<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing DTD v2.3 20070202//EN" "journalpublishing.dtd">
<article article-type="review-article" dtd-version="2.3" xml:lang="EN" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">
<front>
<journal-meta>
<journal-id journal-id-type="publisher-id">Front. Earth Sci.</journal-id>
<journal-title>Frontiers in Earth Science</journal-title>
<abbrev-journal-title abbrev-type="pubmed">Front. Earth Sci.</abbrev-journal-title>
<issn pub-type="epub">2296-6463</issn>
<publisher>
<publisher-name>Frontiers Media S.A.</publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id pub-id-type="publisher-id">1160448</article-id>
<article-id pub-id-type="doi">10.3389/feart.2023.1160448</article-id>
<article-categories>
<subj-group subj-group-type="heading">
<subject>Earth Science</subject>
<subj-group>
<subject>Review</subject>
</subj-group>
</subj-group>
</article-categories>
<title-group>
<article-title>Emerging trends in the recovery of ferrospheres and plerospheres from coal fly ash waste and their emerging applications in environmental cleanup</article-title>
<alt-title alt-title-type="left-running-head">Yadav et al.</alt-title>
<alt-title alt-title-type="right-running-head">
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.3389/feart.2023.1160448">10.3389/feart.2023.1160448</ext-link>
</alt-title>
</title-group>
<contrib-group>
<contrib contrib-type="author" corresp="yes">
<name>
<surname>Yadav</surname>
<given-names>Virendra Kumar</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<xref ref-type="aff" rid="aff2">
<sup>2</sup>
</xref>
<xref ref-type="corresp" rid="c001">&#x2a;</xref>
<uri xlink:href="https://loop.frontiersin.org/people/193265/overview"/>
</contrib>
<contrib contrib-type="author" corresp="yes">
<name>
<surname>Modi</surname>
<given-names>Timsi</given-names>
</name>
<xref ref-type="aff" rid="aff3">
<sup>3</sup>
</xref>
<xref ref-type="corresp" rid="c001">&#x2a;</xref>
<uri xlink:href="https://loop.frontiersin.org/people/2324238/overview"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Alyami</surname>
<given-names>Abeer Yousef</given-names>
</name>
<xref ref-type="aff" rid="aff4">
<sup>4</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Gacem</surname>
<given-names>Amel</given-names>
</name>
<xref ref-type="aff" rid="aff5">
<sup>5</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/1880921/overview"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Choudhary</surname>
<given-names>Nisha</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<xref ref-type="aff" rid="aff3">
<sup>3</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Yadav</surname>
<given-names>Krishna Kumar</given-names>
</name>
<xref ref-type="aff" rid="aff6">
<sup>6</sup>
</xref>
<xref ref-type="aff" rid="aff7">
<sup>7</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/1410561/overview"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Inwati</surname>
<given-names>Gajendra Kumar</given-names>
</name>
<xref ref-type="aff" rid="aff8">
<sup>8</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/1878566/overview"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Wanale</surname>
<given-names>Shivraj Gangadhar</given-names>
</name>
<xref ref-type="aff" rid="aff9">
<sup>9</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Abbas</surname>
<given-names>Mohamed</given-names>
</name>
<xref ref-type="aff" rid="aff10">
<sup>10</sup>
</xref>
</contrib>
<contrib contrib-type="author" corresp="yes">
<name>
<surname>Ji</surname>
<given-names>Min-Kyu</given-names>
</name>
<xref ref-type="aff" rid="aff11">
<sup>11</sup>
</xref>
<xref ref-type="corresp" rid="c001">&#x2a;</xref>
</contrib>
<contrib contrib-type="author" corresp="yes">
<name>
<surname>Jeon</surname>
<given-names>Byong-Hun</given-names>
</name>
<xref ref-type="aff" rid="aff12">
<sup>12</sup>
</xref>
<xref ref-type="corresp" rid="c001">&#x2a;</xref>
</contrib>
</contrib-group>
<aff id="aff1">
<sup>1</sup>
<institution>Department of Biosciences</institution>, <institution>School of Liberal Arts and Sciences</institution>, <institution>Mody University of Science and Technology</institution>, <addr-line>Sikar</addr-line>, <addr-line>Rajasthan</addr-line>, <country>India</country>
</aff>
<aff id="aff2">
<sup>2</sup>
<institution>Department of Life Sciences</institution>, <institution>Hemchandracharya North Gujarat University</institution>, <addr-line>Patan</addr-line>, <addr-line>Gujarat</addr-line>, <country>India</country>
</aff>
<aff id="aff3">
<sup>3</sup>
<institution>Department of Environment Sciences</institution>, <institution>School of Sciences</institution>, <institution>P P Savani University</institution>, <addr-line>Surat</addr-line>, <addr-line>Gujarat</addr-line>, <country>India</country>
</aff>
<aff id="aff4">
<sup>4</sup>
<institution>Department of Chemistry</institution>, <institution>College of Science and Arts</institution>, <institution>Najran University</institution>, <addr-line>Najran</addr-line>, <country>Saudi Arabia</country>
</aff>
<aff id="aff5">
<sup>5</sup>
<institution>Department of Physics</institution>, <institution>Faculty of Sciences</institution>, <institution>University 20 Ao&#xfb;t 1955</institution>, <addr-line>Skikda</addr-line>, <country>Algeria</country>
</aff>
<aff id="aff6">
<sup>6</sup>
<institution>Faculty of Science and Technology</institution>, <institution>Madhyanchal Professional University</institution>, <addr-line>Bhopal</addr-line>, <country>India</country>
</aff>
<aff id="aff7">
<sup>7</sup>
<institution>Environmental and Atmospheric Sciences Research Group</institution>, <institution>Scientific Research Center</institution>, <institution>Al-Ayen University</institution>, <institution>Thi-Qar</institution>, <addr-line>Nasiriyah</addr-line>, <country>Iraq</country>
</aff>
<aff id="aff8">
<sup>8</sup>
<institution>Department of Chemistry, Medicaps University</institution>, <addr-line>Indore</addr-line>, <addr-line>Madhya Pradesh</addr-line>, <country>India</country>
</aff>
<aff id="aff9">
<sup>9</sup>
<institution>School of Chemical Sciences, Swami Ramanand Teerth Marathwada University</institution>, <addr-line>Nanded</addr-line>, <addr-line>Maharashtra</addr-line>, <country>India</country>
</aff>
<aff id="aff10">
<sup>10</sup>
<institution>Electrical Engineering Department, College of Engineering, King Khalid University</institution>, <addr-line>Abha</addr-line>, <country>Saudi Arabia</country>
</aff>
<aff id="aff11">
<sup>11</sup>
<institution>Korea Environment Institute</institution>, <addr-line>Sejong</addr-line>, <country>Republic of Korea</country>
</aff>
<aff id="aff12">
<sup>12</sup>
<institution>Department of Earth Resources and Environmental Engineering</institution>, <institution>Hanyang University</institution>, <addr-line>Seoul</addr-line>, <country>Republic of Korea</country>
</aff>
<author-notes>
<fn fn-type="edited-by">
<p>
<bold>Edited by:</bold> <ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/2123578/overview">Narottam Saha</ext-link>, The University of Queensland, Australia</p>
</fn>
<fn fn-type="edited-by">
<p>
<bold>Reviewed by:</bold> <ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/1356718/overview">Daoud Ali</ext-link>, King Saud University, Saudi Arabia</p>
<p>
<ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/1319418/overview">Marina Cabral Pinto</ext-link>, University of Aveiro, Portugal</p>
</fn>
<corresp id="c001">&#x2a;Correspondence: Virendra Kumar Yadav, <email>yadava94@gmail.com</email>; Timsi Modi, <email>timsimodi90@gmail.com</email>; Min-Kyu Ji, <email>mkji@kei.re.kr</email>; Byong-Hun Jeon, <email>bhjeon@hanyang.ac.kr</email>
</corresp>
</author-notes>
<pub-date pub-type="epub">
<day>20</day>
<month>07</month>
<year>2023</year>
</pub-date>
<pub-date pub-type="collection">
<year>2023</year>
</pub-date>
<volume>11</volume>
<elocation-id>1160448</elocation-id>
<history>
<date date-type="received">
<day>07</day>
<month>02</month>
<year>2023</year>
</date>
<date date-type="accepted">
<day>24</day>
<month>05</month>
<year>2023</year>
</date>
</history>
<permissions>
<copyright-statement>Copyright &#xa9; 2023 Yadav, Modi, Alyami, Gacem, Choudhary, Yadav, Inwati, Wanale, Abbas, Ji and Jeon.</copyright-statement>
<copyright-year>2023</copyright-year>
<copyright-holder>Yadav, Modi, Alyami, Gacem, Choudhary, Yadav, Inwati, Wanale, Abbas, Ji and Jeon</copyright-holder>
<license xlink:href="http://creativecommons.org/licenses/by/4.0/">
<p>This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.</p>
</license>
</permissions>
<abstract>
