Front. Neurosci.Frontiers in NeuroscienceFront. Neurosci.1662-453XFrontiers Media S.A.10.3389/fnins.2016.00356PsychiatryProtocolsAAV Vectors for FRET-Based Analysis of Protein-Protein Interactions in Photoreceptor Outer SegmentsBecirovicElvir12*BöhmSybille12NguyenOng N. P.12RiedmayrLisa M.12HammelmannVerena12SchönChristian12ButzElisabeth S.12Wahl-SchottChristian12BielMartin12MichalakisStylianos12*1Department of Pharmacy – Center for Integrated Protein Science Munich (CiPSM), Ludwig-Maximilians-Universität MünchenMunich, Germany2Department of Pharmacy – Center for Drug Research, Ludwig-Maximilians-Universität MünchenMunich, Germany
Edited by: Hildegard Büning, University of Cologne, Germany
Reviewed by: Peter Christian Kloehn, University College London, UK; Jiajie Diao, University of Cincinnati, USA
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
Fluorescence resonance energy transfer (FRET) is a powerful method for the detection and quantification of stationary and dynamic protein-protein interactions. Technical limitations have hampered systematic in vivo FRET experiments to study protein-protein interactions in their native environment. Here, we describe a rapid and robust protocol that combines adeno-associated virus (AAV) vector-mediated in vivo delivery of genetically encoded FRET partners with ex vivo FRET measurements. The method was established on acutely isolated outer segments of murine rod and cone photoreceptors and relies on the high co-transduction efficiency of retinal photoreceptors by co-delivered AAV vectors. The procedure can be used for the systematic analysis of protein-protein interactions of wild type or mutant outer segment proteins in their native environment. Conclusively, our protocol can help to characterize the physiological and pathophysiological relevance of photoreceptor specific proteins and, in principle, should also be transferable to other cell types.
The outer segments (OS) of rod and cone photoreceptors are highly specialized cilia harboring all proteins involved in light-induced phototransduction (Arshavsky and Burns, 2012). Mutations in genes encoding these proteins lead to untreatable diseases that severely impair rod and/or cone structure and/or functionality (Berger et al., 2010). The majority of these genes encode proteins that are organized in large macromolecular complexes assembled by networks of homomeric and/or heteromeric protein-protein interactions (Roepman and Wolfrum, 2007). To decipher pathomechanisms underlying the retinal disorders and to develop appropriate treatments, the identification and characterization of these networks is inevitable. So far, the vast majority of OS protein-protein interaction studies in photoreceptors were performed using classical biochemical techniques (Goldberg et al., 1995; Loewen and Molday, 2000; Poetsch et al., 2001; Jastrzebska et al., 2004; Michalakis et al., 2011; Knepp et al., 2012). However, the biochemical techniques have several limitations: (i) They strongly rely on the availability of antibodies with high affinity and specificity, (ii) they do not necessarily reflect “true” interactions since, due to the tissue homogenization, some proteins may randomly interact even though they are spatially separated in vivo, (iii) they do not allow for dynamic measurements, and (iv) exact quantification of interactions is rather difficult as many different technical parameters which might influence the interaction must be controlled rigorously.
With regard to these obstacles, FRET is superior to the biochemical approaches. One important constraint of FRET is the fact that it requires the co-expression of the fluorescently tagged molecules in a given cell type. This can be easily handled in heterologous expression systems, however, in complex organisms like mammals the application of FRET has been hampered by the laborious and time consuming generation of transgenic animals. Therefore, only a few FRET-based studies were performed in vivo, most of them using FRET biosensors for analysis of spatiotemporal dynamics of small signaling molecules (Hovan et al., 2010; Hirata et al., 2012; Wen et al., 2013; Kumagai et al., 2014). Here, we describe a protocol for systematic monitoring of protein-protein interactions without the necessity of generating transgenic animals. The technique utilizes adeno-associated virus (AAV) vectors that are valuable tools for in vivo gene transfer into brain and retinal neurons (Schön et al., 2013; Murlidharan et al., 2014; Trapani et al., 2014; Zacchigna et al., 2014). AAVs lead to long-term ectopic expression of the transgene in mammals and thus can be used as a rapid alternative to the generation of transgenic animals. We have already used AAV mediated viral gene expression in retinal neurons in our previous studies (Becirovic et al., 2014, 2016; Nguyen et al., 2016).
The protocol allows for rapid and robust measurements of sensitized acceptor emission FRET on isolated virally transduced murine photoreceptor OS. The complete procedure can be performed within 3 weeks on wild type animals and requires only limited expertise and special equipment (Figure 1). We show that this method is suitable for the detection and quantification of protein-protein interactions of proteins involved in the pathogenesis of hereditary degenerative retinal diseases. We propose the application of this method for FRET-based protein-protein interaction studies in other primary cilia of many cell types to study the pathogenesis of other ciliopathies.
Schematic overview of the main steps of the procedure. AAV vectors encoding the FRET fusion proteins are produced in HEK293T cells (day 1–10). Single AAV vectors and combinations of AAVs encoding the FRET partners are delivered into the subretinal space of wildtype mice (day 11). Ten days later, OS are isolated for ex vivo FRET measurements.
Experimental procedure
The genes of interest encoding each of the protein-protein interaction partners are C- and/or N-terminally fused to the genes encoding citrine or cerulean, two FRET-optimized derivatives of YFP and CFP, respectively (Griesbeck et al., 2001; Rizzo et al., 2004). Each of these constructs is then cloned into the multiple cloning site of a rAAV cis-plasmid containing the rod photoreceptor specific human rhodopsin (hRHO) (Allocca et al., 2007) or murine short wavelength opsin (mSWS) promoter (Michalakis et al., 2010a), a Woodchuck hepatitis virus posttranscriptional regulatory element (WPRE), and a bovine growth hormone polyadenylation signal (BGH pA). Subsequently, each rAAV cis plasmid is co-transfected with the trans (AAV helper and Adeno helper) plasmids into HEK293T cells using triple Ca2+ phosphate transfection. rAAV particles are then purified in a multistep procedure that yields high titers of approx. 1013 vector genomes (vg) per ml. For FRET measurements, 1 × 109 total vg of each construct is delivered into the subretinal space of anesthetized mice. For co-transduction experiments of two titer-matched constructs a total number of 2 × 109 total vg is injected. The co-transduction efficiency was up to 90% in rods and up to 30% in cones after co-delivery of mixtures of two rAAVs. The isolation of rod or cone OS was performed 10–14 days post-injection using a modified version of the mechanical share method (Mitchell et al., 2009). Three cube FRET measurements were carried out using a slightly modified version of the protocol described previously (Erickson et al., 2003; Shaltiel et al., 2012; Ben Johny et al., 2013). The isolated OS were stable for several hours after isolation, which in principle also allows for dynamic FRET measurements of single interactions.
