<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing DTD v2.3 20070202//EN" "journalpublishing.dtd">
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" article-type="research-article">
<front>
<journal-meta>
<journal-id journal-id-type="publisher-id">Front. Bioeng. Biotechnol.</journal-id>
<journal-title>Frontiers in Bioengineering and Biotechnology</journal-title>
<abbrev-journal-title abbrev-type="pubmed">Front. Bioeng. Biotechnol.</abbrev-journal-title>
<issn pub-type="epub">2296-4185</issn>
<publisher>
<publisher-name>Frontiers Media S.A.</publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id pub-id-type="doi">10.3389/fbioe.2020.588729</article-id>
<article-categories>
<subj-group subj-group-type="heading">
<subject>Bioengineering and Biotechnology</subject>
<subj-group>
<subject>Original Research</subject>
</subj-group>
</subj-group>
</article-categories>
<title-group>
<article-title>The Impact of Glass Material on Growth and Biocatalytic Performance of Mixed-Species Biofilms in Capillary Reactors for Continuous Cyclohexanol Production</article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name><surname>Heuschkel</surname> <given-names>Ingeborg</given-names></name>
</contrib>
<contrib contrib-type="author">
<name><surname>Dagini</surname> <given-names>Rakesh</given-names></name>
</contrib>
<contrib contrib-type="author" corresp="yes">
<name><surname>Karande</surname> <given-names>Rohan</given-names></name>
<xref ref-type="corresp" rid="c001"><sup>&#x002A;</sup></xref>
<uri xlink:href="http://loop.frontiersin.org/people/913114/overview"/>
</contrib>
<contrib contrib-type="author">
<name><surname>B&#x00FC;hler</surname> <given-names>Katja</given-names></name>
<uri xlink:href="http://loop.frontiersin.org/people/1069649/overview"/>
</contrib>
</contrib-group>
<aff><institution>Department of Solar Materials, Helmholtz-Centre for Environmental Research</institution>, <addr-line>Leipzig</addr-line>, <country>Germany</country></aff>
<author-notes>
<fn fn-type="edited-by"><p>Edited by: Christoph Slouka, Vienna University of Technology, Austria</p></fn>
<fn fn-type="edited-by"><p>Reviewed by: Harald Horn, Karlsruhe Institute of Technology (KIT), Germany; Cormac Murphy, University College Dublin, Ireland</p></fn>
<corresp id="c001">&#x002A;Correspondence: Rohan Karande, <email>rohan.karande@ufz.de</email></corresp>
<fn fn-type="other" id="fn004"><p>This article was submitted to Bioprocess Engineering, a section of the journal Frontiers in Bioengineering and Biotechnology</p></fn>
</author-notes>
<pub-date pub-type="epub">
<day>15</day>
<month>09</month>
<year>2020</year>
</pub-date>
<pub-date pub-type="collection">
<year>2020</year>
</pub-date>
<volume>8</volume>
<elocation-id>588729</elocation-id>
<history>
<date date-type="received">
<day>29</day>
<month>07</month>
<year>2020</year>
</date>
<date date-type="accepted">
<day>25</day>
<month>08</month>
<year>2020</year>
</date>
</history>
<permissions>
<copyright-statement>Copyright &#x00A9; 2020 Heuschkel, Dagini, Karande and B&#x00FC;hler.</copyright-statement>
<copyright-year>2020</copyright-year>
<copyright-holder>Heuschkel, Dagini, Karande and B&#x00FC;hler</copyright-holder>
<license xlink:href="http://creativecommons.org/licenses/by/4.0/"><p>This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.</p></license>
</permissions>
<abstract>
<p>In this study, the growth and catalytic performance of mixed-species biofilms consisting of photoautotrophic <italic>Synechocystis</italic> sp. PCC 6803 and chemoheterotrophic <italic>Pseudomonas</italic> sp. VLB120 was investigated. Both strains contained a cytochrome P450 monooxygenase enzyme system catalyzing the oxyfunctionalization of cyclohexane to cyclohexanol. Biofilm cultivation was performed in capillary glass reactors made of either, borosilicate glass (Duran) or quartz glass, in different flow regimes. Consequently, four phases could be distinguished for mixed-species biofilm growth and development in the glass-capillaries. The first phase represents the limited growth of mixed-species biofilm in the single-phase flow condition. The second phase includes a rapid increase in biofilm spatial coverage after the start of air-segments. The third phase starts with the sloughing of large biofilm patches from well-grown biofilms, and the final stage consists of biofilm regrowth and the expansion of the spatial coverage. The catalytic performance of the mixed-species biofilm after the detachment process was compared to a well-grown biofilm. With an increase in the biofilm surface coverage, the cyclohexanol production rate improved from 1.75 to 6.4 g m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup>, resulting in comparable production rates to the well-grown biofilms. In summary, high productivities can be reached for biofilms cultivated in glass capillaries, but stable product formation was disturbed by sloughing events.</p>
</abstract>
<kwd-group>
<kwd>cytochrome P450 monooxygenase</kwd>
<kwd>pseudomonas</kwd>
<kwd>synechocystis</kwd>
<kwd>biotransformation</kwd>
<kwd>cyclohexane oxidation</kwd>
<kwd>phototrophic biofilm</kwd>
<kwd>continuous photobioreactor</kwd>
</kwd-group>
<counts>
<fig-count count="4"/>
<table-count count="2"/>
<equation-count count="0"/>
<ref-count count="59"/>
<page-count count="10"/>
<word-count count="0"/>
</counts>
</article-meta>
</front>
<body>
<sec id="S1">
<title>Introduction</title>
<p>The ability of the microbial photosynthetic machinery to convert solar radiation into chemical energy for fixing carbon dioxide into value-added chemicals has attracted academic and industrial attention for several decades (<xref ref-type="bibr" rid="B4">B&#x00F6;hmer et al., 2017</xref>; <xref ref-type="bibr" rid="B31">Mellor et al., 2017</xref>). Such photo-bioprocesses are currently confined to the production of niche market products, including astaxanthin and &#x03B2;-carotene, with product prices within the range of 100&#x2013;1,000 &#x20AC;/kg (<xref ref-type="bibr" rid="B41">Pulz and Gross, 2004</xref>; <xref ref-type="bibr" rid="B49">Spolaore et al., 2006</xref>; <xref ref-type="bibr" rid="B39">Posten, 2009</xref>; <xref ref-type="bibr" rid="B11">Fernandes et al., 2015</xref>; <xref ref-type="bibr" rid="B12">Fern&#x00E1;ndez et al., 2019</xref>). The rapid progress in metabolic engineering and synthetic biology tools have broadened the available product spectrum to exploit cyanobacteria as cell factories (<xref ref-type="bibr" rid="B1">Angermayr et al., 2015</xref>; <xref ref-type="bibr" rid="B16">Hays and Ducat, 2015</xref>; <xref ref-type="bibr" rid="B10">Erb and Zarzycki, 2016</xref>; <xref ref-type="bibr" rid="B14">Gao et al., 2016</xref>; <xref ref-type="bibr" rid="B34">Nore&#x00F1;a-Caro and Benton, 2018</xref>; <xref ref-type="bibr" rid="B53">Sun et al., 2018</xref>; <xref ref-type="bibr" rid="B46">Santos-Merino et al., 2019</xref>; <xref ref-type="bibr" rid="B33">Mukherjee et al., 2020</xref>). However, product titers and volumetric productivities obtained in these proof of concept studies have been very low compared to processes based on heterotrophic hosts such as <italic>E. coli</italic> or <italic>Pseudomonas</italic> (<xref ref-type="bibr" rid="B30">Liang et al., 2018</xref>; <xref ref-type="bibr" rid="B46">Santos-Merino et al., 2019</xref>).</p>
<p>Some of these challenges could be circumvented by the cultivation of phototrophic organisms in a biofilm format, where cells are naturally immobilized in a self-produced extracellular polymeric matrix. Biofilms, in comparison to suspended cells, allow long retention times for slow-growing phototrophic organisms (<xref ref-type="bibr" rid="B9">Elenter et al., 2007</xref>), high tolerance toward toxic chemicals (<xref ref-type="bibr" rid="B43">Rosche et al., 2009</xref>; <xref ref-type="bibr" rid="B15">Halan et al., 2016</xref>), and generate high cell density (<xref ref-type="bibr" rid="B7">Chang et al., 2014</xref>; <xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>), resulting in a compact reactor design and continuous operation with high volumetric productivities. In this context, a mixed-species biofilm concept, constituting phototrophic <italic>Synechocystis</italic> sp. PCC 6803 and heterotrophic <italic>Pseudomonas</italic> sp. VLB120 was established in a capillary reactor made from polystyrene (<xref ref-type="bibr" rid="B24">Karande et al., 2018</xref>; <xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>). This phototrophic biofilm reactor concept reported high cell densities up to 51.8 g<sub>BDW</sub> L<sup>&#x2013;1</sup>. It was successfully used for converting cyclohexane to the corresponding alcohol and resulted in 98% substrate conversion and a stable product flux of 3.76 g m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> for one month.</p>
<p>For the continuous production of chemicals on a technical scale by using phototrophic biofilms, crucial factors are to obtain high and stable volumetric productivities. Additionally, the scale-up of the phototrophic capillary biofilm reactor system based on the numbering-up concept or by using glass monoliths needs to be validated (<xref ref-type="bibr" rid="B8">Ebrahimi et al., 2005</xref>; <xref ref-type="bibr" rid="B26">Kreutzer et al., 2005a,b</xref>, <xref ref-type="bibr" rid="B28">2006</xref>). One major issue in this respect is the material used for the capillary biofilm reactor. In the above mentioned capillary reactor, polystyrene was used as a cheap and easy to handle material. However, it is subjected to rapid yellowing and embrittlement under UV light, limiting long-term outdoor applications (<xref ref-type="bibr" rid="B59">Yousif and Haddad, 2013</xref>). Additionally, this material is susceptible to deformation in the presence of organic solvents (<xref ref-type="bibr" rid="B57">Whelan and Whelan, 1994</xref>). Commercial photobioreactors mostly consist of glass due to its high chemical stability, non-solarizing effects during UV-light exposure, resistance to temperature variations, and exceptionally long service life up to 20 years (<xref ref-type="bibr" rid="B6">Burgess et al., 2007</xref>). In this work, we aim to evaluate glass as a possible material for capillary reactors and study its impact on mixed-species biofilm development and catalytic performance.</p>
<p>For continuous operation and stable volumetric productivities, biofilm growth and detachment need to be balanced to acquire a defined amount of active biomass within the reactors (<xref ref-type="bibr" rid="B9">Elenter et al., 2007</xref>; <xref ref-type="bibr" rid="B44">Rumbaugh and Sauer, 2020</xref>). Conversely, significant biofilm detachment events, termed as sloughing, could severely affect biofilm catalytic performance (<xref ref-type="bibr" rid="B32">Morgenroth and Wilderer, 2000</xref>; <xref ref-type="bibr" rid="B55">Telgmann et al., 2004</xref>). What fraction of mixed-species biofilm detaches in capillary reactors and how these affect the overall performance of a continuous system is not well understood. The objectives of the current work were (i) to evaluate mixed-species biofilm growth in glass capillaries under single-phase flow and segmented flow conditions (ii) to assess mixed-species biofilm stability based on the detachment process and (iii) to investigate the influence of detachment on the catalytic performance. Two glass materials, quartz and borosilicate glass were selected to study mixed-species biofilm development. The biofilm consisted of a phototrophic <italic>Synechocystis</italic> sp. PCC 6803 and a heterotrophic <italic>Pseudomonas</italic> sp. VLB120, both organisms are harboring a cytochrome P450 monooxygenase for cyclohexanol production from cyclohexane. The average cyclohexanol (CHOL) production rates of 4.72 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> and 4.08 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> could be reached for biofilms grown in quartz and borosilicate capillaries. Nevertheless, the overall biocatalytic performance for mixed-species biofilms in both glass capillaries was influenced by detachment events.</p>
