REVIEW article

Front. Biomater. Sci., 23 October 2026

Sec. Biomaterials Manufacturing and Technology

Volume 5 - 2026 | https://doi.org/10.3389/fbiom.2026.1858048

Biogenic synthesis: an alternative method for metallic and metal-based nanomaterials

  • Tecnologico de Monterrey, School of Engineering and Science, Monterrey, Nuevo Leon, Mexico

Abstract

Nanomaterials have been present for centuries as colloidal materials in historical objects such as Lycurgus Cup, medieval church windows and weapons made of Damascus steel. However, it was until Turkevich designed a controlled synthesis method for metallic nanomaterials (MNMs), specifically gold nanoparticles. Nowadays, many methods have been proposed for the preparation or synthesis of MNMs relying on two approaches: top-down and bottom-up. Physical methods rely on the former as they often turn macroscopic material into a nanometric one. These methods are relatively simple, scalable and offer high purity materials, but require large amounts of energy and specific equipment. On the other hand, chemical methods rely on bottom-up approaches, requiring only a precursor salt for the preparation of MNMs along with a reducing agent for the formation of nanomaterials. Chemical methods are versatile regarding equipment, generate more stable nanomaterials and have more control of the product’s size and shape. However, they are characterized by low purity and use of toxic solvents. Due to the environmental impact of these methods, biogenic synthesis has been proposed as an alternative bottom-up method, analogous with chemical synthesis but utilizing biological resources from plants, algae, bacteria, among others as reducing agents to form stable MNMs. Although these methods have their own disadvantages, they utilize renewable resources, are safer, and have comparable physicochemical properties. This review will mainly focus on i. the main biogenic synthesis methods of MNMs, ii. biological resources involved in these methods and iii. the properties of the obtained nanomaterials compared to the MNMs synthesized by conventional methods.

1 Introduction

Nanotechnology consists of the development of particles, materials and/or molecules with at least one dimension on the nanometer scale (between 1 and 100 nm) (Phogat et al., 2018). Nanoparticles (NPs) are the most common nanomaterials (NMs), mainly classified according to their dimensions, which are 0D (all dimensions within nanoscales), 1D (one dimension is larger than nanoscale), 2D (two dimensions are larger than nanoscale) and 3D (three dimensions are larger than nanoscale) (Abid et al., 2021). NPs fabrication with specific morphologies, sizes and shapes has been of interest to sectors (El-Kady et al., 2023) such as agriculture (silver, iron and zinc NPs for the design of fertilizers, fungicides and pesticides) (Aminzai et al., 2024), food (metal organic frameworks for biocatalysis, imaging and sensing contaminants) (Alizadeh Sani et al., 2024) and water (magnetic nanoparticles for wastewater treatment) (Sharma et al., 2024) industries. Metal-based nanomaterials (MNMs) are NMs formed completely or partially of metallic elements (Nazir et al., 2024), with their most important properties being their antioxidant capabilities (Masho et al., 2025), catalytic activity (Cui et al., 2024) and localized surface plasmon resonance (LSPR) (Farooq and Zezell, 2024); however, depending on their elemental composition some of them have other properties such as magnetism/superparamagnetism and antimicrobial activity (Thakur et al., 2022; Yaashikaa and Kumar, 2022). The main synthesis approaches for MNMs are chemical and physical methods, each having different advantages and disadvantages as shown in Table 1.

TABLE 1

Type of synthesisAdvantagesDisadvantages
Chemical methodsHigher cost-effectiveness
Easier control over physicochemical and surface properties
Wider variety of metallic precursors
Require toxic solvents
May require additional purification steps
Prolonged reaction times
Physical methodsHigher purity of materials
More easily scalable for industrial applications
More uniform nanomaterial
Require higher energy input for preparation of nanomaterials
Lower material stability
Higher minimum of particle size

Advantages and disadvantages of physical and chemical nanomaterial synthesis methods.

Physical methods rely on the breakdown of macroscopic materials into NMs and thus require mechanical, thermal and/or radiation approaches (Al-Harbi and Abd-Elrahman, 2024). These methods require high amounts of energy for a consistent fabrication of NMs with specific sizes and shapes (Osterwalder et al., 2006). Milling, for instance, consists of repeated grinding of bulk materials into powders to form NMs, with smaller sizes requiring more energy (Shi and Xie, 2016). Alternatively, chemical methods consist of using organic or inorganic substances to reduce metallic precursors (e.g., AgNO3 or HAuCl4) of a desired MNM (Hachem et al., 2022). Additionally, some of these require a stabilizing or “capping” agent to avoid particle agglomeration and formation of bulk materials (Javed et al., 2020). The advantages of chemical methods include the simplicity of the processes involved, cost-effectiveness, scalability and versatility; however toxic solvents and, in some cases, high temperatures are required for more efficient nanomaterial synthesis (Zhou et al., 2019). For example, MNMs such as silver require solvents such as ethylene glycol, sodium borohydride, sodium citrate and oleyl amine, all of which can have a negative impact either on human health or the environment (Vishwanath and Negi, 2021).

Green chemistry has been proposed to modify conventional synthesis approaches in favor of more environmentally friendly methods (Chopra et al., 2022). As presented in Table 2, the 12 Principles of Green Chemistry are proposed as a framework for alternative chemicals, processes and products, focusing on preventing or treating waste, using safer procedures, less hazardous substances and renewable resources (Anastas and Warner, 2000). From the different approaches based on these principles, biogenic synthesis is worth noting as it focuses on the use of biological resources for the preparation of nanomaterials.

TABLE 2

PrincipleExplanation
PreventionIt is better to prevent waste than to treat or clean up waste after it has been created
Atom economySynthetic methods should be designed to maximize incorporation of all materials used in the process into the final product
Less hazardous chemical synthesisWherever practicable, synthetic methods should be designed to use and generate substances that possess little or no toxicity to human health and the environment
Designing safer chemicalsChemical products should be designed to preserve efficacy of function while reducing toxicity
Safer solvents and auxiliariesThe use of auxiliary substances (e.g., solvents, separation agents, etc.) should be made unnecessary wherever possible and innocuous when used
Design for energy efficiencyEnergy requirements should be recognized for their environmental and economic impacts and should be minimized. Synthetic methods should be conducted at ambient temperature and pressure
Use of renewable feedstockRaw material or feedstock should be renewable rather than depleting whenever technically and economically practicable
Reduce derivativesUnnecessary derivatization (use of blocking groups, protection/deprotection, temporary modification of physical/chemical processes) should be minimized or avoided, if possible, because such steps require additional reagents and can generate waste
CatalysisCatalytic reagents (as selective as possible) are superior to stoichiometric reagents
Design for degradationChemical products should be designed so that at the end of their function they break down into innocuous degradation products and do not persist in the environment
Real-time analysis of pollution preventionAnalytical methodologies need to be further developed to allow for real-time, in-process monitoring and control prior to the formation of hazardous substances
Inherently safer chemistry for accident preventionSubstances and the form of a substance used in a chemical process should be chosen to minimize the potential for chemical accidents, including releases, explosions, and fires

The 12 principles of Green Chemistry by Anastas, P. and Warner (Anastas and Warner, 2000).

Biogenic synthesis of MNMs has recently been proposed as an alternative to conventional methods due to its greener nature as these methods agree with the Principles of Green chemistry (Kumari et al., 2019; Patil and Chandrasekaran, 2020; Huston et al., 2021). Biological components from plants, bacteria, fungi and algae can function as reducing and/or capping agents to produce MNMs, being analogous with chemical synthesis in which a metallic precursor is reduced by a chemical substance (Abbasi et al., 2023). In addition, some biogenic methods involve a reducing agent which may also serve for stabilization due to interactions between biological components and the surface of the MNM, forming a biogenic corona (Guilger-Casagrande and Lima, 2019; Priya et al., 2021).

Like conventional methods, MNMs produced through biogenic synthesis can be used for different applications (Mughal et al., 2021; Kulkarni et al., 2023). For instance, due to their high surface-to-volume ratio, biogenic NMs have been used for optical and electrochemical applications in sensors with low limits of detection and high specificity (Pozzi et al., 2024). Biogenic NMs can have sizes as low as <10nm, allowing them to be used for antimicrobial applications by disrupting integrity of microorganisms (Urnukhsaikhan et al., 2021). Finally, biogenic MNMs have presented catalytic properties for degradation of synthetic dyes in wastewater (Serna-Gallén and Mužina, 2024). This review will focus on the biogenic synthesis routes of metallic and metallic-based nanomaterials, their advantages and disadvantages compared to conventional synthesis methods, properties and applications.

2 Conventional synthesis of nanomaterials

The conventional approaches for synthesis of MNMs are classified top-down and bottom-up, depending on the starting material (Indiarto et al., 2022). Top-down approaches involve physical processes to reduce the size of macroscopic or “bulk” materials, as illustrated in Figure 1. The main methods are mechanical etching, lithography, milling, sputter deposition, sonication, among others (Dash and Panda, 2024). Most of these methods are based on industrial processes and their required specialized equipment (Amina and Guo, 2020).

FIGURE 1

The simplest top-down methods involve mechanical milling, a process where kinetic energy is used to reduce the size of a bulk material (de las Casas and Li, 2012). It is a high capacity, simple and universal approach to synthesize MNMs (Sahu and Park, 2023). However, uncontrolled temperature and pressure may lead to phase transformations of bulk materials (El-Eskandarany et al., 2021). Some methods, such as laser ablation, take advantage of these phase changes to synthesize MNMs, with this technique using a laser beam focused on a metallic bulk material submerged in liquid (Ashikbayeva et al., 2020). This process produces vapor containing metal droplets and/or plasma which react with the liquid phase to produce MNMs (Sportelli et al., 2018).