Using this method, we were able to confirm several homomeric and heteromeric protein-protein interactions in rod OS that had been previously observed using other (biochemical) methods. In addition, we also identified novel protein-protein interactions in OS of rods and cones. Furthermore, we demonstrate that FRET is applicable to quantify the effects of disease associated point mutations on protein-protein interactions in these compartments. Conclusively, we show that our FRET protocol enables robust qualitative and quantitative measurements of protein-protein interactions in small cellular compartments like photoreceptor OS.
Advantages of the method
Compared to FRET and other ex vivo measurements of protein-protein interactions, which are currently widely used, this method has several advantages:
It can be performed within 3 weeks including the production of specific rAAVs. The isolation of OS can be carried out within a few minutes and yields a high quantity of OS of adequate quality and purity.
It allows for systematic analysis of protein-protein interactions ex vivo in a specialized small compartment with preserved native morphology.
It is principally transferable to analyses of protein-protein interactions in ciliary compartments of other tissues (e.g., respiratory cilia and olfactory cilia). This is of special importance for deciphering the disease mechanisms of a large group of diseases known as ciliopathies.
As isolated OS are stable for up to 6 h, the method can also be used for dynamic FRET measurements.
The protocol was established in wild type mice. Thus, it allows for systematic analysis of disease mechanisms of single disease associated point mutations without the time consuming generation of transgenic animals.
It can in principle be used to determine the relative binding affinities of single interactions.
The co-transduction efficiency for two constructs was up to 90% for rod OS and up to 30% for cone OS. Hence, a sufficient number of OS co-expressing both proteins of interest can be isolated from a single animal.
In principle, it can be adapted for the establishment of FRET measurements on retinas of living animals.
Due to its easy handling our protocol should also be transferable to other tissues or organisms.
Limitations of the method
There are a few limitations of the method, which can be overcome by appropriate techniques or conditions:
With respect to the packaging capacity of rAAVs (5 kb) (Trapani et al., 2014), this method seems less suitable for analysis of protein-protein interactions of large proteins. However, there are several approaches showing that larger transcripts can also be packaged into rAAVs, even though with lower efficiencies (Trapani et al., 2014).
The endogenous wild type proteins in the OS of transduced photoreceptors interfere with the labeled constructs and lead to overall lower FRET efficiencies than expected from in vitro experiments (incomplete labeling) (Becirovic et al., 2014). This limitation should be of relevance only if weak interactions are expected. This issue could be overcome by using appropriate single or double knock-out animals, which lack expression of the endogenous (unlabeled) proteins of interest.
So far, we found no short or long term toxic effects of the fluorophores on the structural integrity of the retina, which is consistent with previous studies (Bennett et al., 1999; Becirovic et al., 2014). However, we cannot exclude that large amounts of specific cerulean- or citrine-tagged proteins could have toxic effects that influence photoreceptor function and morphology. Therefore, to exclude any toxic effects, we suggest using histological analysis of retinal cross sections prior to the actual FRET measurements for each construct.
In the case of three cube FRET, in addition to the simultaneous delivery of two FRET partners, injections of single FRET constructs are also necessary. They serve as bleed-through and crosstalk controls for the determination of the FRET efficiencies.
Overexpression of the tagged proteins by strong promoters might result in an artefactual FRET signal. To exclude this possibility, additional controls might be necessary. In this context, the most eligible control is to use point mutations within the protein-protein interaction site of one (or both) FRET partners. If the protein interaction interface is not known, artefactual FRET signal can be excluded by overexpressing other proteins not expected to interact with the respective FRET partner.
Bulky fluorescent tags could possibly hinder proper trafficking or localization of the fusion protein (Feilmeier et al., 2000). In addition, they might influence the proper folding and the stability of the protein. In turn, incorrect folding may also affect the fluorophore itself and lead to little or no fluorescence (Waldo et al., 1999). If these problems occur, they can be overcome by varying the position of the fluorescent tag within the protein or by placing a short linker sequence between tag and protein.
Materials and equipmentAnimals
All procedures were performed on P14-21 C57BL/6J mice with permission from local authorities (District Government of Upper Bavaria). Anesthesia was performed by subcutaneous injection of ketamine (40 mg/kg body weight) and xylazine (20 mg/kg body weight). Euthanasia was performed by cervical dislocation.
Reagents
Sodium chloride (NaCl; VWR, cat. no. 27810.364)
Potassium chloride (KCl; Carl Roth, cat. no. 6781.1)
AAV cis (for cloning of the expression cassette) and trans plasmids (encoding for Cap, Rep and adenoviral helper genes) can be obtained from various sources including Penn Vector Core (http://www.med.upenn.edu/gtp/vectorcore) or from UNC Vector Core (http://www.med.unc.edu/genetherapy/vectorcore, see also Ref. Grieger et al., 2006)
2x BBS transfection solution Final component concentrations are 45 mM BES, 280 mM NaCl, 1.5 mM Na2HPO4. Adjust the pH to 6.95 and sterile filtrate. Prepare 50 ml aliquots and store them at 4°C for up to 1 year.
Lysis Buffer Final component concentrations are 150 mM NaCl, 50 mM TRIS. Adjust the pH to 8.5 and sterile filtrate. Prepare freshly before use.
15% iodixanol solution Final component concentrations are 1x PBS (phosphate buffered saline), 1 mM MgCl2, 2.5 mM KCl, 1 M NaCl, 15% Optiprep. Add phenol red (use 1% solution) ad libitum until the solution is visibly colored. Store at 4°C for up to 1 week.
25% iodixanol solution Final component concentrations are 1x PBS, 1 mM MgCl2, 2.5 mM KCl, 25% Optiprep. Add phenol red (use 1% solution) ad libitum until the solution is visibly colored. Store at 4°C for up to 1 week.
40% iodixanol solution Final component concentrations are 1x PBS, 1 mM MgCl2, 2.5 mM KCl, 1 M NaCl, 40% Optiprep. The solution remains uncolored. Store at 4°C for up to 1 week.
60% iodixanol solution Final component concentrations are 1 mM MgCl2, 2.5 mM KCl, 60% Optiprep. Add phenol red (use 1% solution) ad libitum until the solution is visibly colored. Store at 4°C for up to 1 week.
PBS-MK solution Final component concentrations are 1x PBS, 1 mM MgCl2, 2.5 mM KCl. Sterile filtrate and store at 4°C for up to 1 week.
