<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing DTD v2.3 20070202//EN" "journalpublishing.dtd">
<article article-type="review-article" dtd-version="2.3" xml:lang="EN" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">
<front>
<journal-meta>
<journal-id journal-id-type="publisher-id">Front. Chem. Eng.</journal-id>
<journal-title>Frontiers in Chemical Engineering</journal-title>
<abbrev-journal-title abbrev-type="pubmed">Front. Chem. Eng.</abbrev-journal-title>
<issn pub-type="epub">2673-2718</issn>
<publisher>
<publisher-name>Frontiers Media S.A.</publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id pub-id-type="publisher-id">1059160</article-id>
<article-id pub-id-type="doi">10.3389/fceng.2022.1059160</article-id>
<article-categories>
<subj-group subj-group-type="heading">
<subject>Chemical Engineering</subject>
<subj-group>
<subject>Mini Review</subject>
</subj-group>
</subj-group>
</article-categories>
<title-group>
<article-title>Kinetic study of multiphase reactions under microwave irradiation: A mini-review</article-title>
<alt-title alt-title-type="left-running-head">Adavi et al.</alt-title>
<alt-title alt-title-type="right-running-head">
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.3389/fceng.2022.1059160">10.3389/fceng.2022.1059160</ext-link>
</alt-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname>Adavi</surname>
<given-names>Kazem</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/2038699/overview"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Amini</surname>
<given-names>Ahmadreza</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/2059079/overview"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Latifi</surname>
<given-names>Mohammad</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/1954163/overview"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Shabanian</surname>
<given-names>Jaber</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<xref ref-type="aff" rid="aff2">
<sup>2</sup>
</xref>
</contrib>
<contrib contrib-type="author" corresp="yes">
<name>
<surname>Chaouki</surname>
<given-names>Jamal</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<xref ref-type="aff" rid="aff3">
<sup>3</sup>
</xref>
<xref ref-type="corresp" rid="c001">&#x2a;</xref>
<uri xlink:href="https://loop.frontiersin.org/people/1933677/overview"/>
</contrib>
</contrib-group>
<aff id="aff1">
<sup>1</sup>
<institution>Process Engineering Advanced Research Lab (PEARL)</institution>, <institution>Department of Chemical Engineering</institution>, <institution>Polytechnique Montreal</institution>, <addr-line>Montreal</addr-line>, <addr-line>QC</addr-line>, <country>Canada</country>
</aff>
<aff id="aff2">
<sup>2</sup>
<institution>Heirloom</institution>, <addr-line>Brisbane</addr-line>, <addr-line>CA</addr-line>, <country>United States</country>
</aff>
<aff id="aff3">
<sup>3</sup>
<institution>Technology Development Cell (Tech-Cell) Department</institution>, <institution>Mohammed VI Polytechnic University</institution>, <addr-line>Ben Guerir</addr-line>, <country>Morocco</country>
</aff>
<author-notes>
<fn fn-type="edited-by">
<p>
<bold>Edited by:</bold> <ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/1752488/overview">Xinwei Bai</ext-link>, National Energy Technology Laboratory (Leidos), United States</p>
</fn>
<fn fn-type="edited-by">
<p>
<bold>Reviewed by:</bold> <ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/948731/overview">Jinlong Liu</ext-link>, Zhejiang University, China</p>
<p>
<ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/2041867/overview">Yifan Deng</ext-link>, Braskem America Inc., United States</p>
</fn>
<corresp id="c001">&#x2a;Correspondence: Jamal Chaouki, <email>jamal.chaouki@polymtl.ca</email>
</corresp>
<fn fn-type="other">
<p>This article was submitted to Chemical Reaction Engineering, a section of the journal Frontiers in Chemical Engineering</p>
</fn>
</author-notes>
<pub-date pub-type="epub">
<day>01</day>
<month>11</month>
<year>2022</year>
</pub-date>
<pub-date pub-type="collection">
<year>2022</year>
</pub-date>
<volume>4</volume>
<elocation-id>1059160</elocation-id>
<history>
<date date-type="received">
<day>30</day>
<month>09</month>
<year>2022</year>
</date>
<date date-type="accepted">
<day>19</day>
<month>10</month>
<year>2022</year>
</date>
</history>
<permissions>
<copyright-statement>Copyright &#xa9; 2022 Adavi, Amini, Latifi, Shabanian and Chaouki.</copyright-statement>
<copyright-year>2022</copyright-year>
<copyright-holder>Adavi, Amini, Latifi, Shabanian and Chaouki</copyright-holder>
<license xlink:href="http://creativecommons.org/licenses/by/4.0/">
<p>This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.</p>
</license>
</permissions>
<abstract>
<p>Microwave (MW) heating is rapid, selective, and volumetric, and it is a compelling non-conventional heating approach for driving chemical reactions. The effect of MW irradiation on the kinetics of thermal/catalytic reactions is still under debate. A group of researchers reported that the effect of MW heating on reaction kinetics is highlighted through the non-thermal effects of MWs on kinetic parameters and reaction mechanisms in addition to the thermal effect. However, another group attributed the observations to the thermal effect only. In the present work, we summarized and critically synthesized available information in the literature on the subject. It can be concluded that MW heating has solely the thermal effect on gas-solid reactions, and the variations of kinetic parameters are related to the direct and indirect impacts of that. Temperature measurement limitations, physical structure variation, and non-uniform temperature distribution are the primary sources of the discrepancy in previous studies. In ionic liquid-solid reactions, the presence of electromagnetic fields can affect the movement of ions/polar molecules which can be considered a non-thermal effect of MWs. However, the effect of MW absorption by solid/catalyst, and the formation of hot spots must be taken into account to avoid potential discrepancy. Therefore, further theoretical/experimental studies are required to clarify the effect of MWs on liquid-solid reactions. In addition, developing reliable temperature measurement methods and isothermal reaction domain are required for an accurate kinetic study during MW irradiation.</p>
</abstract>
<kwd-group>
<kwd>microwave irradiation</kwd>
<kwd>reaction kinetics</kwd>
<kwd>thermal effect</kwd>
<kwd>non-thermal effect</kwd>
<kwd>temperature measurement</kwd>
<kwd>hot spot</kwd>
</kwd-group>
</article-meta>
</front>
<body>
<sec id="s1">
<title>Introduction</title>
<p>Compared to conventional heating, microwave (MW) heating is an effective heat supply approach for chemical and material processes. Electromagnetic (EM) properties of materials, including permittivity, permeability, penetration depth, and electrical conductivity play critical roles in absorbing MWs and their conversion to thermal energy (<xref ref-type="bibr" rid="B18">Gupta and Leong, 2007</xref>; <xref ref-type="bibr" rid="B2">Amini et al., 2021</xref>). In the conventional heating of a multi-phase system, an external source supplies heat, and the whole system, including solid particles, gas/liquid, and reactor walls, are at similar temperatures. Therefore, non-desired secondary reactions likely occur in the fluid phase, reducing the desired chemicals&#x2019; production rate and process efficiency (<xref ref-type="bibr" rid="B19">Hamzehlouia et al., 2018</xref>). In the MW heating approach, however, heat is generated in the body of certain phases (commonly solid particles) owing to the high penetration depth of MWs and their interaction with dielectric material loaded in the reactors. MWs cannot directly heat the gas phase due to their negligible interactions with this phase (<xref ref-type="bibr" rid="B19">Hamzehlouia et al., 2018</xref>; <xref ref-type="bibr" rid="B3">Amini et al., 2019</xref>). Therefore, a considerable temperature gradient between the solid particles (either inert or catalyst) and fluid suppresses the fluid-phase side reactions, favors the production of desired chemicals, and likely leads to higher selectivity and conversion (<xref ref-type="bibr" rid="B37">Stefanidis et al., 2014</xref>; <xref ref-type="bibr" rid="B19">Hamzehlouia et al., 2018</xref>; <xref ref-type="bibr" rid="B3">Amini et al., 2019</xref>; <xref ref-type="bibr" rid="B34">Robinson et al., 2020</xref>). The rapid and selective features of MW heating also decrease the treatment time and energy loss during the process (<xref ref-type="bibr" rid="B18">Gupta and Leong, 2007</xref>). The effects of MW irradiation on various multiphase (gas/liquid-solid phases) reaction systems are presented in <xref ref-type="table" rid="T1">Table 1</xref>.</p>
<table-wrap id="T1" position="float">
<label>TABLE 1</label>
<caption>
<p>Impact of MW heating on multiphase reactions.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th rowspan="2" align="left">No.</th>