Conversely, bottom-up approaches rely on the growth and self-assembly of atoms and molecules to form nanomaterials (Kumar et al., 2017). The main chemical and physical processes used in this type of method are chemical reduction reactions, condensation, crystallization or precipitation, requiring much lower energy input compared to top-down approaches (Vinnacombe-Willson et al., 2023). Chemical vapor deposition, co-precipitation, hydrothermal, microemulsion and sol-gel synthesis are among the most common bottom-up methods (Noah, 2020). As shown in Figure 2, bottom-up methods generally consist of three stages: nucleation, growth and termination. During nucleation, metallic ions function as “seeds” which grow by attracting other ions to form MNMs in the growth stage (Soltani et al., 2012). The growth stage continues until the MNM is formed in the termination stage, which occurs depending on the amount of capping agent, also affecting the size, shape and surface chemistry of the nanomaterial (Javed et al., 2022).

FIGURE 2

Chemical vapor deposition (CVD), hydrothermal and co-precipitation methods are some of the most common bottom-up approaches to prepare MNMs. CVD involves the coating of a substrate with a coating of gaseous reactants by heating the substrate in a reaction chamber (Rao et al., 2023). Deposition temperature, pressure and type of substrate are the main factors influencing the quality of CVD (Sabzi et al., 2023). Hydrothermal synthesis consists of a chemical reaction between a metallic precursor and reducing agent in a sealed chamber (e.g., an autoclave) at high temperature (>100 °C) and pressure (>10 MPa), which allows for a higher control of particle size, shape and crystallinity (Satyavani et al., 2016). Finally, MNM synthesis through co-precipitation relies on the simultaneous precipitation of multiple compounds from a solution, generally involving the addition of a base to the metallic precursor solution (Marciello et al., 2016).

Alternative methods have been proposed to address the drawbacks of conventional methods, ideally employing more general laboratory equipment and sustainable resources as reducing and capping agents (Nguyen et al., 2023).

3 Biogenic synthesis: a green bottom-up approach

Biomolecules from bacteria, plants, fungi and algae play a similar role in the formation of MNMs to that of reducing and capping agents in conventional wet chemistry methods, as they reduce metal ions from metallic precursors into zero-valent atoms before the nucleation, growth and termination phases occur (Asmat-Campos et al., 2023). Due to the need to use safer substances for synthesis and preparation of MNMs without losing their purity and homogeneity, biogenic synthesis is considered as an alternative for a more sustainable, economic and less toxic approach (Naseem et al., 2025).

Table 3 presents various types of reducing agents used for the synthesis of MNMs, including metallic and metal oxide nanomaterials. Most biogenic methods use either fruit or plant extracts containing biomolecules such as chlorophyll, ascorbic acids or flavonoids, or microorganisms and their derivatives including bacteria cultures or their extracts containing enzymes and metabolites (Shah et al., 2024). In general, the results yield stable nanomaterials with sizes within 10–100 nm, with shapes depending on the biological material and synthesis conditions used. Although biogenic synthesis allows for the use of different reducing agents, there is not a general synthesis method. Therefore, the synthesis parameters such as reaction temperature, time and reducing agent concentration must be tailored depending on the target MNM. As presented in Table 4, MNMs produced by biogenic methods have been compared to those produced by conventional ones regarding the required synthesis times and temperatures. The main difference between both methods is a slightly lower stability, measured by their zeta potential in suspension. In general, a zeta potential of approximately 30 mV is necessary for nanoparticles to be stable, with the exception being Pt nanomaterials at 20 mV.

TABLE 3

Reducing agentNanomaterialSize (nm) and shapeApplicationRef.
P. emblica Fruit ExtractAg NPs19.8–92.8
Spherical
Inhibition of pathogen Acidovorax oryzae Strain RS-2(Masum et al., 2019)
Capsicum chinense leaf extractAu and Ag NPsAuNPs
16.76 ± 0.32
AgNPs
20.67 ± 0.26
Spherical
Inhibition of S. aureus, E. coli, S. marcescens and E. faecalis(Lomelí-Rosales et al., 2022)
Limonium pruinosum L. Chaz. extractZnO NPs∼41
Hexagonal/cubic
Anti-skin cancer, antimicrobial and antioxidant activity(Naiel et al., 2022)
Prosopis farcta fruit extractZnO NPs40–50
Hexagonal
Cytotoxic and antifungal activity(Miri et al., 2020)
StarchCu2O NPs123–227
Cubic
Electrochemical detection of glucose(Jiménez-Rodríguez et al., 2021)
Fomitopsis pinicolaTiO2 NPs80–120
Spherical
Antibacterial and anticancer activity(Rehman et al., 2020)
Lactobacillus plantarumAg NPs44.7 ± 1.02
Spherical
Antioxidant and antibacterial activities(Prema et al., 2022)
Pseudomonas aeruginosaFe2O3 NPs35–50
Spherical
N/A(Khan et al., 2021)
Krameria sp. Root ExtractCu NPs5.5–7.7 nm
Spherical/Oval shaped
Antioxidant, antibacterial and antifungal activity(Alshammari et al., 2023)
A. marmelos fruit extractFe2O3 NPs70 nm
Spherical
Mitigation of chromium stress and anti-oxidative potential(Zafar et al., 2024)

Reducing agents used for biogenic synthesis of metallic and metal-based nanomaterials.

TABLE 4

MaterialSynthesis methodParticle size (nm)Zeta potential (mV)Synthesis time and temperatureRef
Ag NPsChemical reduction by NaBH410 to 50−30.7 to 45.830 min at 70 °C(Khatoon et al., 2023)
​Synthesis by Morus alba leaf extract10 to 16+37.410 min at 25 °C(Das et al., 2019)
​Bacterial synthesis with supernatants from Brazilian stingless bees8.5 to 25.2−14.69 to -31.7224 h at 25 °C(Santos et al., 2026)
Au NPsChemical reduction by sodium citrate10−40.430 min at 95 °C–100 °C(Kalantari and Turner, 2024)
​Synthesis by pure curcumin10 to 15−36.320 min at 95 °C–100 °C
​AC arc discharge in water5.7 to 8.4−34.6 to −43.52 min at 56 °C, followed by discharge for 5 min at 67 °C(Jankowski et al., 2022)
CuO NPsChemical precipitation∼12+31 to +4610–15 min at 25, 50, 60, 70, 80, and 95 °C(Sallem et al., 2026)
​Synthesis by cell-free extract of Stenotrophomonas sp. BS9543.68−29.4720 min at 121 °C(Talebian et al., 2023)
Pt NPsChemical reduction by NaBH4, stabilized by chitosan3.4−23.82 h at 25 °C(Felicia Aswathy et al., 2024)
​Algal synthesis by Halymenia dilatata15−19.91 h at 60 °C(Sathiyaraj et al., 2021)

Quantitative comparison of conventional and biogenic methods for synthesis of metallic nanomaterials.

Although most biogenic methods required preparation of the respective biogenic compounds, the necessary time and temperature for MNM synthesis are consistent with conventional methods. In addition, their potential applications at the nanoscale are unaffected, as the dimensions of the nanomaterials are within the range of 10–100 nm. The main applications of these nanomaterials derive from their biocompatibility, owed to the reducing agents used for their formation, with antibacterial and anticancer activities being the most common applications. These applications rely on the ability of MNMs to induce oxidative stress by generating reactive oxygen species (ROS), causing DNA damage, protein denaturation and cellular death (Liao et al., 2025).

Briefly, the specific mechanisms of MNMs produced with plant extracts, algae and bacteria are further discussed in the following sections.

3.1 Plant extracts

Plant extracts have been some of the most common resources for biogenic synthesis due to their degradability and safety of use (Alkhulaifi et al., 2020). Leaves, roots, seeds and stems may be used for the preparation of extracts due to their alkaloids, aldehydes, amino acids, flavones, ketones, proteins, phenolics, polysaccharides and vitamins content, which act as reducing or capping agents through a bottom-up approach as presented in Figure 3 (Dikshit et al., 2021). Metal ions are reduced by these biomolecules from the precursor metallic salt into zero-valent metal atoms which aggregate into MNMs until the phytoactive components stabilize the nanomaterial in the termination phase (Shah et al., 2015; Marslin et al., 2018).

FIGURE 3

For instance, phenols contain a hydroxyl group (-OH) connected to an aromatic hydrocarbon. The reaction mechanisms involving these compounds generally involve the formation of intermediate complexes during precursor reduction, which then oxidize to form quinones in tandem with MNMs. Quinones then remain on the surface of MNMs, preventing their aggregation (Bao et al., 2021). Due to also containing hydroxyl groups, flavonoids reduce metallic precursors by a similar mechanism. By providing electrons to reduce metal ions to zero-valent forms, flavonoids are oxidized into ketone groups which then act as capping agents for MNMs (Akhtar et al., 2013). Other compounds present in plant extracts mainly act as capping agents without participating in the reduction of metallic precursors, such as amino acids and proteins. Their hydroxyl, carbonyl and other functional groups allow for binding to the surface of MNMs, creating a stabilizing coating (Cardoso et al., 2025).

In comparison to other biogenic methods, MNMs synthesis with plant extracts does not require culturing or lysing of microorganisms because the reducing agent is obtained directly from a plant component through conventional extraction techniques (Ontong et al., 2020). However, these processes often require toxic solvents, high temperatures and prolonged steps. For example, Ansari, et al. used n-hexane, dichloromethane and sulphuric acid to obtain Azadirachta indica leaf extract through overnight maceration for the synthesis of silver nanoparticles (Ansari et al., 2023). Other drawbacks in extraction methods are the use of high temperatures in Soxhlet extraction, generation of waste products in decoction and prolonged steps for infusion processes (Bitwell et al., 2023). Even though these are considerable disadvantages, extraction methods are simple, robust and generally do not require specialized equipment. For these areas of opportunity, using water as a solvent has been proposed with the technique known as pressurized hot water extraction (PHWE) method (Plaza and Turner, 2015). The principle behind this change is that water is kept in its liquid phase under pressure at temperatures above its boiling point in standard pressure conditions (1 atm), reducing extraction times, costs and the use of toxic substances (Kasapoğlu et al., 2022).