Buffer A Final component concentrations are 20 mM TRIS, 15 mM NaCl. Adjust the pH to 8.5. Store at 4°C for up to 1 week.
Buffer B Final component concentration is 2.5 M NaCl. Adjust the pH to 8.5. Store at 4°C for up to 1 week.
FRET imaging solution Final component concentrations are 140 mM NaCl, 5 mM KCl,
1 mM MgCl2, 2 mM CaCl2, 10 mM glucose, 10 mM HEPES sodium salt. Adjust the pH with 5 M NaOH to 7.4. Prepare 50 ml aliquots and store them at −20°C for up to 1 year. Store thawed aliquots at 4°C for up to 1 week.
FRET imaging setup
Imaging dishes We recommend the use of commercially available glass-bottomed cell-culture dishes for imaging. They should be coated with Poly-L-lysine to ensure complete adherence and immobilization of OS. In our hands, the use of pre-coated dishes (e.g., ibiTreat, ibidi) resulted in insufficient OS adherence.
Inverted epifluorescent microscope, excitation source, and detection All measurements were performed using a Leica DMI6000B inverted fluorescent microscope equipped with a motorized turret and a 63x oil objective. The microscope contains a motorized filter-wheel enabling rapid switching of filter cubes within 300 ms. Of note, the 40x oil objective is also suitable for FRET measurements on isolated OS. The fluorescent intensity is detected by a photomultiplier detection system including a photomultiplier tube (Horiba). As excitation source, we use a DeltaRam monochromator containing a 150W xenon high stability lamp. The use of a conventional LED lamp is also suitable. However, it is crucial to achieve a stable uniform illumination.
Excitation filter, emission filter, and dichroic mirror The following filter cubes are present in our microscope: A donor cube containing a cerulean excitation filter, T455lp dichroic mirror and a cerulean emission filter; an acceptor cube with a citrine excitation filter, T515lp dichroic mirror, and a citrine emission filter. Furthermore a FRET cube containing a cerulean excitation filter, T455lp dichroic mirror and a citrine emission filter. In case of using a monochromator as excitation source, the excitation filters are optional.
Software and data acquisition For photometric FRET measurements, we employ the three cube FRET method (Erickson et al., 2003; Shaltiel et al., 2012; Ben Johny et al., 2013) that utilizes the detection of fluorescence intensities from a specimen using three filter cubes. The excitation source (DeltaRam monochromator) and appendant excitation parameters (e.g., wavelength, pulse duration) are thereby controlled via the software FelixGX, whereas the filter switch is done manually. Fluorescence intensity signals are acquired with the FelixGX software and deciphered with a custom-written MATLAB script. Subsequent analysis is performed using Excel or an adequate data processing software.
Stepwise proceduresProduction and titer determination of rAAVsTransfection, harvesting, and lysis of HEK293T cells
The production and handling of recombinant pseudotyped AAV2-derived vectors is subject to biosafety level 1. For a detailed protocol on AAV production, see ref. (Grieger et al., 2006). 24 h before transfection, confluent 15-cm-dishes of HEK293T cells were split into 15 15-cm-dishes for each construct. For calcium phosphate transfection, the components listed in Table 1 (the amounts are adjusted for transfection of 15 15-cm-dishes) were added in a 50-ml polystyrene tube. The following two equations are used to calculate the amount of pAd Helper plasmid and AAV2/8 Cap/Rep plasmid needed for the pre-transfection mix described in Table 1, respectively:
x(amountofpAdHelper)=m(transgeneAAV)×MM(pAdHelper)MM(transgeneAAV)=270μg×9509gmolMM(transgeneAAV)y(amountofAAV2∕8 Rep∕Cap)=m(transgeneAAV)×MM(AAV2∕8 Rep∕Cap)MM(transgeneAAV)=270μg×4523gmolMM(transgeneAAV)MM = molar mass of double stranded plasmid.
Reagents for a pre-transfection mix of one transgene AAV construct.
Reagent
Amount
Transgene AAV cis plasmid (Michalakis et al., 2010b; Koch et al., 2012)
270 μg
pAd Helper plasmid (pAdDeltaF6 Auricchio et al., 2001)
x μg
AAV2/5 (Hildinger et al., 2001) or AAV2/8 (Gao et al., 2002) Rep/Cap plasmid
y μg
Polybrene (8 mg/ml)
15 μl
Dextran (10 mg/ml)
1500 μl
2.5 M CaCl2
1500 μl
Double-distilled water
ad 15 ml
The listed amounts are for transfection of 15 15-cm-dishes of HEK293T cells.
While vortexing the pre-transfection mix in the polystyrene tube at maximum speed, 15 ml 2x BBS was added dropwise. The mixture was incubated at room temperature for 4–5 min and 2 ml of the transfection mix was added dropwise to each 15-cm-dish of ~80% confluent HEK293T cells. Transfected cells were then incubated at 37°C and 5% CO2 atmosphere for 24 h. Subsequently, the medium from transfected cells was replaced and the cells were incubated at 37°C and 10% CO2 atmosphere for additional 24 h. 48 h post transfection, the cells were harvested by scraping them from each 15-cm-dish. Cell suspensions were collected from 15 dishes in a 500-ml-centrifuge-tube. The cells were centrifuged at 2000 × g for 15 min at 4°C (4000 rpm in a J2-MC Beckman centrifuge using a JA-10 rotor). After medium removal, the cell pellet was gently resuspended in 7.5 ml lysis buffer (volume for cell pellet harvested from 15 15-cm-dishes) and transferred into 50-ml-polystyrene-tubes. The cell suspension was shock-freezed in liquid nitrogen and subsequently thawed at 37°C. Freeze-thaw cycle was repeated two additional times. The resulting cell suspension can be stored at −80°C overnight.
Gradient centrifugation and purification of rAAVs
Benzonase was added to the thawed cell suspension to a final concentration of 50 U/ml followed by an incubation at 37°C for 30 min. Subsequently, the cells were pelleted via centrifugation at 2000 × g for 25 min at 4°C. The virus-containing supernatant was transferred into a Beckman Quick-Seal polypropylene tube. To form the iodixanol gradient, a sterile, long glass pipette, and a Gilson MINIPULS3 pump were used. First, the virus-containing phase was underlaid with 7 ml 15% iodixanol, then with 5 ml 25% iodixanol, followed by 5 ml 40% iodixanol, and at last with 6 ml 60% iodixanol. To avoid mixing of the layers, the pump should be run at the slowest speed. Polypropylene tubes were filled up and accurately balanced with PBS-MK. Prior to centrifugation, the tubes were sealed with the Beckman Tube Topper. Centrifugation was performed at 361.000 × g for 1 h 45 min at 18°C (70.000 rpm in an Optima LE-80K Beckman ultracentrifuge using a 70 Ti rotor). During centrifugation, the virus-containing fraction should accumulate in the 40% phase. After centrifugation, the tube was pierced at the top near the seal for pressurization. To collect the virus-containing phase, a 21-gauge-needle was used with a 5-ml-syringe to pierce the tube through the side at the lower end of the 40–60% interface. During this step, the open site of the needle tip should face the 40% phase. Approximately 5 ml of the 40% phase were collected. The virus-containing phase can be stored in a 15-ml-polystyrene-tube at −80°C until proceeding with the purification step.