<p>Coal fly ash (CFA) is a major global problem due to its production in huge volumes. Fly ash has numerous toxic heavy metals; thus, it is considered a hazardous material. However, it also has several value-added minerals like ferrous, alumina, and silica along with other minerals. Fly ash also has several natural micro- to nano-structured materials; for instance, spherical ferrous-rich particles, cenospheres, plerospheres, carbon nanomaterials, and unburned soot. These micron- to nano-sized particles are formed from the molten slag of coal, followed by condensation. Among these particles, plerospheres which are hollow spherical particles, and ferrospheres which are ferrous-rich particles, have potential applications in the environmental cleanup, research, catalytic industries, and glass and ceramics industries. Additionally, these particles could be further surface-functionalized or purified for other applications. Moreover, these particles are widely explored for their potential in the army and other defense systems like lightweight materials and sensing The recovery of such particles from waste fly ash will make the process and remediation technology economically and environmentally friendly. The current review focuses on the various structural and elemental properties of ferrospheres and plerospheres from fly ash. This review also focuses on the emerging applications of both naturally formed materials in CFA.</p>
</abstract>
<kwd-group>
<kwd>coal fly ash</kwd>
<kwd>plerospheres</kwd>
<kwd>cenospheres</kwd>
<kwd>ferrospheres</kwd>
<kwd>ceramics</kwd>
</kwd-group>
<custom-meta-wrap>
<custom-meta>
<meta-name>section-at-acceptance</meta-name>
<meta-value>Geochemistry</meta-value>
</custom-meta>
</custom-meta-wrap>
</article-meta>
</front>
<body>
<sec id="s1">
<title>1 Introduction</title>
<p>Coal fly ash (CFA) is a fine spherical powder produced in thermal power plants (TPPs) during the burning of pulverized coal when generating electricity (<xref ref-type="bibr" rid="B82">Yadav and Fulekar, 2020</xref>) (<xref ref-type="bibr" rid="B90">Yadav et al., 2023a</xref>). Annually, a large amount of CFA is produced globally and is mainly dumped in the vicinity of thermal power plants (TPPs) (<xref ref-type="bibr" rid="B88">Yadav et al., 2022a</xref>). However, due to the rapid advancement in technology, CFA has gained importance in the fields of metallurgy, ceramics (<xref ref-type="bibr" rid="B18">dos Santos et al., 2014</xref>), civil applications (<xref ref-type="bibr" rid="B45">Marinina et al., 2021</xref>), building and construction (<xref ref-type="bibr" rid="B47">Mohammed et al., 2021</xref>), river and embankments, and agriculture (<xref ref-type="bibr" rid="B83">Yadav and Pandita, 2019</xref>). The utilization of CFA worldwide is gradually increasing annually. As per a 2022 report, the total global annual production was about 1.143 billion tons, with an average utilization rate of 60%. Several European and Asian countries, including China, also reached 100% CFA utilization rates, while developing countries like India are struggling with a 50%&#x2013;60% utilization rate as per 2021&#x2013;2022 data (<xref ref-type="bibr" rid="B88">Yadav et al., 2022a</xref>).</p>
<p>The source of CFA is coal, which has various organic and inorganic compounds that produce structurally diverse spherical particles upon burning in TPP furnaces (<xref ref-type="bibr" rid="B86">Yadav et al., 2021a</xref>). The structural diversity in CFA particles is due to combustion at high temperatures (1,400&#x2013;1800&#xb0;C) (<xref ref-type="bibr" rid="B77">Wang et al., 2021</xref>), which melts the content of the coal. Condensation and complex processes give rise to structurally and chemically diverse spherical particles (&#x201c;<italic>spheres</italic>&#x201d;). Such spherical particles could be rich in alumina and silica and are known as &#x201c;<italic>aluminosilicate spheres</italic>&#x201d; or &#x201c;cenospheres&#x201d; (<xref ref-type="bibr" rid="B87">Yadav et al., 2021b</xref>). Another spherical particle in CFA is &#x201c;plerospheres,&#x201d; or spheres within spheres; i.e., larger spheres encapsulating several smaller spheres along with gases and mineral fragments (<xref ref-type="bibr" rid="B11">Chepaitis et al., 2011</xref>). Another type of sphere present in CFA is ferrospheres, which are ferrous-rich spherical particles. The size of all these spherical particles varies from 80&#xa0;nm to several microns (20&#xa0;&#xb5;) depending on the operating conditions of the TPPs (<xref ref-type="bibr" rid="B89">Yadav et al., 2022b</xref>). These spherical particles have applications in ceramics, construction, research, and environmental clean-up (<xref ref-type="bibr" rid="B58">Sharonova et al., 2015</xref>) and can be separated from CFA by several techniques, most commonly magnetic separation (<xref ref-type="bibr" rid="B59">Shoumkova, 2011</xref>; <xref ref-type="bibr" rid="B31">Gupta et al., 2022</xref>). For instance, magnetic fractions in CFA could be recovered by using an external magnet in wet or dry magnetic separation methods, while the rich non-ferrous fractions in plerospheres and cenospheres could be extracted using the sink-float technique, froth floatation technique, density-based separation, etc. Cenospheres are lighter in weight in comparison to ferrospheres and plerospheres (<xref ref-type="bibr" rid="B51">Noor-ul-Amin, 2014</xref>).</p>
<p>Generally, CFA has mainly 5%&#x2013;15% ferrous fractions, while plerosphere content varies from 0.1 to 3.8&#xa0;wt.%. In most cases, it is near 0.3&#x2013;1.5&#xa0;wt. %. In the last decade, ferrospheres have been used widely in ceramics, research, and other industries in comparison to plerospheres due to their easy recovery, wider applications in catalysis, etc. Contrary to ferrospheres, very limited information is available on plerospheres (<xref ref-type="bibr" rid="B6">Anshits et al., 2021</xref>). These structurally varied spherical particles have different structural and elemental properties and have started gaining importance in various applications (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>). Several investigators have reported the recovery of CFA components like cenospheres, plerospheres, ferrospheres, and unburned carbon particles. For instance, <xref ref-type="bibr" rid="B10">Blissett and Rowson (2012)</xref> suggested the utilization of CFA for agriculture, zeolite synthesis, cement manufacturing, glass ceramics, geopolymers, etc. (<xref ref-type="bibr" rid="B10">Blissett and Rowson, 2012</xref>). Yao and colleagues demonstrated the importance of CFA in the synthesis of geopolymers, silica aerogels, carbon nanotubes (CNTs), etc. (<xref ref-type="bibr" rid="B26">Gollakota et al., 2019</xref>). Furthermore, Yao and team emphasized the recovery of alumina from CFA in China (<xref ref-type="bibr" rid="B93">Yao et al., 2014</xref>; <xref ref-type="bibr" rid="B26">Gollakota et al., 2019</xref>).</p>
<p>The present study mainly emphasized ferrospheres and plerospheres, due to their morphological and elemental properties that make them two distinct, naturally formed spherical ceramic particles in CFA in TPPs. We also described the detailed mechanism involved in the formation of both these spherical particles in the furnace during coal burning in TPPs. Another objective was to summarize the recent advances in the recovery of plerospheres and ferrospheres from CFA. The final objective was to emphasize the emerging applications of plerospheres and ferrospheres in the fields of environmental cleanup and military. More recent work in these fields will draw the attention of scientific investigators toward plerosphere recovery and new emerging applications.</p>
</sec>
<sec id="s2">
<title>2 Structurally important and value-added particles in CFA</title>
<p>The structurally different structures of CFA i.e., plerospheres (PS), ferrospheres (FS), cenospheres (CS), and irregular carbonaceous particles (<xref ref-type="bibr" rid="B60">Snellings et al., 2021</xref>), play specific roles in different fields like environmental cleanup, research, ceramics (<xref ref-type="bibr" rid="B18">dos Santos et al., 2014</xref>), fillers, and lightweight materials (<xref ref-type="bibr" rid="B7">Balapour et al., 2022</xref>), etc. Among microspheres in CFA, cenospheres are the most predominant, followed by ferrospheres and plerospheres (<xref ref-type="bibr" rid="B43">Liu et al., 2018</xref>). All these three microspheres constitute a specific fraction of the CFA that forms as a result of the burning of pulverized coal in the furnaces of TPPs. These microspheres are formed during combustion in the furnace at the stage of transformation of coal mineral compounds, as shown in <xref ref-type="fig" rid="F1">Figure 1</xref>. The spherical shape is attributed to the cooling and solidification of CFA particles around the gases. These microspheres are mainly made up of aluminosilicate glasses, mullite, calcium silicates, sulfate, calcite ferrous oxides, and quartz (<xref ref-type="bibr" rid="B8">Baziak et al., 2021</xref>).</p>
<fig id="F1" position="float">
<label>FIGURE 1</label>
