Transformation and Overexpression of Primary Cell Wall Synthesis-Related Zinc Finger Gene Gh_A07G1537 to Improve Fiber Length in Cotton

Molecular interventions have helped to explore the genes involved in fiber length, fiber strength, and other quality parameters with improved characteristics, particularly in cotton. The current study is an extension and functional validation of previous findings that Gh_A07G1537 influences fiber length in cotton using a chromosomal segment substitution line MBI7747 through RNA-seq data. The recombinant Gh_A07G1537 derived from the MBI7747 line was over-expressed in CCRI24, a genotype with a low profile of fiber quality parameters. Putative transformants were selected on MS medium containing hygromycin (25mg/ml), acclimatized, and shifted to a greenhouse for further growth and proliferation. Transgene integration was validated through PCR and Southern Blot analysis. Stable integration of the transgene (ΔGh_A07G1537) was validated by tracking its expression in different generations (T0, T1, and T2) of transformed cotton plants. It was found to be 2.97-, 2.86-, and 2.92-folds higher expression in T0, T1, and T2 plants, respectively, of transgenic compared with non-transgenic cotton plants. Fiber quality parameters were also observed to be improved in the engineered cotton line. Genetic modifications of Gh_A07G1537 support the improvement in fiber quality parameters and should be appreciated for the textile industry.

Molecular interventions have helped to explore the genes involved in fiber length, fiber strength, and other quality parameters with improved characteristics, particularly in cotton. The current study is an extension and functional validation of previous findings that Gh_A07G1537 influences fiber length in cotton using a chromosomal segment substitution line MBI7747 through RNA-seq data. The recombinant Gh_A07G1537 derived from the MBI7747 line was over-expressed in CCRI24, a genotype with a low profile of fiber quality parameters. Putative transformants were selected on MS medium containing hygromycin (25 mg/ml), acclimatized, and shifted to a greenhouse for further growth and proliferation. Transgene integration was validated through PCR and Southern Blot analysis. Stable integration of the transgene (ΔGh_A07G1537) was validated by tracking its expression in different generations (T 0 , T 1 , and T 2 ) of transformed cotton plants. It was found to be 2.97-, 2.86-, and 2.92-folds higher expression in T 0 , T 1 , and T 2 plants, respectively, of transgenic compared with non-transgenic cotton plants. Fiber quality parameters were also observed to be improved in the engineered cotton line. Genetic modifications of Gh_A07G1537 support the improvement in fiber quality parameters and should be appreciated for the textile industry.