</sec>
<sec id="S2" sec-type="materials|methods">
<title>Materials and Methods</title>
<sec id="S2.SS1">
<title>Chemicals</title>
<p>All Chemicals used for medium preparation were purchased from Carl-Roth GmbH (Karlsruhe, Germany), Merck (Darmstadt, Germany) in the highest purity available. Cyclohexane (&#x2265;99.8% purity) was obtained from Merck (Darmstadt, Germany), and cyclohexanone and cyclohexanol, &#x2265;99.5% purity, were purchased from Sigma-Aldrich (Steinheim, Germany).</p>
</sec>
<sec id="S2.SS2">
<title>Bacterial Strains and Plasmids</title>
<p>Bacterial strains and plasmids used in this study are listed in <xref ref-type="table" rid="T1">Table 1</xref>.</p>
<table-wrap position="float" id="T1">
<label>TABLE 1</label>
<caption><p>Strains and plasmid used in this study.</p></caption>
<table cellspacing="5" cellpadding="5" frame="hsides" rules="groups">
<thead>
<tr>
<td valign="top" align="left">Strain</td>
<td valign="top" align="left">Description</td>
<td valign="top" align="left">References</td>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="left"><italic>Synechocystis</italic> sp. PCC 6803</td>
<td valign="top" align="left">Geographical origin: California, United States; Received from Pasteur Culture Collection of Cyanobacteria (PCC, Paris, France)</td>
<td valign="top" align="left"><xref ref-type="bibr" rid="B50">Stanier et al., 1971</xref></td>
</tr>
<tr>
<td valign="top" align="left"><italic>Pseudomonas</italic> sp. VLB120</td>
<td valign="top" align="left">Wild-type Pseudomonas</td>
<td valign="top" align="left"><xref ref-type="bibr" rid="B36">Panke et al., 1998</xref></td>
</tr>
<tr>
<td valign="top" align="left">Plasmid</td>
<td valign="top" align="justify"/>
<td valign="top" align="justify"/>
</tr>
<tr>
<td valign="top" align="left">pCyp</td>
<td valign="top" align="left">Based on pAH032; CYP, FdR, and FR genes under the control of Ptrc1O promoter system, RBS<sup>&#x2217;</sup> optimized for Synechocystis sp. PCC 6803 in front of CYP gene</td>
<td valign="top" align="left"><xref ref-type="bibr" rid="B20">Hoschek et al., 2019b</xref></td>
</tr>
</tbody>
</table></table-wrap>
</sec>
<sec id="S2.SS3">
<title>Cultivation of Synechocystis sp. PCC6803</title>
<p>Cells were grown in YBG11 medium (10 and 50 mM HEPES depending on the application) without citrate and supplemented with 50 mM NaHCO<sub>3</sub>, composition: 1.49 g L<sup>&#x2013;1</sup> NaNO<sub>3</sub>, 0.074 g L<sup>&#x2013;1</sup> MgSO<sub>4</sub> 7 H<sub>2</sub>O, 0.0305 g L<sup>&#x2013;1</sup> K<sub>2</sub>HPO<sub>4</sub>, 10 mL L<sup>&#x2013;1</sup> YBG11 trace elements (100x), 0.019 g L<sup>&#x2013;1</sup> Na<sub>2</sub>CO<sub>3</sub>, 10 or 50 mM HEPES (pH 7.2); YBG11 trace elements (100x): 3.6 g L<sup>&#x2013;1</sup> CaCl<sub>2</sub> 2 H<sub>2</sub>O, 0.28 g L<sup>&#x2013;1</sup> boric acid, 0.11 g L<sup>&#x2013;1</sup> MnCl<sub>2</sub> 4 H<sub>2</sub>O, 0.02 g L<sup>&#x2013;1</sup> ZnSO<sub>4</sub> 7 H<sub>2</sub>O, 0.039 g L<sup>&#x2013;1</sup> Na<sub>2</sub>MoO<sub>4</sub> 2 H<sub>2</sub>O, 0.007 g L<sup>&#x2013;1</sup> CuSO<sub>4</sub> 5 H<sub>2</sub>O, 0.005 g L<sup>&#x2013;1</sup> Co(NO<sub>3</sub>)<sub>2</sub> 6 H<sub>2</sub>O, 0.162 g L<sup>&#x2013;1</sup> FeCl<sub>3</sub> 6 H<sub>2</sub>O, 0.6 g L<sup>&#x2013;1</sup> Na<sub>2</sub>EDTA 2 H<sub>2</sub>O, 4.2 g L<sup>&#x2013;1</sup> NaHCO<sub>3</sub> (<xref ref-type="bibr" rid="B48">Shcolnick et al., 2007</xref>).</p>
<p>Pre-cultures were inoculated using 200 &#x03BC;L of a <italic>Synechocystis</italic> sp. PCC 6803 cryo-stock in 20 mL YBG11 medium (50 mM HEPES) and cultivated in a 100 mL baffled shake flask at 30&#x00B0;C, 50 &#x03BC;E m<sup>&#x2013;2</sup> s<sup>&#x2013;1</sup> (LED), ambient CO<sub>2</sub> (0.04%), 150 rpm (2.5 cm amplitude), and 75% humidity in an orbital shaker (Multitron Pro shaker, Infors, Bottmingen, Switzerland) for 4 days. This culture was used to inoculate a 20 mL YBG11 main culture to a starting OD<sub>750</sub> of 0.08 and furthermore incubated for 4 days under the same conditions.</p>
</sec>
<sec id="S2.SS4">
<title>Cultivation of Pseudomonas sp. VLB120</title>
<p>Overnight cultures were inoculated directly from a 10% glycerol stock and used for inoculation of 5 mL lysogeny broth medium (<xref ref-type="bibr" rid="B3">Bertani, 1951</xref>) grown at 30&#x00B0;C and 200 rpm (2.5 cm amplitude) in a Multitron Pro shaker (Infors). 20 mL of M9<sup>&#x2217;</sup> medium (<xref ref-type="bibr" rid="B45">Sambrook et al., 2001</xref>) pre-cultures were inoculated (1% v/v) from this overnight culture and incubated for 24 h in 100 mL baffled shake flasks. Minimal medium main cultures were subsequently inoculated to an OD<sub>450</sub> of 0.2 and grown under the same conditions for 8 h in 20 mL M9<sup>&#x2217;</sup> medium.</p>
</sec>
<sec id="S2.SS5">
<title>Pre-mixing of Bacterial Strains</title>
<p>The optical density of each prepared main culture (<italic>Synechocystis</italic> sp. PCC 6803 and <italic>Pseudomonas</italic> sp.VLB120) was measured and the culture completely utilized for the pre-mixing, concentrated by centrifugation (5000 &#x00D7; <italic>g</italic>, 4&#x00B0;C, 7 min), and resuspended in 2 mL YBG11 medium (w/o citrate, 50 mM HEPES, 50 mM NaHCO<sub>3</sub>, Kanamycin 50 &#x03BC;g mL<sup>&#x2013;1</sup>). The mixed culture was inoculated in 20 mL YBG11 medium (w/o citrate, 50 mM HEPES, 50 mM NaHCO<sub>3</sub>) from the resulting cell suspensions to an OD<sub>750</sub> and OD<sub>450</sub> value of 1, cultivated in a 100 mL baffled shake flask and incubated at 30&#x00B0;C, 50 &#x03BC;mol m<sup>&#x2013;2</sup> s<sup>&#x2013;1</sup> (LED), ambient CO<sub>2</sub> (0.04%), 150 rpm (2.5 cm amplitude), and 75% humidity in a Multitron Pro shaker (Infors) for 24 h.</p>
</sec>
<sec id="S2.SS6">
<title>Capillary Reactor System Setup</title>
<p>Biofilms were cultivated in the capillary reactor system (<xref ref-type="supplementary-material" rid="SM1">Supplementary Figure S1A</xref>), as previously described (<xref ref-type="bibr" rid="B17">Heuschkel et al., 2019</xref>). Quartz (wall thickness (w.th.) 1 mm, inner diameter (i.d) 3 mm) and borosilicate glass tubes (w.th. 1 mm, i.d 3.5 mm) were cut to a length of 20 cm to serve as capillary reactors. YBG11 medium (10 mM HEPES, 50 mM NaHCO<sub>3</sub>) was supplied via Tygon tubing (LMT-55, 2.06 mm i.d., 0.88 mm w.th., Ismatec, Wertheim, Germany) using a peristaltic pump (ISM945D, Ismatec, Wertheim, Germany). The reactor system was inoculated by syringes through injection ports (ibidi GmbH, Martinsried, Germany) established in front of the capillary. Gas exchange for medium inlet as well as outlet and air segment generation was enabled through sterile filters (0.2 &#x03BC;m, Whatman, Maidstone, United Kingdom). Cultivation was performed at room temperature (RT, 24&#x00B0;C), and fluorescent light tubes were used as a light source (50 &#x03BC;mol m<sup>&#x2013;2</sup> s<sup>&#x2013;1</sup>). When applied for the experiment, the air was introduced into the system via Tygon tubing connected by a T-connector in the form of air segments after 7 days of cultivation.</p>
</sec>
<sec id="S2.SS7">
<title>Inoculation of the Capillary Reactor System</title>
<p>The capillary reactors were inoculated with mixed-species cell suspensions (as described in section &#x201C;Pre-mixing of Bacterial Strains&#x201D;) by purging 2 mL of each culture through the injection port. The medium flow was started 15 h after inoculation at a rate of ca. 52 &#x03BC;L min<sup>&#x2013;1</sup> (flow velocity of 0.09&#x2013;0.12 mm s<sup>&#x2013;1</sup>). When appropriate, air segments were started 7 days after inoculation at a rate of ca. 52 &#x03BC;L min<sup>&#x2013;1</sup> (flow velocity of 0.09&#x2013;0.12 mm s<sup>&#x2013;1</sup>), resulting in an increased overall flow rate of ca. 104 &#x03BC;L min<sup>&#x2013;1</sup> in the capillaries.</p>
</sec>
<sec id="S2.SS8">
<title>Cyclohexane Oxyfunctionalization in Capillary Biofilm Reactors</title>
<p>Cyclohexane was supplied via the gas feed. Therefore, the T connector combining air feed with the medium supply was connected to a cyclohexane saturation bottle. A silicone tube was used for cyclohexane diffusion into the feed stream and was submerged in 80 mL cyclohexane in a closed 100 mL Schott glass bottle (<xref ref-type="supplementary-material" rid="SM1">Supplementary Figure S1B</xref>). Heterologous gene expression in <italic>Pseudomonas</italic> sp. VLB120_pCyp (Ps<italic>_</italic>CYP) and <italic>Synechocystis</italic> sp. PCC 6803_ pCyp (Syn_CYP) of the cytochrome P450 monooxygenase was induced after 39&#x2013;41 days of cultivation by the addition of 1 mM IPTG to the medium and the cyclohexane feed was connected after one day to the capillary inlet using PTFE tubes. Liquid phase samples (1.2 mL) were collected from the reactor inlet and outlet. One mL sample was directly extracted by vigorous mixing for 2 min with 500 &#x03BC;L of ice-cold diethyl ether (0.2 mM decane as internal standard) followed by centrifugation (17,000 &#x00D7; <italic>g</italic>, 2 min, RT). The ether phase on top of the aqueous phase was removed, dried using anhydrous Na<sub>2</sub>SO<sub>4</sub>, and applied for quantification by gas chromatography.</p>
</sec>
<sec id="S2.SS9">
<title>Gas Chromatography (GC) for Cyclohexane, Cyclohexanol and Cyclohexanone Quantification</title>
<p>Ether samples (1 &#x03BC;L) were injected by a PTV injector, programmed with a temperature gradient of 10&#x00B0;C s<sup>&#x2013;1</sup> from 90&#x2013;300&#x00B0;C into a GC Trace 1310 (Thermo Fisher Scientific) equipped with a TG-5MS capillary column (5% diphenyl/95% dimethyl polysiloxane, 30 m, i.d. 0.25 mm, film thickness: 0.25 &#x03BC;m, Thermo Fisher Scientific). A split ratio of 11 was applied, and the oven temperature profile was set to 40&#x00B0;C for 1 min, 40&#x2013;80&#x00B0;C at 10&#x00B0;C min<sup>&#x2013;1</sup>, 80&#x2013;320&#x00B0;C at 100&#x00B0;C min<sup>&#x2013;1</sup>, and 320&#x00B0;C for 10 min, N<sub>2</sub> was applied as carrier gas (flow rate: 1.5 mL min<sup>&#x2013;1</sup>). The flame ionization detector was operated at 320&#x00B0;C, 350 mL min<sup>&#x2013;1</sup> air, 30 mL min<sup>&#x2013;1</sup> makeup gas, and 35 mL min<sup>&#x2013;1</sup> hydrogen gas flow.</p>
</sec>
<sec id="S2.SS10">
<title>O<sub>2</sub> Quantification in Gas and Liquid Phases</title>
<p>Dissolved O<sub>2</sub> in the reactor outlet was quantified by a Clark-type flow-through sensor (OX-500 Oxygen Microsensor, Unisense, Aarhus, Denmark) connected to a microsensor amplifier (Microsensor multimeter, Unisense). When air segments were used, bubble traps (sealed with a PTFE coated silicone septum, Duran, Mainz, Germany) were attached to the capillary outlet and equilibrated for 24 h. Gas-phase (100 &#x03BC;L) samples were obtained from the bubble traps using gas-tight syringes (Hamilton, Reno, United States) and quantified using a Trace 1310 gas chromatograph (Thermo Fisher Scientific, Waltham, United States). The gas chromatograph was equipped with a TG-BOND Msieve 5A capillary column (30 m, ID: 0.32 mm, film thickness: 30 &#x03BC;m, Thermo Fisher Scientific) and a thermal conductivity detector operating at 100&#x00B0;C with a filament temperature of 300&#x00B0;C and a reference gas flow rate of 4 mL min<sup>&#x2013;1</sup>. Argon gas was applied as carrier gas at a constant flow rate of 2 mL min<sup>&#x2013;1</sup>. The sample injection temperature was set to 50&#x00B0;C with a split ratio of 2, and the oven temperature was kept constant at 35&#x00B0;C for 3 min.</p>