<th rowspan="2" align="left">Process</th>
<th rowspan="2" align="left">Reactor ID (mm)/sample amount (g or ml)</th>
<th rowspan="2" align="left">Temperature measurement technique</th>
<th rowspan="2" align="left">Heating approach</th>
<th colspan="3" align="left">MW effect</th>
<th rowspan="2" align="left">Ref.</th>
</tr>
<tr>
<th align="left">Conversion</th>
<th align="left">Selectivity</th>
<th align="left">Reaction temp.</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">1</td>
<td align="left">Methane decomposition</td>
<td align="left">22&#xa0;mm</td>
<td align="left">Pyrometer</td>
<td align="left">Direct</td>
<td align="left">&#x2191;<xref ref-type="table-fn" rid="Tfn1">
<sup>a</sup>
</xref>
</td>
<td align="left">&#x2191;</td>
<td align="left">NA<xref ref-type="table-fn" rid="Tfn2">
<sup>b</sup>
</xref>
</td>
<td align="left">
<xref ref-type="bibr" rid="B8">Bi et al. (1999)</xref>
</td>
</tr>
<tr>
<td rowspan="2" align="left">2</td>
<td rowspan="2" align="left">Methane oxidation</td>
<td rowspan="2" align="left">5&#xa0;mm</td>
<td align="left">Pyrometer</td>
<td rowspan="2" align="left">Direct</td>
<td rowspan="2" align="left">&#x2191;</td>
<td rowspan="2" align="left">&#x2191;</td>
<td rowspan="2" align="left">&#x2193;<xref ref-type="table-fn" rid="Tfn3">
<sup>c</sup>
</xref>
</td>
<td rowspan="2" align="left">
<xref ref-type="bibr" rid="B30">Pham et al. (2020)</xref>
</td>
</tr>
<tr>
<td align="left">&#x2b;metallic thermocouple</td>
</tr>
<tr>
<td align="left">3</td>
<td align="left">Methane dry reforming</td>
<td align="left">5&#x2013;30&#xa0;mm</td>
<td align="left">Pyrometer</td>
<td align="left">Hybrid</td>
<td align="left">&#x2191;</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">
<xref ref-type="bibr" rid="B4">Bai et al. (2022)</xref>
</td>
</tr>
<tr>
<td align="left">4</td>
<td align="left">Methane dehydroaromatization</td>
<td align="left">8&#xa0;mm</td>
<td align="left">IR</td>
<td align="left">Direct</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">&#x2193;</td>
<td align="left">
<xref ref-type="bibr" rid="B12">Durka et al. (2011)</xref>
</td>
</tr>
<tr>
<td align="left">5</td>
<td align="left">Methanol steam reforming</td>
<td align="left">24&#xa0;mm</td>
<td align="left">Fiber optic probe</td>
<td align="left">Direct</td>
<td align="left">&#x2191;</td>
<td align="left">&#x2191;</td>
<td align="left">&#x2193;</td>
<td align="left">
<xref ref-type="bibr" rid="B9">Chen et al. (2022)</xref>
</td>
</tr>
<tr>
<td align="left">7</td>
<td align="left">H<sub>2</sub>S decomposition</td>
<td align="left">2&#xa0;g</td>
<td align="left">Metallic thermocouple</td>
<td align="left">Direct</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">NA</td>
<td align="left">
<xref ref-type="bibr" rid="B13">Einaga et al. (2016)</xref>
</td>
</tr>
<tr>
<td align="left">8</td>
<td align="left">CO oxidation</td>
<td align="left">0.1&#xa0;g</td>
<td align="left">Fiber optic probe</td>
<td align="left">Direct</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">NA</td>
<td align="left">
<xref ref-type="bibr" rid="B32">Ramirez et al. (2020)</xref>
</td>
</tr>
<tr>
<td align="left">9</td>
<td align="left">Propane oxidation</td>
<td align="left">16&#xa0;mm</td>
<td align="left">Pyrometer</td>
<td align="left">Hybrid</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">&#x2193;</td>
<td align="left">
<xref ref-type="bibr" rid="B40">Xia et al. (2020)</xref>
</td>
</tr>
<tr>
<td align="left">10</td>
<td align="left">n-butane oxidation</td>
<td align="left">24&#xa0;mm</td>
<td align="left">Pyrometer</td>
<td align="left">Hybrid</td>
<td align="left">&#x2191;</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">
<xref ref-type="bibr" rid="B19">Hamzehlouia et al. (2018)</xref>
</td>
</tr>
<tr>
<td align="left">11</td>
<td align="left">SO<sub>2</sub> reduction</td>
<td align="left">20&#xa0;mm</td>
<td align="left">Metallic thermocouple</td>
<td align="left">Direct</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">NA</td>
<td align="left">
<xref ref-type="bibr" rid="B5">Bai et al. (2019)</xref>
</td>
</tr>
<tr>
<td align="left">12</td>
<td align="left">Ethane valorization</td>
<td align="left">8&#xa0;mm</td>
<td align="left">Pyrometer</td>
<td align="left">Hybrid</td>
<td align="left">&#x2191;</td>
<td align="left">&#x2191;</td>
<td align="left">&#x2193;</td>
<td align="left">
<xref ref-type="bibr" rid="B34">Robinson et al. (2020)</xref>
</td>
</tr>
<tr>
<td align="left">16</td>
<td align="left">Upgrading stranded shale gas to aromatics</td>
<td align="left">10&#xa0;mm</td>
<td align="left">Pyrometer</td>
<td align="left">Direct</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">&#x2193;</td>
<td align="left">
<xref ref-type="bibr" rid="B43">Zhang et al. (2022)</xref>
</td>
</tr>
<tr>
<td align="left">17</td>
<td align="left">Synthesis of phytosterol esters</td>
<td align="left">200&#xa0;ml</td>
<td align="left">NA</td>
<td align="left">Hybrid</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">&#x2193;</td>
<td align="left">
<xref ref-type="bibr" rid="B29">Perry et al. (2002)</xref>
</td>
</tr>
<tr>
<td align="left">18</td>
<td align="left">Sodium tetrahydridoborate (NaBH<sub>4</sub>) hydrolysis</td>
<td align="left">15&#xa0;mm</td>
<td align="left">NA</td>
<td align="left">Hybrid</td>
<td align="left">&#x2191;</td>
<td align="left">NA</td>
<td align="left">&#x2193;</td>
<td align="left">
<xref ref-type="bibr" rid="B42">Yang et al. (2020)</xref>
</td>
</tr>
</tbody>
</table>
<table-wrap-foot>
<fn id="Tfn1">
<label>
<sup>a</sup>
</label>
<p>: increasing,</p>
</fn>
<fn id="Tfn2">
<label>
<sup>b</sup>
</label>
<p>: not applicable,</p>
</fn>
<fn id="Tfn3">
<label>
<sup>c</sup>
</label>
<p>: decreasing.</p>
</fn>
</table-wrap-foot>
</table-wrap>
<p>Despite the applications of MW heating in multiphase systems, its effect on the kinetics of these reactions is still under debate. The main discrepancy is the presence of non-thermal effects, i.e., the interaction of MWs with materials at atomic/subatomic level and electron donation enhancement, in addition to the thermal effects, i.e., selective heating and formation of hotspots. In the present communication, we reviewed the impacts of MW heating on the reaction kinetics of multiphase reactions reported in the literature. We critically compared the experimental procedures in various references to propose the potential sources of discrepancy in the kinetic results.</p>
</sec>
<sec id="s2">
<title>Kinetics of gas/liquid-solid reactions</title>
<p>According to literature, MW heating has mainly thermal effects on reaction kinetics. For instance, hot spots generated during the MW treatment of solid beds enhance the reaction rate as their temperature is significantly higher than the average bed (or bulk) temperature (<xref ref-type="bibr" rid="B3">Amini et al., 2019</xref>; <xref ref-type="bibr" rid="B2">Amini et al., 2021</xref>). The hot spots can form microcracks inside the solid materials and enhance internal mass transfer. For instance, MWs selectively heat some components of iron oxide minerals, generating a temperature gradient between different components within an ore particle. Accordingly, micro-cracks are generated throughout the ore, enhancing gas diffusion into the ore, and improving the apparent kinetics of the reduction reaction (<xref ref-type="bibr" rid="B3">Amini et al., 2019</xref>).</p>
<p>In some discrepant cases, the non-thermal effect of MWs is also reported as a driving force in accelerating reactions (<xref ref-type="bibr" rid="B20">Hu et al., 2020</xref>). For instance, it was reported that a decrease in the activation energy (<inline-formula id="inf1">
<mml:math id="m1">
<mml:mrow>
<mml:mi>E</mml:mi>
</mml:mrow>
</mml:math>
</inline-formula> in <xref ref-type="disp-formula" rid="e1">Eq. 1</xref>) during carbothermic reduction of zinc oxide and zinc ferrite, which occurs at a lower temperature compared to conventional heating (<xref ref-type="bibr" rid="B27">Omran et al., 2020</xref>). In addition, Fukushima et al. (<xref ref-type="bibr" rid="B16">Fukushima et al., 2013</xref>) studied the reduction of copper oxide (CuO to Cu<sub>2</sub>O) under MW heating. They reported that, compared to the conventional heating, <inline-formula id="inf2">
<mml:math id="m2">
<mml:mrow>
<mml:mi>E</mml:mi>
</mml:mrow>
</mml:math>
</inline-formula> decreases to 2/3 and 1/3 under electric- and magnetic-field, respectively, due to the non-thermal effect of MWs. In contrast, others believe that decreasing the activation energy is due to underestimating hot spots temperature (<xref ref-type="bibr" rid="B19">Hamzehlouia et al., 2018</xref>; <xref ref-type="bibr" rid="B2">Amini et al., 2021</xref>). Accordingly, the measured temperature was the bulk temperature, while catalyst/solid particles had noticeably (50&#x2013;300&#xb0;C) higher temperatures owing to selective heating <italic>via</italic> MWs (<xref ref-type="bibr" rid="B18">Gupta and Leong, 2007</xref>; <xref ref-type="bibr" rid="B15">Farag and Chaouki, 2015</xref>; <xref ref-type="bibr" rid="B19">Hamzehlouia et al., 2018</xref>; <xref ref-type="bibr" rid="B2">Amini et al., 2021</xref>). <xref ref-type="disp-formula" rid="e1">Eq. 1</xref> shows the general equation for reaction rate and its parameters.<disp-formula id="e1">