For purification, the virus-containing phase was thawed on ice. HiTrap Q FF sepharose column and superloop were connected with the ÄKTAprime plus chromatography system. For collection of the purified fractions, 1.5-ml-centrifuge-tubes were loaded into the tube rack. Dropsync unit was adjusted to position 1. The HiTrap Q FF sepharose column was equilibrated with 25 ml of buffer A at 10 ml/min flow rate. Manual run mode was selected with 1.0 ml/min flow rate, 1 ml fraction size, and the measuring curves were put to starting point via autozero. Virus phase was diluted 1:1 with buffer A prior to application to the ÄKTAprime plus system with a 10 ml syringe to fill the superloop. The virus dilution from the superloop was injected into the ÄKTAprime plus system and 1 ml fractions were collected in 1.5-ml-tubes. During this step, the UV and conductance curves should be monitored via the Äktaprime software. When the conductance curve has reached basal values, the ÄKTAprime plus system was switched to 100% buffer B at 10 ml/min flow rate and 0 ml fraction size to purge the sepharose column from the remaining virus dilution. To wash out the remaining salt from the system, sterile, double-distilled water was used at 10 ml/min flow rate. When the conductance curve reached zero, the washing step was continued for additional 5 min. All of the collected 1-ml fractions within the plateau phase of the conductance curve were pooled. The purified and pooled virus fractions can be stored in a 15-ml-polystyrene-tube at −80°C until continuing with the virus concentration step.
Concentration of rAAVs
For virus concentration, the purified virus fraction was first thawed on ice. 4 ml of the fraction was then transferred to an Amicon centrifugal filter unit and was centrifuged at 2000 × g for 10 min at 20°C (4000 rpm in a Beckman centrifuge using a JA-10 rotor). The flow-through was discarded and the cycles of 4 ml virus fraction transfer and subsequent centrifugation were repeated until the complete virus was loaded to the column and ~500 μl remained in the filter unit. The concentrated virus was washed with 1 ml 0.014% Tween/PBS-MK by pipetting up and down five times. The virus suspension was then centrifuged at 2000 × g at 20°C until 100 μl of concentrated virus suspension remained in the filter unit. The supernatant was aliquoted and stored in 1.5-ml screw cap tubes. Virus suspensions were stored at −80°C until determination of virus titer and subretinal injection.
Titer determination of rAAVs
For titer determination, the virus suspension was diluted 1:500 with double-distilled water. 5 μl of virus dilution, a standard sample, and double-distilled water were used for quantitative real-time PCR according to Tables 2, 3. For standard preparation, a small fragment within the WPRE (woodchuck hepatitis virus posttranscriptional regulatory element) of the pAAV2.1 vector was amplified via PCR. The corresponding primers are listed in Table 4. The PCR product was purified after gel electrophoresis and DNA concentration was determined with a spectrophotometer (Nanodrop 2000c). The concentration of the standard for 1010 copies per 5 μl was calculated according to the following equation:
c(pgμl)=1010×660×1012pgmol×fragmentsize6.022×10231mol×5μlc is the concentration of the standard for 1010 copies per 5 μl;
660 × 1012 pg/mol is the mean molar mass of a base pair (deoxyribosyladenosine with deoxyribosylthymidine or deoxyribosylcytidine with deoxyribosylguanosine);
6.022 × 1023/mol is the Avogadro constant;
The size of the amplified WPRE fragment is given in base pairs.
Pipetting scheme for quantitative real-time PCR.
Reagent
Volume (μl)
Template plasmid (50–100 ng)/standard/double-distilled water (negative control)
5,0
KAPA SYBR FAST Universal x2 qPCR MasterMix
10,0
WPREqF (10 pmol/μl)
1,0
WPREqR (10 pmol/μl)
1,0
Double-distilled water
ad 20,0
Program steps of quantitative real-time PCR for titer determination.
Step
Phase
Temperature (°C)
Time
Cycle numbers
1
Initial Denaturation
95
10 min
1
2
Denaturation
95
10 s
40
3
Annealing
60
5 s
4
Elongation
72
20 s
5
Final elongation
72
5 min
1
Primer sequences for quantitative real-time PCR and standard preparation.
Primer for amplification of standard fragment
Sequence (5′ to 3′)
WPREqF
AGTTCCGCCGTGGCAATAGG
WPREqR
CAAGGAGGAGAAAATGAAAGCC
A 10-fold serial dilution was made to obtain standards at different concentrations. 5 μl of a standard were used to determine the virus titer via quantitative real-time PCR. Standards were stored at −20°C until use.
Subretinal injection of rAAV vectors
The procedure of subretinal rAAV injection was carried out as described by (Mühlfriedel et al., 2013) with slight modifications. The NanoFil 34-gauge beveled needle was sterilized before each experiment. The 10-μl NanoFil syringe was preloaded with the virus suspension under exclusion of air bubbles. The mouse was anesthetized via intraperitoneal injection of xylazine (20 mg/kg) and ketamine (40 mg/kg). Five percent dexpanthenol eye salve was applied to the non-injected eye and the anesthetized mouse was placed on a 37°C heating plate. The eye was dilated with 1% atropine and 0.5% tropicamide solution. The eye fundus was focused with a stereomicroscope until blood vessels became clearly visible. The outer layers of the eye (sclera, choroidea, and retinal pigment epithelium) were then penetrated with the needle in a 60° angle. When the needle was visible beneath the retina, 1 μl (containing approx. 109 rAAV particles) of virus suspension was gradually applied freehand. For the co-delivery of two constructs, a 1:1 mixture of titer matched rAAVs was used. The formation of a clearly visible injection bleb indicated a correct application to the subretinal space. The needle was slowly removed from the eye, which was subsequently treated with gentamicin 5 mg/g and dexamethasone 0.3 mg/g eye salve. The anesthetized mouse was placed under a heat lamp and was monitored until awaking from narcosis. If available, optical coherence tomography (OCT) was conducted immediately after subretinal injection to monitor the injection procedure and the degree of subretinal detachment (Mühlfriedel et al., 2013).