</sec>
<sec id="S2.SS11">
<title>Determination of Biofilm Dry Weight</title>
<p>For biomass quantifications, the capillary reactor setup was disassembled, and the biomass removed from the tubes. The collected biomass was concentrated by centrifugation (5000 &#x00D7; <italic>g</italic>, 20&#x00B0;C, 7 min) in pre-dried and weight Pyrex tubes, dried again for 1 week at 80&#x00B0;C in an oven (Model 56, Binder GmbH, Tuttlingen, Germany) and was subsequently weighted.</p>
</sec>
</sec>
<sec id="S3">
<title>Results</title>
<sec id="S3.SS1">
<title>High Oxygen Amount Impedes Biofilm Development in the Single-Phase Medium Flow Conditions</title>
<p>The impact of the capillary material on the mixed-species biofilm development was evaluated by inoculating quartz and borosilicate glass capillaries with a mixed culture (ratio 1:1) of <italic>Synechocystis</italic> sp. PCC 6803 (pCyp) and <italic>Pseudomonas</italic> sp. VLB120 (pCyp). Two biological replicates for each capillary material were analyzed. The system was operated with a continuous feed of aqueous medium supplied at a flow velocity of 0.09&#x2013;0.12 mm s<sup>&#x2013;1</sup> for 14 days (<xref ref-type="supplementary-material" rid="SM1">Supplementary Figure S2</xref>). Oxygen evolution and total biomass formation were determined at the end of the experiment (<xref ref-type="fig" rid="F1">Figure 1A</xref>).</p>
<fig id="F1" position="float">
<label>FIGURE 1</label>
<caption><p>Final biomass recovered from glass capillaries, and O<sub>2</sub> concentration in the reactor outlet after 14 days <bold>(A)</bold>. Images of the biofilm grown in quartz capillary <bold>(B,i)</bold> and borosilicate capillary <bold>(B,ii)</bold> are displayed. BDW, biomass dry weight.</p></caption>
<graphic xlink:href="fbioe-08-588729-g001.tif"/>
</fig>
<p>In both materials, biofilm formation followed a gradient from sufficient growth in the beginning to weak growth toward the end of the capillary. The color of the biofilm changed accordingly from dark green to yellow and reflected the viability of <italic>Synechocystis</italic>, which tends to &#x201C;bleach&#x201D; when the organism is stressed or starved. Oxygen accumulated over the capillary length and a maximum oxygen amount of 748 &#x00B1; 16 &#x03BC;mol L<sup>&#x2013;1</sup> was measured in the medium phase at the end of the borosilicate capillaries. Only 6.96 g biomass dry weight (BDW) m<sup>&#x2013;2</sup> developed under these conditions. The saturation concentration of O<sub>2</sub> in water at 25&#x00B0;C corresponds to 276 &#x03BC;mol L<sup>&#x2013;1</sup> indicating a pronounced oxygen oversaturation within such capillary reactors. With the highest O<sub>2</sub> concentration of 827 &#x00B1; 118 &#x03BC;mol L<sup>&#x2013;1</sup> in the quartz capillary, the biofilm turned to a bright yellow color with the lowest biomass content 2.92 g<sub>BDW</sub> m<sup>&#x2013;2</sup> compared to the borosilicate capillary reactor (<xref ref-type="fig" rid="F1">Figure 1B</xref>). A similar effect of high O<sub>2</sub> concentrations causing a weak development of the mixed-species biofilm in polystyrene capillaries was described in the previous study (<xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>). The transition of biofilm color from light green to yellow indicates impairment of photosystem II and associated photo-pigments (<xref ref-type="bibr" rid="B29">Latifi et al., 2009</xref>; <xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>) due to oxygen oversaturation. Strategies to overcome oxygen stress are necessary to develop high cell density (HCD) phototrophic biofilms.</p>
</sec>
<sec id="S3.SS2">
<title>Air Segments Relieve High Oxygen Stress but Facilitate Biofilm Flush Outs in Glass Capillaries</title>
<p>In both glass capillary materials, the mixed-species biofilm grown in single-phase medium flow produced high amounts of O<sub>2</sub>, subsequently restricting biofilm growth. In order to relieve the oxidative stress imposed by O<sub>2</sub>, air segments were introduced into the medium flow. Within 24 h, the biofilm started to turn from yellow to green (<xref ref-type="supplementary-material" rid="SM1">Supplementary Figure S3</xref>), indicating that the high O<sub>2</sub> concentration was being relieved, and the impairment of the photosystem II and associated photo-pigments was reversible. The segmented flow resulted in the complete surface coverage by the dark green biofilm within 7 days (<xref ref-type="fig" rid="F2">Figure 2</xref>). After the biofilm was well grown, large biofilm parts were detached in both capillaries (<xref ref-type="fig" rid="F2">Figure 2</xref>). The detachment of large biofilm chunks was frequently identified at the rear part of the capillary, and the amount of detached biofilm varied profoundly (<xref ref-type="fig" rid="F2">Figure 2</xref>). In these experiments sloughing events were observed after a total of 14 days of biofilm cultivation. After the detachment, the biofilm regenerated itself, which under these conditions took one to two weeks after the sloughing events to achieve maximum surface coverage.</p>
<fig id="F2" position="float">
<label>FIGURE 2</label>
<caption><p>Four stages of biofilm development in a quartz glass capillary. The biofilm was grown without air segments for 7 days (phase 1) with a medium flow velocity of 0.09&#x2013;0.12 mm s<sup>&#x2013; 1</sup>, and air segments were started subsequently at the same flow rate (phase 2), which led to a fast surface coverage of the entire capillary (phase 2, 13 days total cultivation). After that, sloughing events (phase 3) and biofilm regrowth were observed (phase 4).</p></caption>
<graphic xlink:href="fbioe-08-588729-g002.tif"/>
</fig>
<p>Overall, four phases of mixed-species biofilm growth and development could be distinguished in glass capillaries. Phase 1 includes mixed-species biofilm growth under single-phase flow for 6&#x2013;7 days. In this phase, the biofilm growth and development are limited due to oversaturated oxygen in the aqueous phase. In phase 2, the start of air-segments relieved oxygen stress and resulted in a rapid increase of biofilm spatial coverage. Phase 3 begins with the sloughing of large biofilm patches from well-grown biofilms. Whereas, phase 4 consists of biofilm regrowth and the expansion of the spatial coverage. When cultivated further, phases 3 and 4 were observed to be recurring.</p>
</sec>
<sec id="S3.SS3">
<title>Stable Biocatalytic Performance of Mixed-Species Biofilms in Both Glass Materials Are Affected by Sloughing Events</title>
<p>The catalytic performance of biofilms is strongly associated with its development phases (<xref ref-type="bibr" rid="B9">Elenter et al., 2007</xref>). Therefore, we evaluated mixed-species catalytic performance at different biofilm developmental phases. The mixed-species biofilm was grown as described above, and the biotransformation was initiated for mixed-species biofilms at a matured state (phase 2). The product formation was measured for 13 days (<xref ref-type="fig" rid="F3">Figures 3B,C</xref>). In comparison to the previous experiments (<xref ref-type="fig" rid="F2">Figure 2</xref>), phase 2 was prolonged up to day 50&#x2013;54 for both glass capillaries (<xref ref-type="fig" rid="F3">Figure 3</xref>). The reason for this difference in the time interval is not clear.</p>
<fig id="F3" position="float">
<label>FIGURE 3</label>
<caption><p>Images of the mixed-species biofilm cultivated in quartz and borosilicate glass capillaries. Flush outs were observed after 50 days of biofilm cultivation in both capillaries <bold>(A)</bold>. Medium and air segments (from day 8 on) were fed at a flow velocity of 0.09&#x2013;0.12 mm s<sup>&#x2013; 1</sup>. The biotransformation was introduced after 42 days (arrow panel <bold>A</bold>), and the product formation recorded (panels <bold>B,C</bold>). The cyclohexane feed is represented as a dashed line for the quartz capillary at 1.35 &#x00B1; 0.42 mM and the borosilicate capillary at 1.63 &#x00B1; 0.45 mM. The arrows in panels <bold>(B,C)</bold> indicate sloughing effects. CHX-cyclohexane.</p></caption>
<graphic xlink:href="fbioe-08-588729-g003.tif"/>
</fig>
<p>In both capillaries, the production rate was at a maximum at the start and dropped to 1.0&#x2013;1.2 g m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> within the next 8 to 10 days. No detachments were recorded directly after starting the cyclohexane (CHX) feed. The average cyclohexanol (CHOL) production rate was 4.72 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> for 10 days of biotransformation in the quartz capillary and 4.08 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> for the first 8 days in the borosilicate capillary. The overoxidation of CHOL to cyclohexanone (CHON) was observed in both glass capillaries to be around 13%. In the quartz capillary, minor biofilm detachments were observed on day 52, leading to a drop in total product amount from 1.25 to 1.01 mM. On day 54, most parts of the biofilm were flushed out (<xref ref-type="fig" rid="F3">Figure 3A</xref>), and the total production rate dropped to 0.93 g m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup>.</p>
<p>In the borosilicate glass tube, two-third of the biofilm was detached at day 51, leading to a drop in the cyclohexanol production rate from 3.70 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> to 1.94 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup>. Further decrease in the production rate to 1.27 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> was identified on day 54. Overall, the total product formation in quartz glass was slightly higher (17%) than the borosilicate glass. Nevertheless, sloughing events were observed in both glass capillaries, resulting in a severe loss of biomass and subsequently production rates.</p>
</sec>
<sec id="S3.SS4">
<title>Biofilm Regrowth in Borosilicate Capillaries in the Presence of Cyclohexane Leads to High Productivities</title>
<p>In these experiments, we investigated mixed-species biofilm growth and biocatalytic performance after biofilm sloughing events (phase 3). As no major difference was observed for biofilm growth and development in both glass materials, borosilicate was chosen for further experiments. A significant portion of biofilm detached after 36&#x2013;39 days (<xref ref-type="fig" rid="F4">Figure 4A</xref>) due to sloughing. The biotransformation was initiated on day 41. Under the biotransformation conditions, the biofilms were able to recover completely in the following 7 days.</p>
<fig id="F4" position="float">
<label>FIGURE 4</label>
<caption><p>Images of the mixed-species biofilm cultivated in borosilicate capillaries <bold>(A)</bold>. Flush outs were found after 36 days, the biotransformation was initiated after 41 days (arrow panel <bold>A</bold>) and product formation recorded (panels <bold>B,C</bold>). Medium and air segments (from day 7 on) were fed at a flow velocity of 0.09&#x2013;0.12 mm s<sup>&#x2013; 1</sup>. The cyclohexane feed was visualized as a dashed line for capillary 1 at 1.60 &#x00B1; 0.3 mM and for capillary 2 at 1.97 &#x00B1; 0.70 mM. The arrows in panel <bold>(B,C)</bold> indicate light-off conditions. Abbreviation: CHX-cyclohexane.</p></caption>
