In the published article, there were errors in the Funding statement. The project name A2M2TECH was missing. An additional funding source, The Scientific and Technological Research Council of Türkiye, should also have been included. The correct Funding statement appears below:
“This work was supported by the Frontier Leading Technology Basic Research Project of Jiangsu (No. BK20202007), the National Natural Science Foundation of China (Grant No.52005262), BK20190463 and No. B18028. This work was also supported by the National Natural Science Foundation of China (grant number 51775281). This project has also received financial support from the European Union’s Horizon 2020 (H2020) research and innovation program under the Marie Skłodowska-Curie, grant agreement No. 764935. This work has also received funding from the H2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101034425 for the project titled A2M2TECH. This study has also received financial support from The Scientific and Technological Research Council of Türkiye (TUBITAK) with grant No 120C158 for the same A2M2TECH project under the TUBITAK’s 2236/B program.”
The authors apologize for these error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Statements
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Summary
Keywords
additive manufacturing, sintering, defects, ceramic, oxidation, laser processing
Citation
Ur Rehman A, Ullah A, Liu T, Ur Rehman R and Salamci MU (2023) Corrigendum: Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process. Front. Chem. 11:1266823. doi: 10.3389/fchem.2023.1266823
Received
25 July 2023
Accepted
26 July 2023
Published
02 August 2023
Approved by
Frontiers Editorial Office, Frontiers Media SA, Switzerland
Volume
11 - 2023
Updates
Copyright
© 2023 Ur Rehman, Ullah, Liu, Ur Rehman and Salamci.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Asif Ur Rehman, asyf.rehman@gmail.com; Abid Ullah, abidmech95@gmail.com; Tingting Liu, liutingting@njust.edu.cn
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.