INTRODUCTION
Cotton is one of the most important sources of natural cellulose in the world. The cotton boll protects seeds and delicate fibers (Von Mark and Dierig, 2014). This crop provides an excellent system for studying polyploidization and cell elongation (Wang et al., 2019) with more than 50 species which are further divided into eight diploid genomic groups (A-G, and K) November 2021 | Volume 12 | Article 777794 and one tetraploid genomic group (AD; Wu et al., 2018). The growth of the textile industry is solely dependent on cotton crop production in more than 55 countries all over the globe (Kanat et al., 2018).
Zinc finger protein (ZFP) is one of the most significant and large families in plants which is characterized by the zinc finger motifs (Znf). The ZFPs are classified into 14 gene families, among which RING finger, LIM, DOF, AP2/EREBP, and WRKY have been reported to play a vital role in plant growth and development (Liu and Zhang, 2017). The ZFPs are categorized into 10 groups (C2H2, C2HC, C2HC5, C2C2, C3H, C3HC4, C4, C4HC3, C6, and C8) based on the number of cysteine and histidine residues and amino acids (Moore and Ullman, 2003). The cysteines and/or histidines coordinate with zinc ions to form a peptide structure (Hall, 2005). They have been involved in core biological processes like morphogenesis, signal transduction, development, and survival under environmental stresses (Stege et al., 2002). Among ZFPs, Cysteine3 Histidine (C3H) consists of three cysteines and one histidine coordinated by a zinc cation, which is reported as DNA/RNA binding proteins (Wang et al., 2008). Furthermore, CCCH genes play a vital role in hormone-regulated stress responses and cell fate determination. The Znf-CCCH has been reported to be involved in various developmental processes and adaptation under stress conditions. For example, AtPEI1 of the CCCH gene in Arabidopsis is essential for heart-stage embryo formation (Li and Thomas, 1998). Overexpression of the CCCH gene, OsDOS, caused a delay in leaf senescence in rice by affecting the jasmonic acid pathway (Kong et al., 2006). Similarly, overexpression of the CCCH gene (GhZFP1) in cotton resulted in enhanced salt tolerance and disease resistance (Guo et al., 2009). Hence, numerous studies confirm the involvement of ZFPs in the fiber quality of cotton.
Many factors influence the cotton fiber quality (Xiao et al., 2019) and several efforts have been made to improve its quality and yield (Ahmed et al., 2018a). The cotton fiber is an epidermal single-cell extension, which consists of four overlapping and sequential stages of differentiation: initiation, elongation, secondary wall synthesis, and maturation (Ahmed et al., 2018a). Its development is controlled by numerous genes, transcription factors, and phytohormones (Xiao et al., 2019). The qualitative and quantitative traits of the cotton fiber are significantly regulated by the genes involved in cell wall synthesis and extension (Guo et al., 2016). Several genes and transcription factors for expansin (Bajwa et al., 2015), cellulose synthase (Arioli et al., 1998), sucrose synthase (Ahmed et al., 2020), and actin have been transformed successfully into cotton for the improvement of fiber quality and yield (Ahmed et al., 2018a).
The molecular mechanisms involved in ovule epidermal cell development may help to explore cotton fiber quality parameters (Pu et al., 2008) which can potentially have an impact on fiber length, fiber strength, micronaire value, and maturity (Seagull et al., 2000). The molecular genetics of the genes and their isoforms provide a better understanding of their function at specific fiber developmental stages (Manik and Ravikesavan, 2009). Several differentially expressed genes are required at different fiber development stages . However, fewer of the genes regulate the biosynthesis of fiber-specific structural proteins, enzymes, waxes, and polysaccharides (Li et al., 2002) to improve the cotton fiber quality (Rapp et al., 2010).
Chromosome segment substitution lines (CSSLs) are permanent populations possessing the same genetic background as a recurrent parent with a difference of one or few introgressed chromosomal segments. It effectively eliminates the interference of the genetic background, of which permanent populations are also used to determine the QTLs with minor effects. Therefore, CSSLs are considered to be the ideal material for QTL fine mapping, investigation of QTL interaction, and gene cloning. Since the construction of CSSLs by Eshed and Zamir (1994), these have successfully been applied in rice, corn, and other plants (Liu et al., 2015). However, there was a low frequency of the CSSLs conducted in cotton for QTL studies. It has been reported that 17 CSSLs of Sea iceland cotton (Gossypium barbadense) in TM-1 background of Gossypium hirsutum were constructed (Stelly et al., 2005). Furthermore, it was reported by the same research group that sea island cotton has a significant contribution to fiber quality traits influenced by multiple genes (Zhang et al., 2014).
At our ICR-CAAS, three CSSLs (MBI7561, MBI7285, and MBI7747) were developed from CCRI45 (G. hirsutum) and Hai1 (G. barbadense) using the conventional breeding methods and modern molecular marker techniques (Shi et al., 2015), which subsequently were subjected to transcriptome sequencing together with their parents. Several differentially expressed genes (DEGs) responsible for fiber length were identified and suggested for further functional studies in Arabidopsis and subsequently in cotton (Li et al., 2021). The current study is a continuation of the aforementioned hypothesis, suggesting that the differentially expressed gene (Gh_A07G1537) is located on chromosome 7 and it belongs to the CCC-H zinc finger gene superfamily which regulates the primary cell wall synthesis. Hence, overexpression of the afore-mentioned gene has a great potential to improve fiber length in cotton.

Collection of Material
The cotton bolls of CCRI45, Hai1, and MBI7747 at 20 DPA were collected from the field of ICR-CAAS and brought to the laboratory in liquid nitrogen. The fiber was extracted from the collected cotton bolls and stored at −80°C.

Isolation of RNA and cDNA Synthesis
The total RNAs of all three materials (CCRI45, Hai1, and MBI7747) were extracted from the cotton fiber of 20 DPA using the RNAprep pure plant kit (Tiangen, Beijing, China) method. The genomic DNA contaminations were removed by DNase1. The quantity and integrity of isolated RNA were measured by Nano-Drop 2000 spectrophotometer (Thermo-Scientific, United States) and visualized on a 1% agarose gel electrophoresis. The quantified RNA of the materials was subjected to prepare cDNA transcript in a reaction volume