Dissection of murine retinas and isolation of photoreceptor outer segments
The mouse was sacrificed 10 days post injection and the injected eye was proptosed by placing blunt forceps around the optic nerve close to its exit from the eye. The globe was then transected along the equator with a sharp razor blade or scalpel and the vitreous body was removed by carefully pushing it out of the incision with a thin needle. The forceps was pushed upwards to detach the retina from the optic nerve and from the pigment epithelium. The upward movement was gradually continued until the retina lay free on the forceps. The isolated retina was transferred into a petri dish filled with phosphate buffered saline (PBS). The expression or co-expression of fluorescent fusion proteins was analyzed by an epifluorescence microscope (Axioplan 2 imaging, Zeiss). As described in Figure 2A, the retina was transferred into a 1.5-ml-microcentrifuge-tube containing 100 μl PBS. In case of weak expression or in case of isolating cone OS, two (or more) retinas can be pooled at this stage to ensure a sufficient number of fluorescent OS. The OS were separated from the retina by vortexing for 15–30 s. Vortexing should not surpass 30 s as excessive shearing disrupts the shape of OS. Afterwards, centrifugation was conducted at 500 × g for 30 s and the supernatant was carefully transferred to a fresh 1.5-ml-microcentrifuge-tube without disturbing the pellet. The supernatant contained the OS fraction suitable for FRET measurements. If desirable, the quality and fluorescence of purified OS can be analyzed (Figure 2B) on a standard epifluorescence or confocal microscope by transferring 5–10 μl of supernatant on microscope slides topped with cover slips.
OS preparation and FRET. (A) Overview of the protocol for the OS preparation and for the subsequent FRET measurements. (B) Representative images of isolated OS at different time points after the isolation. Scale bar, 3 μm.
FRET measurements on isolated outer segmentsSetup of FRET microscope, software, and OS sample
Calculation of three cube sensitized acceptor emission FRET requires data for FRET donor (cerulean) only and acceptor (citrine) only samples (Erickson et al., 2003; Shaltiel et al., 2012; Ben Johny et al., 2013). Therefore, in addition to the fluorescence signals from OS co-expressing cerulean and citrine constructs, OS expressing cerulean- or citrine-tagged proteins only must be imaged as well. For optimized signal acquisition, we recommend to start the FRET measurements with OS co-expressing both cerulean- and citrine-tagged FRET partners (hereinafter referred to as FRET sample).
Purified OS solution was diluted in 400 μl FRET imaging solution and was transferred to the center of an imaging dish. FRET measurements should be performed on single OS as fluorescence from adjacent OS might interfere with the measurements. Therefore, the density of OS should be adjusted in order to allow for detection of single fluorescent OS within the defined region of interest on the imaging setup (image-plane pinhole). As the density of transduced OS varies with transduction and purification efficiency, it is necessary to individually adjust the amount of OS for each preparation. The OS were allowed to sediment to the bottom for 10–15 min at room temperature. The fluorescence lamp was turned on at least 30 min prior to the experiment to ensure stable illumination. The image-plane pinhole was set to an appropriate size that allows monitoring of a single OS, which was positioned in the center of the axial beam path. This position must not be changed throughout the entire FRET measurements performed on the same day. The FelixGX software was started to acquire the fluorescence intensities. An oil-immersion and high-resolution objective (40x or higher) was used and immersion medium was applied. The imaging dish was placed onto the sample holder and bright field illumination was used to focus on OS. Individual OS were identified based on their characteristic morphology as shown in Figure 2B.
Measurements on the FRET sample
For measurements of FRET samples, OS that express sufficient levels of both citrine and cerulean were used. A fluorescent OS was placed in the center of the optic field and fluorescence from adjacent cells invading the optic field was excluded. Gain and fluorescence intensity settings were adjusted in order to achieve an appropriate signal prior to the first signal acquisition. All subsequent data must be acquired under the same conditions. Fluorescence intensities were collected with the cerulean cube, FRET cube, and citrine cube. The settings for the single cubes are as follows:
For cerulean cube: 426–446 nm excitation filter, T455lp dichroic mirror, and 460–500 nm emission filter; for citrine cube: 490–510 nm excitation filter, T515lp dichroic mirror, and 510–550 nm emission filter; for FRET cube: 426–446 nm excitation filter, T455lp dichroic mirror, and 510–550 nm emission filter.
The data for a single OS was acquired according to the following sequence: cerulean excitation was started and the signals with the cerulean cube followed by the FRET cube were obtained. Then, citrine excitation was carried out and the signal with the citrine cube was obtained. 25–35 individual OS were measured. To subtract the OS autofluorescence, the same three cube protocol as described above was applied to ~10 OS that do not express citrine or cerulean within the corresponding sample.
Cerulean-only expressing preparation
OS with varying expression levels of cerulean were used. For each OS, the fluorescence intensity was measured with the cerulean, FRET, and citrine filter cube according to the same protocol as described above for the FRET sample. Data from at least 15 OS were collected. To subtract the OS autofluorescence, the cerulean, FRET, and citrine cube were measured for ~10 OS that do not express cerulean within the same sample.
Citrine-only expressing preparation
OS with varying expression levels of citrine were chosen. For each OS, the fluorescence intensity was measured with the cerulean, FRET, and citrine filter cube according to the same protocol as described above for the FRET sample. Data from at least 15 OS were collected. To subtract the OS autofluorescence, the cerulean, FRET, and citrine cube were measured for ~10 OS that do not express citrine within the same sample.