<mml:math id="m3">
<mml:mrow>
<mml:msub>
<mml:mi>R</mml:mi>
<mml:mi>i</mml:mi>
</mml:msub>
<mml:mo>&#x3d;</mml:mo>
<mml:msub>
<mml:mi>k</mml:mi>
<mml:mn>0</mml:mn>
</mml:msub>
<mml:mo>&#x2061;</mml:mo>
<mml:mi>exp</mml:mi>
<mml:mo>&#x2061;</mml:mo>
<mml:mo>&#x2061;</mml:mo>
<mml:mrow>
<mml:mo>(</mml:mo>
<mml:mrow>
<mml:mfrac>
<mml:mrow>
<mml:mo>&#x2212;</mml:mo>
<mml:mi>E</mml:mi>
</mml:mrow>
<mml:mrow>
<mml:mi>R</mml:mi>
<mml:mi>T</mml:mi>
</mml:mrow>
</mml:mfrac>
</mml:mrow>
<mml:mo>)</mml:mo>
</mml:mrow>
<mml:mi>f</mml:mi>
<mml:mrow>
<mml:mo>(</mml:mo>
<mml:mrow>
<mml:msub>
<mml:mi>C</mml:mi>
<mml:mi>i</mml:mi>
</mml:msub>
</mml:mrow>
<mml:mo>)</mml:mo>
</mml:mrow>
</mml:mrow>
</mml:math>
<label>(1)</label>
</disp-formula>where <inline-formula id="inf3">
<mml:math id="m4">
<mml:mrow>
<mml:msub>
<mml:mi>R</mml:mi>
<mml:mi>i</mml:mi>
</mml:msub>
</mml:mrow>
</mml:math>
</inline-formula> is the reaction rate of component <inline-formula id="inf4">
<mml:math id="m5">
<mml:mrow>
<mml:mi>i</mml:mi>
</mml:mrow>
</mml:math>
</inline-formula>, <inline-formula id="inf5">
<mml:math id="m6">
<mml:mrow>
<mml:msub>
<mml:mi>k</mml:mi>
<mml:mn>0</mml:mn>
</mml:msub>
</mml:mrow>
</mml:math>
</inline-formula> is the pre-exponential factor, <inline-formula id="inf6">
<mml:math id="m7">
<mml:mrow>
<mml:mi>R</mml:mi>
</mml:mrow>
</mml:math>
</inline-formula> is the universal gas constant, <inline-formula id="inf7">
<mml:math id="m8">
<mml:mrow>
<mml:mi>T</mml:mi>
</mml:mrow>
</mml:math>
</inline-formula> is the absolute temperature, and <inline-formula id="inf8">
<mml:math id="m9">
<mml:mrow>
<mml:msub>
<mml:mi>C</mml:mi>
<mml:mi>i</mml:mi>
</mml:msub>
</mml:mrow>
</mml:math>
</inline-formula> is the concentration of component <inline-formula id="inf9">
<mml:math id="m10">
<mml:mrow>
<mml:mi>i</mml:mi>
</mml:mrow>
</mml:math>
</inline-formula>.</p>
<p>In the case of <inline-formula id="inf10">
<mml:math id="m11">
<mml:mrow>
<mml:msub>
<mml:mi>k</mml:mi>
<mml:mn>0</mml:mn>
</mml:msub>
</mml:mrow>
</mml:math>
</inline-formula>, both the increase (<xref ref-type="bibr" rid="B41">Yadav and V Borkar, 2006</xref>; <xref ref-type="bibr" rid="B1">Adnadjevic and Jovanovic, 2012</xref>) and decrease (<xref ref-type="bibr" rid="B36">She-bin et al., 2008</xref>; <xref ref-type="bibr" rid="B11">Dong and Xiong, 2014</xref>; <xref ref-type="bibr" rid="B24">Liu et al., 2019</xref>) have been reported under MW heating. However, <inline-formula id="inf11">
<mml:math id="m12">
<mml:mrow>
<mml:msub>
<mml:mi>k</mml:mi>
<mml:mn>0</mml:mn>
</mml:msub>
</mml:mrow>
</mml:math>
</inline-formula> is known as collision frequency that should not decrease under MW heating (<xref ref-type="bibr" rid="B15">Farag and Chaouki, 2015</xref>). In MW transparent fluids, no change is expected in <inline-formula id="inf12">
<mml:math id="m13">
<mml:mrow>
<mml:msub>
<mml:mi>k</mml:mi>
<mml:mn>0</mml:mn>
</mml:msub>
</mml:mrow>
</mml:math>
</inline-formula> compared to the conventional heating approach. The Effects of MW heating on the kinetic parameters of some thermal/catalytic reactions for gas/liquid-solid systems are presented in <xref ref-type="table" rid="T2">Table 2</xref>. Reactor diameter/sample amount, temperature measurement technique, and heating approach (direct: directly heating the sample <italic>via</italic> MWs, or hybrid: mixing the sample with MW receptor materials, such as silicon carbide (SiC) and activated carbon to heat the sample indirectly) are investigated in this paper.</p>
<table-wrap id="T2" position="float">
<label>TABLE 2</label>
<caption>
<p>kinetic studies of gas/liquid-solid systems under MW irradiations.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th rowspan="2" align="left">Process</th>
<th rowspan="2" align="left">Reactor ID (mm)/mass (g)</th>
<th rowspan="2" align="left">Temperature measurement technique</th>
<th colspan="2" align="left">Changes compared to conventional heating</th>
<th rowspan="2" align="left">Rate controlling mechanism</th>
<th rowspan="2" align="left">Heating approach</th>
<th rowspan="2" align="left">Ref.</th>
</tr>
<tr>
<th align="left">
<inline-formula id="inf13">
<mml:math id="m14">
<mml:mrow>
<mml:mi mathvariant="bold-italic">E</mml:mi>
</mml:mrow>
</mml:math>
</inline-formula>
</th>
<th align="left">
<inline-formula id="inf14">
<mml:math id="m15">
<mml:mrow>
<mml:msub>
<mml:mi mathvariant="bold-italic">K</mml:mi>
<mml:mn mathvariant="bold">0</mml:mn>
</mml:msub>
</mml:mrow>
</mml:math>
</inline-formula>
</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">Methanol reforming</td>
<td align="left">8&#xa0;mm</td>
<td align="left">Metallic thermocouple (top of the bed)</td>
<td align="left">No change</td>
<td align="left">No change</td>
<td align="left">No change</td>
<td align="left">Hybrid</td>
<td align="left">
<xref ref-type="bibr" rid="B21">Huang et al. (2016)</xref>
</td>
</tr>
<tr>
<td align="left">Thermal pyrolysis of bamboo sawdust</td>
<td align="left">45&#xa0;mm</td>
<td align="left">Grounded metallic thermocouple (center of the bed)</td>
<td align="left">&#x2193;<xref ref-type="table-fn" rid="Tfn4">
<sup>a</sup>
</xref>
</td>
<td align="left">&#x2193;</td>
<td align="left">NA</td>
<td align="left">Hybrid</td>
<td align="left">
<xref ref-type="bibr" rid="B11">Dong and Xiong, (2014)</xref>
</td>
</tr>
<tr>
<td align="left">Char steam gasification</td>
<td align="left">20&#xa0;mm</td>
<td align="left">Grounded metallic thermocouple (center of the bed)</td>
<td align="left">&#x2193;</td>
<td align="left">&#x2193;</td>
<td align="left">No change (SCM<xref ref-type="table-fn" rid="Tfn6">
<sup>c</sup>
</xref>, VRM<xref ref-type="table-fn" rid="Tfn7">
<sup>d</sup>
</xref>)</td>
<td align="left">Direct</td>
<td align="left">
<xref ref-type="bibr" rid="B24">Liu et al. (2019)</xref>
</td>
</tr>
<tr>
<td rowspan="2" align="left">Iron production <italic>via</italic> hydrogen-reduction of Iron(II) sulfide &#x2013;calcium oxide (FeS-CaO) mixture</td>
<td rowspan="2" align="left">35&#xa0;mm</td>
<td rowspan="2" align="left">Radiation thermometer</td>
<td rowspan="2" align="left">&#x2193;</td>
<td rowspan="2" align="left">NA</td>
<td align="left">&#x2022;Conventional: reaction rate-limiting, and then diffusion rate limiting.</td>
<td rowspan="2" align="left">Direct</td>
<td rowspan="2" align="left">
<xref ref-type="bibr" rid="B3">Amini et al. (2019)</xref>
</td>
</tr>
<tr>
<td align="left">&#x2022;MW heating: gas diffusion rate-limiting</td>
</tr>
<tr>
<td align="left">Reduction of chromium ore fines containing coal</td>
<td align="left">65&#xa0;mm</td>
<td align="left">Metallic thermocouple</td>
<td align="left">&#x2193;</td>
<td align="left">NA</td>
<td align="left">No change</td>
<td align="left">Direct</td>
<td align="left">
<xref ref-type="bibr" rid="B36">She-bin et al. (2008)</xref>
</td>
</tr>
<tr>
<td align="left">Carbothermic reduction of zinc oxide and zinc ferrite</td>
<td align="left">NA</td>
<td align="left">Metallic thermocouple on top of the sample</td>
<td align="left">&#x2193;</td>
<td align="left">NA</td>
<td align="left">NA</td>
<td align="left">Hybrid</td>
<td align="left">
<xref ref-type="bibr" rid="B27">Omran et al. (2020)</xref>
</td>
</tr>
<tr>
<td align="left">Pyrolysis of waste printed circuit boards</td>
<td align="left">40&#xa0;g sample in MW-TGA</td>
<td align="left">Metallic thermocouple</td>
<td align="left">&#x2193;</td>
<td align="left">&#x2193;</td>
<td align="left">Under MW heating, reaction order decreased</td>
<td align="left">Hybrid</td>
<td align="left">
<xref ref-type="bibr" rid="B38">Sun et al. (2012)</xref>
</td>
</tr>
<tr>
<td align="left">Pyrolysis of lignocellulosic biomass</td>
<td align="left">Quartz crucible (3&#x2013;5&#xa0;g)</td>
<td align="left">Metallic thermocouple</td>
<td align="left">&#x2193;</td>
<td align="left">&#x2193;</td>
<td align="left">NA</td>
<td align="left">Hybrid</td>
<td align="left">
<xref ref-type="bibr" rid="B25">Luo et al. (2017)</xref>
</td>
</tr>
<tr>
<td align="left">Reduction of copper oxide (CuO)</td>
<td align="left">Pelletized particles (8 &#xd7; 2&#xa0;mm)</td>
<td align="left">IR<xref ref-type="table-fn" rid="Tfn8">
<sup>e</sup>
</xref> thermometer</td>
<td align="left">&#x2193;</td>
<td align="left">&#x2193;</td>
<td align="left">NA</td>
<td align="left">Direct</td>
<td align="left">
<xref ref-type="bibr" rid="B16">Fukushima et al. (2013)</xref>
</td>
</tr>
<tr>
<td align="left">Pyrolysis of wood sawdust for phenolic rich compounds</td>
<td align="left">NA</td>
<td align="left">IR thermometer</td>
<td align="left">&#x2193;</td>