<graphic xlink:href="fbioe-08-588729-g004.tif"/>
</fig>
<p>In the borosilicate capillary 1, the cyclohexanol production rate increased from 1.75 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> to 6.4 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup>, and it reached a steady-state after day 45 (<xref ref-type="fig" rid="F4">Figure 4B</xref>). In this case, the system seemed to be CHX limited, as 98% of the supplied substrate was converted. In the borosilicate capillary 2, the cyclohexanol production rate increased from 1.8 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> to 4.89 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> from day 41 to 48, respectively (<xref ref-type="fig" rid="F4">Figure 4C</xref>). Here, the system was not CHX limited, as only 76% of the CHX feed was converted. In both cases, minor amounts (3&#x2013;4%) of the overoxidation product CHON were detected.</p>
<p>At day 49 and 55, the light was turned off to investigate the impact of photosynthesis on the heterologous reaction. During the first dark period, the O<sub>2</sub> concentration in the air phase dropped by 5.0% and 3.7% in capillary 1 and 2, respectively (<xref ref-type="supplementary-material" rid="SM1">Supplementary Figure S4</xref>). Additionally, the product amount in the outflow was significantly reduced below 0.15 mM in both capillaries. Similar effects of the drop in O<sub>2</sub> and CHOL production were seen during the second dark period on day 55. These results led to the conclusion that electrons provided by photosynthetic water splitting fueled the biotransformation reaction. After the regrowth of the biofilms in both capillaries under biotransformation conditions, sloughing effects were detected again. This detachment resulted in a significant drop in the product concentration on day 57 and 53 in the capillary 1 and 2, respectively. Overall, we could conclude that the catalytic performance of mixed-species biofilm is dependent on the amount of available biomass with the capillary system.</p>
</sec>
</sec>
<sec id="S4">
<title>Discussion</title>
<p>Cyanobacteria are considered to be promising microorganisms for converting CO<sub>2</sub>, water, and solar radiation into value-added chemicals (<xref ref-type="bibr" rid="B58">Wijffels et al., 2013</xref>; <xref ref-type="bibr" rid="B11">Fernandes et al., 2015</xref>; <xref ref-type="bibr" rid="B12">Fern&#x00E1;ndez et al., 2019</xref>). The capability of cyanobacteria to assimilate CO<sub>2</sub> depends primarily on the catalytic properties of the ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) (<xref ref-type="bibr" rid="B54">Tcherkez, 2016</xref>). However, Rubisco&#x2019;s inability to discriminate between O<sub>2</sub> and CO<sub>2</sub> results in carboxylation and oxygenase activity, depending on their concentrations and the kinetic parameters (<xref ref-type="bibr" rid="B30">Liang et al., 2018</xref>; <xref ref-type="bibr" rid="B13">Flamholz et al., 2019</xref>). As oxygen is continuously generated in the oxygenic photosynthesis during the light reaction, its amount within the photosynthetic cell is considered to be higher than the ambient oxygen level (<xref ref-type="bibr" rid="B25">Kihara et al., 2014</xref>). Excess oxygen concentration in the functional photosynthetic cells not only affects the net carboxylation rate but can form reactive oxygen species (ROS), leading to oxidative damage of DNA, lipids, and proteins. In contrast to the suspended format, cyanobacterial cells growing in biofilms or microbial mats could reach oxygen concentrations several times higher (ca. 1000 &#x03BC;M) than the air-saturated water resulting in oxygen bubble formation (<xref ref-type="bibr" rid="B22">Jorgensen et al., 1983</xref>; <xref ref-type="bibr" rid="B42">Revsbech et al., 1983</xref>; <xref ref-type="bibr" rid="B5">Bosak et al., 2010</xref>). Correspondingly, we observed high oxygen amount of 748 to 827 &#x03BC;M in the reactor outflow (<xref ref-type="fig" rid="F1">Figure 1</xref>). Under such high oxygen content, the development of the mixed-species cyanobacterial (Syn. sp. PCC6803) biofilms were severely affected, leading to low biomass concentration in the glass capillaries.</p>
<p>In the previous work, high oxidative stress was overcome by introducing air segments, utilizing citrate catabolism in <italic>Pseudomonas</italic> species, and an oxygen-dependent biotransformation reaction to enable HCD mixed-species phototrophic biofilms in polystyrene capillary reactor (<xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>). In this work, air segments were introduced into the medium flow to extract excess O<sub>2</sub> from the biofilm and thereby to relieve oxidative stress imposed onto the cells. Overcoming the stress resulted in thick and dense biofilm growth (<xref ref-type="fig" rid="F2">Figure 2</xref>). However, the mixed-species phototrophic biofilm growth and development in the glass capillaries showed four distinct phases based on the investigated time frame as compared to only two phases in polystyrene capillary reactors (<xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>).</p>
<sec id="S4.SS1">
<title>Biofilm Sloughing: A Critical Issue in the Development of Stable Mixed-Species Biofilm</title>
<p>Biofilm development is characterized by constant removal of cells from the biofilm either when small portions of the biofilm are lost by frictional forces (erosion) or when large fractions are lost based on sloughing events (<xref ref-type="bibr" rid="B44">Rumbaugh and Sauer, 2020</xref>). Sloughing is considered to be an integral part of biofilm development (<xref ref-type="bibr" rid="B55">Telgmann et al., 2004</xref>), which could lead to a loss of more than 90% biomass within one day (<xref ref-type="fig" rid="F2">Figure 2</xref>). A similar event was described by <xref ref-type="bibr" rid="B55">Telgmann et al. (2004)</xref>, where 80% of biomass was lost due to the detachment of large biofilm portions. Reasons for sloughing are widespread. These include shear stresses, nutrient to oxygen gradients as well as a change in c-di-GMP levels inside the biofilm, e.g., by c-di-GMP-degradation (<xref ref-type="bibr" rid="B21">Hunt et al., 2004</xref>; <xref ref-type="bibr" rid="B56">Thormann et al., 2006</xref>; <xref ref-type="bibr" rid="B51">Stewart and Franklin, 2008</xref>; <xref ref-type="bibr" rid="B44">Rumbaugh and Sauer, 2020</xref>). In the mixed-species biofilm, the change in biomass and thickness with the biofilm growth (phase 2) in glass capillaries could increase (aqueous-air) segmented flow velocity and subsequently intensify shear stresses and aqueous-air interfacial forces. These external fluidic forces might become more substantial than the biofilm adhesive forces leading to the sloughing or detachment (<xref ref-type="bibr" rid="B52">Stoodley et al., 2002</xref>; <xref ref-type="bibr" rid="B18">Horn et al., 2003</xref>; <xref ref-type="bibr" rid="B47">Sharma et al., 2005</xref>; <xref ref-type="bibr" rid="B37">Paul et al., 2012</xref>). However, such events were not frequently observed in polystyrene capillaries (<xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>). This outcome points out that mixed-species biofilms have weakly adhered to glass capillaries as compared to the polystyrene capillary. There is also a possibility that biofilm adhesion to the glass surfaces becomes weaker with growth due to nutrient starvation or a different stress response of the biofilm. In the mixed-species biofilm, we observed yellow locations at the bottom of biofilm (<xref ref-type="fig" rid="F2">Figure 2</xref>). These color changes (green to yellow) might indicate nutrient starvation or oxidative stress because of high local O<sub>2</sub> concentrations. Such stresses might weaken the cell attachment and overall biofilm structure, leading to biofilm dispersion and subsequent detachment (<xref ref-type="bibr" rid="B35">Ohashi and Harada, 1995</xref>; <xref ref-type="bibr" rid="B2">Bazin and Prosser, 2018</xref>). Overall, the increase of external fluidic forces with biofilm growth and the decrease of internal biofilm strength caused by the hydrolysis of the polymeric biofilm matrix or due to oxidative stresses could be possible reasons for biofilm sloughing.</p>
</sec>
<sec id="S4.SS2">
<title>Biofilm Sloughing Severely Affects Mixed-Species Catalytic Performance</title>
<p>Sloughing may have two different effects on the product formation rate: (I) No impact on reactor performance, when only inactive biomass is lost, (II) severe impact on reactor performance due to the removal of active biomass (<xref ref-type="bibr" rid="B9">Elenter et al., 2007</xref>). In our experiments, sloughing was observed after the mixed-species biofilm reached a well-grown or matured stage, and this detachment was accompanied by a severe drop in the catalytic activity (<xref ref-type="fig" rid="F3">Figures 3</xref>, <xref ref-type="fig" rid="F4">4</xref>). These results conclude that the lost biofilm consisted mainly of active biomass. An average production rate of 4.72 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> (7.18 g L<sup>&#x2013;1</sup> d<sup>&#x2013;1</sup>) could be reached for a maximum of 10 days for the biofilm grown in the quartz glass capillary (<xref ref-type="table" rid="T2">Table 2</xref>).</p>
<table-wrap position="float" id="T2">
<label>TABLE 2</label>
<caption><p>Comparison of literature data for cyclohexanol production from cyclohexane.</p></caption>
<table cellspacing="5" cellpadding="5" frame="hsides" rules="groups">
<thead>
<tr>
<td valign="top" align="left">Biofilm</td>
<td valign="top" align="left">Capillary material</td>
<td valign="top" align="center">Average space-time yield [g<sub>CHOL</sub> m<sub>tube</sub><sup>&#x2013;2</sup> d<sup>&#x2013;1</sup>] ([g<sub>CHOL</sub> L<sub>tube</sub><sup>&#x2013;1</sup> h<sup>&#x2013;1</sup>])</td>
<td valign="top" align="center">Stability [d]</td>
<td valign="top" align="center">Electron donor</td>
<td valign="top" align="left">Remark</td>
<td valign="top" align="left">References</td>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="left">Pseudomonas sp. VLB 120</td>
<td valign="top" align="left">Silicone tube</td>
<td valign="top" align="center">4.8 (0.4)</td>
<td valign="top" align="center">18</td>
<td valign="top" align="center">Yeast extract</td>
<td valign="top" align="left">Organic carbon</td>
<td valign="top" align="left"><xref ref-type="bibr" rid="B23">Karande et al., 2016</xref></td>
</tr>
<tr>
<td valign="top" align="left">Mixed species<sup>a</sup></td>
<td valign="top" align="left">Polystyrene</td>
<td valign="top" align="center">3.8 (0.2)</td>
<td valign="top" align="center">31</td>
<td valign="top" align="center">Water</td>
<td valign="top" align="left">Minimal medium, no organic carbon</td>
<td valign="top" align="left"><xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref></td>
</tr>
<tr>
<td valign="top" align="left">Mixed species<sup>a</sup></td>
<td valign="top" align="left">Quartz glass</td>
<td valign="top" align="center">4.72 (0.3)</td>
<td valign="top" align="center">10</td>
<td valign="top" align="center">Water</td>
<td valign="top" align="left">Minimal medium, no organic carbon</td>
<td valign="top" align="left">This study</td>
</tr>
<tr>
<td valign="top" align="left">Mixed species<sup>a</sup></td>
<td valign="top" align="left">Borosilicate glass</td>
<td valign="top" align="center">4.08 (0.2)</td>
<td valign="top" align="center">8</td>
<td valign="top" align="center">Water</td>
<td valign="top" align="left">Minimal medium, no organic carbon</td>