3.2 Algae

Like plant-based methods, synthesis using algae has gained interest due to the biomolecules they contain, such as carbohydrates, nutrients, oils, fatty acids and antioxidants, acting as reducing agents (Metwally et al., 2020; Ashour et al., 2022). Algal synthesis generally consists of three main steps: heating or boiling of an algal extract in a solvent, addition of a metallic precursor followed by incubation of the solution, and finally the extraction of the MNM (Mukherjee et al., 2021). This can be observed in the work of Alarif, et al., who dissolved marine extracts from various algae species in Mili-Q water and heated the solution at 50 °C, followed by addition of titanium (IV) butoxide and incubation for 2 h. After the formation of a gel from the solution, TiO2 nanoparticles were extracted by drying and calcinating the gel (Alarif et al., 2023).

Both intracellular and extracellular methods have been proposed for algal synthesis, with either pathway using the same main components (proteins, polysaccharides, co-enzymes) (Gahlawat and Choudhury, 2019). During intracellular synthesis, nucleation happens when metallic ions in suspension move through the cell surface due to the presence of amino acids, carboxylic acids and phosphates (Shanmuganathan et al., 2018). After passing the cell surface, biomolecules reduce the charge of metal ions to zero-valence, generating the seeds for nucleation (Uzair et al., 2020). The seed then aggregates to form MNMs with varying shapes and sizes before the process being terminated by either the biomolecules themselves or an additional capping agent (Parial and Pal, 2015; AlNadhari et al., 2021).

On the contrary, two approaches exist for extracellular synthesis: the first one is the previously explained process of boiling algal biomass in a solvent to acquire the algal reducing agent containing proteins, enzymes, RNA, DNA, among other biomolecules (Dahoumane et al., 2017); the second approach involves the use of the extracellular matrix (EM) of algae (cell walls, crystalline glycoprotein coverings, proteins and polysaccharides) to reduce metal ions in solution (Luangpipat et al., 2011). Extracellular synthesis offers more control over the nucleation, growth and termination of MNMs as the amount of reducing agent can be quantified and optimized through Design of Experiments (Aboelfetoh et al., 2017). Additionally, the produced MNMs can be more easily recovered and purified without the removal of excessive biological debris. However, the process is more complex compared to intracellular synthesis as the algal biomass must be recovered, washed and homogenized before acquiring the reducing agent (Corrêa et al., 2021).

Even though algae contain many secondary metabolites capable of reducing metallic precursors, the study of their mechanisms and optimization is not as advanced compared to conventional bottom-up synthesis methods (Premarathna et al., 2024). The challenges for a widespread use of this method are a lack of scalability as the formation of MNMs is relatively slow, even requiring days, has a variable yield, purity and particle size. Compared to conventional methods and like other green approaches, algal synthesis requires further study (Hamida et al., 2023).

3.3 Bacteria

Bacteria have developed defense mechanisms involving oxidation and reduction reactions by enzymes and metabolites against metallic materials due to their inherent toxicity (Slavin et al., 2017). Because of these enzymes and metabolites, bacteria have been proposed to prepare MNMs from metallic precursors by both intracellular and extracellular approaches (Lahiri et al., 2021). Extracellular synthesis occurs either on the outer surface of cells or using enzymes and metabolites extracted from within bacterial cells, while intracellular synthesis happens within bacterial cells (Alfryyan et al., 2022).

The main enzymes responsible in both mechanisms are known as reductases. These transfer electrons from donors (e.g., NADH) to dissolved metal ions from metallic precursors, converting them to zero-valent nanoparticles (Iravani and Varma, 2020). In extracellular synthesis, bacteria secrete these enzymes into their surrounding environment, which interact with metal ions along with functional groups on the bacterial cell wall. Alternatively, cell lysates may be produced from bacterial culture, allowing for harvesting of the reductases (Gahlawat and Choudhury, 2019). For intracellular synthesis processes, metal ions are transported into the cytoplasm by transport proteins, in which the reduction process occurs. However, cell lysis and purification steps are required to obtain pure MNMs, increasing the experimental complexity of the process (Alfryyan et al., 2022). Because of the previously mentioned mechanisms, in general bacterial synthesis does not require hazardous reagents used in conventional bottom-up approaches to reduce metallic precursors, as presented in Figure 4.

FIGURE 4

In addition, other biomolecules (proteins, lipids and peptides) present in bacteria regulate the surface charge of MNMs as well as other properties such as biocompatibility, stability, particle size and size distribution (Kathirvel et al., 2023). This process has been previously explained for synthesis by plant extracts, consisting of the formation of a stabilizing coating by these biomolecules.

Even though bacterial synthesis includes the use of sustainable resources, making it suitable for long-term production of MNMs, certain aspects must be addressed. Few studies have focused on the quantitative optimization for control of size and size distribution, leading to unpredictability and hindering potential industrial scalability (Pantidos and Horsfall, 2014). Finally, due to bacterial synthesis relying on the use of biomass for reduction and capping of MNMs, biomass purification techniques are required, extending the process.

4 Physicochemical properties of biogenic-produced metal-based nanomaterials

The physicochemical properties of nanomaterials are mainly divided into intrinsic and extrinsic properties. Intrinsic properties are related to the nanomaterial itself, including chemical composition, particle size, size distribution, shape and surface area (Chen et al., 2020). Conversely, extrinsic properties are related to the interactions of the nanomaterial with its environment and other molecules; these include surface charge, zeta potential and colloidal stability (Mancardi et al., 2023). Specifically, for MNMs, surface plasmon resonance and catalytic activity are the most important intrinsic properties to define their applications, while colloidal stability and agglomeration are the main extrinsic properties to consider (Farkaš and de Leeuw, 2021).

In addition, the main advantage of biogenic nanomaterials relies on their inherent biocompatibility compared to conventionally synthesized nanomaterials (Kyriakides et al., 2021). An organic layer or biogenic corona is formed on the surface of the MNM by the biomolecules used for synthesis, maintaining stability and preventing agglomeration of the nanomaterials. This same corona affects the previously mentioned properties, either hindering or enhancing the potential use of the MNMs for specific applications, as will be discussed shortly (Suárez Priede et al., 2026).

In brief, the properties of metallic nanomaterials prepared by biogenic methods will be discussed, along with their potential implementations.

4.1 Localized surface plasmon resonance

Localized surface plasmon resonance (LSPR) is an optical property which occurs by the interaction of conducting electrons and incident photons on a MNM, causing a resonance effect throughout the electrons on the surface (Kosuda et al., 2016; Zhao et al., 2021). The incident photons from a light source at a specific angle couple through the metal surface causing the excitation of electrons, which then propagate in parallel as illustrated in Figure 5. Consequently, plasma oscillation occurs, generating an electric field with a range of approximately 300 nm between the metal surface and a sample solution containing an analyte which interacts with the metallic surface (Mayer and Hafner, 2011).

FIGURE 5

Surface plasmon resonance of metallic nanomaterials is identified by measuring absorption peaks usually within the UV-Visible spectrum. In general, both chemical and biogenic synthesis methods are used to produce stable nanoparticles with low polydispersity. However, the biomolecules used for biogenic synthesis may cause the formation of MNMs of larger particle sizes with different morphologies compared to the spherical nanoparticles produced by chemical methods (Metz et al., 2015). This leads to broader, less defined, blue-shifted absorption peaks relative to the expected LSPR range of each metallic species. As presented in the work of Noguti, et al., fungal (Aspergillus niger) mediated synthesis of silver nanoparticles was compared to an optimized chemical method (NaBH4 and CMC) regarding their LSPR range. Absorption peaks for biogenic MNMs were observed between 400–500 nm with extended absorption tails between 500 and 800 nm, representing the formation of spherical silver nanoparticles in combination with non-spherical particles, as previously discussed. Increasing the concentration of fungal biomass led to a higher proportion of spherical nanoparticles, closer to the results for chemically synthesized nanoparticles (Noguti et al., 2025).

Because of this intrinsic property, MNMs present characteristics such as electromagnetic (EM) field enhancement, high photothermal efficiency and spectral response. EM field enhancement has been studied both theoretically through COMSOL Multiphysics (Saini et al., 2023) and experimentally using surface-enhanced Raman Scattering (SERS) in silver nanoparticles (Hossain et al., 2022). Photothermal efficiency has been studied by Zinoune et al. (2023) on gold nanoparticles, identifying an increase in efficiency related directly to nanoparticle size with 5, 40, 60 and 80 nm NPs. These conclusions regarding the direct relationship between particle size and photothermal efficiency have been confirmed in the work of Depciuch et al. (2022) with theoretical and experimental studies on AuNPs. Finally, spectral response has been studied by Wang et al. (2023), presenting a direct relationship between the addition of silver nanoparticles, absorption and broadband spectral range from the visible to near-infrared region, making MNMs suitable for imaging, sensing and optical applications.

In addition to the previously mentioned applications, the most common implementation of LSPR is in biosensors. After a liquid medium containing a biomolecule is added to the metallic surface of the sensor, a change in the refractive index occurs, causing a change in electromagnetic resonance which can be related to the amount of analyte present in the sample (Zhou and Geng, 2024). Biogenic nanomaterials have been implemented for this, presenting a performance (measured by their sensitivity) comparable to nanomaterials obtained through conventional methods. For example, Varghese, et al. prepared AgNPs with plant extracts and studied their LSPR sensitivity (Varghese Alex et al., 2020); compared to the works of Kamakshi et al. (2018) and Serra et al. (2009), who prepared AgNPs through conventional methods, a higher sensitivity of 39.1 nm/mM was observed compared to 7.4 nm/mM and 14.8 nm/mM, respectively. A similar case is observed in the work of Ashikbayeva, et al. who prepared AuNPs with a green tea extract for application in an optical fiber biosensor, showing a 25-fold increase in sensitivity compared to a biofunctionalized APTMS sensor (Ashikbayeva et al., 2023).