Data analysis
The data set consists of three data points per OS, i.e., one intensity value for each filter cube. As controls, we additionally included data points measured from non-fluorescent OS for background subtraction as well as from cerulean-only and citrine-only expressing OS for donor bleed-through and cross-excitation corrections, respectively. The data was transferred to an Excel sheet or an adequate data processing program. For the 10 non-fluorescent OS measured for each of the preparations, i.e. FRET, cerulean-only and citrine-only, the mean intensity values were calculated. These mean values were subtracted from each data point of the particular preparation to adjust for background fluorescence. In order to correct for donor bleed-through, the correction constant RD1 for each of the single data points gathered from the cerulean-only expressing preparation was calculated by dividing the intensities captured with the FRET-cube by those obtained from the cerulean-cube. In order to correct for acceptor cross-excitation, the correction constant RA for each single data point gathered from the citrine-only expressing preparation was calculated by dividing the intensities captured with the FRET-cube by those obtained from the citrine-cube. The mean value for both constants, RD1 and RA, was calculated. Usually, a value of ~0.25 for cerulean (donor-bleed through) and 0.03 for citrine (acceptor cross-excitation) was obtained in our setup. However, these values might differ with fluorophore variant, protein tag, and imaging setup. The calculated constants were used for donor bleed-through and acceptor cross-excitation to evaluate the FRET ratio (FR) for each single measurement according to the following equation:
FR=SFRET-RD1·SceruleanRA·ScitrineScerulean, Scitrine, and SFRET are intensity signals acquired with respective filter cubes (FRET, cerulean, and citrine) in a FRET specimen and RA, RD1 are predetermined factors for calibration issues (RA: Acceptor cross-excitation, RD1: Donor bleed-through). Depending on the imaging setup and, in particular, the filter set used for experiments, a considerable amount of cerulean fluorescence may be detected by the citrine cube. To correct for this, an additional donor bleed-trough correction constant RD2 should be calculated by dividing the cerulean fluorescence intensity obtained with the citrine cube by the one detected with the cerulean cube. Accordingly, the FR equation was adjusted to: (Erickson et al., 2003)
FR=SFRET-RD1·SceruleanRA·(Scitrine-RD2·Scerulean)
In our FRET setup, RD2 was negligibly small and could thus be ignored. However, it should be rigorously tested for each individual imaging setup. The mean value of the previously obtained data was calculated. The mean value represents the overall FR. Note that the FR values are instrumentation dependent. FRET efficiencies (EA) (which are independent of the setup used) can be easily calculated from the FR using the following equation:
EA=[FR-1]·εcitrine(436)εcerulean(436)
εcitrine and εcerulean are the FRET setup specific average molar extinction coefficients for citrine and cerulean, respectively.
Troubleshooting
Problems, possible underlying reasons and advices concerning critical steps of the procedure can be found in Table 5.
Troubleshooting.
Problem
Possible Reason
Solution
Low titer.
Transfection reagents do not have sufficient transfection efficiency.
Test transfection reagents for their efficiencies. Requantify plasmid concentration used for transfection.
pH of HEK293T cell medium is not optimal for transfection.
Remove HEK293T dishes from incubator immediately before transfection.
The sequence of the ITRs (inverted terminal repeats) within the plasmid is not intact, thus replication and packaging of the rAAV vector is inefficient.
Check for the presence of SmaI and/or Eam1105I restriction sites within the palindromic ITR sequence. In case of unexpected restriction fragment band pattern, repeat cloning using an intact rAAV vector.
The injection bleb in the subretinal space is not visible under the surgical/stereomicroscope.
The eye shows damages or opacity of the cornea.
Make sure to choose only mice with clear, intact eyes for subretinal injection. Check the eyes under the stereomicroscope.
Virus suspensions diluted with double-distilled water to adjust the particle concentration do not show optical refraction as clear as the virus suspension in 0.014% Tween/PBS-MK.
Dilute with 0.014% Tween/PBS-MK to adjust virus particle concentration. If the suspension is too viscous, dilute with double-distilled water at a maximum ratio of 1:2 (water-to-virus suspension).
The injection angle is not optimal.
Adjust the injection angle to ~60°.
Loss of many OS.
Removal of the pigment epithelium and ciliary body after retina isolation with foreceps may result in loss of many OS.
Proceed with the next step without any removal of undesirable tissue.
Protein expression level is too low, thus leading to a too weak or absent fluorescence signal.
Virus suspension is not (completely) injected into the subretinal space.
Make sure to see a clear injection bleb as this indicates the correct injection to the subretinal space. An injection into the upper layers of the eye such as sclera or choroidea causes a bleb outside at the globe. If the needle is intravitreal, it can be clearly and sharply seen under the stereomicroscope. By contrast, a needle in the subretinal space (injection angle at ~60°) appears rather blurred. Keep the injection needle for at least 20 s in the bleb to ensure proper delivery of the desired volume. If possible, perform OCT measurements on the anesthetized mouse after injection to confirm detachment of the retina at the injection position.
Virus titer has not been determined correctly.
Double check the virus titer. Otherwise, repeat the virus production.
Time schedule
Transfection of HEK293T cells: 48 h
Isolation of rAAV: 2–4 h (varies depending on number of dishes to be harvested)
Gradient purification and rAAV concentration: 6 h (for 2 different rAAV constructs)
Titer determination via quantitative real-time PCR: 2 h
Preparation of standards for titer determination: 2 h
Subretinal injection: 20 min (per mouse)
rAAV transduction of murine retina and protein expression: 10 days
Isolation of photoreceptor OS: 10 min (per eye)
FRET imaging: 5–9 h (depending on number of retinas to be analyzed)
Data analysis: 2–3 h (depending on number of measurements to be processed).
Anticipated results and discussion
In this protocol, we demonstrate that robust FRET signals can be measured for well-known homomeric and heteromeric interactions of different membrane and soluble proteins in OS of rod and cone photoreceptors. Representative results are found in our previous publications (Becirovic et al., 2014; Nguyen et al., 2016). Selected data from these publications are presented in the modified graphs shown in Figure 3. FRET is given as FRET efficiencies (EA) which can be easily calculated from the FRET ratios (FR) as shown in the “Data Analysis” Section. It is noteworthy to mention that the mean value of EA may not represent the maximal FRET efficiency (EA max). EA max can be calculated if a relatively high variability of the cerulean/citrine molar ratios is present in FRET measurements. If this is the case, single FRET values can be plotted against the cerulean/citrine intensity ratios to obtain the binding curves and to calculate EA max. A comparison of EA max between different constructs allows for the determination of relative binding affinities. Since EA max is directly proportional to the binding affinity, our method in principle should also allow for comparisons of relative binding affinities of single protein-protein interactions in an isolated subcellular compartment.
FRET measurements in isolated photoreceptor OS. (A) Schematic depiction of the single constructs used for the subretinal injection and for the determination of the FRET efficiencies (EA) shown in (C). (B) Representative confocal images of single isolated rod OS co-expressing C-terminally tagged peripherin-2 and rhodopsin. The excitation wavelength and emission filter settings used to obtain the single channels (Donor, FRET and Acceptor) are summarized in the “Stepwise Procedures” section. Scale bar, 1.5 μm. (C) Results of the FRET measurements for different FRET pair combinations given as mean values ± standard error of the mean (SEM). Numbers of independent measurements (n) are given in brackets. EA values for the single FRET pairs are as follows: Rho-Rho, EA = 10.45 ± 0.78; Rho-citr-P, EA = 4.52 ± 0.82; Rho-P-citr, EA = 2.76 ± 0.65; Rho-GARP2, EA = 0.26 ± 0.65; (D) Schematic view of the single constructs used for the subretinal injection and for the determination of the FRET efficiencies (EA) shown in (F). (E) Representative confocal images of single isolated cone OS co-expressing C-terminally tagged peripherin-2 and cone opsin. Scale bar, 1.5 μm. (F) Results of the FRET measurements (given as mean values ± SEM) for different FRET pair combinations as indicated. Numbers of independent measurements (n) are given in brackets. EA values for the single FRET pairs are described elsewhere (Nguyen et al., 2016).