Detection of Gh_A07G1537 Gene in CCRI45, Hai1, and MBI7747
A gene was amplified from the cDNA template with optimal PCR conditions; initial denaturation temperature was 95°C for 3 min, denaturation 95°C for 45 s, annealing at 65.4°C for 45 s, extension 72°C for 2 min and final extension was 72°C for 10 min. The total reaction volume was prepared in 25 μl; cDNA template 1 μl, F-primers 1 μl, R-reverse primer 1 μl, master mix Hi-Fi 12.5 μl and water 9.5 μl. An agarose gel of 1% was used in a freshly prepared 1X TAE buffer to visualize the bands of PCR products (see Figure 1). The gene-specific primer sequences; Forward primer sequence: 5'CCATGGATGCCT GATAATCGGCAAGTTCAGAAC3' and Reverse primer sequence: 5'AGATCTTCAATCATCATGTGAGGTTTTCGAAGA ACCC 3' were used for PCR detection.

Cloning and Sequencing of the Positive Clones
A 4 μl PCR purified product and 1 μl blunt zero cloning vector (TOPO TA cloning, cat#45-0641, Invitrogen) were taken and incubated at 27°C for 10 min using a thermal cycler. A reaction volume of 5 μl was transferred into a 1.5 ml Eppendorf tube containing 50 μl competent cells. The Eppendorf tube was then incubated in ice for 30 min. The tube was taken out and exposed to heat shock for 1 min at 42°C using a water bath. Then the tube was immediately removed and put back into the ice for a quick chill for 2-3 min. An aliquot (450 μl) of LB (tryptone 10 g/L, yeast 5 g/L, NaCl 5 g/L) was added to the tube and incubated on a shaker at 37°C for 55 min with 200 rpm. Then a 25-100 μl of the cells in LB were spread over the Kanamycin (50 mg/L) plates and incubated at 37°C for at least 12 h or overnight. After overnight incubation, discrete colonies of each material (CCRI45, Hai1, MBI7747) were picked up into 5 ml of the LB medium containing Kanamycin (50 mg/L) and incubated at 37°C for overnight for PCR amplification. The plasmids of positive clones were isolated using a plasmid isolation kit (Thermo-Scientific, Cat#K0503). The positives plasmids were sequenced (Sangon biotech Shanghai, China) and analyzed using the DNAMAN software version 9 (see Figure 2).

Ligation and Transformation of the Gene Into Agrobacterium tumefaciens
The plasmid of the positive clone and plant expression vector PCAMBIA2300 were digested with the restriction enzymes BglII and NcoI and incubated at 37°C for 2 h. The purified products were then ligated using a fast ligation kit (Thermo-Scientific, K1423.) at 22°C for 15 min. The ligated products were then run on the 1% agarose gel electrophoresis (see Figure 3). An aliquot of 5 μl of the purified product was transferred into 50 μl competent cells of Agrobacterium tumefaciens LBA4404 through the liquid nitrogen method. A volume of 450 μl of YEP (peptone 10 g/L, yeast extract 10 g/L, NaCl 5 g/L) was added to each tube and incubated on a shaker at 28°C for 48 h at 200 rpm. A 25-100 μl of the cells in YEP were spread over the plates containing Kanamycin (50 mg/L) and rifampicin (50 mg/L) and incubated at 28°C for 48 h.

Confirmation of Gene Constructs in A. tumefaciens Through PCR
The discrete and isolated colonies of A. tumefaciens that appeared on the YEP plates were picked and cultured in 5 ml of the YEP medium and incubated at 28°C for 48 h. A volume of 100 μl of the culture was centrifuged at 14,000 rpm for 10 min. The supernatant was discarded and resuspended in the pellet in 50 μl of 1X TE buffer. The suspension was shifted to PCR tubes and incubated at 98°C for 12 min. The tubes were slightly spun and a volume of 5 μl of the clear supernatant was taken as a PCR template. The gene in A. tumefaciens was detected with full-length primers using PCR conditions; initial denaturation temperature was 95°C for 3 min, denaturation 95°C for 45 s, annealing 65.4°C for 45 s, extension 72°C for 2 min and final extension at 72°C for 10 min, whereas detection through short length primers using PCR conditions was done at the following conditions; initial denaturation temperature was 95°C for 3 min, denaturation 95°C for 45 s, annealing 60°C for 45 s, extension at 72°C for 2 min and final extension at 72°C for 10 min. The total reaction volume was prepared in 25 μl; cDNA template 1 μl, F-primers 1 μl, R-reverse primer 1 μl, master mix Hi-Fi 12.5 μl and water 9.5 μl (see Figures 4, 5).