<td align="left">NA</td>
<td align="left">NA</td>
<td align="left">Hybrid</td>
<td align="left">
<xref ref-type="bibr" rid="B25">Luo et al. (2017)</xref>
</td>
</tr>
<tr>
<td align="left">Paper cups pyrolysis</td>
<td align="left">15</td>
<td align="left">Metallic thermocouple</td>
<td align="left">No change</td>
<td align="left">No change</td>
<td align="left">At a high heating rate, decomposition of cellulose was direct from feedstock to products rather than producing intermediates</td>
<td align="left">Hybrid</td>
<td align="left">
<xref ref-type="bibr" rid="B10">Dom&#xed;nguez et al. (2007)</xref>
</td>
</tr>
<tr>
<td align="left">NaBH<sub>4</sub> hydrolysis</td>
<td align="left">15</td>
<td align="left">NA</td>
<td align="left">&#x2193;</td>
<td align="left">&#x2193;</td>
<td align="left">By increasing heating rate under MW irradiation, reaction order decreased</td>
<td align="left">Direct</td>
<td align="left">
<xref ref-type="bibr" rid="B42">Yang et al. (2020)</xref>
</td>
</tr>
<tr>
<td align="left">Synthesis of phytosterol esters</td>
<td align="left">200&#xa0;ml</td>
<td align="left">NA</td>
<td align="left">&#x2193;</td>
<td align="left">&#x2191;<xref ref-type="table-fn" rid="Tfn8">
<sup>b</sup>
</xref>
</td>
<td align="left">NA</td>
<td align="left">Direct</td>
<td align="left">
<xref ref-type="bibr" rid="B29">Perry et al. (2002)</xref>
</td>
</tr>
</tbody>
</table>
<table-wrap-foot>
<fn id="Tfn4">
<label>
<sup>a</sup>
</label>
<p>: decreasing,</p>
</fn>
<fn id="Tfn5">
<label>
<sup>b</sup>
</label>
<p>: increasing,</p>
</fn>
<fn id="Tfn6">
<label>
<sup>c</sup>
</label>
<p>: shrinking core model,</p>
</fn>
<fn id="Tfn7">
<label>
<sup>d</sup>
</label>
<p>: volume reaction model,</p>
</fn>
<fn id="Tfn8">
<label>
<sup>e</sup>
</label>
<p>: infrared.</p>
</fn>
</table-wrap-foot>
</table-wrap>
</sec>
<sec id="s3">
<title>Potential sources of discrepancy</title>
<p>Variations of reaction kinetic parameters in multiphase reactions under MW heating compared to conventional heating have potential reasons, such as reactor diameter/sample amount in a kinetic study (<xref ref-type="bibr" rid="B6">Benzennou et al., 2020a</xref>), heating approach (direct or hybrid) (<xref ref-type="bibr" rid="B33">Ren et al., 2022</xref>), temperature measurement (<xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>; <xref ref-type="bibr" rid="B33">Ren et al., 2022</xref>), physical structure variation due to materials exposure to MWs (<xref ref-type="bibr" rid="B3">Amini et al., 2019</xref>), and interaction of MWs with polar molecules and free radicals (<xref ref-type="bibr" rid="B39">Wan et al., 2022</xref>). These sources are discussed below.</p>
<sec id="s3-1">
<title>Effects of reactor diameter/sample amount and heating approach</title>
<p>The uniform temperature distribution in the reaction domain is essential to increase the accuracy of estimated kinetic parameters. Temperature non-uniformity in the bed is observed on both the macro-scale and micro-scale. The macro-scale temperature gradient of the bed is changed by variation of the sample&#x2019;s location in the cavity, the ratio of the waveguide to cavity impedances, and materials properties (affecting penetration depth). The main reason for the micro-scale temperature non-uniformity/hot spots is the difference in dielectric properties of materials in the bed (<xref ref-type="bibr" rid="B31">Ramirez et al., 2017</xref>; <xref ref-type="bibr" rid="B2">Amini et al., 2021</xref>).</p>
<p>Smaller reactor sizes and a few grams of solid mass are preferred to have a more uniform temperature distribution (see <xref ref-type="fig" rid="F1">Figure 1</xref>), while effects of external and internal mass transfer limitations are eliminated/minimized either by increasing gas/liquid velocity or decreasing particle size, respectively (<xref ref-type="bibr" rid="B6">Benzennou et al., 2020a</xref>). To provide a uniform temperature distribution, we recommend applying a reactor diameter smaller than 10&#xa0;mm (around 1/12 of MW wavelength at a frequency of 2.45&#xa0;GHz), in fixed bed reactors adopted for intrinsic kinetic studies. In addition, employing fluidized bed reactors is another solution for an accurate kinetic study due to minimizing temperature non-uniformity (<xref ref-type="bibr" rid="B15">Farag and Chaouki, 2015</xref>; <xref ref-type="bibr" rid="B35">Samih and Chaouki, 2015</xref>). Impedance matching between the waveguide and cavity eliminates microwave reflection and minimizes the bed&#x2019;s macro-scale temperature gradient.</p>
<fig id="F1" position="float">
<label>FIGURE 1</label>
<caption>
<p>Effect of the internal reactor diameter (15 and 70&#xa0;mm) on temperature distribution in a mixture of paper cups and graphite (adapted from ref. (<xref ref-type="bibr" rid="B6">Benzennou et al., 2020a</xref>)).</p>
</caption>
<graphic xlink:href="fceng-04-1059160-g001.tif"/>
</fig>
<p>Heating of materials with weak MW interactions, e.g., plastics and biomass, in MW heating systems is challenging (<xref ref-type="bibr" rid="B33">Ren et al., 2022</xref>). Therefore, the hybrid heating approach is typically applied. However, due to variations in dielectric properties, it forms hot spots at MW receptors in the bed. For instance, pyrolysis of 40&#xa0;g of waste printed circuit board in a MW-thermogravimetric analyzer resulted in both macro- and micro-scale hot spots during MW-assisted hybrid heating (<xref ref-type="bibr" rid="B38">Sun et al., 2012</xref>). In addition, MW-assisted pyrolysis of bamboo sawdust in a fixed bed reactor with a diameter of 45&#xa0;mm (around 1/3 of the MW wavelength at 2.45&#xa0;GHz) resulted in the formation of macro-scale hot spots (<xref ref-type="bibr" rid="B11">Dong and Xiong, 2014</xref>).</p>
</sec>
<sec id="s3-2">
<title>Effect of temperature measurement</title>
<p>Most MW reactors work based on temperature control mode, where the sample is heated to and kept at the desired temperature by coupling the feedback from an appropriate temperature measurement technique to the impedance tuner in the MW waveguide (<xref ref-type="bibr" rid="B22">Kappe, 2013</xref>; <xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>). However, accurate temperature measurement of the gas/liquid and solid phases under MW heating is one of the critical issues in kinetic studies (<xref ref-type="bibr" rid="B22">Kappe, 2013</xref>; <xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>). If the temperature is underestimated, the kinetic results show a fake enhancement.</p>
<p>Currently, no technique can accurately measure the gas/liquid and solid local temperatures during MW heating (<xref ref-type="bibr" rid="B26">Nguyen et al., 2020</xref>). Various techniques, including grounded and shielded metallic thermocouples (<xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>), fiber optic probes (<xref ref-type="bibr" rid="B22">Kappe, 2013</xref>), IR (<xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>), polymeric (<xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>), molecular (<xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>), and air thermometers (<xref ref-type="bibr" rid="B15">Farag and Chaouki, 2015</xref>), as well as radiometry methods (<xref ref-type="bibr" rid="B26">Nguyen et al., 2020</xref>), are employed in MW heated reactions. For kinetic studies, we need at least one contact sensor, e.g., thermocouple and fiber optic probe, or some other MW transparent sensors, to track the temperature changes during MW treatment of multiphase systems (<xref ref-type="bibr" rid="B17">Gangurde et al., 2017</xref>). Critical remarks regarding different temperature measurement techniques for MW heating systems are summarized in <xref ref-type="table" rid="T3">Table 3</xref>.</p>
<table-wrap id="T3" position="float">
<label>TABLE 3</label>
<caption>
<p>Temperature measurement techniques in MW processing.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th align="left">Technique</th>
<th align="left">Main remarks</th>
<th align="left">Ref.</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td rowspan="2" align="left">Polymeric thermometer</td>
<td align="left">&#x2022;Limited for measuring the solid surface temperature</td>
<td rowspan="2" align="left">
<xref ref-type="bibr" rid="B17">Gangurde et al. (2017)</xref>
</td>
</tr>
<tr>
<td align="left">&#x2022;Inaccurate for gas-phase temperature measurement, especially during a reaction</td>
</tr>
<tr>
<td align="left">Molecular thermometer</td>
<td align="left">&#x2022;Unsuitable for gas-solid reactions</td>
<td align="left">
<xref ref-type="bibr" rid="B17">Gangurde et al. (2017)</xref>
</td>
</tr>
<tr>
<td rowspan="3" align="left">Metallic thermocouple</td>
<td align="left">&#x2022;Interference with MWs</td>
<td rowspan="3" align="left">
<xref ref-type="bibr" rid="B17">Gangurde et al. (2017)</xref>
</td>
</tr>
<tr>
<td align="left">&#x2022;Spark formation</td>
</tr>
<tr>