Taken together, our protocol enables the measurement of robust FRET signals ex vivo in small and highly specialized cellular compartments of mammalian cells like OS of murine photoreceptors. This allows for the systematic analysis of protein-protein interactions in a physiological or pathophysiological context of the photoreceptor biology. In particular, it can be used to analyze the effects of disease-associated mutations on protein-protein interactions. OS of photoreceptors are modified cilia. Ciliopathies encompass a very large group of genetic disorders compromising the functional or structural integrity of cilia. Since the isolation of ciliary compartments from other tissues (i.e. kidney, lung, brain, olfactory epithelium) is well-established (Mitchell et al., 2009), our protocol should also be transferable to analyses of protein-protein interactions in any other ciliated tissue. In non-dividing cells, rAAVs lead to an episomal and long-term expression of the respective gene for up to several years (Trapani et al., 2014). Thus, FRET measurements can be performed on several time points during the development of the tissue. Finally, our protocol could also provide an experimental basis for the establishment of FRET measurements in the retina of living animals by means of fundus ophthalmoscopy combined with e.g., conventional fluorescence imaging, 2-photon imaging, multiphoton FLIM-FRET, or near infrared-FRET fluorescence lifetime imaging (Abe et al., 2013; Johnsson et al., 2014).
Author contributions
EB designed the protocol with contribution from SM. EB, SB, ON, LR, VH, CS, and ESB performed the experiments, EB, SB, ON, and ESB analyzed the results. EB, ON, ESB, and SM wrote the manuscript with contribution from CW and MB.
Funding
This work was supported by the Deutsche Forschungsgemeinschaft (DFG, BE 4830/1 1).
Conflict of interest statement
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest. Despite hosting the research topic together with one of the authors of this manuscript, the handling Editor state that the process met the standards of a fair and objective review.
We thank Elisabeth Schulze and Berit Noack for excellent technical support.
ReferencesAbeK.ZhaoL.PeriasamyA.IntesX.BarrosoM. (2013). Non-invasive in vivo imaging of near infrared-labeled transferrin in breast cancer cells and tumors using fluorescence lifetime FRET. PLoS ONE8:e80269. 10.1371/journal.pone.008026924278268AlloccaM.MussolinoC.Garcia-HoyosM.SangesD.IodiceC.PetrilloM.. (2007). Novel adeno-associated virus serotypes efficiently transduce murine photoreceptors. J. Virol.81, 11372–11380. 10.1128/JVI.01327-0717699581ArshavskyV. Y.BurnsM. E. (2012). Photoreceptor signaling: supporting vision across a wide range of light intensities. J. Biol. Chem.287, 1620–1626. 10.1074/jbc.R111.30524322074925AuricchioA.HildingerM.O'ConnorE.GaoG. P.WilsonJ. M. (2001). Isolation of highly infectious and pure adeno-associated virus type 2 vectors with a single-step gravity-flow column. Hum. Gene Ther.12, 71–76. 10.1089/10430340145098811177544BecirovicE.BohmS.NguyenO. N.RiedmayrL. M.KochM. A.SchulzeE.. (2016). In vivo analysis of disease-associated point mutations unveils profound differences in mRNA splicing of peripherin-2 in rod and cone photoreceptors. PLoS Genet.12:e1005811. 10.1371/journal.pgen.100581126796962BecirovicE.NguyenO. N.PaparizosC.ButzE. S.Stern-SchneiderG.WolfrumU.. (2014). Peripherin-2 couples rhodopsin to the CNG channel in outer segments of rod photoreceptors. Hum. Mol. Genet.23, 5989–5997. 10.1093/hmg/ddu32324963162Ben JohnyM.YangP. S.BazzaziH.YueD. T. (2013). Dynamic switching of calmodulin interactions underlies Ca2+ regulation of CaV1.3 channels. Nat. Commun.4, 1717. 10.1038/ncomms272723591884BennettJ.MaguireA. M.CideciyanA. V.SchnellM.GloverE.AnandV.. (1999). Stable transgene expression in rod photoreceptors after recombinant adeno-associated virus-mediated gene transfer to monkey retina. Proc. Natl. Acad. Sci. U.S.A.96, 9920–9925. 10.1073/pnas.96.17.992010449795BergerW.Kloeckener-GruissemB.NeidhardtJ. (2010). The molecular basis of human retinal and vitreoretinal diseases. Prog. Retin. Eye Res.29, 335–375. 10.1016/j.preteyeres.2010.03.00420362068EricksonM. G.LiangH.MoriM. X.YueD. T. (2003). FRET two-hybrid mapping reveals function and location of L-type Ca2+ channel CaM preassociation. Neuron39, 97–107. 10.1016/S0896-6273(03)00395-712848935FeilmeierB. J.IsemingerG.SchroederD.WebberH.PhillipsG. J. (2000). Green fluorescent protein functions as a reporter for protein localization in Escherichia coli. J. Bacteriol.182, 4068–4076. 10.1128/JB.182.14.4068-4076.200010869087GaoG. P.AlviraM. R.WangL.CalcedoR.JohnstonJ.WilsonJ. M. (2002). Novel adeno-associated viruses from rhesus monkeys as vectors for human gene therapy. Proc. Natl. Acad. Sci. U.S.A.99, 11854–11859. 10.1073/pnas.18241229912192090GoldbergA. F.MoritzO. L.MoldayR. S. (1995). Heterologous expression of photoreceptor peripherin/rds and Rom-1 in COS-1 cells: assembly, interactions, and localization of multisubunit complexes. Biochemistry34, 14213–14219. 10.1021/bi00043a0287578020GriegerJ. C.ChoiV. W.SamulskiR. J. (2006). Production and characterization of adeno-associated viral vectors. Nat. Protoc.1, 1412–1428. 10.1038/nprot.2006.20717406430GriesbeckO.BairdG. S.CampbellR. E.ZachariasD. A.TsienR. Y. (2001). Reducing the environmental sensitivity of yellow fluorescent protein. Mechanism and applications. J. Biol. Chem.276, 29188–29194. 