Transformation of the Gene Into Cotton
The seeds of CCRI24 were delinted, surface-sterilized, and soaked at 30°C for 48 h. The germinated seedlings were used for transformation using the shoot apex cut method (Ulian et al., 1988). The embryos, after injury, were inoculated with the selected transformant A. tumefaciens strains harboring the gene construct in the MS medium (4.4 g/L, sucrose 30 g/L, phytagel 2.4 g/L) cultured for 1 h at 28°C. The embryos were allowed to grow on the MS medium plates supplemented with cefotaxime (100 mg/L) followed by screening in MS tubes supplemented with hygromycin (25 mg/ml) for 6 weeks. After screening, the cotton plants from the tubes were transplanted into pots containing an equal proportion of clay, peat moss, and sand (1:1:1). Subsequently, the putative transgenic cotton plants were transplanted in the greenhouse of Four Brothers Genetics Inc. for acclimatization and hardening followed by molecular analysis (see Tables 1-3 and Figure 6).

Detection of the Gene in Putative Transgene Cotton Through PCR
The leaves of the putative transgenic cotton were taken for the confirmation of the gene (Gh_A07G1537), through PCR using the manufacturer protocol Green Plant direct PCR master mix kit, (Thermo-Scientific) using gene-specific short length primers; Forward primers 5' TTCTGCTGGTATTCTCGGATCG 3': Reverse primers 5' TGGGTTGATCAGGTCTTTCAGG 3' (see Figure 7).

Detection of Stable Integration of a Gene in Putative Cotton
The presence of a gene was confirmed through Southern blot analysis. The DNA of confirmed transgenic cotton was used to perform it. The extracted DNA was digested with EcoRI and a gene-specific probe was used for the detection of a gene (see Figure 8).

RNA Extraction and cDNA Preparation
Primer pairs of Gh_A07G1537 gene were designed using Primer3 Input Version 4.0. The RNA from the putative transgenic cotton   was isolated from leaves using the Agilent kit (Agilent Technologies, Santa Clara, United States). The RNA was quantified in ng/μl using Nano-Drop 2000 spectrophotometer (Thermo-Scientific, United States) at 260 and 280 nm. The DNase-treated total RNA was used to prepare cDNA using PrimeScript ® RT Reagent Kit (Perfect Real Time, Takara Biotechnology Co., Ltd., Dalian, China) and cDNA was stored at −20°C.

Expression Analysis of Cotton Transgene
The expression analysis of transgene cotton was performed by qRT-PCR using specific primers in triplicates with a product size of 128 bp following the protocol of Maxima SYBR Green/ ROX (Thermo-Scientific). The reaction mixture was prepared in a total of 20 μl with the following components of 1 μl of 10 pmol of forward and reverse primers, 5 μl of Maxima ® SYBR Green/ROX qPCR Master Mix (2x) and 1 μl (50 ng/μl) of cDNA. The relative expression was determined and GAPDH primers were used as an internal control for normalization. All of the assays were performed in triplicate (see Figure 9).

Analysis of Fiber Quality Parameters
The careful examination of the expression of the gene in transgenic cotton revealed that the quality parameters such as fiber strength and length were of great interest. Fiber samples from the transgenic and non-transgenic cotton were collected and sent to the Central Cotton Research Institute (CCRI), Multan-Pakistan for the analysis of fiber quality parameters. The data were collected and evaluated for fiber quality parameters (see Figure 10).

Isolation of Endogenous Gh_A07G1537 Gene From Indigenous Cotton
The cotton bolls of the three cotton genotypes (CCRI45, Hai1, and MBI7747) at 20 DPA, were collected from the field and total mRNA was isolated for cDNA synthesis. The quality and integrity of the mRNA were checked using the Nano-Drop 2000 spectrophotometer (Thermo-Scientific, United States). The genespecific primer sequences with forwarding primer sequence: 5'CCATGGATGCCTGATAATCGGCAAGTTCAGAAC 3' and reverse primer sequence: 5'AGATCTTCAATCATCATGTGA GGTTTTCGAAGAACCC 3' successfully amplified a fragment of 1,314 bp (Figure 1).

Cloning and Sequence Analysis of the Isolated Gh_A07G1537 Gene
A PCR purified product and blunt zero cloning vector were taken and cloned in Escherichia coli competent cells. Plasmid DNA was isolated from the positive clones and was sequence characterized. The retrieved sequences were compared with the parents, to seek homology. It was found that the gene (Gh_A07G1537) isolated from the introgressed line was different in a few SNPs and Indel sequence of 55 bp as compared with the gene sequences retrieved for its parent (Figure 2).