4.2 Catalytic activity

Catalytic activity is the property of a substance by which it increases the rate of a chemical reaction without participating in its stoichiometry (Astruc, 2020). Due to their high surface-to-volume ratio and amount of available active sites compared to bulk metallic materials, biogenic MNMs have been proposed as catalysts (Ali et al., 2019). Metallic NPs are the most studied nanoscale catalysts because of their chemical stability and recyclability. Gold, palladium, platinum and silver are the most common pure noble metals used for these applications along with metal oxides such as Al2O3, CuxO and TiO2 (Bathla et al., 2022; Saha et al., 2024). Catalytic activity has a direct relationship with the size and uniformity of a nanoparticle; therefore, control of size, morphology and surface structure is important for optimizing catalytic properties (Quan et al., 2023).

Specifically for biogenic MNMs, there are additional considerations regarding their particle size and uniformity. As previously discussed, their morphological variety, even within the same sample, influences their catalytic activity, as the biogenic corona may increase this heterogeneity compared to MNMs synthesized by conventional methods. Although most studies have reported an increase in catalytic activity for biogenic nanomaterials (Xiong et al., 2018), others have highlighted that the biogenic corona can hinder this property by blocking the active sites of the metal surface. This effect has been particularly observed in Pd nanoparticles as presented in the work of Metz, et al., reporting no catalytic activity after using coffee as a reducing agent. This work concludes by suggesting the quantification and further study of the biogenic sources used as reducing and capping agents before their implementation for catalytic applications, compared to conventional synthesis methods (Metz et al., 2015).

The main application of catalytic MNMs obtained through biogenic synthesis methods are for degradation of organic pollutants in water. For example, silver and gold nanoparticles have been proposed for the degradation of synthetic dyes such as rhodamine B, methylene blue, Congo red and methyl red. As presented in the work of Deokar G. et al. (2023), catalytic gold nanoparticles were engineered using banana peel extract as a reducing agent (Deokar and Ingale, 2023). These NPs were used to degrade rhodamine B, Congo red, methyl orange and methylene blue by catalyzing the reactions between these dyes and sodium borohydride (NaBH4). As shown in Figure 6, the dye reduction process consists of an electron transfer between a donor and an acceptor molecule; in this case, BH4− acting as electron donor while the dyes act as electron acceptors and nanoparticles as catalysts, providing a contact surface for the dyes and NaBH4 to adsorb (Hashemi Salehi et al., 2019; Mehra et al., 2023).

FIGURE 6

4.3 Colloidal stability and agglomeration

Colloidal stability refers to the ability of a particle to resist changes in size by preventing agglomeration or aggregation (Zhu et al., 2020). Agglomeration happens when nanoparticles assemble due to attractive forces (e.g., van der Waals forces, electrostatic interactions) and low thermodynamic stability, causing NPs to aggregate with each other and separate from the liquid medium where they are placed (Morán et al., 2023). These reduce the potential use of MNMs for applications relying on their high surface-to-volume ratio, reducing the contact surface for the different mechanisms necessary for these applications (Vollath, 2020). For instance, Gong et al. (2024) prepared Au@SiO2@C composite nanoparticles for LSPR applications for evaluation of the effect of agglomeration on their solar spectral weighted absorption efficiency, observing a decrease of 3.57%, 4.19%, 22.21% and 28.89% in 4 increasing levels of agglomeration, respectively (Gong et al., 2024).

The composition of the biogenic corona surrounding the MNM depends on the biogenic source used for its synthesis. The main cause for their colloidal stability are the long chain biomolecules on the surface of the nanoparticle, causing steric hindrance and preventing aggregation that may occur due to van der Waals forces (Piacenza et al., 2018). In addition to this, the functional groups (-COO-, -OH, -NH2) on these biomolecules ionize in solution, causing a strong surface charge on the nanoparticles known as electrostatic stabilization. These two effects work in tandem on biogenic nanoparticles, causing an effect known as electrosteric stabilization. Due to the biogenic corona acting as both a steric barrier and a charge source, electrostatic stabilization is stronger than its parts (Asserzhanov et al., 2026).

In accordance with colloidal stability, surface area and energy have an inverse relationship with particle size, causing an increase in agglomeration at smaller nanomaterial sizes (Alshora et al., 2016). This agglomeration can be reduced with a capping agent coating the surface of a nanomaterial, causing a steric effect depending on the physicochemical properties and concentration of the capping agent (Li et al., 2013). Jiménez-Rodríguez et al. (2021) proposed the use of biomolecules such as starch to synthesize and stabilize Cu2O nanocubes (Jiménez-Rodríguez et al., 2021). Different amounts of 1% w/v starch solution (0, 0.2, 1 and 5 mL) were used, observing after 72 h a higher colloidal stability on samples with higher starch concentrations. Although capping agent concentration has a direct relationship with colloidal stability, an excess can hinder the reactivity of a nanomaterial; therefore, each nanomaterial synthesis may require different optimization of this concentration (Campisi et al., 2016).

5 Conclusions and future perspectives

Conventional metallic nanomaterial synthesis through top-down and bottom-up approaches have a widespread use due to their reliability; however, they often require toxic substances or high energy input for consistent MNM synthesis. Due to this, green synthesis approaches, particularly biogenic synthesis, have been proposed as an alternative due to several areas of opportunity they address: no specialized equipment is required, lower temperatures may be used for synthesis and reducing agents in conventional methods can be replaced with biomolecules from algae, bacteria, plant extracts, among others. However, further studies of these methods are required for a better understanding of the mechanisms responsible for MNMs synthesis.

As is the case with MNMs prepared with conventional synthesis methods, the applications of biogenic MNMs depend on their physicochemical properties such as high surface-to volume area, localized surface plasmon resonance (LSPR) and adsorption determined by their particle size, size distribution, shape and morphology. Furthermore, the main applications based on these properties are drug delivery, catalytic, sensing and biosensing; however, optimization methods must be proposed for biogenic synthesis to have a more widespread use comparable to conventional synthesis methods.

Statements

Author contributions

JFF-O: Formal Analysis, Writing – original draft, Validation, Visualization, Conceptualization. AMR-P: Validation, Conceptualization, Supervision, Writing – review and editing. OA: Supervision, Conceptualization, Validation, Writing – review and editing.

Funding

The author(s) declared that financial support was not received for this work and/or its publication.

Conflict of interest

The author(s) declared that this work was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Generative AI statement

The author(s) declared that generative AI was not used in the creation of this manuscript.

Any alternative text (alt text) provided alongside figures in this article has been generated by Frontiers with the support of artificial intelligence and reasonable efforts have been made to ensure accuracy, including review by the authors wherever possible. If you identify any issues, please contact us.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

References

  • 1

    AbbasiT.AbbasiS. A.RajalakshmiR.PatnaikP.AbbasiT. (2023). Biomimetic synthesis of nanoparticles: state-of-the-art. Nat. Environ. Pollut. Technol.22, 593–608. 10.46488/NEPT.2023.v22i02.005

  • 2

    AbidA. M.ShujaitS.ChaudharyK.IkramM.ImranM.HaiderJ.et al (2021). Synthesis of nanomaterials using various top-down and bottom-up approaches, influencing factors, advantages, and disadvantages: a review. Adv. Colloid Interface Sci.300, 102597. 10.1016/j.cis.2021.102597

  • 3

    AboelfetohE. F.El-ShenodyR. A.GhobaraM. M. (2017). Eco-friendly synthesis of silver nanoparticles using green algae (Caulerpa serrulata): reaction optimization, catalytic and antibacterial activities. Environ. Monit. Assess.189, 349. 10.1007/s10661-017-6033-0

  • 4

    AkhtarM. S.PanwarJ.YunY.-S. (2013). Biogenic synthesis of metallic nanoparticles by plant extracts. ACS Sustain. Chem. Eng.1, 591–602. 10.1021/sc300118u

  • 5

    Al-HarbiN.Abd-ElrahmanN. K. (2024). Physical methods for preparation of nanomaterials, their characterization and applications: a review. J. Umm Al-Qura Univ. Appl. Sci.11, 356–377. 10.1007/s43994-024-00165-7

  • 6

    AlarifW. M.ShabanY. A.OrifM. I.GhandourahM. A.TurkiA. J.AlorfiH. S.et al (2023). Green synthesis of TiO(2) nanoparticles using natural marine extracts for antifouling activity. Mar. Drugs21, 62. 10.3390/md21020062

  • 7

    AlfryyanN.KordyM. G. M.Abdel-GabbarM.SolimanH. A.ShabanM. (2022). Characterization of the biosynthesized intracellular and extracellular plasmonic silver nanoparticles using Bacillus cereus and their catalytic reduction of methylene blue. Sci. Rep.12, 12495. 10.1038/s41598-022-16029-1

  • 8

    AliI.PengC.Mahmood KhanZ.NazI.SultanM.AliM.et al (2019). Overview of microbes based fabricated biogenic nanoparticles for water and wastewater treatment. J. Environ. Manage.230, 128–150. 10.1016/j.jenvman.2018.09.073

  • 9

    Alizadeh SaniM.Jahed-KhanikiG.ShariatifarN.KhezerlouA.AbediniA.Rezvani-GhalhariM.et al (2024). Metal organic frameworks (MOFs) as advanced functional materials for food applications. ACS Food Sci. Technol.4, 2272–2300. 10.1021/acsfoodscitech.4c00354

