the LAMP assay.
In conclusion, the LAMP assay can be used as a potential (simple, rapid, and cost-effective) tool for rapid detection of pathogens, especially in resource-constrained countries, and can be adapted for detection of pathogens from various clinical samples such as blood and other fluids. Also, depending on the emerging pathogen and locally prevalent resistant gene, the assay can be modified accordingly.

CONTRIBUTION
A rapid molecular diagnostic tool has the most important role in the management of pathogens associated with life-threatening infections (i.e., sepsis, pneumonia, and UTI) and colonization (rectal carriage and environmental screening). As per the WHO factsheet, October 13, 2020, antimicrobial resistance (AMR) is one of the top 10 global public health threats faced by humanity. Early detection of resistance is important for optimal management, prevention of colonization, and further dissemination of resistant pathogens. Every 1-h delay in antibiotics may lead to a 3-7% increase in the odds of a poor outcome. Carbapenem-resistant Acinetobacter baumannii has been classified as a priority one critical pathogen by the WHO and is of major concern because of the limited therapeutic options and high mortality rate.
Conventional culture-based methods are time-consuming, and molecular-based methods require initial investments, maintenance, and proprietary ownership. The LAMP assay is a simple, rapid, and cost-effective molecular technique that can be used as a potential point of care for rapid detection of emerging resistant pathogens. LAMP is a qualitative assay, in which the DNA amplifies under isothermal conditions and the results can be interpreted easily. Also, depending on the emerging pathogen and locally prevalent resistant gene, the assay can be modified accordingly.

DATA AVAILABILITY STATEMENT
The original contributions presented in the study are included in the article/Supplementary Material, and further inquiries can be directed to the corresponding author.

ETHICS STATEMENT
The present study was approved by the Institutional Ethics Committee of Vardhman Mahavir Medical College and Safdarjung Hospital, New Delhi, India (No. IEC/VMMC/SJH/ Project/April 2018/1056).