<td align="left">&#x2022;The difficulty in measuring local hot-spots temperature</td>
</tr>
<tr>
<td rowspan="5" align="left">Fiber optic probes</td>
<td align="left">&#x2022;More accurate than IR and metallic thermocouples</td>
<td rowspan="5" align="left">
<xref ref-type="bibr" rid="B22">Kappe, (2013)</xref>
</td>
</tr>
<tr>
<td align="left">&#x2022;Immune to interference with MWs (depends on its design)</td>
</tr>
<tr>
<td align="left">&#x2022;Limited temperature measurement range (0&#x2013;300&#xb0;C)</td>
</tr>
<tr>
<td align="left">&#x2022;Fragile</td>
</tr>
<tr>
<td align="left">&#x2022;Expensive</td>
</tr>
<tr>
<td align="left">IR-thermography</td>
<td align="left">&#x2022;Inaccurate due to the emissivity change during the reactions</td>
<td align="left">
<xref ref-type="bibr" rid="B17">Gangurde et al. (2017)</xref>
</td>
</tr>
<tr>
<td align="left">Radiometry method</td>
<td align="left">&#x2022;Antenna made of planar printed steel that causes Interference with MWs</td>
<td align="left">
<xref ref-type="bibr" rid="B26">Nguyen et al. (2020)</xref>
</td>
</tr>
<tr>
<td rowspan="3" align="left">Air thermometer</td>
<td align="left">&#x2022;No interference with MWs</td>
<td rowspan="3" align="left">
<xref ref-type="bibr" rid="B15">Farag and Chaouki, (2015)</xref>
</td>
</tr>
<tr>
<td align="left">&#x2022;The difficulty in measuring local hot-spots temperature</td>
</tr>
<tr>
<td align="left">&#x2022;Fragile</td>
</tr>
</tbody>
</table>
</table-wrap>
</sec>
<sec id="s3-3">
<title>Effect of MWs interactions with polar molecules and free radicals</title>
<p>The activation energy is a characteristic of a chemical reaction implying the minimum required energy to initiate the reaction between reactants. Thus, a deep insight into the interactions (e.g., vibrations, disassociations, etc.) at an atomic scale under MW irradiation is essential to investigate their dependency on MWs. In liquid-solid reactions under MW irradiation, literature reported improvement in the kinetic. However, this improvement can be either due to hot spots formation in presence of solid/catalyst or dipolar/ionic molecules movement. For instance, Patil et al. (<xref ref-type="bibr" rid="B28">Patil et al., 2011</xref>) reported that the reaction rate constant for MW-assisted transesterification of oil on Barium oxide (BaO) catalyst is two order of magnitude higher than that for the conventional reaction. Although they provided no discussion/justification, it seems that they ignored the potential interaction between BaO catalyst and MWs that leads to a higher temperature at the catalyst surface compared to the bulk temperature (i.e., hot spot formation). BaO is a non-polar dielectric material with potential defects, including vacancies and interstitials, which couple with MWs to convert its energy into heat (<xref ref-type="bibr" rid="B23">Khujaev et al., 2013</xref>). Khujaev et al. (<xref ref-type="bibr" rid="B14">Ekinci et al., 2022</xref>) reported that the complete dissolution of BaO in hydrochloride acid under MW irradiation at 385&#xa0;W takes less than 2.5&#xa0;min, whereas it requires more than 20&#xa0;min in conventional heating methods, indicating a significant interaction between MWs and BaO. Accordingly, a higher reaction rate during MW transesterification is attributed to the higher local temperature at the catalyst surface compared to the measured temperature, i.e., the bulk temperature, whereas the catalyst temperature is the same as the bulk temperature during conventional heating (<xref ref-type="bibr" rid="B14">Ekinci et al., 2022</xref>).</p>
<p>In liquid-solid MW heating-assisted reaction systems, MWs interactions can potentially affect ions and polar molecules. These interactions might result in a variation of kinetic parameters compared to conventional heating. For instance, the activation energy of Sodium tetrahydridoborate (NaBH<sub>4</sub>) hydrolysis under MW heating (46.8&#xa0;kJ/mol) is lower than that obtained under the conventional heating approach (66.9&#xa0;kJ/mol) (<xref ref-type="bibr" rid="B42">Yang et al., 2020</xref>). The authors attributed this to the interaction between MW electric field and OH<sup>&#x2212;</sup> ions that accelerate hydrolysis, which was confirmed by a high-level pre-exponential factor (2.08&#xd7;10<sup>3</sup>&#xa0;L/mol.min) under MW irradiation. In the study by Yang et al. (<xref ref-type="bibr" rid="B7">Benzennou et al., 2020b</xref>), accelerating ions under MW heating was also reported. However, the MW absorption capability of the solid/catalyst was ignored in these studies. If the solid absorbs MWs, the improved kinetics in a liquid-solid system under MW irradiation is likely attributed to the formation of hot spots in the solid component, which provides a higher local temperature compared to the bulk. Moreover, the formation of intermediate products with MW interaction, which is locally heated, affected reaction kinetics by their rotation (<xref ref-type="bibr" rid="B10">Dom&#xed;nguez et al., 2007</xref>).</p>
<p>Unlike the gas phase, which is relatively transparent to MWs, liquid materials containing polar molecules or ions interact with MWs. Accordingly, a liquid ion&#x2019;s dipolar/rotational movement on a solid&#x2019;s surface can change the reaction pathway/mechanism (<xref ref-type="bibr" rid="B42">Yang et al., 2020</xref>). However, further theoretical/experimental investigations are needed to study the interaction of ions and polar intermediate with MWs in liquid-solid systems.</p>
</sec>
</sec>
<sec id="s4">
<title>Future study</title>
<p>The development of new temperature measurement techniques, preferably non-intrusive ones, e.g., wireless thermometers, for local temperature measurement in MW systems is essential. In addition, the morphology variation of solid materials should be monitored under MW heating processes. Applying computational approaches like density functional theory (DFT), to investigate the effect of EM field on polar molecules in solid-liquid systems and consequently its impact on reaction kinetics/mechanism is an important concept that needs to be covered in future studies.</p>
</sec>
<sec sec-type="conclusion" id="s5">
<title>Conclusion</title>
<p>The effect of MW heating on the kinetic parameters of gas/liquid-solid reactions was reported in the literature. Underestimation and even sometimes overestimation of the reaction temperature in the reaction domain due to hot spots formation at micro and macro scales, and difficulty in measurement of these temperatures are the main sources of discrepancy in MW heating kinetic studies. Therefore, to the best of the authors&#x2019; knowledge, there is no evidence in the literature confirming the presence of the non-thermal effect of MWs on the kinetics of gas-solid reactions, by now. Fixed bed reactors with a smaller diameter, e.g., 10&#xa0;mm or operation under fluidized bed mode are suggested for kinetic studies to avoid noticeable temperature gradients within the reactor. However, changing the morphology of solid materials under MW heating can affect apparent kinetic parameters when the internal mass transfer controls the reaction rate. In liquid-solid systems with ions and polar molecules, electromagnetic fields likely accelerate the molecule&#x2019;s movement, which might affect the reaction rate. The interaction of MWs with solid/catalyst should also be considered for potential hot spot formation to avoid an inaccurate reaction kinetics evaluation.</p>
</sec>
</body>
<back>
<sec id="s6">
<title>Author contributions</title>
<p>KA: Reviewed the literature, write the manuscript, revised the manuscript, discussed and concluded the findings AA: Reviewed the literature, write the manuscript, revised the manuscript, discussed and concluded the findings ML: Reviewed the literature, reviewed the manuscript, revised the manuscript, discussed and concluded the findings. JS: Reviewed the manuscript, revised the manuscript, discussed and concluded the findings. JC: Reviewed the manuscript, discussed and concluded the findings.</p>
</sec>
<sec sec-type="COI-statement" id="s7">
<title>Conflict of interest</title>
<p>Author JS was employed by the company Heirloom.</p>
<p>The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.</p>
</sec>
<sec sec-type="disclaimer" id="s8">
<title>Publisher&#x2019;s note</title>
<p>All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.</p>
</sec>
<ref-list>
<title>References</title>
<ref id="B1">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Adnadjevic</surname>
<given-names>B. K.</given-names>
</name>
<name>
<surname>Jovanovic</surname>
<given-names>J. D.</given-names>
</name>
</person-group> (<year>2012</year>). <article-title>Kinetics of isothermal ethanol adsorption onto a carbon molecular sieve under conventional and microwave heating</article-title>. <source>Chem. Eng. Technol.</source> <volume>35</volume>, <fpage>761</fpage>&#x2013;<lpage>768</lpage>. <pub-id pub-id-type="doi">10.1002/ceat.201100153</pub-id> </citation>