  • 10

    AlkhulaifiM. M.AlshehriJ. H.AlwehaibiM. A.AwadM. A.Al-EnaziN. M.AldosariN. S.et al (2020). Green synthesis of silver nanoparticles using Citrus limon peels and evaluation of their antibacterial and cytotoxic properties. Saudi J. Biol. Sci.27, 3434–3441. 10.1016/j.sjbs.2020.09.031

  • 11

    AlNadhariS.Al-EnaziN. M.AlshehreiF.AmeenF. (2021). A review on biogenic synthesis of metal nanoparticles using marine algae and its applications. Environ. Res.194, 110672. 10.1016/j.envres.2020.110672

  • 12

    AlshammariS. O.MahmoudS. Y.FarragE. S. (2023). Synthesis of green copper nanoparticles using medicinal plant krameria sp. root extract and its applications. Molecules28, 4629. 10.3390/molecules28124629

  • 13

    AlshoraD. H.IbrahimM. A.AlanaziF. K. (2016). Chapter 6 - nanotechnology from particle size reduction to enhancing aqueous solubility. Appl. Nanobiomater.163–191. 10.1016/B978-0-323-42861-3.00006-6

  • 14

    AminaS. J.GuoB. (2020). A review on the synthesis and functionalization of gold nanoparticles as a drug delivery vehicle. Int. J. Nanomedicine15, 9823–9857. 10.2147/IJN.S279094

  • 15

    AminzaiM. T.YildirimM.YabalakE. (2024). Metallic nanoparticles unveiled: synthesis, characterization, and their environmental, medicinal, and agricultural applications. Talanta280, 126790. 10.1016/j.talanta.2024.126790

  • 16

    AnastasP. T.WarnerJ. C. (2000). Green Chemistry: Theory and Practice. 10.1093/oso/9780198506980.001.0001

  • 17

    AnsariM.AhmedS.AbbasiA.KhanM. T.SubhanM.BukhariN. A.et al (2023). Plant mediated fabrication of silver nanoparticles, process optimization, and impact on tomato plant. Sci. Rep.13, 18048. 10.1038/s41598-023-45038-x

  • 18

    AshikbayevaZ.AitkulovA.JelbuldinaM.IssatayevaA.BeisenovaA.MolardiC.et al (2020). Distributed 2D temperature sensing during nanoparticles assisted laser ablation by means of high-scattering fiber sensors. Sci. Rep.10, 12593. 10.1038/s41598-020-69384-2

  • 19

    AshikbayevaZ.BekmurzayevaA.MyrkhiyevaZ.AssylbekovaN.AtabaevT.Sh.TosiD. (2023). Green-synthesized gold nanoparticle-based optical fiber ball resonator biosensor for cancer biomarker detection. Opt. Laser Technol.161, 109136. 10.1016/j.optlastec.2023.109136

  • 20

    AshourM.AlprolA. E.KhedawyM.AbualnajaK. M.MansourA. T. (2022). Equilibrium and kinetic modeling of crystal violet dye adsorption by a marine diatom, skeletonema costatum. Materials15, 6375. 10.3390/ma15186375

  • 21

    Asmat-CamposD.Rojas-JaimesJ.de Oca-VásquezG. M.Nazario-NavedaR.Delfín-NarcisoD.Juárez-CortijoL.et al (2023). Biogenic production of silver, zinc oxide, and cuprous oxide nanoparticles, and their impregnation into textiles with antiviral activity against SARS-CoV-2. Sci. Rep.13, 9772. 10.1038/s41598-023-36910-x

  • 22

    AsserzhanovD. K.GrachevV.HornokV.KlivenkoA. N.AbdullinaE. S.KassymovaZ. S.et al (2026). Electrosteric forces drive the stability and antibacterial function of polysaccharide-stabilized silver nanoparticles. J. Mol. Liq.441, 129034. 10.1016/j.molliq.2025.129034

  • 23

    AstrucD. (2020). Introduction: nanoparticles in catalysis. Chem. Rev.120, 461–463. 10.1021/acs.chemrev.8b00696

  • 24

    BaoY.HeJ.SongK.GuoJ.ZhouX.LiuS. (2021). Plant-extract-mediated synthesis of metal nanoparticles. J. Chem.2021, 1–14. 10.1155/2021/6562687

  • 25

    BathlaA.VikrantK.KukkarD.KimK.-H. (2022). Photocatalytic degradation of gaseous benzene using metal oxide nanocomposites. Adv. Colloid Interface Sci.305, 102696. 10.1016/j.cis.2022.102696

  • 26

    BitwellC.IndraS. S.LukeC.KakomaM. K. (2023). A review of modern and conventional extraction techniques and their applications for extracting phytochemicals from plants. Sci. Afr.19, e01585. 10.1016/j.sciaf.2023.e01585

  • 27

    CampisiS.SchiavoniM.Chan-ThawC. E.VillaA. (2016). Untangling the role of the capping agent in nanocatalysis: recent advances and perspectives. Catalysts6, 185. 10.3390/catal6120185

  • 28

    CardosoB.NobregaG.AfonsoI. S.RibeiroJ. E.LimaR. A. (2025). Sustainable green synthesis of metallic nanoparticle using plants and microorganisms: a review of biosynthesis methods, mechanisms, toxicity, and applications. J. Environ. Chem. Eng.13, 116921. 10.1016/j.jece.2025.116921

  • 29

    ChenL.LiuZ.GuoZ.HuangX.-J. (2020). Regulation of intrinsic physicochemical properties of metal oxide nanomaterials for energy conversion and environmental detection applications. J. Mat. Chem. A Mater8, 17326–17359. 10.1039/D0TA05539E

  • 30

    ChopraH.BibiS.SinghI.HasanM. M.KhanM. S.YousafiQ.et al (2022). Green metallic nanoparticles: biosynthesis to applications. Front. Bioeng. Biotechnol.10, 874742. 10.3389/fbioe.2022.874742

  • 31

    CorrêaP. S.Morais JúniorW. G.MartinsA. A.CaetanoN. S.MataT. M. (2021). Microalgae biomolecules: extraction, separation and purification methods. Processes9, 10. 10.3390/pr9010010

  • 32

    CuiM.XuB.WangL. (2024). Recent advances in multi-metallic-based nanozymes for enhanced catalytic cancer therapy. BMEMat2, e12043. 10.1002/bmm2.12043

  • 33

    DahoumaneS. A.MechouetM.WijesekeraK.FilipeC. D. M.SicardC.BazylinskiD. A.et al (2017). Algae-mediated biosynthesis of inorganic nanomaterials as a promising route in nanobiotechnology – a review. Green Chem.19, 552–587. 10.1039/C6GC02346K

  • 34

    DasD.GhoshR.MandalP. (2019). Biogenic synthesis of silver nanoparticles using S1 genotype of Morus alba leaf extract: characterization, antimicrobial and antioxidant potential assessment. SN Appl. Sci.1, 498. 10.1007/s42452-019-0527-z

  • 35

    DashP.PandaP. K. (2024). “Top-down strategies synthesis of 2D nanomaterial. in 2D Nanomaterials, 1–16. 10.1002/9781394167883.ch1

  • 36

    de las CasasC.LiW. (2012). A review of application of carbon nanotubes for lithium ion battery anode material. J. Power Sources208, 74–85. 10.1016/j.jpowsour.2012.02.013

  • 37

    DeokarG. K.IngaleA. G. (2023). Exploring effective catalytic degradation of organic pollutant dyes using environment benign, green engineered gold nanoparticles. Inorg. Chem. Commun.151, 110649. 10.1016/j.inoche.2023.110649

  • 38

    DepciuchJ.StecM.MaximienkoA.BaranJ.Parlinska-WojtanM. (2022). Size-dependent theoretical and experimental photothermal conversion efficiency of spherical gold nanoparticles. Photodiagnosis Photodyn. Ther.39, 102979. 10.1016/j.pdpdt.2022.102979

  • 39

    DikshitJ.DasA. K.SadhuS.SharmaS.SinghS.GuptaP. K.et al (2021). Green synthesis of metallic nanoparticles: applications and limitations. Catalysts11, 902–NA. 10.3390/catal11080902

  • 40

    El-EskandaranyM. S.Al-HazzaA.Al-HajjiL. A.AliN.Al-DuweeshA. A.BanyanM.et al (2021). Mechanical milling: a superior nanotechnological tool for fabrication of nanocrystalline and Nanocomposite materials. Nanomaterials11, 2484. 10.3390/nano11102484

  • 41

    El-KadyM. M.AnsariI.AroraC.RaiN.SoniS.VermaD. K.et al (2023). Nanomaterials: a comprehensive review of applications, toxicity, impact, and fate to environment. J. Mol. Liq.370, 121046. 10.1016/j.molliq.2022.121046

  • 42

    FarkašB.de LeeuwN. H. (2021). A perspective on Modelling metallic magnetic nanoparticles in biomedicine: from monometals to nanoalloys and ligand-protected particles. Materials14, 3611. 10.3390/ma14133611

  • 43

    FarooqS.ZezellD. M. (2024). Advances in metallic-based localized surface plasmon sensors for enhanced tropical disease detection: a comprehensive review. Plasmonics19, 1721–1742. 10.1007/s11468-023-02109-z

  • 44

    Felicia AswathyW.JoseJ.AnilaE. I. (2024). Chitosan stabilized platinum nanoparticles: synthesis, characterization and cytotoxic impacts on human breast cancer cells. Mat. Chem. Phys.326, 129864. 10.1016/j.matchemphys.2024.129864

  • 45

    GahlawatG.ChoudhuryA. R. (2019). A review on the biosynthesis of metal and metal salt nanoparticles by microbes. RSC Adv.9, 12944–12967. 10.1039/C8RA10483B

  • 46

    GongH.MaX.MengS.WangB.CuiZ. (2024). Study on the influence of the agglomeration effect of composite nanoparticles on the photothermal properties of nanofluids. Sol. Energy270, 112406. 10.1016/j.solener.2024.112406