10.1074/jbc.M10281520011387331HildingerM.AuricchioA.GaoG.WangL.ChirmuleN.WilsonJ. M. (2001). Hybrid vectors based on adeno-associated virus serotypes 2 and 5 for muscle-directed gene transfer. J. Virol.75, 6199–6203. 10.1128/JVI.75.13.6199-6203.200111390622HirataE.YukinagaH.KamiokaY.ArakawaY.MiyamotoS.OkadaT.. (2012). In vivo fluorescence resonance energy transfer imaging reveals differential activation of Rho-family GTPases in glioblastoma cell invasion. J. Cell Sci.125(Pt 4), 858–868. 10.1242/jcs.089995HovanS. C.HowellS.ParkP. S. (2010). Forster resonance energy transfer as a tool to study photoreceptor biology. J. Biomed. Opt.15, 067001. 10.1117/1.350502321198205JastrzebskaB.MaedaT.ZhuL.FotiadisD.FilipekS.EngelA.. (2004). Functional characterization of rhodopsin monomers and dimers in detergents. J. Biol. Chem.279, 54663–54675. 10.1074/jbc.M40869120015489507JohnssonA. K.DaiY.NobisM.BakerM. J.McGheeE. J.WalkerS.. (2014). The Rac-FRET mouse reveals tight spatiotemporal control of Rac activity in primary cells and tissues. Cell Rep.6, 1153–1164. 10.1016/j.celrep.2014.02.02424630994KneppA. M.PerioleX.MarrinkS. J.SakmarT. P.HuberT. (2012). Rhodopsin forms a dimer with cytoplasmic helix 8 contacts in native membranes. Biochemistry51, 1819–1821. 10.1021/bi300159822352709KochS.SothilingamV.Garcia GarridoM.TanimotoN.BecirovicE.KochF.. (2012). Gene therapy restores vision and delays degeneration in the CNGB1(−/−) mouse model of retinitis pigmentosa. Hum. Mol. Genet.21, 4486–4496. 10.1093/hmg/dds29022802073KumagaiY.NaokiH.NakasyoE.KamiokaY.KiyokawaE.MatsudaM. (2014). Heterogeneity in ERK activity as visualized by in vivo FRET imaging of mammary tumor cells developed in MMTV-Neu mice. Oncogene34, 1051–1057. 10.1038/onc.2014.2824632612LoewenC. J.MoldayR. S. (2000). Disulfide-mediated oligomerization of Peripherin/Rds and Rom-1 in photoreceptor disk membranes. Implications for photoreceptor outer segment morphogenesis and degeneration. J. Biol. Chem.275, 5370–5378. 10.1074/jbc.275.8.537010681511MichalakisS.MuhlfriedelR.TanimotoN.KrishnamoorthyV.KochS.FischerM. D.. (2010a). Restoration of cone vision in the CNGA3−/− mouse model of congenital complete lack of cone photoreceptor function. Mol. Ther.18, 2057–2063. 10.1038/mt.2010.14920628362MichalakisS.MühlfriedelR.TanimotoN.KrishnamoorthyV.KochS.FischerM. D.. (2010b). Restoration of cone vision in the CNGA3−/− mouse model of congenital complete lack of cone photoreceptor function. Mol. Ther.18, 2057–2063. 10.1038/mt.2010.14920628362MichalakisS.ZongX.BecirovicE.HammelmannV.WeinT.WannerK. T.. (2011). The glutamic acid-rich protein is a gating inhibitor of cyclic nucleotide-gated channels. J. Neurosci.31, 133–141. 10.1523/JNEUROSCI.4735-10.201121209198MitchellK. A.SzaboG.Otero AdeS. (2009). Methods for the isolation of sensory and primary cilia–an overview. Methods Cell Biol.94, 87–101. 10.1016/S0091-679X(08)94004-820362086MühlfriedelR.MichalakisS.GarridoM. G.BielM.SeeligerM. W. (2013). Optimized technique for subretinal injections in mice. Methods Mol. Biol.935, 343–349. 10.1007/978-1-62703-080-9_2423150380MurlidharanG.SamulskiR. J.AsokanA. (2014). Biology of adeno-associated viral vectors in the central nervous system. Front. Mol. Neurosci.7:76. 10.3389/fnmol.2014.0007625285067NguyenO. N.BohmS.GiesslA.ButzE. S.WolfrumU.BrandstatterJ. H.. (2016). Peripherin-2 differentially interacts with cone opsins in outer segments of cone photoreceptors. Hum. Mol. Genet.10.1093/hmg/ddw10327033727. [Epub ahead of print].PoetschA.MoldayL. L.MoldayR. S. (2001). The cGMP-gated channel and related glutamic acid-rich proteins interact with peripherin-2 at the rim region of rod photoreceptor disc membranes. J. Biol. Chem.276, 48009–48016. 10.1074/jbc.M10894120011641407RizzoM. A.SpringerG. H.GranadaB.PistonD. W. (2004). An improved cyan fluorescent protein variant useful for FRET. Nat. Biotechnol.22, 445–449. 10.1038/nbt94514990965RoepmanR.WolfrumU. (2007). Protein networks and complexes in photoreceptor cilia. Subcell. Biochem.43, 209–235. 10.1007/978-1-4020-5943-8_1017953396SchönC.BielM.MichalakisS. (2013). Gene replacement therapy for retinal CNG channelopathies. Mol. Genet. Genomics288, 459–467. 10.1007/s00438-013-0766-423861024ShaltielL.PaparizosC.FenskeS.HassanS.GrunerC.RotzerK.. (2012). Complex regulation of voltage-dependent activation and inactivation properties of retinal voltage-gated Cav1.4 L-type Ca2+ channels by Ca2+-binding protein 4 (CaBP4). J. Biol. Chem.287, 36312–36321. 10.1074/jbc.M112.39281122936811TrapaniI.PuppoA.AuricchioA. (2014). Vector platforms for gene therapy of inherited retinopathies. Prog. Retin. Eye Res.43C, 108–128. 10.1016/j.preteyeres.2014.08.001WaldoG. S.StandishB. M.BerendzenJ.TerwilligerT. C. (1999). Rapid protein-folding assay using green fluorescent protein. Nat. Biotechnol.17, 691–695. 10.1038/1090410404163WenL.ThunemannM.FeilS.HillenbrandM.VachaviolosA.OttT.. (2013). Analysis of cGMP signalling with transgenic mice expressing FRET-based cGMP sensors. BMC Pharmacol. Toxicol.14, 1–2. 10.1186/2050-6511-14-s1-p76ZacchignaS.ZentilinL.GiaccaM. (2014). Adeno-associated virus vectors as therapeutic and investigational tools in the cardiovascular system. Circ. Res. 114, 1827–1846. 10.1161/CIRCRESAHA.114.30233124855205