</ref>
<ref id="B2">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Amini</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Latifi</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Chaouki</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Electrification of materials processing via microwave irradiation : A review of mechanism and applications</article-title>. <source>Appl. Therm. Eng.</source> <volume>193</volume>, <fpage>117003</fpage>. <pub-id pub-id-type="doi">10.1016/j.applthermaleng.2021.117003</pub-id> </citation>
</ref>
<ref id="B3">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Amini</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Ohno</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Maeda</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Kunitomo</surname>
<given-names>K.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>A kinetic comparison between microwave heating and conventional heating of FeS-CaO mixture during hydrogen-reduction</article-title>. <source>Chem. Eng. J.</source> <volume>374</volume>, <fpage>648</fpage>&#x2013;<lpage>657</lpage>. <pub-id pub-id-type="doi">10.1016/j.cej.2019.05.226</pub-id> </citation>
</ref>
<ref id="B4">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Bai</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Muley</surname>
<given-names>P. D.</given-names>
</name>
<name>
<surname>Musho</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Abdelsayed</surname>
<given-names>V.</given-names>
</name>
<name>
<surname>Robinson</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Caiola</surname>
<given-names>A.</given-names>
</name>
<etal/>
</person-group> (<year>2022</year>). <article-title>A combined experimental and modeling study of Microwave-assisted methane dehydroaromatization process</article-title>. <source>Chem. Eng. J.</source> <volume>433</volume>, <fpage>134445</fpage>. <pub-id pub-id-type="doi">10.1016/j.cej.2021.134445</pub-id> </citation>
</ref>
<ref id="B5">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Bai</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Robinson</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Killmer</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Li</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Hu</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Microwave catalytic reactor for upgrading stranded shale gas to aromatics</article-title>. <source>Fuel</source> <volume>243</volume>, <fpage>485</fpage>&#x2013;<lpage>492</lpage>. <pub-id pub-id-type="doi">10.1016/j.fuel.2019.01.147</pub-id> </citation>
</ref>
<ref id="B6">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Benzennou</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Laviolette</surname>
<given-names>J. P.</given-names>
</name>
<name>
<surname>Chaouki</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Kinetic study of microwave pyrolysis of paper cups and comparison with calcium oxide catalyzed reaction</article-title>. <source>AIChE J.</source> <volume>65</volume>, <fpage>16471</fpage>. <pub-id pub-id-type="doi">10.1002/aic.16471</pub-id> </citation>
</ref>
<ref id="B7">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Benzennou</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Laviolette</surname>
<given-names>J. P.</given-names>
</name>
<name>
<surname>Chaouki</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Microwave effect on kinetics of paper cups pyrolysis</article-title>. <source>Can. J. Chem. Eng.</source> <volume>98</volume>, <fpage>1757</fpage>&#x2013;<lpage>1766</lpage>. <pub-id pub-id-type="doi">10.1002/cjce.23752</pub-id> </citation>
</ref>
<ref id="B8">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Bi</surname>
<given-names>X. j.</given-names>
</name>
<name>
<surname>Hong</surname>
<given-names>P. j.</given-names>
</name>
<name>
<surname>Xie</surname>
<given-names>X. g.</given-names>
</name>
<name>
<surname>Dai</surname>
<given-names>S. s.</given-names>
</name>
</person-group> (<year>1999</year>). <article-title>Microwave effect on partial oxidation of methane to syngas</article-title>. <source>React. Kinet. Catal. Lett.</source> <volume>66</volume>, <fpage>381</fpage>&#x2013;<lpage>386</lpage>. <pub-id pub-id-type="doi">10.1007/bf02475816</pub-id> </citation>
</ref>
<ref id="B9">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chen</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Zhu</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Xu</surname>
<given-names>W.</given-names>
</name>
<name>
<surname>Chen</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Zhou</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>Highly efficient H2 and S production from H2 S decomposition via microwave catalysis over a family of TiO2 modified MoxC microwave catalysts</article-title>. <source>Fuel Process. Technol.</source> <volume>226</volume>, <fpage>107069</fpage>. <pub-id pub-id-type="doi">10.1016/j.fuproc.2021.107069</pub-id> </citation>
</ref>
<ref id="B10">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Dom&#xed;nguez</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Fidalgo</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Fern&#xe1;ndez</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Pis</surname>
<given-names>J. J.</given-names>
</name>
<name>
<surname>Men&#xe9;ndez</surname>
<given-names>J. A.</given-names>
</name>
</person-group> (<year>2007</year>). <article-title>Microwave-assisted catalytic decomposition of methane over activated carbon for CO2CO2-free hydrogen production</article-title>. <source>Int. J. Hydrogen Energy</source> <volume>32</volume>, <fpage>4792</fpage>&#x2013;<lpage>4799</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijhydene.2007.07.041</pub-id> </citation>
</ref>
<ref id="B11">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Dong</surname>
<given-names>Q.</given-names>
</name>
<name>
<surname>Xiong</surname>
<given-names>Y.</given-names>
</name>
</person-group> (<year>2014</year>). <article-title>Kinetics study on conventional and microwave pyrolysis of moso bamboo</article-title>. <source>Bioresour. Technol.</source> <volume>171</volume>, <fpage>127</fpage>&#x2013;<lpage>131</lpage>. <pub-id pub-id-type="doi">10.1016/j.biortech.2014.08.063</pub-id> </citation>
</ref>
<ref id="B12">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Durka</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Stefanidis</surname>
<given-names>G. D.</given-names>
</name>
<name>
<surname>Van Gerven</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Stankiewicz</surname>
<given-names>A. I.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>Microwave-activated methanol steam reforming for hydrogen production</article-title>. <source>Int. J. Hydrogen Energy</source> <volume>36</volume>, <fpage>12843</fpage>&#x2013;<lpage>12852</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijhydene.2011.07.009</pub-id> </citation>
</ref>
<ref id="B13">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Einaga</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Nasu</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Oda</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Saito</surname>
<given-names>H.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Catalytic performances of perovskite oxides for CO oxidation under microwave irradiation</article-title>. <source>Chem. Eng. J.</source> <volume>283</volume>, <fpage>97</fpage>&#x2013;<lpage>104</lpage>. <pub-id pub-id-type="doi">10.1016/j.cej.2015.07.051</pub-id> </citation>
</ref>
<ref id="B14">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ekinci</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>&#x15e;ahin</surname>
<given-names>&#xd6;.</given-names>
</name>
<name>
<surname>Horoz</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>Kinetics of catalytic hydrolysis of NaBH4 solution: Ni-La-B catalyst</article-title>. <source>J. Aust. Ceram. Soc.</source> <volume>58</volume>, <fpage>113</fpage>&#x2013;<lpage>121</lpage>. <pub-id pub-id-type="doi">10.1007/s41779-021-00673-3</pub-id> </citation>
</ref>
<ref id="B15">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Farag</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Chaouki</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>A modified microwave thermo-gravimetric-analyzer for kinetic purposes</article-title>. <source>Appl. Therm. Eng.</source> <volume>75</volume>, <fpage>65</fpage>&#x2013;<lpage>72</lpage>. <pub-id pub-id-type="doi">10.1016/j.applthermaleng.2014.09.038</pub-id> </citation>
</ref>
<ref id="B16">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Fukushima</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Kashimura</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Takayama</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Sato</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Sano</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Hayashi</surname>