  • 47

    Guilger-CasagrandeM.LimaR. (2019). Synthesis of silver nanoparticles mediated by fungi: a review. Front. Bioeng. Biotechnol.7, 287. 10.3389/fbioe.2019.00287

  • 48

    HachemK.AnsariM. J.SalehR. O.KzarH. H.Al-GazallyM. E.AltimariU. S.et al (2022). Methods of chemical synthesis in the synthesis of nanomaterial and nanoparticles by the chemical deposition method: a review. Bionanoscience12, 1032–1057. 10.1007/s12668-022-00996-w

  • 49

    HamidaR. S.AliM. A.AlkhateebM. A.AlfassamH. E.MomenahM. A.Bin-MeferijM. M. (2023). Algal-derived synthesis of silver nanoparticles using the unicellular ulvophyte sp. MBIC10591: optimisation, characterisation, and biological activities. Molecules28, 279. 10.3390/molecules28010279

  • 50

    Hashemi SalehiM.YousefiM.HekmatiM.BalaliE. (2019). Application of palladium nanoparticle-decorated extract-modified graphene oxide for highly active catalytic reduction of methylene blue, methyl orange and rhodamine B. Appl. Organomet. Chem.33, e5123. 10.1002/aoc.5123

  • 51

    HossainM. K.DrmoshQ. A.ArifuzzamanM. (2022). Silver nanoparticles, nanoneedles and nanorings: impact of electromagnetic near-field on surface-enhanced Raman scattering. Phys. Chem. Chem. Phys.24, 8787–8799. 10.1039/D1CP05681F

  • 52

    HustonM.DeBellaM.DiBellaM.GuptaA. (2021). Green synthesis of nanomaterials. Nanomaterials11, 2130. 10.3390/nano11082130

  • 53

    IndiartoR.IndrianaL.AndoyoR.SubrotoE.NurhadiB. (2022). Bottom–up nanoparticle synthesis: a review of techniques, polyphenol-based core materials, and their properties. Eur. Food Res. Technol.248, 1–24. 10.1007/s00217-021-03867-y

  • 54

    IravaniS.VarmaR. S. (2020). Bacteria in heavy metal remediation and nanoparticle biosynthesis. ACS Sustain. Chem. Eng.8, 5395–5409. 10.1021/acssuschemeng.0c00292

  • 55

    JankowskiK.JabłońskaJ.UznańskiP.CałuchS.SzybowiczM.BrzozowskiR.et al (2022). Necked gold nanoparticles prepared by submerged alternating current arc discharge in water. RSC Adv.12, 33955–33963. 10.1039/D2RA06050G

  • 56

    JavedR.ZiaM.NazS.AisidaS. O.AinN.AoQ. (2020). Role of capping agents in the application of nanoparticles in biomedicine and environmental remediation: recent trends and future prospects. J. Nanobiotechnology18, 172. 10.1186/s12951-020-00704-4

  • 57

    JavedR.SajjadA.NazS.SajjadH.AoQ. (2022). Significance of capping agents of colloidal nanoparticles from the perspective of drug and gene delivery, bioimaging, and biosensing: an insight. Int. J. Mol. Sci.23, 10521. 10.3390/ijms231810521

  • 58

    Jiménez-RodríguezA.SoteloE.MartínezL.HuttelY.GonzálezM. U.MayoralA.et al (2021). Green synthesis of starch-capped Cu2O nanocubes and their application in the direct electrochemical detection of glucose. RSC Adv.11, 13711–13721. 10.1039/D0RA10054D

  • 59

    KalantariH.TurnerR. J. (2024). Structural and antimicrobial properties of synthesized gold nanoparticles using biological and chemical approaches. Front. Chem.12. 10.3389/fchem.2024.1482102

  • 60

    KamakshiK.SilvaJ. P. B.SekharK. C.Agostinho MoreiraJ.AlmeidaA.PereiraM.et al (2018). Substrate temperature effect on microstructure, optical, and glucose sensing characteristics of pulsed laser deposited silver nanoparticles. Plasmonics13, 1235–1241. 10.1007/s11468-017-0625-y

  • 61

    KasapoğluK. N.DemircanE.Gültekin-ÖzgüvenM.KrugerJ.FrankJ.ArslanerA.et al (2022). Recovery of polyphenols using pressurized hot water extraction (PHWE) from black rosehip followed by encapsulation for increased bioaccessibility and antioxidant activity. Molecules27, 6807. 10.3390/molecules27206807

  • 62

    KathirvelP.KandasamyG. D.PalanisamyM. (2023). Biosynthesis of Metal Nanoparticles Using Bacterial Metabolites and Their Applications BT - Applications of Nanotechnology in Microbiology. (Cham: Springer Nature Switzerland) 1–40. 10.1007/978-3-031-49933-3_1

  • 63

    KhanA. A.KhanS.KhanS.RentschlerS.LauferS.DeignerH. P. (2021). Biosynthesis of iron oxide magnetic nanoparticles using clinically isolated Pseudomonas aeruginosa. Sci. Rep.11, 20503. 10.1038/s41598-021-99814-8

  • 64

    KhatoonU. T.VelidandiA.Nageswara RaoG. V. S. (2023). Sodium borohydride mediated synthesis of nano-sized silver particles: their characterization, anti-microbial and cytotoxicity studies. Mat. Chem. Phys.294, 126997. 10.1016/j.matchemphys.2022.126997

  • 65

    KosudaK. M.BinghamJ. M.WustholzK. L.Van DuyneR. P.GroarkeR. J. (2016). Nanostructures and surface-enhanced Raman spectroscopy. Reference Module in Materials Science and Materials Engineering eds. AndrewsD. L.LipsonR. H. (Oxford: Academic Press), 117–152. 10.1016/B978-0-12-803581-8.00611-1

  • 66

    KulkarniD.SherkarR.ShirsatheC.SonwaneR.VarpeN.ShelkeS.et al (2023). Biofabrication of nanoparticles: sources, synthesis, and biomedical applications. Front. Bioeng. Biotechnol.11, 1159193. 10.3389/fbioe.2023.1159193

  • 67

    KumarS.BhushanP.BhattacharyaS. (2017). Fabrication of nanostructures with bottom-up approach and their utility in diagnostics, therapeutics, and others. Environ. Chem. Med. Sensors, 167–198. 10.1007/978-981-10-7751-7_8

  • 68

    KumariS.TyagiM.JagadevanS. (2019). Mechanistic removal of environmental contaminants using biogenic nano-materials. Int. J. Environ. Sci. Technol.16, 7591–7606. 10.1007/s13762-019-02468-3

  • 69

    KyriakidesT. R.RajA.TsengT. H.XiaoH.NguyenR.MohammedF. S.et al (2021). Biocompatibility of nanomaterials and their immunological properties. Biomed. Mater.16, 042005. 10.1088/1748-605X/abe5fa

  • 70

    LahiriD.NagM.SheikhH. I.SarkarT.EdinurH. A.PatiS.et al (2021). Microbiologically-synthesized nanoparticles and their role in silencing the biofilm signaling cascade. Front. Microbiol.12, 636588. 10.3389/fmicb.2021.636588

  • 71

    LiC.-C.ChangS.-J.SuF.-J.LinS.-W.ChouY.-C. (2013). Effects of capping agents on the dispersion of silver nanoparticles. Colloids Surf. A Physicochem. Eng. Asp.419, 209–215. 10.1016/j.colsurfa.2012.11.077

  • 72

    LiaoY.WangX.ChenP.ZhongQ.GongJ. (2025). Antimicrobial mechanisms of metal-based nanomaterials. Int. J. Nanomedicine20, 12879–12887. 10.2147/IJN.S557649

  • 73

    Lomelí-RosalesD. A.Zamudio-OjedaA.Reyes-MaldonadoO. K.López-ReyesM. E.Basulto-PadillaG. C.Lopez-NaranjoE. J.et al (2022). Green synthesis of gold and silver nanoparticles using leaf extract of capsicum chinense plant. Molecules27, 1692. 10.3390/molecules27051692

  • 74

    LuangpipatT.BeattieI. R.ChistiY.HaverkampR. G. (2011). Gold nanoparticles produced in a microalga. J. Nanoparticle Res.13, 6439–6445. 10.1007/s11051-011-0397-9

  • 75

    MancardiG.MikolajczykA.AnnapooraniV. K.BahlA.BlekosK.BurkJ.et al (2023). A computational view on nanomaterial intrinsic and extrinsic features for nanosafety and sustainability. Mater. Today67, 344–370. 10.1016/j.mattod.2023.05.029

  • 76

    MarcielloM.LuengoY.MoralesP. (2016). 24 - iron oxide nanoparticles for cancer diagnosis and therapy. eds. HolbanA. M.GrumezescuD. T. (William Andrew Publishing) 667–694. 10.1016/B978-0-323-47347-7.00024-0

  • 77

    MarslinG.SiramK.MaqboolQ.SelvakesavanR. K.KruszkaD.KachlickiP.et al (2018). Secondary metabolites in the green synthesis of metallic nanoparticles. Materials11, 940. 10.3390/ma11060940

  • 78

    MashoT. J.AyaneM. M.EndaleG. N.AdulaS. H.NegasaY. D.LikasaB. W.et al (2025). Biosynthesis, characterization of Ag2O nanoparticles for enhancement of antioxidant and photo degradation activities. Results Chem.13, 101919. 10.1016/j.rechem.2024.101919

  • 79

    MasumMd. M. I.SiddiqaM. M.AliK. A.ZhangY.AbdallahY.IbrahimE.et al (2019). Biogenic synthesis of silver nanoparticles using Phyllanthus emblica fruit extract and its inhibitory action against the pathogen acidovorax oryzae strain RS-2 of rice bacterial Brown stripe. Front. Microbiol.10, 820. 10.3389/fmicb.2019.00820