Genetic Transformation of Cotton With ΔGh_A07G1537
The seeds of the CCRI24 cotton variety were de-linted, surface sterilized, and soaked at 30°C for 48 h. The germinated seedlings were used for the transformation of the ΔGh_A07G1537 gene using the shoot apex cut method. After initial selection and screening, total cellular DNA was isolated from the leaves of the putative cotton transformants (Figure 6). The isolated DNA was subjected to PCR to track transgene integration using gene-specific short-length primers. Amplification of a fragment of 128 bp confirmed integration of ΔGh_A07G1537 into the cotton genome (Figure 7).

Detection of Stable Integration of the Transgene Into the Cotton Genome
The presence of the transgene was also confirmed through the Southern Blot Analysis. The DNA of three confirmed transgenic cotton plants was extracted and digested with EcoRI, and a gene-specific probe was used for the detection of the transgene (ΔGh_A07G1537) representing the size of 1,314 bp. Blot analysis revealed that two copies of transgene were integrated into the host genome (lanes 1-3; Figure 8).

Tracking Expression of the Transgene ΔGh_A07G1537 in Different Generations of Putative Transformants of Cotton
The expression analysis of three transgenic cotton plants was performed by qRT-PCR (Thermo-Scientific, United States) using gene-specific primers in triplicates following the protocol of Maxima SYBR Green/ROX (Thermo-Scientific, United States). The GAPDH gene was used as an internal control for the normalization of the reaction. The quantitative expression analysis was performed in T0, T1, and T2 plants of the putative transformants. The variations in the relative expression of the ΔGh_A07G1537 gene were observed in the three generations (Figure 9). The expression of the transgene (ΔGh_A07G1537) was found to be 2.97-, 2.86-, and 2.92-folds higher in T0, T1, and T2 plants of transformed, respectively, as compared with that of the non-transgenic cotton plants.

Analysis of Fiber Quality Parameters
After validation, integration, and overexpression of the transgene, fiber quality was also assessed of the transgenic cotton plants. Fiber samples were collected from transgenic and non-transgenic cotton and analyzed for various fiber quality parameters. Data analyses revealed that fiber quality parameters were improved in the cotton plants engineered with the ΔGh_A07G1537 gene. Fiber length was found to be improved by 4.4% (31.5 mm), fiber strength 3.0% (33.2 g/ tex), uniformity index 4.2% and micronaire value by 6.9%. Hence, overall parameters of fiber quality were improved in the transgenic cotton plants as compared with those of the non-transgenic plants. However, boll weight was found to be reduced by 12% (see Figure 10).