<caption>
<p>Generalized scheme of the transformation of coal mineral matter during combustion. Adapted and modified from <xref ref-type="bibr" rid="B39">Kutchko and Kim (2006)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g001.tif"/>
</fig>
<p>Silica dominates the solid phase of these microspheres, whose percentage is about 50%&#x2013;65%, followed by alumina at 19%&#x2013;65% and Fe<sub>2</sub>O<sub>3</sub> at 0.7%&#x2013;6.5%. In addition to this, it also has unburned carbons (UC) which are mainly composed of inorganic and organic carbon materials formed from the incomplete combustion of coal (<xref ref-type="bibr" rid="B19">Eisele and Kawatra, 2002</xref>; <xref ref-type="bibr" rid="B63">Song et al., 2021</xref>; <xref ref-type="bibr" rid="B44">Lv et al., 2022</xref>). These unburned particles contain char soot, polyaromatic hydrocarbons, and carbon nanotubes (CNTs) (<xref ref-type="bibr" rid="B2">Alam et al., 2021</xref>). Based on various reports around the globe, it was found that the UC content in CFA could vary from 2% to 12% but in some cases could also reach 20% (<xref ref-type="bibr" rid="B41">Liu et al., 2014</xref>). There are several reports where both single and multi-walled CNTs were found and isolated from CFA. In addition to this, a few investigators have also reported the extraction of fullerene, nano-onions, and graphene from CFA (<xref ref-type="bibr" rid="B15">Das et al., 2016</xref>; <xref ref-type="bibr" rid="B42">Liu et al., 2016</xref>; <xref ref-type="bibr" rid="B25">Gnanamoorthy et al., 2021</xref>). <xref ref-type="bibr" rid="B67">Tiwari et al. (2016)</xref> reported the presence of fullerene-like aggregates in CFA (<xref ref-type="bibr" rid="B66">Tiwari et al., 2015</xref>). The presence of CNTs 18&#x2013;24&#xa0;nm in diameter in the Gondwana region CFA was reported by a group of investigators from India. Several investigators have also claimed the presence of carbon nanoballs in various CFAs from different parts of the globe, for instance, carbon nanoballs with sizes of 5&#x2013;10&#xa0;nm were reported. In addition to these, numerous investigators have reported the presence and recovery of carbon onions, chars, and soots from the CFA samples using various techniques, with very high efficiency.</p>
<p>In addition to this, there are several reports where CS were used either directly or surface functionalized with other metallic particles like Ni, Zr, etc., for enhanced applications. CS have been used for the direct remediation of dyes and other effluents from wastewater at a much more economical cost (<xref ref-type="bibr" rid="B46">Markandeya et al., 2021</xref>). In addition to this, surface-functionalized CS are also used in defense applications, nanocomposites, and high mechanical strength material. CS were also used in construction materials, as a lightweight material, an insulating material, in ceramics, as fillers, as a composite material, and as an internal curing agent (<xref ref-type="bibr" rid="B9">Birla et al., 2017</xref>; <xref ref-type="bibr" rid="B87">Yadav et al., 2021b</xref>). <xref ref-type="bibr" rid="B73">Vereshchagina et al. (2018)</xref> synthesized analcime zeolite from CFA CS, and furthermore, they developed a Zr-analcime nanocomposite from CFA CS (<xref ref-type="bibr" rid="B73">Vereshchagina et al., 2018</xref>). <xref ref-type="bibr" rid="B37">Khoshnoud and Abu-Zahra (2015)</xref> observed the effect of CS CFA on the thermal, mechanical, and morphology of rigid polyvinyl chloride (PVC) composites (<xref ref-type="bibr" rid="B37">Khoshnoud and Abu-Zahra, 2015</xref>). <xref ref-type="fig" rid="F2">Figure 2</xref> shows an XRD pattern of CS from lignite CFA from Thailand TPPs, which clearly shows minerals like anhydrite, C&#x2014;calcite, CS&#x2014;calcium silicate, E&#x2014;ettringite, L&#x2014;lime, M&#x2014;magnetite, Me&#x2014;merwinite, Mu&#x2014;mullite, P&#x2014;potassium magnesium silicate, Po&#x2014;portlandite, Q&#x2014;quartz, and Sr&#x2014;srebrodolskite (<xref ref-type="bibr" rid="B96">Yoriya and Tepsri 2021)</xref>.</p>
<fig id="F2" position="float">
<label>FIGURE 2</label>
<caption>
<p>XRD of CS from lignite CFA of a Thailand TPP depicting their major minerals. Adapted from <xref ref-type="bibr" rid="B95">Yoriya and Tepsri (2020)</xref> and (<xref ref-type="bibr" rid="B96">Yoriya and Tepsri, 2021</xref>).</p>
</caption>
<graphic xlink:href="feart-11-1160448-g002.tif"/>
</fig>
</sec>
<sec id="s3">
<title>3 Basic properties of plerospheres and ferrospheres</title>
<sec id="s3-1">
<title>3.1 Plerospheres</title>
<p>Morphologically, PS are similar to CS and co-exist in CFA in mainly two types, i.e., thick-walled and thin-walled. PS could also be categorized into primary plerospheres and secondary plerospheres (based on internal particles and composition). PS contain several smaller spherical particles within them, making them heavier (<xref ref-type="bibr" rid="B38">Kolay and Singh, 2001</xref>; <xref ref-type="bibr" rid="B65">Sunjidmaa et al., 2019</xref>). As per the literature, the ruptured PS contain Fe, which is produced from the disoxidation of Fe<sup>2&#x2b;</sup> or Fe<sup>3&#x2b;</sup> in a strongly reducing environment before the rupture of PS (<xref ref-type="bibr" rid="B1">Adesina, 2020</xref>). Plerospheres are basically spheres within spheres, where smaller spherical particles become trapped inside larger spherical particles along with numerous minerals and gases. As a result, such plerospheres may be hollow and light in comparison to ferrospheres (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>). These PS are mainly thin-walled compared to FS. The sizes of PS vary from a few microns (&#x3bc;) to more than 20&#xa0;&#xb5;; however, their average size is mainly &#x3c;10&#xa0;&#xb5; (<xref ref-type="bibr" rid="B42">Liu et al., 2016</xref>). Plerospheres (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>) (or spheres within spheres) are essentially spherical-shaped, hollow, and mostly thin-walled CFA particles that have encapsulated a number of sub-microspheres or mineral particles (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>) of different sizes (mainly &#x3c;10&#xa0;&#xb5;) (<xref ref-type="bibr" rid="B42">Liu et al., 2016</xref>). Most of their features, such as chemical and elemental composition, morphology, etc., are similar to cenospheres. However, the two vary in their morphology as cenospheres are hollow in nature, while plerospheres are solid in nature (<xref ref-type="bibr" rid="B13">Choudhary et al., 2020</xref>). It has been found that in some CFA samples, CS were larger, while in others, PS were larger. However, normally, PS should be larger due to the presence of filled gases and minerals. The size of PS varies from 0.2 to 8&#xa0;&#xb5;, while the size of CS is 10&#x2013;1,000&#xa0;&#xb5; based on the TPPs, combustion temperature, and types of coal used (<xref ref-type="bibr" rid="B97">Yoriya et al., 2019</xref>; <xref ref-type="bibr" rid="B95">Yoriya and Tepsri, 2020</xref>). Ruptured PS release numerous smaller microspheres and mineral particles (<xref ref-type="bibr" rid="B64">Strza&#x142;kowska, 2021</xref>), as shown in <xref ref-type="fig" rid="F3">Figures 3A, B</xref>, <xref ref-type="fig" rid="F4">4A, B</xref>, <xref ref-type="fig" rid="F5">5A, B</xref> where scanning electron microscope (SEM) images show ruptured PS with numerous small spherical particles present within them. To date, very little information is available on PS in the scientific community.</p>
<fig id="F3" position="float">
<label>FIGURE 3</label>
<caption>
<p>
<bold>(</bold>A<bold>)</bold> SEM image of a thick-walled PS with a ruptured wall. <bold>(B)</bold> SEM image of a thin-walled PS with a ruptured wall. Adapted from <xref ref-type="bibr" rid="B27">Goodarzi and Sanei (2009)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g003.tif"/>
</fig>
<fig id="F4" position="float">
<label>FIGURE 4</label>
<caption>
<p>
<bold>(A)</bold> SEM micrograph of glassy PS in CFA. Adapted from <xref ref-type="bibr" rid="B35">Kaasik et al. (2005)</xref>. <bold>(B)</bold> Backscattered SEM image of PS. Adapted from <xref ref-type="bibr" rid="B11">Chepaitis et al. (2011)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g004.tif"/>
</fig>
<fig id="F5" position="float">
<label>FIGURE 5</label>
<caption>
<p>
<bold>(A)</bold> Typical SEM image of a plerosphere. <bold>(B)</bold> SEM image of a cracked PS filled with metallic Fe. Adapted from <xref ref-type="bibr" rid="B42">Liu et al. (2016)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g005.tif"/>
</fig>