  • 80

    MayerK. M.HafnerJ. H. (2011). Localized surface plasmon resonance sensors. Chem. Rev.111, 3828–3857. 10.1021/cr100313v

  • 81

    MehraK.KukretiS.KaushikM. (2023). A comparative catalytic kinetics study for exploring dye degradation potential of silver, gold and palladium nanoparticles. J. Nanoparticle Res.25, 151. 10.1007/s11051-023-05795-2

  • 82

    MetwallyS.El-NaggarA.El-DamhougyA.BasharA. E.AshourM.Abo-TalebA. H. (2020). GC-MS analysis of bioactive components in six different crude extracts from the Soft Coral (Sinularia maxim) collected from Ras Mohamed, Aqaba Gulf, Red Sea, Egypt. Egypt. J. Aquat. Biol. Fish.24, 425–434. 10.21608/ejabf.2020.114293

  • 83

    MetzK. M.SandersS. E.PenderJ. P.DixM. R.HindsD. T.QuinnS. J.et al (2015). Green synthesis of metal nanoparticles via natural extracts: the biogenic nanoparticle corona and its effects on reactivity. ACS Sustain. Chem. Eng.3, 1610–1617. 10.1021/acssuschemeng.5b00304

  • 84

    MiriA.KhatamiM.EbrahimyO.SaraniM. (2020). Cytotoxic and antifungal studies of biosynthesized zinc oxide nanoparticles using extract of Prosopis farcta fruit. Green Chem. Lett. Rev.13, 27–33. 10.1080/17518253.2020.1717005

  • 85

    MoránJ.YonJ.HenryC.KholghyM. R. (2023). Approximating the van der Waals interaction potentials between agglomerates of nanoparticles. Adv. Powder Technol.34, 104269. 10.1016/j.apt.2023.104269

  • 86

    MughalB.ZaidiS. Z.ZhangX.HassanS. U. (2021). Biogenic nanoparticles: synthesis, characterisation and applications. Appl. Sci.11, 2598. 10.3390/app11062598

  • 87

    MukherjeeA.SarkarD.SasmalS. (2021). A review of green synthesis of metal nanoparticles using algae. Front. Microbiol.12, 693899. 10.3389/fmicb.2021.693899

  • 88

    NaielB.FawzyM.HalmyM. W. A.MahmoudA. E. D. (2022). Green synthesis of zinc oxide nanoparticles using Sea Lavender (Limonium pruinosum L. Chaz.) extract: characterization, evaluation of anti-skin cancer, antimicrobial and antioxidant potentials. Sci. Rep.12, 20370. 10.1038/s41598-022-24805-2

  • 89

    NaseemK.AzizA.KhanM. E.AliS.KhalidA. (2025). Bioinorganic metal nanoparticles and their potential applications as antimicrobial, antioxidant and catalytic agents: A Review. 45, 207–236. 10.1515/revic-2023-0040

  • 90

    NazirS.ZhangJ.-M.JunaidM.SaleemS.AliA.UllahA.et al (2024). Metal-based nanoparticles: basics, types, fabrications and their electronic applications. 238, 965–995. 10.1515/zpch-2023-0375

  • 91

    NguyenN. P.DangN. T.DoanL.NguyenT. T. (2023). Synthesis of silver nanoparticles: from conventional to ‘modern’ methods—a review. Processes11, 2617. 10.3390/pr11092617

  • 92

    NoahN. M. (2020). Design and synthesis of nanostructured materials for sensor applications. J. Nanomater.2020, 8855321. 10.1155/2020/8855321

  • 93

    NogutiF. S.CelestinoM. F.MoriL. T.MartinsJ. P. P.LindeG. A.ColautoN. B.et al (2025). Sustainable synthesis of silver nanoparticles (chemical vs biological) and their antimicrobial activity against clinical pathogens. ACS Omega10, 45656–45670. 10.1021/acsomega.5c05917

  • 94

    OntongJ. C.SinghS.NwaborO. F.ChusriS.VoravuthikunchaiS. P. (2020). Potential of antimicrobial topical gel with synthesized biogenic silver nanoparticle using Rhodomyrtus tomentosa leaf extract and silk sericin. Biotechnol. Lett.42, 2653–2664. 10.1007/s10529-020-02971-5

  • 95

    OsterwalderN.CapelloC.HungerbühlerK.StarkW. (2006). Energy consumption during nanoparticle production: how economic is dry synthesis?J. Nanoparticle Res.8, 1–9. 10.1007/s11051-005-8384-7

  • 96

    PantidosN.HorsfallL. (2014). Biological synthesis of metallic nanoparticles by bacteria, fungi and plants. J. Nanomed. Nanotechnol.5, 1–10. 10.4172/2157-7439.1000233

  • 97

    ParialD.PalR. (2015). Biosynthesis of monodisperse gold nanoparticles by green alga Rhizoclonium and associated biochemical changes. J. Appl. Phycol.27, 975–984. 10.1007/s10811-014-0355-x

  • 98

    PatilS.ChandrasekaranR. (2020). Biogenic nanoparticles: a comprehensive perspective in synthesis, characterization, application and its challenges. J. Genet. Eng. Biotechnol.18, 67. 10.1186/s43141-020-00081-3

  • 99

    PhogatN.KohlM.UddinI.JahanA. (2018). in Chapter 11 - Interaction of Nanoparticles with Biomolecules, Protein, Enzymes, and its Applications. Editors DeignerH.-P.KohlT.-P. M. (Academic Press), 253–276. 10.1016/B978-0-12-805364-5.00011-1

  • 100

    PiacenzaE.PresentatoA.TurnerR. J. (2018). Stability of biogenic metal(loid) nanomaterials related to the colloidal stabilization theory of chemical nanostructures. Crit. Rev. Biotechnol.38, 1137–1156. 10.1080/07388551.2018.1440525

  • 101

    PlazaM.TurnerC. (2015). Pressurized hot water extraction of bioactives. TrAC Trends Anal. Chem.71, 39–54. 10.1016/j.trac.2015.02.022

  • 102

    PozziM.Jonak DuttaS.KuntzeM.BadingJ.RüßbültJ. S.FabigC.et al (2024). Visualization of the high surface-to-volume ratio of nanomaterials and its consequences. J. Chem. Educ.101, 3146–3155. 10.1021/acs.jchemed.4c00089

  • 103

    PremaP.Subha RanjaniS.Ramesh KumarK.VeeramanikandanV.MathiyazhaganN.NguyenV.-H.et al (2022). Microbial synthesis of silver nanoparticles using Lactobacillus plantarum for antioxidant, antibacterial activities. Inorg. Chem. Commun.136, 109139. 10.1016/j.inoche.2021.109139

  • 104

    PremarathnaK. S. D.LauS. Y.ChiongT.ShowP.-L.VithanageM.LamM. K. (2024). Greening up the fight against emerging contaminants: algae-based nanoparticles for water remediation. Clean. Technol. Environ. Policy.27, 5825–5842. 10.1007/s10098-024-02862-7

  • 105

    PriyaN.KaurK.SidhuA. K. (2021). Green synthesis: an eco-friendly route for the synthesis of iron oxide nanoparticles. Front. Nanotechnol.3, 655062. 10.3389/fnano.2021.655062

  • 106

    QuanD. L.HaiP. T.LeP. H.SonD. N. (2023). Optimizing the catalytic activity of PtRuM (M = Fe, Co, Ni) nanoparticles on mesoporous carbon Vulcan–multiwalled carbon nanotubes support for direct methanol fuel cells by controlling third-metal type and content. Res. Chem. Intermed.49, 3987–4007. 10.1007/s11164-023-05055-x

  • 107

    RaoG. S. N. K.ShailajaP.ChintamaneniP. K.BabuA. K.AlavalaR. R.YadavK. S. (2023). Chapter 13 - Methods for Encapsulation of Hydrophilic Drugs in Nanocarriers. Elsevier, 315–346. 10.1016/B978-0-323-95171-5.00004-2

  • 108

    RehmanS.JermyR.Mousa AsiriS.ShahM. A.FarooqR.RavinayagamV.et al (2020). Using Fomitopsis pinicola for bioinspired synthesis of titanium dioxide and silver nanoparticles, targeting biomedical applications. RSC Adv.10, 32137–32147. 10.1039/D0RA02637A

  • 109

    SabziM.Mousavi AnijdanS. H.ShamsodinM.FarzamM.Hojjati-NajafabadiA.FengP.et al (2023). A review on sustainable manufacturing of ceramic-based thin films by chemical vapor deposition (CVD): reactions kinetics and the deposition mechanisms. Coatings13, 188. 10.3390/coatings13010188

  • 110

    SahaH.DastiderA.Ferdous AnikM. J.MimS. R.TalapatraS.DasU.et al (2024). Photocatalytic performance of CuO NPs: an experimental approach for process parameter optimization for Rh B dye. Results Mater.24, 100614. 10.1016/j.rinma.2024.100614

  • 111

    SahuM.ParkC. (2023). A comprehensive review on bismuth-sulfide-based compounds. Mater. Today Sustain.23, 100441. 10.1016/j.mtsust.2023.100441

  • 112

    SainiR. K.KumarA.GoyalV.AgarwalA.PrajeshR. (2023). Evaluating EM-field enhancement of different shapes of metallic nanoparticles using COMSOL multiphysics for SERS-based sensors. Mat. Today Proc.76, 383–387. 10.1016/j.matpr.2022.11.425

  • 113

    SallemF.chanéacC.WagnerM.RatajN.AnnabiE.CastilloA.et al (2026). Controlled synthesis of copper oxide nanoparticles (CuONPs) by the precipitation method and proposition of their growth mechanism. Nanoscale18, 5436–5446. 10.1039/D5NR04826E