<td valign="top" align="left">This study</td>
</tr>
</tbody>
</table>
<table-wrap-foot>
<attrib><italic><sup><italic>a</italic></sup>Mixed species biofilm <italic>Synechocystis</italic> sp. PCC6803 and <italic>Pseudomonas</italic> sp. VLB120.</italic></attrib>
</table-wrap-foot>
</table-wrap>
<p>Still, for a continuous biofilm-based process, 10 days of stable biocatalytic performance is considerably short. Our previous study reported a stable production rate of 3.8 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> for 31 days in a capillary reactor made from polystyrene (<xref ref-type="bibr" rid="B24">Karande et al., 2018</xref>; <xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>). In comparison to polystyrene capillaries, the glass surface has little texture, with an average roughness of 100 nm (for borosilicate glass) (<xref ref-type="bibr" rid="B40">Preedy et al., 2014</xref>). Here, a rougher surface might promote biofilm attachment and resistance against hydrodynamic forces to minimize sloughing events (<xref ref-type="bibr" rid="B38">Picioreanu et al., 2000</xref>). Furthermore, the light focusing effect of the glass-capillaries (<xref ref-type="bibr" rid="B39">Posten, 2009</xref>) might lead to increased light input resulting in high photosynthetic activity and enhanced O<sub>2</sub> accumulation. Such high oxygen content could trigger sloughing events and, therefore, biofilm growth and development at different light intensities (low 25 &#x03BC;E m<sup>&#x2013;2</sup> s<sup>&#x2013;1</sup>, high 100 &#x03BC;E m<sup>&#x2013;2</sup> s<sup>&#x2013;1</sup>) or with light-dark cycles need to be investigated to minimize sloughing events and retain constant production rates in glass capillaries.</p>
</sec>
</sec>
<sec id="S5">
<title>Conclusion</title>
<p>We observed four-phases for mixed-species biofilm growth in the glass-capillaries. It comprises biofilm growth, detachment, and regrowth. The change in flow condition from single to aqueous-air segmented flow resulted in faster growth, improved surface coverage, and enhanced biomass formation. For mature biofilms, biofilm detachment via sloughing and regrowth was frequently observed in glass capillaries. The biocatalytic performance of mixed-species was evaluated at different developmental phases. For mature biofilms, an average production rate of 4.72 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> for 10 days and 4.08 g<sub>CHOL</sub> m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> for 8 days were obtained for quartz and borosilicate glass, respectively. Product formation was associated with biofilm biomass and increased with the re-growing biofilm. Maximum product formation of 6.5 g m<sup>&#x2013;2</sup> d<sup>&#x2013;1</sup> was observed in the borosilicate capillary, although both glass types showed comparable results. The presence of the toxic substrate cyclohexane did not hamper biofilm growth and spatial coverage. The utilization of glasses as capillary reactor materials offers several benefits, such as the light focusing effect and excellent stability against solvents or UV radiation. Nevertheless, sloughing events were observed to be higher compared to other capillary materials, e.g., polystyrene (<xref ref-type="bibr" rid="B19">Hoschek et al., 2019a</xref>). Therefore, future research efforts on understanding sloughing mechanisms in the mixed-species biofilms and finding solutions to minimize them in glass capillaries are necessary.</p>
</sec>
<sec id="S6">
<title>Data Availability Statement</title>
<p>The raw data supporting the conclusions of this article will be made available by the authors, without undue reservation.</p>
</sec>
<sec id="S7">
<title>Author Contributions</title>
<p>RD and IH planned and conducted the experimental work and analyzed data. IH wrote the manuscript. RK and KB participated in designing experiments, data analysis, and correcting the manuscript. All authors contributed to the article and approved the submitted version.</p>
</sec>
<sec id="conf1">
<title>Conflict of Interest</title>
<p>The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.</p>
</sec>
</body>
<back>
<fn-group>
<fn fn-type="financial-disclosure">
<p><bold>Funding.</bold> IH was funded by the ERA-IB Project PolyBugs ID:16-006 and the S&#x00E4;chsisches Ministerium f&#x00FC;r Wissenschaft und Kunst (SMWK) Project ID: 100318259.</p>
</fn>
</fn-group>
<ack>
<p>We acknowledge the use of the facilities of the Centre for Biocatalysis (MiKat) at the Helmholtz Centre for Environmental Research. The Helmholtz Centre for Environmental Research is supported by the European Regional Development Funds (EFRE, Europe funds Saxony) and the Helmholtz Association.</p>
</ack>
<sec id="S10" sec-type="supplementary material"><title>Supplementary Material</title>
<p>The Supplementary Material for this article can be found online at: <ext-link ext-link-type="uri" xlink:href="https://www.frontiersin.org/articles/10.3389/fbioe.2020.588729/full#supplementary-material">https://www.frontiersin.org/articles/10.3389/fbioe.2020.588729/full#supplementary-material</ext-link></p>
<supplementary-material xlink:href="Data_Sheet_1.ZIP" id="SM1" mimetype="application/zip" xmlns:xlink="http://www.w3.org/1999/xlink"/>
</sec>
<ref-list>
<title>References</title>
<ref id="B1"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Angermayr</surname> <given-names>S. A.</given-names></name> <name><surname>Rovira</surname> <given-names>A. G.</given-names></name> <name><surname>Hellingwerf</surname> <given-names>K. J.</given-names></name></person-group> (<year>2015</year>). <article-title>Metabolic engineering of cyanobacteria for the synthesis of commodity products.</article-title> <source><italic>Trends Biotechnol.</italic></source> <volume>33</volume> <fpage>352</fpage>&#x2013;<lpage>361</lpage>. <pub-id pub-id-type="doi">10.1016/j.tibtech.2015.03.009</pub-id> <pub-id pub-id-type="pmid">25908503</pub-id></citation></ref>
<ref id="B2"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Bazin</surname> <given-names>M. J.</given-names></name> <name><surname>Prosser</surname> <given-names>J. I.</given-names></name></person-group> (<year>2018</year>). <source><italic>Physiological Models in Microbiology</italic></source>, <volume>Vol. 2</volume>. <publisher-loc>Boca Raton, FL</publisher-loc>: <publisher-name>CRC revivals</publisher-name>.</citation></ref>
<ref id="B3"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Bertani</surname> <given-names>G.</given-names></name></person-group> (<year>1951</year>). <article-title>Studies on lysogenesis. I. The mode of phage liberation by lysogenic <italic>Escherichia coli</italic>.</article-title> <source><italic>J. Bacteriol.</italic></source> <volume>62</volume> <fpage>293</fpage>&#x2013;<lpage>300</lpage>. <pub-id pub-id-type="doi">10.1128/JB.62.3.293-300.1951</pub-id> <pub-id pub-id-type="pmid">14888646</pub-id></citation></ref>
<ref id="B4"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>B&#x00F6;hmer</surname> <given-names>S.</given-names></name> <name><surname>K&#x00F6;ninger</surname> <given-names>K.</given-names></name> <name><surname>G&#x00F3;mez-Baraibar</surname> <given-names>&#x00C1;</given-names></name> <name><surname>Bojarra</surname> <given-names>S.</given-names></name> <name><surname>M&#x00FC;gge</surname> <given-names>C.</given-names></name> <name><surname>Schmidt</surname> <given-names>S.</given-names></name><etal/></person-group> (<year>2017</year>). <article-title>Enzymatic oxyfunctionalization driven by photosynthetic water-splitting in the cyanobacterium <italic>Synechocystis</italic> sp. PCC6803.</article-title> <source><italic>Catalysts</italic></source> <volume>7</volume>:<issue>240</issue>. <pub-id pub-id-type="doi">10.3390/catal7080240</pub-id></citation></ref>
<ref id="B5"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Bosak</surname> <given-names>T.</given-names></name> <name><surname>Bush</surname> <given-names>J. W. M.</given-names></name> <name><surname>Flynn</surname> <given-names>M. R.</given-names></name> <name><surname>Liang</surname> <given-names>B.</given-names></name> <name><surname>Ono</surname> <given-names>S.</given-names></name> <name><surname>Petroff</surname> <given-names>A. P.</given-names></name><etal/></person-group> (<year>2010</year>). <article-title>Formation and stability of oxygen-rich bubbles that shape photosynthetic mats.</article-title> <source><italic>Geobiology</italic></source> <volume>8</volume> <fpage>45</fpage>&#x2013;<lpage>55</lpage>. <pub-id pub-id-type="doi">10.1111/j.1472-4669.2009.00227.x</pub-id> <pub-id pub-id-type="pmid">20055899</pub-id></citation></ref>
<ref id="B6"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Burgess</surname> <given-names>G.</given-names></name> <name><surname>Fern&#x00E1;ndez-Velasco</surname> <given-names>J. G.</given-names></name> <name><surname>Lovegrove</surname> <given-names>K.</given-names></name></person-group> (<year>2007</year>). <article-title>Materials, geometry, and net energy ratio of tubular photobioreactors for microalgal hydrogen production.</article-title> <source><italic>Int. J. Hydrog. Energy</italic></source> <volume>32</volume> <fpage>1225</fpage>&#x2013;<lpage>1234</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijhydene.2006.10.055</pub-id></citation></ref>
<ref id="B7"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Chang</surname> <given-names>H. N.</given-names></name> <name><surname>Jung</surname> <given-names>K.</given-names></name> <name><surname>Choi</surname> <given-names>J.</given-names></name> <name><surname>Lee</surname> <given-names>J. C.</given-names></name> <name><surname>Woo</surname> <given-names>H. C.</given-names></name></person-group> (<year>2014</year>). <article-title>Multi-stage continuous high cell density culture systems: a review.</article-title> <source><italic>Biotechnol. Adv.</italic></source> <volume>32</volume> <fpage>514</fpage>&#x2013;<lpage>525</lpage>. <pub-id pub-id-type="doi">10.1016/j.biotechadv.2014.01.004</pub-id> <pub-id pub-id-type="pmid">24462363</pub-id></citation></ref>
<ref id="B8"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Ebrahimi</surname> <given-names>S.</given-names></name> <name><surname>Picioreanu</surname> <given-names>C.</given-names></name> <name><surname>Xavier</surname> <given-names>J. B.</given-names></name> <name><surname>Kleerebezem</surname> <given-names>R.</given-names></name> <name><surname>Kreutzer</surname> <given-names>M.</given-names></name> <name><surname>Kapteijn</surname> <given-names>F.</given-names></name><etal/></person-group> (<year>2005</year>). <article-title>Biofilm growth pattern in honeycomb monolith packings: effect of shear rate and substrate transport limitations.</article-title> <source><italic>Catal. Today</italic></source> <volume>105</volume> <fpage>448</fpage>&#x2013;<lpage>454</lpage>. <pub-id pub-id-type="doi">10.1016/j.cattod.2005.06.051</pub-id></citation></ref>
<ref id="B9"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Elenter</surname> <given-names>D.</given-names></name> <name><surname>Milferstedt</surname> <given-names>K.</given-names></name> <name><surname>Zhang</surname> <given-names>W.</given-names></name> <name><surname>Hausner</surname> <given-names>M.</given-names></name> <name><surname>Morgenroth</surname> <given-names>E.</given-names></name></person-group> (<year>2007</year>). <article-title>Influence of detachment on substrate removal and microbial ecology in a heterotrophic/autotrophic biofilm.</article-title> <source><italic>Water Res.</italic></source> <volume>41</volume> <fpage>4657</fpage>&#x2013;<lpage>4671</lpage>. <pub-id pub-id-type="doi">10.1016/j.watres.2007.06.050</pub-id> <pub-id pub-id-type="pmid">17655911</pub-id></citation></ref>