<p>Structurally, PS is either thick- or thin-walled. Based on their origin and formation, they could be of two types, primary plerospheres and secondary plerospheres (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>). These structurally different types of PS form due to high-temperature (1,200&#x2013;1,700&#xb0;C) thermochemical transformation of the organic matter and mineral components in coal during combustion (<xref ref-type="bibr" rid="B42">Liu et al., 2016</xref>). PS form due to the differential melting of particles and the influence of gases generated by the: 1) dehydration of clay minerals and 2) decomposition of calcium carbonate and carbon present on the surface or inside the ash slag particles (<xref ref-type="bibr" rid="B21">Fisher et al., 1976</xref>). This type of method of PS formation is known as a primary process. PS with larger diameters (e.g., 100&#xa0;&#xb5;) are very common in CFA, enclosing sub-microspheres or mineral fragments (mostly &#x3c;10&#xa0;&#xb5;) and reportedly have high mechanical strength and chemical reactivity (<xref ref-type="bibr" rid="B60">Snellings et al., 2021</xref>).</p>
<p>PS have generally spherical-shaped particles with several smaller particles and mineral fragments (<xref ref-type="bibr" rid="B95">Yoriya and Tepsri, 2020</xref>). Both thick- and thin-walled PS release secondary plerospheres or mineral particles after wall rupture. As the name suggests, thick-walled plerospheres have thick walls due to a coating of carbon and other minerals. <xref ref-type="fig" rid="F5">Figure 5A</xref> shows a typical structure of PS under SEM, while <xref ref-type="fig" rid="F5">Figure 5B</xref> shows PS with ferrous content (<xref ref-type="bibr" rid="B42">Liu et al., 2016</xref>). Very little research has been conducted in this area, and limited information is available in the scientific domain. <xref ref-type="table" rid="T1">Table 1</xref> shows the chemical composition of fly ash CS, which indicates that CS are rich in Al and Si. From the chemical composition, one can easily conclude that both CS and PS contain mainly alumina and silica, along with other intermediate and trace elements such as Na, Mg, Ca, K, P, S, and Ti. The carbon composition could be higher or lower based on the type of coal used for the fuel in the TPPS, and other operating conditions of the furnaces of the TPPs. <xref ref-type="bibr" rid="B95">Yoriya and Tepsri (2020)</xref> reported that the chemical composition of CS depended on the size of the particles, even though their basic elements remained the same. The CS size and chemical composition were assessed in CS collected from lignite CFA from Thailand TPPs. <xref ref-type="table" rid="T2">Table 2</xref> shows the chemical compositions of PS extracted from CFA. <xref ref-type="table" rid="T3">Table 3</xref> shows the major differences and similarities between FS, CS, and PS extracted from CFA.</p>
<table-wrap id="T1" position="float">
<label>TABLE 1</label>
<caption>
<p>Chemical composition of CS classified according to their sizes. Adapted from <xref ref-type="bibr" rid="B96">Yoriya and Tepsri (2021)</xref>.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th rowspan="2" align="left">Item</th>
<th colspan="8" align="center">Composition (wt. %)</th>
</tr>
<tr>
<th align="left">SiO<sub>2</sub>
</th>
<th align="left">Al<sub>2</sub>O<sub>3</sub>
</th>
<th align="left">Fe<sub>2</sub>O<sub>3</sub>
</th>
<th align="left">CaO</th>
<th align="left">SO<sub>3</sub>
</th>
<th align="left">K<sub>2</sub>O</th>
<th align="left">TiO<sub>2</sub>
</th>
<th align="left">MnO</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">Cenospheres</td>
<td align="left"/>
<td align="left"/>
<td align="left"/>
<td align="left"/>
<td align="left"/>
<td align="left"/>
<td align="left"/>
<td align="left"/>
</tr>
<tr>
<td align="left">Bulk</td>
<td align="left">47.23 &#xb1; 0.56</td>
<td align="left">22.92 &#xb1; 0.14</td>
<td align="left">9.71 &#xb1; 0.48</td>
<td align="left">10.89 &#xb1; 0.27</td>
<td align="left">3.98 &#xb1; 0.12</td>
<td align="left">4.54 &#xb1; 0.15</td>
<td align="left">0.80 &#xb1; 0.02</td>
<td align="left">0.06 &#xb1; 0.00</td>
</tr>
<tr>
<td align="left">&#x3c;45&#xa0;&#xb5;</td>
<td align="left">41.31 &#xb1; 0.16</td>
<td align="left">19.61 &#xb1; 0.21</td>
<td align="left">12.62 &#xb1; 0.15</td>
<td align="left">15.50 &#xb1; 0.13</td>
<td align="left">6.47 &#xb1; 0.10</td>
<td align="left">3.76 &#xb1; 0.02</td>
<td align="left">0.63 &#xb1; 0.00</td>
<td align="left">0.11 &#xb1; 0.005</td>
</tr>
<tr>
<td align="left">45&#x2013;105&#xa0;&#xb5;</td>
<td align="left">53.39 &#xb1; 0.17</td>
<td align="left">25.02 &#xb1; 0.06</td>
<td align="left">7.84 &#xb1; 0.06</td>
<td align="left">6.36 &#xb1; 0.11</td>
<td align="left">1.88 &#xb1; 0.11</td>
<td align="left">4.72 &#xb1; 0.07</td>
<td align="left">0.78 &#xb1; 0.02</td>
<td align="left">0.06 &#xb1; 0.001</td>
</tr>
<tr>
<td align="left">106&#x2013;250&#xa0;&#xb5;</td>
<td align="left">51.92 &#xb1; 0.23</td>
<td align="left">23.72 &#xb1; 0.13</td>
<td align="left">9.70 &#xb1; 0.11</td>
<td align="left">8.28 &#xb1; 0.21</td>
<td align="left">1.99 &#xb1; 0.04</td>
<td align="left">3.57 &#xb1; 0.04</td>
<td align="left">0.77 &#xb1; 0.005</td>
<td align="left">0.06 &#xb1; 0.003</td>
</tr>
<tr>
<td align="left">&#x3e;250&#xa0;&#xb5;</td>
<td align="left">49.71 &#xb1; 0.93</td>
<td align="left">20.80 &#xb1; 0.59</td>
<td align="left">11.62 &#xb1; 0.99</td>
<td align="left">11.56 &#xb1; 0.29</td>
<td align="left">2.28 &#xb1; 0.31</td>
<td align="left">3.23 &#xb1; 0.15</td>
<td align="left">0.72 &#xb1; 0.02</td>
<td align="left">0.08 &#xb1; 0.001</td>
</tr>
</tbody>
</table>
</table-wrap>
<table-wrap id="T2" position="float">
<label>TABLE 2</label>
<caption>
<p>Chemical composition of CFA PS. Adapted from <xref ref-type="bibr" rid="B34">Haustein and Kury&#x142;owicz-Cudowska (2020)</xref> and <xref ref-type="bibr" rid="B11">Chepaitis et al. (2011)</xref>.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th align="center">Element</th>
<th align="center">CFA plerosphere wt. %</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="center">Si</td>
<td align="center">25.54</td>
</tr>
<tr>
<td align="center">Al</td>
<td align="center">10.93</td>
</tr>
<tr>
<td align="center">Mg</td>
<td align="center">0.99</td>
</tr>
<tr>
<td align="center">Na</td>
<td align="center">2.92</td>
</tr>
<tr>
<td align="center">Fe</td>
<td align="center">&#x2014;</td>
</tr>
<tr>
<td align="center">Ca</td>
<td align="center">1.17</td>
</tr>
<tr>
<td align="center">P</td>
<td align="center">&#x2014;</td>
</tr>
<tr>
<td align="center">S</td>
<td align="center">&#x2014;</td>
</tr>
<tr>
<td align="center">K</td>
<td align="center">4.03</td>
</tr>
<tr>
<td align="center">Ti</td>
<td align="center">&#x2014;</td>
</tr>
<tr>
<td align="center">C</td>
<td align="center">10.39</td>
</tr>
<tr>
<td align="center">O</td>
<td align="center">44.03</td>
</tr>
</tbody>
</table>
</table-wrap>
<table-wrap id="T3" position="float">
<label>TABLE 3</label>
<caption>
<p>Basic differences and similarities between FS, PS, and CS extracted from CFA.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th align="left">Property/feature</th>
<th align="left">Ferrospheres</th>
<th align="left">Plerospheres</th>
<th align="left">Cenospheres</th>
<th align="left">Reference</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">Shape and types</td>
<td align="left">Spherical, ellipsoidal, molten drop, etc.</td>
<td align="left">Spherical, and thick- and thin-walled</td>
<td align="left">Spherical</td>
<td align="left"/>
</tr>
<tr>
<td rowspan="2" align="left">Size (&#xb5;)</td>
<td rowspan="2" align="left">1&#x2013;500&#xa0;&#xb5;</td>
<td rowspan="2" align="left">0.2&#x2013;8&#xa0;&#xb5;</td>
<td align="left">10&#x2013;1000&#xa0;&#xb5;</td>
<td rowspan="2" align="left">
<xref ref-type="bibr" rid="B100">&#x17b;yrkowski et al. (2016)</xref>, <xref ref-type="bibr" rid="B96">Yoriya and Tepsri (2021)</xref>
</td>
</tr>
<tr>
<td align="left">20&#x2013;300&#xa0;&#x3bc;</td>
</tr>
<tr>
<td align="left">Definition/meaning</td>
<td align="left">&#x2014;</td>
<td align="left">Plerosphere from Greek: pl&#xeb;r&#xeb;s &#x2b; sphere &#x3d; filled sphere</td>
<td align="left">Cenosphere is derived from Greek: kenos &#x2b; sphere &#x3d; hollow sphere</td>
<td align="left"/>
</tr>
<tr>
<td align="left">Shell thickness (&#xb5;)</td>
<td align="left">&#x2014;</td>
<td align="left">&#x2014;</td>
<td align="left">2&#x2013;30&#xa0;&#xb5;</td>
<td align="left"/>
</tr>
<tr>
<td align="left">External texture</td>
<td align="left">Rough to smooth</td>
<td align="left">Smooth, some with an opening at one end</td>
<td align="left">Smooth</td>
<td align="left"/>
</tr>
<tr>
<td rowspan="2" align="left">Internal structure</td>
<td rowspan="2" align="left">Solid</td>
<td align="left">Solid</td>
<td align="left">Hollow</td>
<td rowspan="2" align="left">
<xref ref-type="bibr" rid="B99">Zierold and Odoh (2020)</xref>
</td>
</tr>
<tr>
<td align="left">Partially filled with porous magnetite-hematite aggregates</td>
<td align="left">Can have very thin (tenuisphere) or thick walls (crassisphere)</td>