<given-names>Y.</given-names>
</name>
<etal/>
</person-group> (<year>2013</year>). <article-title>
<italic>In-situ</italic> kinetic study on non-thermal reduction reaction of CuO during microwave heating</article-title>. <source>Mat. Lett.</source> <volume>91</volume>, <fpage>252</fpage>&#x2013;<lpage>254</lpage>. <pub-id pub-id-type="doi">10.1016/j.matlet.2012.09.114</pub-id> </citation>
</ref>
<ref id="B17">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gangurde</surname>
<given-names>L. S.</given-names>
</name>
<name>
<surname>Sturm</surname>
<given-names>G. S. J.</given-names>
</name>
<name>
<surname>Devadiga</surname>
<given-names>T. J.</given-names>
</name>
<name>
<surname>Stankiewicz</surname>
<given-names>A. I.</given-names>
</name>
<name>
<surname>Stefanidis</surname>
<given-names>G. D.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Complexity and challenges in noncontact high temperature measurements in microwave-assisted catalytic reactors</article-title>. <source>Ind. Eng. Chem. Res.</source> <volume>56</volume>, <fpage>13379</fpage>&#x2013;<lpage>13391</lpage>. <pub-id pub-id-type="doi">10.1021/acs.iecr.7b02091</pub-id> </citation>
</ref>
<ref id="B18">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Gupta</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Leong</surname>
<given-names>W. W.</given-names>
</name>
</person-group> (<year>2007</year>). <source>Microwaves and metals</source>. <publisher-loc>Singapore</publisher-loc>: <publisher-name>John Wiley &#x0026; Sons (Asia) Pte Ltd</publisher-name>. </citation>
</ref>
<ref id="B19">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Hamzehlouia</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Shabanian</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Latifi</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Chaouki</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2018</year>). <article-title>Effect of microwave heating on the performance of catalytic oxidation of n-butane in a gas-solid fluidized bed reactor</article-title>. <source>Chem. Eng. Sci.</source> <volume>192</volume>, <fpage>1177</fpage>&#x2013;<lpage>1188</lpage>. <pub-id pub-id-type="doi">10.1016/j.ces.2018.08.054</pub-id> </citation>
</ref>
<ref id="B20">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Hu</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Wild</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Stiegman</surname>
<given-names>A. E.</given-names>
</name>
<name>
<surname>Dagle</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>Shekhawat</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Abdelsayed</surname>
<given-names>V.</given-names>
</name>
<etal/>
</person-group> (<year>2020</year>). <article-title>Microwave-driven heterogeneous catalysis for activation of dinitrogen to ammonia under atmospheric pressure</article-title>. <source>Chem. Eng. J.</source> <volume>397</volume>, <fpage>125388</fpage>. <pub-id pub-id-type="doi">10.1016/j.cej.2020.125388</pub-id> </citation>
</ref>
<ref id="B21">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Huang</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Chiueh</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Kuan</surname>
<given-names>W.</given-names>
</name>
<name>
<surname>Lo</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Microwave pyrolysis of lignocellulosic biomass : Heating performance and reaction kinetics</article-title>. <source>Energy</source> <volume>100</volume>, <fpage>137</fpage>&#x2013;<lpage>144</lpage>. <pub-id pub-id-type="doi">10.1016/j.energy.2016.01.088</pub-id> </citation>
</ref>
<ref id="B22">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kappe</surname>
<given-names>C. O.</given-names>
</name>
</person-group> (<year>2013</year>). <article-title>How to measure reaction temperature in microwave-heated transformations</article-title>. <source>Chem. Soc. Rev.</source> <volume>42</volume>, <fpage>4977</fpage>&#x2013;<lpage>4990</lpage>. <pub-id pub-id-type="doi">10.1039/c3cs00010a</pub-id> </citation>
</ref>
<ref id="B23">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Khujaev</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Vasidov</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Markelova</surname>
<given-names>E. A.</given-names>
</name>
</person-group> (<year>2013</year>). <article-title>Extraction of the 131Cs from neutron irradiated barium oxide under microwave radiation</article-title>. <source>J. Radioanal. Nucl. Chem.</source> <volume>298</volume>, <fpage>435</fpage>&#x2013;<lpage>438</lpage>. <pub-id pub-id-type="doi">10.1007/s10967-013-2687-4</pub-id> </citation>
</ref>
<ref id="B24">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Liu</surname>
<given-names>Q.</given-names>
</name>
<name>
<surname>He</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Li</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Jia</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Huang</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Xing</surname>
<given-names>B.</given-names>
</name>
<etal/>
</person-group> (<year>2019</year>). <article-title>Characteristics and kinetics of coal char steam gasification under microwave heating</article-title>. <source>Fuel</source> <volume>256</volume>, <fpage>115899</fpage>. <pub-id pub-id-type="doi">10.1016/j.fuel.2019.115899</pub-id> </citation>
</ref>
<ref id="B25">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Luo</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Bao</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Kong</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Sun</surname>
<given-names>Y.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Low temperature microwave-assisted pyrolysis of wood sawdust for phenolic rich compounds: Kinetics and dielectric properties analysis</article-title>. <source>Bioresour. Technol.</source> <volume>238</volume>, <fpage>109</fpage>&#x2013;<lpage>115</lpage>. <pub-id pub-id-type="doi">10.1016/j.biortech.2017.04.030</pub-id> </citation>
</ref>
<ref id="B26">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Nguyen</surname>
<given-names>H. M.</given-names>
</name>
<name>
<surname>Sunarso</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Li</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Pham</surname>
<given-names>G. H.</given-names>
</name>
<name>
<surname>Phan</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Microwave-assisted catalytic methane reforming: A review</article-title>. <source>Appl. Catal. A General</source> <volume>599</volume>, <fpage>117620</fpage>. <pub-id pub-id-type="doi">10.1016/j.apcata.2020.117620</pub-id> </citation>
</ref>
<ref id="B27">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Omran</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Fabritius</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Heikkinen</surname>
<given-names>E.</given-names>
</name>
<name>
<surname>Vuolio</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Yu</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Chen</surname>
<given-names>G.</given-names>
</name>
<etal/>
</person-group> (<year>2020</year>). <article-title>Microwave catalyzed carbothermic reduction of zinc oxide and zinc ferrite : Effect of microwave energy on the reaction activation energy</article-title>. <source>RSC Adv.</source> <volume>10</volume>, <fpage>23959</fpage>&#x2013;<lpage>23968</lpage>. <pub-id pub-id-type="doi">10.1039/d0ra04574h</pub-id> </citation>
</ref>
<ref id="B28">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Patil</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Gude</surname>
<given-names>V. G.</given-names>
</name>
<name>
<surname>Pinappu</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Deng</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>Transesterification kinetics of Camelina sativa oil on metal oxide catalysts under conventional and microwave heating conditions</article-title>. <source>Chem. Eng. J.</source> <volume>168</volume>, <fpage>1296</fpage>&#x2013;<lpage>1300</lpage>. <pub-id pub-id-type="doi">10.1016/j.cej.2011.02.030</pub-id> </citation>
</ref>
<ref id="B29">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Perry</surname>
<given-names>W. L.</given-names>
</name>
<name>
<surname>Datye</surname>
<given-names>A. K.</given-names>
</name>
<name>
<surname>Prinja</surname>
<given-names>A. K.</given-names>
</name>
<name>
<surname>Brown</surname>
<given-names>L. F.</given-names>
</name>
<name>
<surname>Katz</surname>
<given-names>J. D.</given-names>
</name>
</person-group> (<year>2002</year>). <article-title>Microwave heating of endothermic catalytic reactions : Reforming of methanol</article-title>. <source>AIChE J.</source> <volume>48</volume>, <fpage>820</fpage>&#x2013;<lpage>831</lpage>. <pub-id pub-id-type="doi">10.1002/aic.690480416</pub-id> </citation>
</ref>