<ref id="B10"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Erb</surname> <given-names>T. J.</given-names></name> <name><surname>Zarzycki</surname> <given-names>J.</given-names></name></person-group> (<year>2016</year>). <article-title>Biochemical and synthetic biology approaches to improve photosynthetic CO2 -fixation.</article-title> <source><italic>Curr. Opin. Chem. Biol.</italic></source> <volume>34</volume> <fpage>72</fpage>&#x2013;<lpage>79</lpage>. <pub-id pub-id-type="doi">10.1016/j.cbpa.2016.06.026</pub-id> <pub-id pub-id-type="pmid">27400232</pub-id></citation></ref>
<ref id="B11"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Fernandes</surname> <given-names>B. D.</given-names></name> <name><surname>Mota</surname> <given-names>A.</given-names></name> <name><surname>Teixeira</surname> <given-names>J. A.</given-names></name> <name><surname>Vicente</surname> <given-names>A. A.</given-names></name></person-group> (<year>2015</year>). <article-title>Continuous cultivation of photosynthetic microorganisms: approaches, applications and future trends.</article-title> <source><italic>Biotechnol. Adv.</italic></source> <volume>33</volume> <fpage>1228</fpage>&#x2013;<lpage>1245</lpage>. <pub-id pub-id-type="doi">10.1016/j.biotechadv.2015.03.004</pub-id> <pub-id pub-id-type="pmid">25777495</pub-id></citation></ref>
<ref id="B12"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Fern&#x00E1;ndez</surname> <given-names>F. G. A.</given-names></name> <name><surname>Fern&#x00E1;ndez Sevilla</surname> <given-names>J. M.</given-names></name> <name><surname>Molina Grima</surname> <given-names>E.</given-names></name></person-group> (<year>2019</year>). &#x201C;<article-title>Costs analysis of microalgae production</article-title>,&#x201D; in <source><italic>Biofuels From Algae</italic></source>, <role>eds</role> <person-group person-group-type="editor"><name><surname>Pandey</surname> <given-names>A.</given-names></name> <name><surname>Lee</surname> <given-names>D.-J.</given-names></name> <name><surname>Chisti</surname> <given-names>Y.</given-names></name> <name><surname>Soccol</surname> <given-names>C. R.</given-names></name></person-group> (<publisher-loc>Amsterdam</publisher-loc>: <publisher-name>Elsevier</publisher-name>), <fpage>551</fpage>&#x2013;<lpage>566</lpage>. <pub-id pub-id-type="doi">10.1016/b978-0-444-64192-2.00021-4</pub-id></citation></ref>
<ref id="B13"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Flamholz</surname> <given-names>A. I.</given-names></name> <name><surname>Prywes</surname> <given-names>N.</given-names></name> <name><surname>Moran</surname> <given-names>U.</given-names></name> <name><surname>Davidi</surname> <given-names>D.</given-names></name> <name><surname>Bar-On</surname> <given-names>Y. M.</given-names></name> <name><surname>Oltrogge</surname> <given-names>L. M.</given-names></name><etal/></person-group> (<year>2019</year>). <article-title>Revisiting trade-offs between rubisco kinetic parameters.</article-title> <source><italic>Biochemistry</italic></source> <volume>58</volume> <fpage>3365</fpage>&#x2013;<lpage>3376</lpage>. <pub-id pub-id-type="doi">10.1021/acs.biochem.9b00237</pub-id> <pub-id pub-id-type="pmid">31259528</pub-id></citation></ref>
<ref id="B14"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Gao</surname> <given-names>X.</given-names></name> <name><surname>Sun</surname> <given-names>T.</given-names></name> <name><surname>Pei</surname> <given-names>G.</given-names></name> <name><surname>Chen</surname> <given-names>L.</given-names></name></person-group> (<year>2016</year>). <article-title>Cyanobacterial chassis engineering for enhancing production of biofuels and chemicals.</article-title> <source><italic>Appl. Microbiol. Biotechnol.</italic></source> <volume>100</volume> <fpage>3401</fpage>&#x2013;<lpage>3413</lpage>. <pub-id pub-id-type="doi">10.1007/s00253-016-7374-2</pub-id> <pub-id pub-id-type="pmid">26883347</pub-id></citation></ref>
<ref id="B15"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Halan</surname> <given-names>B.</given-names></name> <name><surname>Karande</surname> <given-names>R.</given-names></name> <name><surname>Buehler</surname> <given-names>K.</given-names></name> <name><surname>Schmid</surname> <given-names>A.</given-names></name></person-group> (<year>2016</year>). <article-title>Catalytic <italic>Pseudomonas taiwanensis</italic> VLB120&#x0394;C biofilms thrive in a continuous pure styrene generated by multiphasic segmented flow in a capillary microreactor.</article-title> <source><italic>J. Flow Chem.</italic></source> <volume>6</volume> <fpage>39</fpage>&#x2013;<lpage>42</lpage>. <pub-id pub-id-type="doi">10.1556/1846.2015.00037</pub-id></citation></ref>
<ref id="B16"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Hays</surname> <given-names>S. G.</given-names></name> <name><surname>Ducat</surname> <given-names>D. C.</given-names></name></person-group> (<year>2015</year>). <article-title>Engineering cyanobacteria as photosynthetic feedstock factories.</article-title> <source><italic>Photosynth. Res.</italic></source> <volume>123</volume> <fpage>285</fpage>&#x2013;<lpage>295</lpage>. <pub-id pub-id-type="doi">10.1007/s11120-014-9980-0</pub-id> <pub-id pub-id-type="pmid">24526260</pub-id></citation></ref>
<ref id="B17"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Heuschkel</surname> <given-names>I.</given-names></name> <name><surname>Hoschek</surname> <given-names>A.</given-names></name> <name><surname>Schmid</surname> <given-names>A.</given-names></name> <name><surname>B&#x00FC;hler</surname> <given-names>B.</given-names></name> <name><surname>Karande</surname> <given-names>R.</given-names></name> <name><surname>B&#x00FC;hler</surname> <given-names>K.</given-names></name></person-group> (<year>2019</year>). <article-title>Mixed-trophies biofilm cultivation in capillary reactors.</article-title> <source><italic>MethodsX</italic></source> <volume>6</volume> <fpage>1822</fpage>&#x2013;<lpage>1831</lpage>. <pub-id pub-id-type="doi">10.1016/j.mex.2019.07.021</pub-id> <pub-id pub-id-type="pmid">31467861</pub-id></citation></ref>
<ref id="B18"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Horn</surname> <given-names>H.</given-names></name> <name><surname>Reiff</surname> <given-names>H.</given-names></name> <name><surname>Morgenroth</surname> <given-names>E.</given-names></name></person-group> (<year>2003</year>). <article-title>Simulation of growth and detachment in biofilm systems under defined hydrodynamic conditions.</article-title> <source><italic>Biotechnol. Bioeng.</italic></source> <volume>81</volume> <fpage>607</fpage>&#x2013;<lpage>617</lpage>. <pub-id pub-id-type="doi">10.1002/bit.10503</pub-id> <pub-id pub-id-type="pmid">12514810</pub-id></citation></ref>
<ref id="B19"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Hoschek</surname> <given-names>A.</given-names></name> <name><surname>Heuschkel</surname> <given-names>I.</given-names></name> <name><surname>Schmid</surname> <given-names>A.</given-names></name> <name><surname>B&#x00FC;hler</surname> <given-names>B.</given-names></name> <name><surname>Karande</surname> <given-names>R.</given-names></name> <name><surname>B&#x00FC;hler</surname> <given-names>K.</given-names></name><etal/></person-group> (<year>2019a</year>). <article-title>Mixed-species biofilms for high-cell-density application of <italic>Synechocystis</italic> sp. PCC 6803 in capillary reactors for continuous cyclohexane oxidation to cyclohexanol.</article-title> <source><italic>Bioresour. Technol.</italic></source> <volume>282</volume> <fpage>171</fpage>&#x2013;<lpage>178</lpage>. <pub-id pub-id-type="doi">10.1016/j.biortech.2019.02.093</pub-id> <pub-id pub-id-type="pmid">30861446</pub-id></citation></ref>
<ref id="B20"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Hoschek</surname> <given-names>A.</given-names></name> <name><surname>Toepel</surname> <given-names>J.</given-names></name> <name><surname>Hochkeppel</surname> <given-names>A.</given-names></name> <name><surname>Karande</surname> <given-names>R.</given-names></name> <name><surname>B&#x00FC;hler</surname> <given-names>B.</given-names></name> <name><surname>Schmid</surname> <given-names>A.</given-names></name><etal/></person-group> (<year>2019b</year>). <article-title>Light-dependent and aeration-independent gram-scale hydroxylation of cyclohexane to cyclohexanol by CYP450 harboring <italic>Synechocystis</italic> sp. PCC 6803.</article-title> <source><italic>Biotechnol. J.</italic></source> <volume>14</volume> <fpage>1</fpage>&#x2013;<lpage>10</lpage>. <pub-id pub-id-type="doi">10.1002/biot.201800724</pub-id> <pub-id pub-id-type="pmid">31106963</pub-id></citation></ref>
<ref id="B21"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Hunt</surname> <given-names>S. M.</given-names></name> <name><surname>Werner</surname> <given-names>E. M.</given-names></name> <name><surname>Huang</surname> <given-names>B.</given-names></name> <name><surname>Hamilton</surname> <given-names>M. A.</given-names></name> <name><surname>Stewart</surname> <given-names>P. S.</given-names></name></person-group> (<year>2004</year>). <article-title>Hypothesis for the role of nutrient starvation in biofilm detachment.</article-title> <source><italic>Appl. Environ. Microbiol.</italic></source> <volume>70</volume> <fpage>7418</fpage>&#x2013;<lpage>7425</lpage>. <pub-id pub-id-type="doi">10.1128/AEM.70.12.7418</pub-id></citation></ref>
<ref id="B22"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Jorgensen</surname> <given-names>B. B.</given-names></name> <name><surname>Revsbech</surname> <given-names>N. P.</given-names></name> <name><surname>Cohen</surname> <given-names>Y.</given-names></name></person-group> (<year>1983</year>). <article-title>Photosynthesis and structure of benthic microbial mats: microelectrode and SEM studies of four cyanobacterial communities.</article-title> <source><italic>Limnol. Oceanogr.</italic></source> <volume>28</volume> <fpage>1075</fpage>&#x2013;<lpage>1093</lpage>. <pub-id pub-id-type="doi">10.4319/lo.1983.28.6.1075</pub-id></citation></ref>
<ref id="B23"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Karande</surname> <given-names>R.</given-names></name> <name><surname>Debor</surname> <given-names>L.</given-names></name> <name><surname>Salamanca</surname> <given-names>D.</given-names></name> <name><surname>Bogdahn</surname> <given-names>F.</given-names></name> <name><surname>Engesser</surname> <given-names>K. H.</given-names></name> <name><surname>Buehler</surname> <given-names>K.</given-names></name><etal/></person-group> (<year>2016</year>). <article-title>Continuous cyclohexane oxidation to cyclohexanol using a novel cytochrome P450 monooxygenase from <italic>Acidovorax</italic> sp. CHX100 in recombinant <italic>P. taiwanensis</italic> VLB120 biofilms.</article-title> <source><italic>Biotechnol. Bioeng.</italic></source> <volume>113</volume> <fpage>52</fpage>&#x2013;<lpage>61</lpage>. <pub-id pub-id-type="doi">10.1002/bit.25696</pub-id> <pub-id pub-id-type="pmid">26153144</pub-id></citation></ref>
<ref id="B24"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Karande</surname> <given-names>R.</given-names></name> <name><surname>Hoschek</surname> <given-names>A.</given-names></name> <name><surname>Heuschkel</surname> <given-names>I.</given-names></name> <name><surname>B&#x00FC;hler</surname> <given-names>K.</given-names></name> <name><surname>Schmid</surname> <given-names>A.</given-names></name></person-group> (<year>2018</year>). <article-title>A composition of photoautotrophic microorganisms and chemoheterotrophic microorganisms in a biofilm.</article-title> <source><italic>Biotechnol. Bioeng.</italic></source> <volume>113</volume> <fpage>52</fpage>&#x2013;<lpage>61</lpage>.</citation></ref>