</tr>
<tr>
<td align="left">Voids filled with</td>
<td align="left">&#x2014;</td>
<td align="left">Small irregular aluminosilicate grains, unburnt (fusained) coal particles, foam, and spongy and porous framework</td>
<td align="left">Irregular aluminosilicate grains (mainly mullite), iron oxides, unburnt (fusained) coal particles, and spongy (porous) form</td>
<td align="left"/>
</tr>
<tr>
<td align="left">Magnetic nature</td>
<td align="left">Highly magnetic</td>
<td align="left">Non-magnetic to weakly magnetic</td>
<td align="left">May be weakly magnetic</td>
<td align="left">
<xref ref-type="bibr" rid="B96">Yoriya and Tepsri (2021)</xref>
</td>
</tr>
<tr>
<td align="left">Percentage in CFA wt. %</td>
<td align="left">5%&#x2013;15%</td>
<td align="left">0.1&#x2013;3.8&#xa0;wt.%</td>
<td align="left">0.3%&#x2013;1.5%</td>
<td align="left">
<xref ref-type="bibr" rid="B22">Fomenko et al. (2011)</xref>
</td>
</tr>
<tr>
<td rowspan="3" align="left">Density</td>
<td rowspan="3" align="left">2.4 higher density than PS and CS</td>
<td align="left">Higher than CS</td>
<td align="left">Low density for lighter CS: 0.2&#x2013;2.6&#xa0;g/cc</td>
<td rowspan="3" align="left">
<xref ref-type="bibr" rid="B100">&#x17b;yrkowski et al. (2016)</xref>
</td>
</tr>
<tr>
<td align="left">0.75&#x2013;9.0&#xa0;wt.%</td>
<td align="left">For heavy metal and Al-bearing CS-02.9&#xa0;g/cc</td>
</tr>
<tr>
<td align="left">Due to its high density, more easily captured by an electrostatic precipitator</td>
<td align="left">Average density &#x3c;1&#xa0;g/cm<sup>3</sup>
</td>
</tr>
<tr>
<td align="left">Mechanical strength</td>
<td align="left">High</td>
<td align="left">High</td>
<td align="left">Very high</td>
<td align="left">
<xref ref-type="bibr" rid="B100">&#x17b;yrkowski et al. (2016)</xref>
</td>
</tr>
<tr>
<td rowspan="2" align="left">Porosity</td>
<td rowspan="2" align="left">Lowest</td>
<td align="left">Highly porous</td>
<td rowspan="2" align="left">Less porous</td>
<td rowspan="2" align="left"/>
</tr>
<tr>
<td align="left">Due to high porosity, most PS sink in water with CFA</td>
</tr>
<tr>
<td align="left">Specific gravity</td>
<td align="left">&#x2014;</td>
<td align="left">Higher</td>
<td align="left">Lowest</td>
<td align="left">
<xref ref-type="bibr" rid="B94">Yoon and Park (2017)</xref>
</td>
</tr>
<tr>
<td rowspan="2" align="left">Crystalline phases</td>
<td rowspan="2" align="left">Magnetite, hematite, quartz, calcite, etc.</td>
<td rowspan="2" align="left"/>
<td align="left">Quartz, mullite, calcite</td>
<td rowspan="2" align="left">
<xref ref-type="bibr" rid="B100">&#x17b;yrkowski et al. (2016)</xref>
</td>
</tr>
<tr>
<td align="left">Higher alumina and higher mechanical strength</td>
</tr>
<tr>
<td align="left">Chemical composition</td>
<td align="left">Fe, O, and traces of Al, Si, Ca, Na, C, etc.</td>
<td align="left">Dominated by Si, Al, C, O, and traces of Fe, Ca, Na, etc.</td>
<td align="left">Dominated by Si, Al, C, O, and traces of Fe, Ca, Na, etc.</td>
<td align="left">
<xref ref-type="bibr" rid="B21">Fisher et al. (1976)</xref>
</td>
</tr>
<tr>
<td align="left">Separation method</td>
<td align="left">Magnetic and density-based, and easy to separate</td>
<td align="left">Non-magnetic and density-based</td>
<td align="left">Non-magnetic and density-based</td>
<td align="left">
<xref ref-type="bibr" rid="B23">Fomenko et al. (2021)</xref>
</td>
</tr>
<tr>
<td rowspan="3" align="left">Applications</td>
<td rowspan="3" align="left">Ceramics, petroleum cracking, adsorbents, research, and medicine</td>
<td rowspan="3" align="left">Ceramics</td>
<td rowspan="3" align="left">Ceramics, defense, and nanocomposites</td>
<td align="left">
<xref ref-type="bibr" rid="B41">Liu et al. (2014)</xref>
</td>
</tr>
<tr>
<td align="left">
<xref ref-type="bibr" rid="B28">Guedes and Valentim (2021)</xref>
</td>
</tr>
<tr>
<td align="left">
<xref ref-type="bibr" rid="B36">Kanhar et al. (2020)</xref>
</td>
</tr>
</tbody>
</table>
</table-wrap>
<p>
<xref ref-type="fig" rid="F6">Figures 6A, B</xref> show the energy-dispersive spectroscopy (EDS) spectra and elemental composition of PS and CS, respectively. <xref ref-type="fig" rid="F6">Figures 6A, B</xref> show the presence of common elements in both structures. The EDS shows that both structures vary only in the percentage of elements. The major elements are Al, Si, O, and Fe. Other elements are present in trace amounts in both structures.</p>
<fig id="F6" position="float">
<label>FIGURE 6</label>
<caption>
<p>SEM micrographs and EDS spectra of CS <bold>(A)</bold> and PS <bold>(B).</bold> Adapted from <xref ref-type="bibr" rid="B20">Ferrarini et al. (2016)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g006.tif"/>
</fig>
</sec>
<sec id="s3-2">
<title>3.2 Ferrosphere properties and types</title>
<p>FS are present in all CFAs, i.e., they are produced from lignite, bituminous, sub-bituminous, and anthracite. They are known as magnetic microspheres or spinels. A typical FESEM image of FS is shown in <xref ref-type="fig" rid="F7">Figure 7</xref>, which reveals the presence of several spherules and angular deposits of iron oxides on their surfaces.</p>
<fig id="F7" position="float">
<label>FIGURE 7</label>
<caption>
<p>FESEM micrographs of CFA ferrospheres. Adapted from <xref ref-type="bibr" rid="B84">Yadav et al. (2020a)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g007.tif"/>
</fig>
<p>The major mineralogical composition of magnetic fractions of CFA are ferrospinels (79%&#x2013;90% wt.%). The FS of CFA have all three phases of iron oxides, i.e., magnetite along with Ca, Mg, and Mn, with hematite comprising approximately 5&#x2013;17&#xa0;wt. %, maghemite gamma-Fe<sub>2</sub>O<sub>3</sub>, and a paramagnetic phase of approximately 2&#x2013;8&#xa0;wt% (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>; <xref ref-type="bibr" rid="B62">Sokolar and Vodova, 2011</xref>). FS are ferrous-rich spherical particles that can be rough or smooth based on the deposition of the ferrous fraction on the surface of aluminosilicate spheres (<xref ref-type="bibr" rid="B86">Yadav et al., 2021a</xref>). These can be of various shapes and sizes, depending on their surface texture, the type of coal used, the temperature of the furnace, etc. CFA-extracted FS morphology can be either rough or smooth, in which the rough spheres show depositions of ferrous particles on their surface and are comparatively more magnetic than the smooth-surfaced ones (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>; <xref ref-type="bibr" rid="B62">Sokolar and Vodova, 2011</xref>). The two most dominant types of FS in CFA are rough- and smooth-surfaced FS. These iron-rich microspheres are formed during the combustion of coal, followed by the melting and condensation of the liquid mixes in the TPPs. Rough-surfaced FS have several ferrous-rich granular depositions on their surface, whereas the smooth-surfaced ferrospheres have a homogenous spread of molten ferrous on the surface, which is responsible for the weakly magnetic nature of the particles (<xref ref-type="bibr" rid="B23">Fomenko et al., 2021</xref>). Vast works of literature have shown that, based on the various operating conditions and global area, the size of FS varies from 90&#xa0;nm to 20&#xa0;&#xb5; (<xref ref-type="bibr" rid="B42">Liu et al., 2016</xref>). Fine CFA contains smaller-sized particles, while bottom CFA contains larger-sized CFA particles along with FS.</p>
<p>Several investigators have isolated ferrous fractions from CFA from various parts of the globe. For instance, <xref ref-type="bibr" rid="B80">Yadav and Fulekar (2014)</xref> reported the extraction of ferrous fractions from CFA collected from TPPS in Gandhinagar, Gujarat, India (<xref ref-type="bibr" rid="B80">Yadav and Fulekar, 2014</xref>). <xref ref-type="bibr" rid="B92">Yadav 2019</xref> reported the presence of smooth and rough-shaped ferrous fractions in the CFA of the same TPPs. In both reports, the investigators observed FS sizes varying from 100&#xa0;nm to several microns. The iron oxides on their surface were mainly present in mixed phases, i.e., magnetite, hematite, and maghemite, as revealed by x-ray diffraction (XRD). Moreover, <xref ref-type="bibr" rid="B88">Yadav et al. (2022a)</xref> extracted FS from CFA collected from TPPs in Kota, Rajasthan. The investigators extracted the FS from the CFA slurry using a strong magnet. Most of the FS were rough-surfaced, with angular and spherule deposits on their surface. The size of the extracted FS varied from 400 to 700&#xa0;nm (<xref ref-type="bibr" rid="B89">Yadav et al., 2022b</xref>).</p>
<p>