DISCUSSION
Cotton is one of the most important and integrated economic crops worldwide that produces high-quality natural fiber, which is being exploited by traditional breeding and molecular genomics methods for improved fiber quality and yield. Molecular approaches are more reliable and sophisticated than traditional breeding to get the desired characteristics of fiber quality and yield (Wilkins and Arpat, 2005). The improvement in cotton fiber quality through genetic modifications is a marked economic development in a short time (Ahmed et al., 2018b). Agrobacterium-mediated transformation directly correlates with improvement in crop characteristics (Zhang, 2013). Therefore, the current study was performed with Agrobacteriummediated transformation.
Different plant expression vectors are used for plant transformation under efficient promoters. Promoter is a specified Segment of DNA that initiates a transcription of a specific gene (Yaqoob et al., 2020). Promoters are selected or designed based on the expression of the required gene. Some of the promoters are constitutive whereas others are tissue specific. CaMV35S is most commonly used as constitutive promoter that expresses in all parts of the plant at different development stages. This promoter is used to study the transient and stable expression of the gene. For example, CaMV35S promoter is widely adopted and reported efficient transformation of foreign gene into the cotton plant. In a recent study of sucrose synthase (SuS) gene transformation in cotton, CaMV35S promoter is used and resulted in significant improvement in fiber quality (Ahmed et al., 2020). This has been proved through various studies that revealed the relative expression of the tissue specific and constitutive promoters. The level of expression of the gene in cotton plant indicates the difference between constitutive and tissue specific promoter (Yaqoob et al., 2020). The introduction of gene for overexpression in cotton using CaMV35S promoter causes visible differences in plant phenotypes such as plant height, boll number, boll weight, fiber strength and length .
The current study is the continuity of the previous study conducted at The Institute of Cotton Research-CAAS, Anyang, Henan, China. Different CSSLs such as MBI7561, MBI7285, and MBI7747 were developed. The transcriptome and RNA-seq analysis revealed some potential genes involved in the development of fiber length at 20 DPA. It was identified that the gene Gh_A07G1537 belongs to the ZFPs family and directly correlates with the primary wall biosynthesis (Li et al., 2021) and thus brought under experimentation for further functional validation.
In this proposed study, the potential gene Gh_A07G1537 was isolated and amplified from the material MBI7747 and transformed into cotton variety CCRI24 through Agrobacteriummediated transformation. Before its transformation, the gene was cloned for sequence analysis to compare the genotypic difference among MBI7747, CCRI45, and Hai1. It was found that MBI7747 showed an SNP and a complete Indel of 55 bp than its parents CCRI45 and Hai1. This finding strengthens the previous hypothesis that this gene might contribute a significant addition to the improvement of fiber length just like other transgenes such as expansin (Bajwa et al., 2015), cellulose synthase (Arioli et al., 1998), sucrose synthase (Ahmed et al., 2020), and actin (Ahmed et al., 2018a).
The southern blot analysis and copy number were performed to confirm the integration of the gene (Gh_ A07G1537) into the transgenic plants. Transgenic plants were integrated with two copy numbers and non-transgenic plants were integrated with a single copy number into their genome (see Figure 8). It was found that the expression level of the transgenic plants with two copy numbers was higher than that in the non-transgenic plants with a single copy number. The higher expression of the gene may be due to copy number in transgenic plants, gene positional effects, gene insertion effects, internal cell programming, and environmental factors (Southern, 1975). Similar results were reported by Cantsilieris et al. (2013).
Furthermore, the quantitative expression analysis was performed through the qRT-PCR for the differential expression of the gene. The Quantitative Real-time PCR for the analysis of transgenic and non-transgenic plants was performed which revealed a significant differential expression of the gene. The leaves of the three transgenic plant generations (T 0 , T 1 , and T 2 ) each from the same cotton variety CCRI24 was taken and the variations in the relative expression of the gene in three transgenic plant generations were observed (see Figure 9). It was found that the relative overexpression of T 0 , T 1 , and T 2 was 2.97-, 2.86-, and 2.92-folds higher than that of the non-transgenic plants. Similar results for cotton fiber quality improvement were presented by Yang et al. (2009), Corrêa et al. (2010, and . The overall difference of expression among the three generations was very low that may have been due to environmental stresses or human handling. However, it indicates stable transgene integration into the host genome. A careful examination of the cotton fiber samples from the transgenic and non-transgenic cotton lines showed that in the transgenic plants, fiber length was improved by 4.4% (31.5 mm), fiber strength 3.0% (33.2 g/tex), uniformity index 4.2%, and micronaire value 2.4% compared to those in the non-transgenic plants, whereas boll weight was reduced to 12%. Interestingly, the same cotton variety was cultivated in Anyang, China and it showed fewer promising results. Comparing with the results of non-transgenic CCRI24 cultivated in China and Pakistan, the cotton fiber quality parameters observed in Pakistan were even considerable than recorded in China.
Henceforth, the results of the current study revealed that overexpression of the ΔGh_A07G1537 gene contributed significantly to the improvement of fiber length in cotton. Hence, overexpression of ΔGh_A07G1537 may pave the way to the development of future cotton crops with improved and desired fiber quality.
Furthermore, we anticipate that the learnings gained from this study would be valuable in the future to exploit the gene ΔGh_A07G1537 through gene-editing technology for the improvement of fiber quality.

CONCLUSION
The present study revealed that overexpression of the ΔGh_ A07G1537 gene in cotton has led to improved fiber quality parameters. The molecular analysis showed that the expression of the gene in transgenic plants was higher than that in non-transgenic plants. Further, the expression of the transgene in T 0 , T 1 , and T 2 generations indicated its stable integration into the host genome. This overexpression of the genes ultimately resulted in the improvement of fiber length, since a significant increase in the fiber length and fiber strength may be of great value for the textile industry.

DATA AVAILABILITY STATEMENT
The original contributions presented in the study are included in the article/supplementary material, further inquiries can be directed to the corresponding authors.

AUTHOR CONTRIBUTIONS
AR wrote the initial draft of the manuscript. MZ, AH, GQ, and XD made all necessary corrections and carried out final editing of the manuscript. PL and YS provided the material. AA provided the lab space. AL provided technical support. MR, HS, and WG proofread the manuscript. Final approval for publication was given by the group leader at The Institute of Cotton Research. All authors contributed to the article and approved the submitted version.