<ref id="B30">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Pham</surname>
<given-names>T. T. P.</given-names>
</name>
<name>
<surname>Ro</surname>
<given-names>K. S.</given-names>
</name>
<name>
<surname>Chen</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Mahajan</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Ji</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Ashik</surname>
<given-names>S. U. P. M.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Microwave - assisted dry reforming of methane for syngas production : A review</article-title>. <source>Environ. Chem. Lett.</source> <volume>18</volume>, <fpage>23</fpage>. <pub-id pub-id-type="doi">10.1007/s10311-020-01055-0</pub-id> </citation>
</ref>
<ref id="B31">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ramirez</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Hueso</surname>
<given-names>J. L.</given-names>
</name>
<name>
<surname>Mallada</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Santamaria</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>
<italic>In situ</italic> temperature measurements in microwave-heated gas-solid catalytic systems . Detection of hot spots and solid-fluid temperature gradients in the ethylene epoxidation reaction</article-title>. <source>Chem. Eng. J.</source> <volume>316</volume>, <fpage>50</fpage>&#x2013;<lpage>60</lpage>. <pub-id pub-id-type="doi">10.1016/j.cej.2017.01.077</pub-id> </citation>
</ref>
<ref id="B32">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ramirez</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Hueso</surname>
<given-names>J. L.</given-names>
</name>
<name>
<surname>Mallada</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Santamaria</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Microwave-activated structured reactors to maximize propylene selectivity in the oxidative dehydrogenation of propane</article-title>. <source>Chem. Eng. J.</source> <volume>393</volume>, <fpage>124746</fpage>. <pub-id pub-id-type="doi">10.1016/j.cej.2020.124746</pub-id> </citation>
</ref>
<ref id="B33">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ren</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Shanb</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Zhu</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Ao</surname>
<given-names>W.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Moreside</surname>
<given-names>E.</given-names>
</name>
<etal/>
</person-group> (<year>2022</year>). <article-title>Challenges and opportunities in microwave-assisted catalytic pyrolysis of biomass : A review</article-title>. <source>Appl. Energy</source> <volume>315</volume>, <fpage>118970</fpage>. <pub-id pub-id-type="doi">10.1016/j.apenergy.2022.118970</pub-id> </citation>
</ref>
<ref id="B34">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Robinson</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Caiola</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Bai</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Abdelsayed</surname>
<given-names>V.</given-names>
</name>
<name>
<surname>Shekhawat</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Hu</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Catalytic direct conversion of ethane to value-added chemicals under microwave irradiation</article-title>. <source>Catal. Today</source> <volume>356</volume>, <fpage>3</fpage>&#x2013;<lpage>10</lpage>. <pub-id pub-id-type="doi">10.1016/j.cattod.2020.03.001</pub-id> </citation>
</ref>
<ref id="B35">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Samih</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Chaouki</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Development of a fluidized bed thermogravimetric analyzer</article-title>. <source>AIChE J.</source> <volume>61</volume>, <fpage>84</fpage>&#x2013;<lpage>89</lpage>. <pub-id pub-id-type="doi">10.1002/aic.14637</pub-id> </citation>
</ref>
<ref id="B36">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>She-bin</surname>
<given-names>W.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>S. b.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>J. y.</given-names>
</name>
<name>
<surname>Zhou</surname>
<given-names>J. x.</given-names>
</name>
</person-group> (<year>2008</year>). <article-title>Kinetics of voluminal reduction of chromium ore fines containing coal by microwave heating</article-title>. <source>J. Iron Steel Res. Int.</source> <volume>15</volume>, <fpage>10</fpage>&#x2013;<lpage>15</lpage>. <pub-id pub-id-type="doi">10.1016/S1006-706X(08)60258-7</pub-id> </citation>
</ref>
<ref id="B37">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Stefanidis</surname>
<given-names>G. D.</given-names>
</name>
<name>
<surname>Munoz</surname>
<given-names>A. N.</given-names>
</name>
<name>
<surname>Sturm</surname>
<given-names>G. S.</given-names>
</name>
<name>
<surname>Stankiewicz</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2014</year>). <article-title>A helicopter view of microwave application to chemical processes : Reactions , separations , and equipment concepts</article-title>. <source>Rev. Chem. Eng.</source> <volume>30</volume>, <fpage>33</fpage>. <pub-id pub-id-type="doi">10.1515/revce-2013-0033</pub-id> </citation>
</ref>
<ref id="B38">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Sun</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>W.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>Z.</given-names>
</name>
<name>
<surname>Ma</surname>
<given-names>Q.</given-names>
</name>
<name>
<surname>Zhao</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Ma</surname>
<given-names>C.</given-names>
</name>
</person-group> (<year>2012</year>). <article-title>Kinetic study of the pyrolysis of waste printed circuit boards subject to conventional and microwave heating</article-title>. <source>Energies (Basel)</source> <volume>5</volume>, <fpage>3295</fpage>&#x2013;<lpage>3306</lpage>. <pub-id pub-id-type="doi">10.3390/en5093295</pub-id> </citation>
</ref>
<ref id="B39">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Wan</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Yue</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Notarangelo</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Che</surname>
<given-names>F.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>Deep learning-assisted investigation of electric Field&#x2212;Dipole effects on catalytic ammonia synthesis</article-title>. <source>JACS Au</source> <volume>2</volume>, <fpage>1338</fpage>&#x2013;<lpage>1349</lpage>. <pub-id pub-id-type="doi">10.1021/jacsau.2c00003</pub-id> </citation>
</ref>
<ref id="B40">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Xia</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Zhao</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Zhou</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Feng</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Ma</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Song</surname>
<given-names>Z.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Reduction of SO2 to elemental sulfur with carbon materials through electrical and microwave heating methods</article-title>. <source>Chem. Eng. Process. - Process Intensif.</source> <volume>150</volume>, <fpage>107877</fpage>. <pub-id pub-id-type="doi">10.1016/j.cep.2020.107877</pub-id> </citation>
</ref>
<ref id="B41">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>G. D.</given-names>
</name>
<name>
<surname>V Borkar</surname>
<given-names>I.</given-names>
</name>
</person-group> (<year>2006</year>). <article-title>Kinetic modeling of microwave-assisted chemoenzymatic epoxidation of styrene</article-title>. <source>AIChE J.</source> <volume>52</volume>, <fpage>1235</fpage>&#x2013;<lpage>1247</lpage>. <pub-id pub-id-type="doi">10.1002/aic.10700</pub-id> </citation>
</ref>
<ref id="B42">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yang</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Cheng</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Jia</surname>
<given-names>G.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Microwave heating and non-thermal effects of sodium chloride aqueous solution</article-title>. <source>Mol. Phys.</source> <volume>8976</volume>, <fpage>e1662505</fpage>. <pub-id pub-id-type="doi">10.1080/00268976.2019.1662505</pub-id> </citation>
</ref>
<ref id="B43">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Zhang</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Wu</surname>
<given-names>Z.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>R.</given-names>
</name>
<etal/>
</person-group> (<year>2022</year>). <article-title>Microwave-assisted catalytic synthesis of phytosterol esters</article-title>. <source>Int. J. Food Sci. Technol.</source> <volume>57</volume>, <fpage>3162</fpage>&#x2013;<lpage>3170</lpage>. <pub-id pub-id-type="doi">10.1111/ijfs.15649</pub-id> </citation>
</ref>
</ref-list>
</back>
</article>