<xref ref-type="bibr" rid="B58">Sharonova et al. (2015)</xref> reported the extraction of approximately eight fractions of FS from high calcium-containing CFA collected from a Russian TPP. The size of the extracted FS varied from 0.4 to 0.02&#xa0;mm (<xref ref-type="bibr" rid="B58">Sharonova et al., 2015</xref>). <xref ref-type="bibr" rid="B71">Valentim et al. (2016)</xref> extracted FS from CFA collected from TPPs in Bokaro and Jharia. The investigators reported that the coal used to feed the TPPs mainly contained ferrous carbonates like siderite. Whereas in the CFA, the iron oxide content was about 2.7&#xa0;wt.% to 4.5&#xa0;wt.%. The investigators also confirmed the presence of magnetite and hematite phases of iron oxides in minor ratios in the CFA (<xref ref-type="bibr" rid="B71">Valentim et al., 2016</xref>). <xref ref-type="bibr" rid="B23">Fomenko et al. (2021)</xref> extracted ferrous fractions and categorized them according to size, i.e., particulate matter (PM2.5, PM2.5&#x2013;10, and PM10) (<xref ref-type="bibr" rid="B23">Fomenko et al., 2021</xref>). Sokol et al. (1998) extracted FS from the Russian Chelyabinsk basin and reported the presence of magnetic particles of variable geometrical shape; i.e., triangular, rectangular, spherule, and polygonal on the external surface of the FS. They also reported the presence of dense dendritic FS about 50&#x2013;120&#xa0;&#xb5; in size, which comprised about 85% wt. fraction of the total ferrospinels. Furthermore, investigators also reported the presence of magnetic particles on FS in a &#x201c;pine-tree&#x201d; pattern and ferrite FS with dimensions in the range of 100&#x2013;200&#xa0;&#xb5;, which was rare in occurrence and comparatively larger than other FS. Finally, the investigators found magnesioferrite in the CFA, which had high reflectivity and formed octahedra 10&#xa0;&#xb5; in size in the microsphere core, whose spaces were filled with calcium ferrite (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>).</p>
<p>Rough-surfaced ferrospheres have depositions of ferrous particles on their surfaces and are comparatively more magnetic than the smooth-surfaced ferrospheres (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>; <xref ref-type="bibr" rid="B68">Um and Jeon, 2021</xref>). Rough-surfaced ferrospheres have several ferrous-rich granular depositions on their surface, while smooth-surfaced ferrospheres have a homogenous spread of molten ferrous on their surfaces, which is responsible for their weakly magnetic nature (<xref ref-type="bibr" rid="B23">Fomenko et al., 2021</xref>). It is evident from the literature that the iron oxides in the ferrospheres of CFA are present in all three phases; i.e., magnetite, maghemite, and hematite on the surface of ferrospheres, mainly in the magnetite (Fe<sub>3</sub>O<sub>4</sub>) and hematite (&#x3b1;-Fe<sub>2</sub>O<sub>3</sub>) phases. Several investigators have confirmed the presence of hematite and magnetite (<xref ref-type="bibr" rid="B79">Xue and Lu, 2008</xref>; <xref ref-type="bibr" rid="B71">Valentim et al., 2016</xref>; <xref ref-type="bibr" rid="B5">Anshits et al., 2018</xref>; <xref ref-type="bibr" rid="B89">Yadav et al., 2022b</xref>) in CFA collected from different parts of the globe.</p>
<p>All these ferrous granules are deposited on the spheres where the ferrous particles are deposited in the form of dendrites. The ferrous particles/granules are deposited on the ferrospheres during the vaporization and condensation of CFA particles (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>). From the literature, it is also well-proven that the source of such ferrous particles is coal, which contains pyrite minerals. At high temperatures in the furnaces of TPPs, these pyrite minerals undergo oxidation and reduction and are transformed into iron oxides. From the literature, the ferrous content of CFA mainly varies from 5% to 15%. This range could vary marginally, based on the area of the globe. Numerous investigators have tried to isolate the ferrous fractions from the CFA, either by dry magnetic or wet slurry-based magnetic separation techniques. The dry magnetic separation technique involves the use of conveyor belts with magnetic fittings at one side to collect the magnetic fractions of the CFA. The slurry-based wet magnetic separation method involves the use of liquid for mixing the CFA. This is followed by a collection of magnetic fractions using a strong magnetic or applied magnetic field (<xref ref-type="bibr" rid="B79">Xue and Lu, 2008</xref>).</p>
<p>Regarding the elemental composition, CFA mainly comprises Si, Al, Ca, Fe, and O and traces of Na, K, P, Ti, etc. Ferrospheres are rich in Fe and mainly present with Al, Si, Ca, Ti, and O. The matrix is made up of Al and Si, while the surface contains ferrous. The composition of such ferrospheres may slightly vary due to the source of coal used in the TPPs, which may be a rich source of other minerals depending on the mines. EDS analysis in the literature revealed appreciable amounts of Si, S, Al, and Ca in ferrospheres, which may come from quartz, mullite (<xref ref-type="bibr" rid="B85">Yadav et al., 2020b</xref>), anhydrite, and amorphous materials in the CFA. Therefore, the major elemental compositions of ferrospheres are Fe and O along with Ca, Mg, Na, K, Ti, and C. The presence of Al, Si, C, Ti, Ca, Mg, etc., along with Fe in extracted FS has been reported by several investigators (<xref ref-type="bibr" rid="B79">Xue and Lu 2008</xref>; <xref ref-type="bibr" rid="B71">Valentim et al., 2016</xref>; Sokol et al., <xref ref-type="bibr" rid="B5">Anshits et al., 2018</xref>; <xref ref-type="bibr" rid="B89">Yadav et al., 2022b</xref>) in CFA collected from different parts of the world. <xref ref-type="bibr" rid="B88">Yadav et al. (2022a)</xref> reported the presence of approximately nine elements in their oxides in CFA collected from the Kota TPPs by EDS analysis, as shown in <xref ref-type="fig" rid="F8">Figure 8</xref>. Here, Fe was present in the highest percentage (43.02%) followed by elemental Si (6.4%) and Al (5.51%). O was present at about 38.14%. The CFA also contained traces of Na, Ti, Ca, P, Mg, and C.</p>
<fig id="F8" position="float">
<label>FIGURE 8</label>
<caption>
<p>EDS spot, EDS spectra, and elemental composition of ferrospheres. Adapted from <xref ref-type="bibr" rid="B89">Yadav et al. (2022b)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g008.tif"/>
</fig>
<p>Extracted FS have several elemental impurities in the form of Al, Si, Ca, C, etc. so are widely used in the petroleum industries as a catalyst, as well as cokes in the steel industry, etc. However, hardly any literature is available in which these CFA ferrospheres have been used in highly pure form in research or industries. Attempts have made to utilize these ferrous fractions from CFA as a source of raw material for the synthesis of iron particles. In one recent attempt, <xref ref-type="bibr" rid="B92">Yadav (2019)</xref> synthesized highly pure iron oxide nanoparticles from CFA by treating the extracted FS with strong mineral acids. Here, the extracted FS was treated with strong acids to obtain ferrous leachate, which in turn was used as a precursor material for the synthesis of IONPs by chemical coprecipitation (<xref ref-type="bibr" rid="B92">Yadav, 2019</xref>).</p>
</sec>
<sec id="s3-3">
<title>3.3 Types of ferrospheres</title>
<p>Structurally, FS extracted from CFA have different shapes and sizes. Several investigators have revealed the surface texture of ferrospheres by scanning electron microscopy (SEM) (<xref ref-type="bibr" rid="B62">Sokolar and Vodova, 2011</xref>). The FS in fly ashes can be divided into several types, namely, rough, smooth, polygon, dendritic, granular, and molten drop ferrospheres (<xref ref-type="bibr" rid="B98">Zhao et al., 2006</xref>).</p>
<p>Most FS have rough surfaces, with shapes close to an ideal sphere. <xref ref-type="bibr" rid="B61">Sokol et al. (2002)</xref> reported that most of the extracted FS from a Russian TPP were close to ideal spheres, with dendritic or skeletal morphology (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>). Rough-surfaced FS have depositions of numerous ferrous particles on their surface, which are crystalline in nature and have mixtures of magnetite, maghemite, and hematite. The size of these deposited ferrous particles varies from 50 to 200&#xa0;nm. These deposited ferrous particles provide magnetic properties. Such types of ferrospheres are called rough-surfaced FS. In comparison to smooth-surfaced FS, rough-surfaced FS have higher magnetic strength.</p>
<p>Granular ferrospheres have a rough, porous, and granular surface structure and are often complicated by the additional presence of small granular crystals. The granular crystals on the surface of the ferrospheres are predominantly a result of iron oxide crystallization when the temperature decreases in the furnace of TPPs. <xref ref-type="bibr" rid="B88">Yadav et al. (2022a)</xref> reported the extraction of rough-surfaced FS with angular and granular deposits on their surface in CFA collected from TPPs in Kota, the SEM images of which are shown in <xref ref-type="fig" rid="F9">Figure 9</xref>.</p>
