Front. Chem. Frontiers in Chemistry Front. Chem. 2296-2646 Frontiers Media S.A. 1266823 10.3389/fchem.2023.1266823 Chemistry Correction Corrigendum: Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process Ur Rehman et al. 10.3389/fchem.2023.1266823 Ur Rehman Asif 1 2 3 * Ullah Abid 2 3 4 * Liu Tingting 5 * Ur Rehman Rashid 6 Salamci Metin U. 2 3 7 1 ERMAKSAN, Bursa, Türkiye 2 Department of Mechanical Engineering, Faculty of Engineering, Gazi University, Ankara, Türkiye 3 Additive Manufacturing Technologies Research and Application Center-EKTAM, Gazi University, Ankara, Türkiye 4 CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui, China 5 School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, Jiangsu, China 6 Incheon National University, Incheon, Republic of Korea 7 Advanced Manufacturing Technologies Center of Excellence- URTEMM, Ankara, Türkiye

Approved by: Frontiers Editorial Office, Frontiers Media SA, Switzerland

 *Correspondence: Asif Ur Rehman, asyf.rehman@gmail.com; Abid Ullah, abidmech95@gmail.com; Tingting Liu, liutingting@njust.edu.cn 02 08 2023 2023 11 1266823 25 07 2023 26 07 2023 Copyright © 2023 Ur Rehman, Ullah, Liu, Ur Rehman and Salamci. 2023 Ur Rehman, Ullah, Liu, Ur Rehman and Salamci

This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

 A Corrigendum on Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process by Ur Rehman A, Ullah A, Liu T, Ur Rehman R and Salamci MU (2023). Front. Chem. 11:1034473. doi: 10.3389/fchem.2023.1034473 additive manufacturing sintering defects ceramic oxidation laser processing section-at-acceptance Green and Sustainable Chemistry

In the published article, there were errors in the Funding statement. The project name A2M2TECH was missing. An additional funding source, The Scientific and Technological Research Council of Türkiye, should also have been included. The correct Funding statement appears below:

“This work was supported by the Frontier Leading Technology Basic Research Project of Jiangsu (No. BK20202007), the National Natural Science Foundation of China (Grant No.52005262), BK20190463 and No. B18028. This work was also supported by the National Natural Science Foundation of China (grant number 51775281). This project has also received financial support from the European Union’s Horizon 2020 (H2020) research and innovation program under the Marie Skłodowska-Curie, grant agreement No. 764935. This work has also received funding from the H2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101034425 for the project titled A2M2TECH. This study has also received financial support from The Scientific and Technological Research Council of Türkiye (TUBITAK) with grant No 120C158 for the same A2M2TECH project under the TUBITAK’s 2236/B program.”

The authors apologize for these error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.