<ref id="B25"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Kihara</surname> <given-names>S.</given-names></name> <name><surname>Hartzler</surname> <given-names>D. A.</given-names></name> <name><surname>Savikhin</surname> <given-names>S.</given-names></name></person-group> (<year>2014</year>). <article-title>Oxygen concentration inside a functioning photosynthetic cell.</article-title> <source><italic>Biophys. J.</italic></source> <volume>106</volume> <fpage>1882</fpage>&#x2013;<lpage>1889</lpage>. <pub-id pub-id-type="doi">10.1016/j.bpj.2014.03.031</pub-id> <pub-id pub-id-type="pmid">24806920</pub-id></citation></ref>
<ref id="B26"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Kreutzer</surname> <given-names>M. T.</given-names></name> <name><surname>Bakker</surname> <given-names>J. J. W.</given-names></name> <name><surname>Kapteijn</surname> <given-names>F.</given-names></name> <name><surname>Moulijn</surname> <given-names>J. A.</given-names></name> <name><surname>Verheijen</surname> <given-names>P. J. T.</given-names></name></person-group> (<year>2005a</year>). <article-title>Scaling-up multiphase monolith reactors: linking residence time distribution and feed maldistribution.</article-title> <source><italic>Ind. Eng. Chem. Res.</italic></source> <volume>44</volume> <fpage>4898</fpage>&#x2013;<lpage>4913</lpage>. <pub-id pub-id-type="doi">10.1021/ie0492350</pub-id></citation></ref>
<ref id="B27"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Kreutzer</surname> <given-names>M. T.</given-names></name> <name><surname>Kapteijn</surname> <given-names>F.</given-names></name> <name><surname>Moulijn</surname> <given-names>J. A.</given-names></name> <name><surname>Heiszwolf</surname> <given-names>J. J.</given-names></name></person-group> (<year>2005b</year>). <article-title>Multiphase monolith reactors: chemical reaction engineering of segmented flow in microchannels.</article-title> <source><italic>Chem. Eng. Sci.</italic></source> <volume>60</volume> <fpage>5895</fpage>&#x2013;<lpage>5916</lpage>. <pub-id pub-id-type="doi">10.1016/j.ces.2005.03.022</pub-id></citation></ref>
<ref id="B28"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Kreutzer</surname> <given-names>M. T.</given-names></name> <name><surname>Kapteijn</surname> <given-names>F.</given-names></name> <name><surname>Moulijn</surname> <given-names>J. A.</given-names></name></person-group> (<year>2006</year>). <article-title>Shouldn&#x2019;t catalysts shape up? Structured reactors in general and gas-liquid monolith reactors in particular.</article-title> <source><italic>Catal. Today</italic></source> <volume>111</volume> <fpage>111</fpage>&#x2013;<lpage>118</lpage>. <pub-id pub-id-type="doi">10.1016/j.cattod.2005.10.014</pub-id></citation></ref>
<ref id="B29"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Latifi</surname> <given-names>A.</given-names></name> <name><surname>Ruiz</surname> <given-names>M.</given-names></name> <name><surname>Zhang</surname> <given-names>C.</given-names></name></person-group> (<year>2009</year>). <article-title>Oxidative stress in cyanobacteria.</article-title> <source><italic>FEMS Microbiol. Rev.</italic></source> <volume>33</volume> <fpage>258</fpage>&#x2013;<lpage>278</lpage>. <pub-id pub-id-type="doi">10.1111/j.1574-6976.2008.00134.x</pub-id> <pub-id pub-id-type="pmid">18834454</pub-id></citation></ref>
<ref id="B30"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Liang</surname> <given-names>F.</given-names></name> <name><surname>Englund</surname> <given-names>E.</given-names></name> <name><surname>Lindberg</surname> <given-names>P.</given-names></name> <name><surname>Lindblad</surname> <given-names>P.</given-names></name></person-group> (<year>2018</year>). <article-title>Engineered cyanobacteria with enhanced growth show increased ethanol production and higher biofuel to biomass ratio.</article-title> <source><italic>Metab. Eng.</italic></source> <volume>46</volume> <fpage>51</fpage>&#x2013;<lpage>59</lpage>. <pub-id pub-id-type="doi">10.1016/j.ymben.2018.02.006</pub-id> <pub-id pub-id-type="pmid">29477858</pub-id></citation></ref>
<ref id="B31"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Mellor</surname> <given-names>S. B.</given-names></name> <name><surname>Vavitsas</surname> <given-names>K.</given-names></name> <name><surname>Nielsen</surname> <given-names>A. Z.</given-names></name> <name><surname>Jensen</surname> <given-names>P. E.</given-names></name></person-group> (<year>2017</year>). <article-title>Photosynthetic fuel for heterologous enzymes: the role of electron carrier proteins.</article-title> <source><italic>Photosynth. Res.</italic></source> <volume>134</volume> <fpage>329</fpage>&#x2013;<lpage>342</lpage>. <pub-id pub-id-type="doi">10.1007/s11120-017-0364-0</pub-id> <pub-id pub-id-type="pmid">28285375</pub-id></citation></ref>
<ref id="B32"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Morgenroth</surname> <given-names>E.</given-names></name> <name><surname>Wilderer</surname> <given-names>P. A.</given-names></name></person-group> (<year>2000</year>). <article-title>Influence of detachment mechanism on competition in biofilms.</article-title> <source><italic>Water Ressour.</italic></source> <volume>34</volume> <fpage>417</fpage>&#x2013;<lpage>426</lpage>. <pub-id pub-id-type="doi">10.1016/s0043-1354(99)00157-8</pub-id></citation></ref>
<ref id="B33"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Mukherjee</surname> <given-names>B.</given-names></name> <name><surname>Madhu</surname> <given-names>S.</given-names></name> <name><surname>Wangikar</surname> <given-names>P. P.</given-names></name></person-group> (<year>2020</year>). <article-title>The role of systems biology in developing non-model cyanobacteria as hosts for chemical production.</article-title> <source><italic>Curr. Opin. Biotechnol.</italic></source> <volume>64</volume> <fpage>62</fpage>&#x2013;<lpage>69</lpage>. <pub-id pub-id-type="doi">10.1016/j.copbio.2019.10.003</pub-id> <pub-id pub-id-type="pmid">31715493</pub-id></citation></ref>
<ref id="B34"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Nore&#x00F1;a-Caro</surname> <given-names>D.</given-names></name> <name><surname>Benton</surname> <given-names>M. G.</given-names></name></person-group> (<year>2018</year>). <article-title>Cyanobacteria as photoautotrophic biofactories of high-value chemicals.</article-title> <source><italic>J. CO2 Util.</italic></source> <volume>28</volume> <fpage>335</fpage>&#x2013;<lpage>366</lpage>. <pub-id pub-id-type="doi">10.1016/j.jcou.2018.10.008</pub-id></citation></ref>
<ref id="B35"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Ohashi</surname> <given-names>A.</given-names></name> <name><surname>Harada</surname> <given-names>H.</given-names></name></person-group> (<year>1995</year>). <article-title>Characterization of detachment mode of biofilm developed in an attached-growth reactor.</article-title> <source><italic>Waster Sci. Techol.</italic></source> <volume>30</volume> <fpage>35</fpage>&#x2013;<lpage>45</lpage>. <pub-id pub-id-type="doi">10.2166/wst.1994.0544</pub-id></citation></ref>
<ref id="B36"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Panke</surname> <given-names>S.</given-names></name> <name><surname>Witholt</surname> <given-names>B.</given-names></name> <name><surname>Schmid</surname> <given-names>A.</given-names></name> <name><surname>Wubbolts</surname> <given-names>M. G.</given-names></name></person-group> (<year>1998</year>). <article-title>Towards a biocatalyst for (S)-styrene oxide production: characterization of the styrene degradation pathway of <italic>Pseudomonas</italic> sp. strain VLB120.</article-title> <source><italic>Appl Env. Microbiol</italic></source> <volume>64</volume> <fpage>2032</fpage>&#x2013;<lpage>2043</lpage>. <pub-id pub-id-type="doi">10.1128/aem.64.6.2032-2043.1998</pub-id> <pub-id pub-id-type="pmid">9603811</pub-id></citation></ref>
<ref id="B37"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Paul</surname> <given-names>E.</given-names></name> <name><surname>Ochoa</surname> <given-names>J. C.</given-names></name> <name><surname>Pechaud</surname> <given-names>Y.</given-names></name> <name><surname>Liu</surname> <given-names>Y.</given-names></name> <name><surname>Line</surname> <given-names>A.</given-names></name></person-group> (<year>2012</year>). <article-title>Effect of shear stress and growth conditions on detachment and physical properties of biofilms.</article-title> <source><italic>Water Res.</italic></source> <volume>46</volume> <fpage>5499</fpage>&#x2013;<lpage>5508</lpage>. <pub-id pub-id-type="doi">10.1016/j.watres.2012.07.029</pub-id> <pub-id pub-id-type="pmid">22898671</pub-id></citation></ref>
<ref id="B38"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Picioreanu</surname> <given-names>C.</given-names></name> <name><surname>Van Loosdrecht</surname> <given-names>M. C. M.</given-names></name> <name><surname>Heijnen</surname> <given-names>J. J.</given-names></name></person-group> (<year>2000</year>). <article-title>Two-dimensional model of biofilm detachment caused by internal stress from liquid flow.</article-title> <source><italic>Biotechnol. Bioeng.</italic></source> <volume>72</volume> <fpage>205</fpage>&#x2013;<lpage>218</lpage>. <pub-id pub-id-type="doi">10.1002/1097-0290(20000120)72:2&#x003C;205::aid-bit9&#x003E;3.0.co;2-l</pub-id></citation></ref>
<ref id="B39"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Posten</surname> <given-names>C.</given-names></name></person-group> (<year>2009</year>). <article-title>Design principles of photo-bioreactors for cultivation of microalgae.</article-title> <source><italic>Eng. Life Sci.</italic></source> <volume>9</volume> <fpage>165</fpage>&#x2013;<lpage>177</lpage>. <pub-id pub-id-type="doi">10.1002/elsc.200900003</pub-id></citation></ref>
<ref id="B40"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Preedy</surname> <given-names>E.</given-names></name> <name><surname>Perni</surname> <given-names>S.</given-names></name> <name><surname>Nipic</surname> <given-names>D.</given-names></name> <name><surname>Bohinc</surname> <given-names>K.</given-names></name> <name><surname>Prokopovich</surname> <given-names>P.</given-names></name></person-group> (<year>2014</year>). <article-title>Surface roughness mediated adhesion forces between borosilicate glass and gram-positive bacteria.</article-title> <source><italic>Langmuir</italic></source> <volume>30</volume> <fpage>9466</fpage>&#x2013;<lpage>9476</lpage>. <pub-id pub-id-type="doi">10.1021/la501711t</pub-id> <pub-id pub-id-type="pmid">25019516</pub-id></citation></ref>
<ref id="B41"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Pulz</surname> <given-names>O.</given-names></name> <name><surname>Gross</surname> <given-names>W.</given-names></name></person-group> (<year>2004</year>). <article-title>Valuable products from biotechnology of microalgae.</article-title> <source><italic>Appl. Microbiol. Biotechnol.</italic></source> <volume>65</volume> <fpage>635</fpage>&#x2013;<lpage>648</lpage>. <pub-id pub-id-type="doi">10.1007/s00253-004-1647-x</pub-id> <pub-id pub-id-type="pmid">15300417</pub-id></citation></ref>