  • 114

    SantosA. C. C.CorrêaJ. L.CerqueiraR. C.BatistaG. C.RodriguesT. S.BernardesL. M. M.et al (2026). Microbial synthesis of silver nanoparticles using bacterial supernatants from Brazilian stingless bees with antimicrobial activity. Sci. Rep.16, 8512. 10.1038/s41598-026-40296-x

  • 115

    SathiyarajG.VinoshaM.SangeethaD.ManikandakrishnanM.PalanisamyS.SonaimuthuM.et al (2021). Bio-directed synthesis of Pt-nanoparticles from aqueous extract of red algae Halymenia dilatata and their biomedical applications. Colloids Surf. A Physicochem. Eng. Asp.618, 126434. 10.1016/j.colsurfa.2021.126434

  • 116

    SatyavaniT. V. S. L.Srinivas KumarA.Subba RaoP. S. V. (2016). Methods of synthesis and performance improvement of lithium iron phosphate for high rate Li-ion batteries: a review. Eng. Sci. Technol. Int. J.19, 178–188. 10.1016/j.jestch.2015.06.002

  • 117

    Serna-GallénP.MužinaK. (2024). Metallic nanoparticles at the forefront of research: novel trends in catalysis and plasmonics. Nano Mater. Sci.8, 534–555. 10.1016/j.nanoms.2024.10.009

  • 118

    SerraA.FilippoE.ReM.PalmisanoM.Vittori-AntisariM.BuccolieriA.et al (2009). Non-functionalized silver nanoparticles for a localized surface plasmon resonance-based glucose sensor. Nanotechnology20, 165501. 10.1088/0957-4484/20/16/165501

  • 119

    ShahM.FawcettD.SharmaS.TripathyS. K.PoinernG. E. (2015). Green synthesis of metallic nanoparticles via biological entities. Materials8, 7278–7308. 10.3390/ma8115377

  • 120

    ShahD. D.ChorawalaM. R.MansuriM. K. A.ParekhP. S.SinghS.PrajapatiB. G. (2024). Biogenic metallic nanoparticles: from green synthesis to clinical translation. Naunyn. Schmiedeb. Arch. Pharmacol.397, 8603–8631. 10.1007/s00210-024-03236-y

  • 121

    ShanmuganathanR.MubarakAliD.PrabakarD.MuthukumarH.ThajuddinN.KumarS. S.et al (2018). An enhancement of antimicrobial efficacy of biogenic and ceftriaxone-conjugated silver nanoparticles: green approach. Environ. Sci. Pollut. Res. Int.25, 10362–10370. 10.1007/s11356-017-9367-9

  • 122

    SharmaK.ChakrobortyS.PalK.PandaA. R.MalviyaJ.NathN.et al (2024). Controllable synthesis of high-yield magnetic nanomaterials assisted dye adsorbents from waste-water treatment and applications. J. Mol. Struct.1304, 137550. 10.1016/j.molstruc.2024.137550

  • 123

    ShiF.XieW. (2016). A specific energy-based ball mill model: from batch grinding to continuous operation. Min. Eng.86, 66–74. 10.1016/j.mineng.2015.12.004

  • 124

    SlavinY. N.AsnisJ.HäfeliU. O.BachH. (2017). Metal nanoparticles: understanding the mechanisms behind antibacterial activity. J. Nanobiotechnology15, 65. 10.1186/s12951-017-0308-z

  • 125

    SoltaniN.SaionE.ErfaniM.RezaeeK.BahmanrokhG.DrummenG.et al (2012). Influence of the polyvinyl pyrrolidone concentration on particle size and dispersion of ZnS nanoparticles synthesized by microwave irradiation. Int. J. Mol. Sci. (IJMS)13, 12412–12427. 10.3390/ijms131012412

  • 126

    SportelliM.VolpeA.ClementeM.PiccaR.AnconaA.LugaràP.et al (2018). The pros and Cons of the Use of laser ablation synthesis for the production of silver nano-antimicrobials. Antibiotics7, 67. 10.3390/antibiotics7030067

  • 127

    Suárez PriedeA.Gómez-SánchezM.García-CancelaP.BettmerJ.DíezP. (2026). Deciphering the formation of biogenic nanoparticles and their protein corona: state-of-the-art and analytical challenges. Anal. Bioanal. Chem.418, 415–435. 10.1007/s00216-025-06144-z

  • 128

    TalebianS.ShahnavazB.NejabatM.AbolhassaniY.RassouliF. B. (2023). Bacterial-mediated synthesis and characterization of copper oxide nanoparticles with antibacterial, antioxidant, and anticancer potentials. Front. Bioeng. Biotechnol.11-2023, 1140010. 10.3389/fbioe.2023.1140010

  • 129

    ThakurM.SharmaA.ChandelM.PathaniaD. (2022). “Chapter 9 - modern applications and current status of green nanotechnology in environmental industry,” in Micro and Nano Technologies (Elsevier), 259–281. 10.1016/B978-0-12-823137-1.00010-5

  • 130

    UrnukhsaikhanE.BoldB.-E.GunbilegA.SukhbaatarN.Mishig-OchirT. (2021). Antibacterial activity and characteristics of silver nanoparticles biosynthesized from Carduus crispus. Sci. Rep.11, 21047. 10.1038/s41598-021-00520-2

  • 131

    UzairB.LiaqatA.IqbalH.MenaaB.RazzaqA.ThiripuranatharG.et al (2020). Green and cost-effective synthesis of metallic nanoparticles by algae: safe methods for translational medicine. Bioengineering7, 129. 10.3390/bioengineering7040129

  • 132

    Varghese AlexK.Tamil PavaiP.RugminiR.Shiva PrasadM.KamakshiK.SekharK. C. (2020). Green synthesized Ag nanoparticles for bio-sensing and photocatalytic applications. ACS Omega5, 13123–13129. 10.1021/acsomega.0c01136

  • 133

    Vinnacombe-WillsonG. A.ContiY.StefancuA.WeissP. S.CortésE.ScarabelliL. (2023). Direct bottom-up in situ growth: a paradigm shift for studies in wet-chemical synthesis of gold nanoparticles. Chem. Rev.123, 8488–8529. 10.1021/acs.chemrev.2c00914

  • 134

    VishwanathR.NegiB. (2021). Conventional and green methods of synthesis of silver nanoparticles and their antimicrobial properties. Curr. Res. Green Sustain. Chem.4, 100205. 10.1016/j.crgsc.2021.100205

  • 135

    VollathD. (2020). Agglomerates of nanoparticles. Beilstein J. Nanotechnol.11, 854–857. 10.3762/bjnano.11.70

  • 136

    WangY.ZhangF.FanX.LuY.WangC.HuangX.et al (2023). Broadband enhancement in the spectral response of photovoltaic modules with flower-like silver particles. Photonics10, 1102. 10.3390/photonics10101102

  • 137

    XiongL.ZhangX.HuangY.-X.LiuW.-J.ChenY.-L.YuS.-S.et al (2018). Biogenic synthesis of Pd-based nanoparticles with enhanced catalytic activity. ACS Appl. Nano Mat.1, 1467–1475. 10.1021/acsanm.7b00322

  • 138

    YaashikaaP. R.KumarP. S. (2022). Fabrication and characterization of magnetic nanomaterials for the removal of toxic pollutants from water environment: a review. Chemosphere303, 135067. 10.1016/j.chemosphere.2022.135067

  • 139

    ZafarS.FarooqA.BatoolS.TariqT.HasanM.MustafaG. (2024). Green synthesis of iron oxide nanoparticles for mitigation of chromium stress and anti-oxidative potential in Triticum aestivum. Hybrid. Adv.5, 100156. 10.1016/j.hybadv.2024.100156

  • 140

    ZhaoJ.XueS.JiR.LiB.LiJ. (2021). Localized surface plasmon resonance for enhanced electrocatalysis. Chem. Soc. Rev.50, 12070–12097. 10.1039/D1CS00237F

  • 141

    ZhouM.GengZ. (2024). Integrated LSPR biosensing signal processing strategy and visualization implementation. Micromachines (Basel)15, 631. 10.3390/mi15050631

  • 142

    ZhouN.YangR.ZhaiT. (2019). Two-dimensional non-layered materials. Mat. Today Nano8, 100051. 10.1016/j.mtnano.2019.100051

  • 143

    ZhuH.PrinceE.NarayananP.LiuK.NieZ.KumachevaE. (2020). Colloidal stability of nanoparticles stabilized with mixed ligands in solvents with varying polarity. Chem. Commun.56, 8131–8134. 10.1039/D0CC02592E

  • 144

    ZinouneJ.-B.CassagneC.WertsM. H. V.LoumaigneM.ChisM.BoudebsG. (2023). Wavelength-dependence of the photothermal efficiency of gold nanoparticles in solution by Z-scan photothermal lens spectroscopy. Chem. Phys. Lett.823, 140501. 10.1016/j.cplett.2023.140501

Summary

Keywords

biogenic synthesis, biotechnology, bottom-up synthesis, green chemistry, metallic nanoparticles, nanomaterials

Citation

Flores-Otero JF, Ramos-de-la-Peña AM and Aguilar O (2026) Biogenic synthesis: an alternative method for metallic and metal-based nanomaterials. Front. Biomater. Sci. 5:1858048. doi: 10.3389/fbiom.2026.1858048

Received

16 April 2026

Revised

28 May 2026

Accepted

12 October 2026

Published

23 October 2026

Volume

5 - 2026

Edited by

Antonio Topete, University of Santiago de Compostela, Spain

Reviewed by

Bhargab Thakuria, NETES Institute of Pharmaceutical Science, India

Mario Almada, University of Sonora, Mexico

Updates

Copyright

*Correspondence: Ana Mayela Ramos-de-la-Peña, ; Oscar Aguilar,

Disclaimer

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.

Outline

Figures

Cite article

Copy to clipboard


Export citation file


Share article

Article metrics