<fig id="F9" position="float">
<label>FIGURE 9</label>
<caption>
<p>FESEM micrographs of ferrospheres. <bold>(A)</bold> Angular deposits. <bold>(B)</bold> Crystalline pattern. <bold>(C)</bold> Spherule deposits. <bold>(D)</bold> Minute spherule deposits. Adapted from <xref ref-type="bibr" rid="B89">Yadav et al. (2022b)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g009.tif"/>
</fig>
<p>Another type of ferrosphere is the smooth-surfaced type, with uniform depositions/distribution of ferrous on their surfaces. Due to this uniform distribution of ferrous, they have lower magnetic strength or are weakly magnetized. The diameter of smooth ferrospheres often varies from 40 to 60&#xa0;&#xb5;. EDS and other instrumental analyses have shown low Fe content in smooth-surfaced ferrospheres. <xref ref-type="fig" rid="F10">Figure 10A</xref> shows FESEM images of mixed, i.e., both smooth and rough-surfaced, FS. <xref ref-type="fig" rid="F10">Figure 10B</xref> shows smooth-surfaced FS from <xref ref-type="bibr" rid="B89">Yadav et al. (2022b)</xref>.</p>
<fig id="F10" position="float">
<label>FIGURE 10</label>
<caption>
<p>FESEM micrographs of fly ash rough and smooth ferrospheres <bold>(A,B).</bold> Adapted from <xref ref-type="bibr" rid="B89">Yadav et al. (2022b)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g010.tif"/>
</fig>
<p>Polygon ferrospheres often exhibit blocky surface crystallites of iron oxides. Molten drop FS, with a great deal of goblet and granular particles on their surfaces, are formed during the crystallization of iron oxides from the liquid melt of the inner particles (<xref ref-type="bibr" rid="B23">Fomenko et al., 2021</xref>). A team led by Vu reported SEM images of magnetic and non-magnetic fractions of ferrospheres from CFA collected from two different TPPs in Vietnam, as shown in <xref ref-type="fig" rid="F11">Figure 11</xref> (<xref ref-type="bibr" rid="B74">Vu et al., 2019</xref>).</p>
<fig id="F11" position="float">
<label>FIGURE 11</label>
<caption>
<p>SEM micrographs of nonmagnetic 1 and magnetic particles (2&#x2013;8) <bold>(A,B)</bold> collected from Uong Bi and Pha Lai fly ash. Adapted from <xref ref-type="bibr" rid="B74">Vu et al. (2019)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g011.tif"/>
</fig>
</sec>
</sec>
<sec id="s4">
<title>4 Mechanisms of ferrosphere and plerosphere formation in CFA</title>
<p>In addition to ferrospheres, CFA ferrous fractions also have plerospheres, which are hollow encapsulated spherical CFA particles filled with minerals and gases. CFA also contains cenospheres, which are spherical-shaped Al- and Si-rich particles with sizes varying from 5 to 50&#xa0;&#xb5; (<xref ref-type="bibr" rid="B84">Yadav et al., 2020a</xref>).</p>
<sec id="s4-1">
<title>4.1 Mechanism of plerosphere formation in CFA</title>
<p>Generally, CFA has both cenospheres and plerospheres; in such CFA, only a small portion of the cenospheres may be transformed into secondary plerospheres. CS can be transformed into PS by one of the following mechanisms, as shown in <xref ref-type="fig" rid="F12">Figure 12</xref>. During the combustion of coal, various minerals in the coal decompose, including carbon, carbonates, or carbides. As a result, the CFA particles will expand to stable CS. Due to this, the internal pressure of the CS will increase, followed by the formation of an aperture in the over-expanded CS, which releases the gas once its wall is punctured. Investigators have reported that puncture of the wall is possible due to collisions, which generate apertures of various sizes (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>). During this step, CS that are ruptured are impregnated with microspheres that are confined within the cenosphere wall to form a secondary plerosphere. Which forces are behind the entry of CS into the MS is not clear. The finer particles may be trapped by the PS, which may be retained in the control devices of the TPPs; hence, such particles will be released into the air atmosphere at low concentrations. If PS and hollow CS have almost the same dimensions, the PS are heavier due to the additional weight of captured microspheres (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>). <xref ref-type="fig" rid="F12">Figure 12</xref> shows the probable mechanism for the formation of plerospheres in CFA, as adapted from <xref ref-type="bibr" rid="B11">Chepaitis et al. (2011)</xref> and <xref ref-type="bibr" rid="B27">Goodarzi and Sanei (2009)</xref>, respectively. According to <xref ref-type="bibr" rid="B11">Chepaitis et al. (2011)</xref>, PS formation successively takes from a cenosphere; for instance, a CS particle in which the surface is weakened due to various internal and external factors. The ruptured spherical particle from the previous step is filled with numerous smaller spherical particles, mineral fragments, and gases from the surroundings. This mechanism is common for the formation of both thick and thin-walled PS from CFA. Goodarzi and Sanei also reported a detailed mechanism for the formation of plerospheres in CFA (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>).</p>
<fig id="F12" position="float">
<label>FIGURE 12</label>
<caption>
<p>Mechanism of plerosphere formation. <bold>(A)</bold> Feed coal. <bold>(B&#x2013;F)</bold> Electro precipitator (ESP) fly ash. SEM carbon-coated surface. Adapted from <xref ref-type="bibr" rid="B27">Goodarzi and Sanei (2009)</xref>.</p>
</caption>
<graphic xlink:href="feart-11-1160448-g012.tif"/>
</fig>
</sec>
</sec>
<sec id="s5">
<title>5 Formation of ferrospheres in CFA</title>
<p>Coal contains pyrite and other sources of iron, which are used for the production of electricity in TPPs (<xref ref-type="bibr" rid="B75">Waanders et al., 2003</xref>). The high temperature of the furnace melts these organic and inorganic ferrous contents and forms a molten slag. This molten slag undergoes condensation and acquires a spherical shape while descending in the furnace (<xref ref-type="bibr" rid="B32">Guzm&#xe1;n-Carrillo et al., 2018</xref>). The preformed matrix has mainly Al and Si along with carbon, while iron is deposited on the surface of the preformed spheres. The deposition of granular iron on the surface of preformed spheres leads to rough-surfaced ferrospheres. This type of magnetic sphere is strongly magnetic. The other type of ferrosphere is the smooth type, in which the ferrous and nonferrous melt, attaining a spherical shape. In this type of sphere, the ferrous particles are evenly distributed in the spheres; however, the spheres are weakly magnetized (<xref ref-type="bibr" rid="B65">Sunjidmaa et al., 2019</xref>).</p>
<p>
<xref ref-type="bibr" rid="B61">Sokol et al. (2002)</xref> described the mechanism of formation of FS in TPPs in Russian Chelyabinsk. The authors suggested that during the combustion of fuel, high ferrous melts arise from the melting of the ferrous carbonates of coal. The confirmation of this supposition was strengthened by the increased content of P and Mn in the siderite and ankerite and FS. The chemical composition of each melt or final FS is determined by the chemical composition of Fe carbonate having admixtures of pelitic material. If the heating temperature is &#x3e;1,000&#xb0;C, a considerable amount of Na and small amounts of K and Si are volatilized. Therefore, drops of ferrous melts have reduced amounts of Na, Si, and K and are enriched for Fe compared to the initial material (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>).</p>
<p>These iron melts have iron in the form of Fe<sup>0</sup>, Fe<sup>2&#x2b;</sup>, and ferrite complexes (Fe<sup>3&#x2b;</sup> O<sub>2</sub>)<sup>-</sup> and (Fe<sup>3&#x2b;</sup>O<sub>5</sub>)<sup>4-</sup>. The Fe melts exist only under extremely reducing conditions as a proper phase in silicate liquid. When the furnace temperature is &#x3e; 1,200&#xb0;C, there will be minimal fugacity of O<sub>2</sub>. The major fraction of FS is ferrispinels and silicate glass instead of native Fe or ferrosilicon. Hence, the formation of such FS proceeds under conditions of higher partial oxygen pressure. Furthermore, the minerals of Fe are mainly governed by the temperature of the furnace in TPPs. Moreover, temperature also plays a role in the amorphous and crystalline nature of the minerals associated with FS. Silicate liquids with ferrous iron appear during the melting of CFA material at 1,000&#x2013;1,100&#xb0;C. During CFA formation, ferrite liquid with surplus amounts of Fe<sup>3&#x2b;</sup> in the form of (FeO<sub>2</sub>)<sup>-</sup> and (Fe<sub>2</sub>O<sub>5</sub>)<sup>4-</sup> anions mainly appear at temperatures &#x3e;1,500&#xb0;C (<xref ref-type="bibr" rid="B64">Strza&#x142;kowska, 2021</xref>).</p>