<ref id="B42"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Revsbech</surname> <given-names>N. P.</given-names></name> <name><surname>Jorgensen</surname> <given-names>B. B.</given-names></name> <name><surname>Blackburn</surname> <given-names>T. H.</given-names></name> <name><surname>Cohen</surname> <given-names>Y.</given-names></name></person-group> (<year>1983</year>). <article-title>Microelectrode studies of the photosynthesis and O2, H2S, and pH profiles of a microbial mat.</article-title> <source><italic>Limnol. Oceanogr.</italic></source> <volume>28</volume> <fpage>1062</fpage>&#x2013;<lpage>1074</lpage>. <pub-id pub-id-type="doi">10.4319/lo.1983.28.6.1062</pub-id></citation></ref>
<ref id="B43"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Rosche</surname> <given-names>B.</given-names></name> <name><surname>Li</surname> <given-names>X. Z.</given-names></name> <name><surname>Hauer</surname> <given-names>B.</given-names></name> <name><surname>Schmid</surname> <given-names>A.</given-names></name> <name><surname>Buehler</surname> <given-names>K.</given-names></name></person-group> (<year>2009</year>). <article-title>Microbial biofilms: a concept for industrial catalysis?</article-title> <source><italic>Trends Biotechnol.</italic></source> <volume>27</volume> <fpage>636</fpage>&#x2013;<lpage>643</lpage>. <pub-id pub-id-type="doi">10.1016/j.tibtech.2009.08.001</pub-id> <pub-id pub-id-type="pmid">19783314</pub-id></citation></ref>
<ref id="B44"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Rumbaugh</surname> <given-names>K. P.</given-names></name> <name><surname>Sauer</surname> <given-names>K.</given-names></name></person-group> (<year>2020</year>). <article-title>Biofilm dispersion.</article-title> <source><italic>Nat. Rev. Microbiol.</italic></source> <pub-id pub-id-type="doi">10.1038/s41579-020-0385-0</pub-id> <pub-id pub-id-type="pmid">32533131</pub-id></citation></ref>
<ref id="B45"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Sambrook</surname> <given-names>J.</given-names></name> <name><surname>Russell</surname> <given-names>D. W.</given-names></name> <name><surname>Maniatis</surname> <given-names>T.</given-names></name></person-group> (<year>2001</year>). <source><italic>Molecular Cloning: A Laboratory Manual</italic></source>, <edition>3rd Edn</edition>. <publisher-loc>Cold Spring Harbor, NY</publisher-loc>: <publisher-name>Cold Spring Harbor Laboratory Press</publisher-name>.</citation></ref>
<ref id="B46"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Santos-Merino</surname> <given-names>M.</given-names></name> <name><surname>Singh</surname> <given-names>A. K.</given-names></name> <name><surname>Ducat</surname> <given-names>D. C.</given-names></name></person-group> (<year>2019</year>). <article-title>New applications of synthetic biology tools for cyanobacterial metabolic engineering.</article-title> <source><italic>Front. Bioeng. Biotechnol.</italic></source> <volume>7</volume>:<issue>33</issue>. <pub-id pub-id-type="doi">10.3389/fbioe.2019.00033</pub-id> <pub-id pub-id-type="pmid">30873404</pub-id></citation></ref>
<ref id="B47"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Sharma</surname> <given-names>P. K.</given-names></name> <name><surname>Gibcus</surname> <given-names>M. J.</given-names></name> <name><surname>Van Der Mei</surname> <given-names>H. C.</given-names></name> <name><surname>Busscher</surname> <given-names>H. J.</given-names></name></person-group> (<year>2005</year>). <article-title>Influence of fluid shear and microbubbles on bacterial detachment from a surface.</article-title> <source><italic>Appl. Environ. Microbiol.</italic></source> <volume>71</volume> <fpage>3668</fpage>&#x2013;<lpage>3673</lpage>. <pub-id pub-id-type="doi">10.1128/AEM.71.7.3668-3673.2005</pub-id> <pub-id pub-id-type="pmid">16000775</pub-id></citation></ref>
<ref id="B48"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Shcolnick</surname> <given-names>S.</given-names></name> <name><surname>Shaked</surname> <given-names>Y.</given-names></name> <name><surname>Kelenn</surname> <given-names>N.</given-names></name></person-group> (<year>2007</year>). <article-title>A role for mrgA, a DPS family protein, in the internal transport of Fe in the cyanobacterium <italic>Synechocystis</italic> sp. PCC6803.</article-title> <source><italic>Biochim. Biophys. Acta Bioenerget.</italic></source> <volume>1767</volume> <fpage>814</fpage>&#x2013;<lpage>819</lpage>. <pub-id pub-id-type="doi">10.1016/j.bbabio.2006.11.015</pub-id> <pub-id pub-id-type="pmid">17234153</pub-id></citation></ref>
<ref id="B49"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Spolaore</surname> <given-names>P.</given-names></name> <name><surname>Joannis-Cassan</surname> <given-names>C.</given-names></name> <name><surname>Duran</surname> <given-names>E.</given-names></name> <name><surname>Isambert</surname> <given-names>A.</given-names></name></person-group> (<year>2006</year>). <article-title>Commercial applications of microalgae.</article-title> <source><italic>J. Biosci. Bioeng.</italic></source> <volume>101</volume> <fpage>87</fpage>&#x2013;<lpage>96</lpage>. <pub-id pub-id-type="doi">10.1263/jbb.101.87</pub-id> <pub-id pub-id-type="pmid">16569602</pub-id></citation></ref>
<ref id="B50"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Stanier</surname> <given-names>R. Y.</given-names></name> <name><surname>Kunisawa</surname> <given-names>R.</given-names></name> <name><surname>Mandel</surname> <given-names>M.</given-names></name> <name><surname>Cohen-Bazire</surname> <given-names>G.</given-names></name></person-group> (<year>1971</year>). <article-title>Purification and properties of unicellular blue-green algae (Order <italic>Chroococcales</italic>).</article-title> <source><italic>Bacteriol. Rev.</italic></source> <volume>35</volume> <fpage>171</fpage>&#x2013;<lpage>205</lpage>. <pub-id pub-id-type="doi">10.1016/j.jbiotec.2013.07.020</pub-id> <pub-id pub-id-type="pmid">23886651</pub-id></citation></ref>
<ref id="B51"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Stewart</surname> <given-names>P. S.</given-names></name> <name><surname>Franklin</surname> <given-names>M. J.</given-names></name></person-group> (<year>2008</year>). <article-title>Physiological heterogeneity in biofilms.</article-title> <source><italic>Nat. Rev. Microbiol.</italic></source> <volume>6</volume> <fpage>199</fpage>&#x2013;<lpage>210</lpage>. <pub-id pub-id-type="doi">10.1038/nrmicro1838</pub-id> <pub-id pub-id-type="pmid">18264116</pub-id></citation></ref>
<ref id="B52"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Stoodley</surname> <given-names>P.</given-names></name> <name><surname>Cargo</surname> <given-names>R.</given-names></name> <name><surname>Rupp</surname> <given-names>C. J.</given-names></name> <name><surname>Wilson</surname> <given-names>S.</given-names></name> <name><surname>Klapper</surname> <given-names>I.</given-names></name></person-group> (<year>2002</year>). <article-title>Biofilm material properties as related to shear-induced deformation and detachment phenomena.</article-title> <source><italic>J. Ind. Microbiol. Biotechnol.</italic></source> <volume>29</volume> <fpage>361</fpage>&#x2013;<lpage>367</lpage>. <pub-id pub-id-type="doi">10.1038/sj.jim.7000282</pub-id> <pub-id pub-id-type="pmid">12483479</pub-id></citation></ref>
<ref id="B53"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Sun</surname> <given-names>T.</given-names></name> <name><surname>Li</surname> <given-names>S.</given-names></name> <name><surname>Song</surname> <given-names>X.</given-names></name> <name><surname>Diao</surname> <given-names>J.</given-names></name> <name><surname>Chen</surname> <given-names>L.</given-names></name> <name><surname>Zhang</surname> <given-names>W.</given-names></name></person-group> (<year>2018</year>). <article-title>Toolboxes for cyanobacteria: recent advances and future direction.</article-title> <source><italic>Biotechnol. Adv.</italic></source> <volume>36</volume> <fpage>1293</fpage>&#x2013;<lpage>1307</lpage>. <pub-id pub-id-type="doi">10.1016/j.biotechadv.2018.04.007</pub-id> <pub-id pub-id-type="pmid">29729377</pub-id></citation></ref>
<ref id="B54"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Tcherkez</surname> <given-names>G.</given-names></name></person-group> (<year>2016</year>). <article-title>The mechanism of Rubisco-catalysed oxygenation.</article-title> <source><italic>Plant Cell Environ.</italic></source> <volume>39</volume> <fpage>983</fpage>&#x2013;<lpage>997</lpage>. <pub-id pub-id-type="doi">10.1111/pce.12629</pub-id> <pub-id pub-id-type="pmid">26286702</pub-id></citation></ref>
<ref id="B55"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Telgmann</surname> <given-names>U.</given-names></name> <name><surname>Horn</surname> <given-names>H.</given-names></name> <name><surname>Morgenroth</surname> <given-names>E.</given-names></name></person-group> (<year>2004</year>). <article-title>Influence of growth history on sloughing and erosion from biofilms.</article-title> <source><italic>Water</italic></source> <volume>38</volume> <fpage>3671</fpage>&#x2013;<lpage>3684</lpage>. <pub-id pub-id-type="doi">10.1016/j.watres.2004.05.020</pub-id> <pub-id pub-id-type="pmid">15350418</pub-id></citation></ref>
<ref id="B56"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Thormann</surname> <given-names>K. M.</given-names></name> <name><surname>Duttler</surname> <given-names>S.</given-names></name> <name><surname>Saville</surname> <given-names>R. M.</given-names></name> <name><surname>Hyodo</surname> <given-names>M.</given-names></name> <name><surname>Shukla</surname> <given-names>S.</given-names></name> <name><surname>Hayakawa</surname> <given-names>Y.</given-names></name><etal/></person-group> (<year>2006</year>). <article-title>Control of formation and cellular detachment from <italic>Shewanella onedensis</italic> MR-1 biofilms by cyclic di-GMP.</article-title> <source><italic>J. Bacteriol.</italic></source> <volume>188</volume> <fpage>2681</fpage>&#x2013;<lpage>2691</lpage>. <pub-id pub-id-type="doi">10.1128/JB.188.7.2681</pub-id></citation></ref>
<ref id="B57"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Whelan</surname> <given-names>A.</given-names></name> <name><surname>Whelan</surname> <given-names>T.</given-names></name></person-group> (<year>1994</year>). <source><italic>Polymer Technology Dictionary.</italic></source> <publisher-loc>Berlin</publisher-loc>: <publisher-name>Springer Science &#x0026; Business Media</publisher-name>.</citation></ref>
<ref id="B58"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Wijffels</surname> <given-names>R. H.</given-names></name> <name><surname>Kruse</surname> <given-names>O.</given-names></name> <name><surname>Hellingwerf</surname> <given-names>K. J.</given-names></name></person-group> (<year>2013</year>). <article-title>Potential of industrial biotechnology with cyanobacteria and eukaryotic microalgae.</article-title> <source><italic>Curr. Opin. Biotechnol.</italic></source> <volume>24</volume> <fpage>405</fpage>&#x2013;<lpage>413</lpage>. <pub-id pub-id-type="doi">10.1016/j.copbio.2013.04.004</pub-id> <pub-id pub-id-type="pmid">23647970</pub-id></citation></ref>
<ref id="B59"><citation citation-type="journal"><person-group person-group-type="author"><name><surname>Yousif</surname> <given-names>E.</given-names></name> <name><surname>Haddad</surname> <given-names>R.</given-names></name></person-group> (<year>2013</year>). <article-title>Photodegradation and photostabilization of polymers, especially polystyrene: review.</article-title> <source><italic>SpringerPlus</italic></source> <volume>2</volume>:<issue>398</issue>. <pub-id pub-id-type="doi">10.1186/2193-1801-2-398</pub-id> <pub-id pub-id-type="pmid">25674392</pub-id></citation></ref>
</ref-list>
</back>
</article>