<p>Furthermore, the nature and phases of iron oxides in FS depend on the cooling history of ferrous melts. The stability of minerals depends on the temperature in FS. Moreover, the Fe oxidation state in the FS depends on oxygen concentration and temperature. In addition to these two, it also depends on several other factors inside the furnace. The crystallization of ferrispinels is also governed by the temperature, i.e., lower temperatures favor crystallization. The chemical composition of ferrispinels is determined by the bulk chemistry of the melt (Ca, Mg, Mn, and Si concentrations), temperature, quenching rate, and O<sub>2</sub> fugacity. The crystallization of iron oxides leads to the enrichment of Ca, Mg, Si, and Al in the melt (<xref ref-type="bibr" rid="B61">Sokol et al., 2002</xref>). <xref ref-type="bibr" rid="B50">Ngu et al. (2007)</xref> reported the numerical ratio between PS and CS in CFA collected from an Australian TPP. The investigators demonstrated that this ratio increased with increased typical diameter (D<sub>0</sub>). <xref ref-type="bibr" rid="B12">Choo et al. (2020)</xref> also reported the effect of temperature on the shape, size, phase transformations, and thermal expansion of cenospheres in CFA collected from a Malaysian TPP.</p>
</sec>
<sec id="s6">
<title>6 Extraction of ferrous particles and plerospheres from CFA</title>
<sec id="s6-1">
<title>6.1 Recovery of plerospheres</title>
<p>Although CFA contains structurally varied types of particles, the two most closely related are CS and PS. Since PS have numerous smaller microspheres inside them, they are considerably heavier than the hollow CS (<xref ref-type="bibr" rid="B14">Danish and Mosaberpanah, 2020</xref>). Thus, CS and PS could be easily separated by means of density gradation. One such economical, and the most common, method is centrifugation, in which the heavier particles (PS) settle earlier and the hollow (lighter) CS settle later. Therefore, CS can be collected by decanting the supernatant, while PS can be collected from the residue. The residual particles can be washed several times with water to obtain pure PS free from CS and FS. PS can also be collected using a cyclone, which applies centrifugal force.</p>
<p>Since PS of same dimension as that of CS will be heavier due to the captured particles, it can be separated from the CFA slurry mixture by the centrifugal force generated in the cyclone. This is easier and more efficient if FS are first recovered using a magnet and then from nonferrous residue using cyclone. Hence, the heavier PS will be removed from the stream, while the lighter CS will remain in the stream of the cyclone. This is one way of enriching PS from a CFA sample, as reported by <xref ref-type="bibr" rid="B27">Goodarzi and Sanei (2009)</xref>, who also reported the role of PS in reducing finer particles from TPPs.</p>
<p>
<xref ref-type="bibr" rid="B57">Sharonova et al. (2003)</xref> reported the potential presence of PS in the magnetic microspheres in CFA. They further stated that it is very difficult to quantify the fractions of PS in close-cut fractions as the outer wall can be continuous and, in this case, would screen the inner part of a globule. They found about 16% PS in the magnetic microspheres of CFA of Ekibastuz coal, with an Fe<sub>2</sub>O<sub>3</sub> content of approximately 48%.</p>
</sec>
<sec id="s6-2">
<title>6.2 Extraction of ferrospheres from CFA</title>
<p>CFA ferrous fractions can be extracted by both wet slurry and dry magnetic separation methods. The dry separation method involves the formation of a slurry with water and extraction with the help of a strong magnet (<xref ref-type="bibr" rid="B78">Wrona et al., 2020</xref>). The dry separation involves the water-free based extraction of the ferrous fraction by conveyer belts. At one end of the conveyer belts, a strong magnet is attached to separate the magnetic fractions get from the nonmagnetic fractions (<xref ref-type="bibr" rid="B70">Valeev et al., 2019</xref>). Several investigators have reported the recovery of ferrous fraction from CFA by both dry and wet slurry separation processes (<xref ref-type="bibr" rid="B53">Petrus et al., 2011</xref>). The extraction of ferrous particles is possible by magnetic separation methods, which will also segregate ferrous from non-ferrous components.</p>
<p>The extracted ferrous particles can be further purified by treatment with various acids to synthesize pure iron oxides. <xref ref-type="bibr" rid="B23">Fomenko et al. (2021)</xref> reported the presence of magnetic fractions in CFA from Ekibastuz, with particulate matter sizes of about 2.5, 2.5&#x2013;10, and 10&#xa0;&#x3bc; (<xref ref-type="bibr" rid="B23">Fomenko et al., 2021</xref>). <xref ref-type="bibr" rid="B33">Han et al. (2009)</xref> reported the recovery of magnetic fractions of CFA by wet slurry magnetic separation methods in coal bottom CFA. <xref ref-type="bibr" rid="B81">Yadav and Fulekar (2019)</xref> reported the extraction of ferrous fractions from CFA produced by TFFs in Gandhinagar by the wet slurry separation method. These were further transformed into four different phases of iron oxides by chemical and physical approaches. The size of the ferrospheres extracted from CFA was 0.2&#x2013;7&#xa0;&#x3bc;, as revealed by FESEM and TEM (<xref ref-type="bibr" rid="B90">Yadav et al., 2023a</xref>; <xref ref-type="bibr" rid="B91">Yadav et al., 2023b</xref>). <xref ref-type="bibr" rid="B57">Sharonova et al. (2003)</xref> and Fomenko et al. (2002) also initially characterized FS in CFA and later extracted FS by applying dry and wet magnetic separation methods with varying efficiency from CFA of TPPs.</p>
</sec>
</sec>
<sec id="s7">
<title>7 Applications of ferrospheres and plerospheres</title>
<sec id="s7-1">
<title>7.1 Applications of ferrospheres</title>
<p>Ferrospheres extracted from CFA are chemically diverse due to the presence of Fe, Si, Al, C, K, Ca, Mg, etc., and are suitable for various applications, especially as catalysts in the petroleum industry, mainly in the high-temperature process of based oxidative dimerization of methane (<xref ref-type="bibr" rid="B4">Alterary and Marei, 2021</xref>; <xref ref-type="bibr" rid="B48">Naeem et al., 2022</xref>). FS are used frequently used in metallurgy for the extraction of pure iron particles. In metallurgy, FS are also used in steel industries for coke-smelting, and ore and coal dressing. Some examples in the literature have demonstrated the use of FS recovered from CFA as fillers for composite materials, which have gained significant attention (<xref ref-type="bibr" rid="B98">Zhao et al., 2006</xref>). FS are used as an alternative source of ferrous materials due to their high ferrous content (<xref ref-type="bibr" rid="B17">Dindi et al., 2019</xref>). FS are used as a raw material for iron-based industries. FS have also been widely used for the preparation of nanocomposites for various applications, as reported by <xref ref-type="bibr" rid="B86">Yadav et al. (2021a)</xref>. They are also used in concrete and ceramics applications like dense concrete production and nanoceramics (<xref ref-type="bibr" rid="B49">Nakonieczny et al., 2020</xref>).</p>
<p>Several investigators have used CFA ferrospheres as an adsorbent for the removal of dyes and other inorganic pollutants from wastewater. Fomenko (1998) demonstrated the application of FS extracted from TPPs as a catalyst for the high-temperature oxidative conversion of CH<sub>4</sub> (<xref ref-type="bibr" rid="B6">Anshits et al., 2021</xref>).</p>
<p>Moreover, recently they have been used in metallurgical processes; for instance, for the recovery and synthesis of iron oxide particles. <xref ref-type="bibr" rid="B92">Yadav (2019)</xref> reported the synthesis of four different iron oxide particles (IOPs); i.e., magnetite, maghemite, hematite, and ferrous carbonate by using CFA ferrospheres. Here, the ferrospheres were used as a raw material or source of iron, which was treated with concentrated mineral acids along with sonication at optimized temperatures. The ferrous leachate was used as a precursor material for the synthesis of IOPs by chemical co-precipitation using NaOH as a precipitating agent. Initially, ferrous carbonate was synthesized, which was later transformed into other phases of IOPs by chemical and calcination at 500&#x2013;700&#xb0;C (<xref ref-type="bibr" rid="B82">Yadav and Fulekar, 2020</xref>).</p>
<p>More recently, <xref ref-type="bibr" rid="B88">Yadav et al. (2022a)</xref> extracted ferrospheres from CFA collected from an Indian TPP. The collected FS were then treated with strong mineral acids (sulfuric acid and HCl) under sonication for 90&#xa0;min along with heating at 60&#xb0;C. Finally, the investigators developed surface-modified FS as a result of etching by acids. These surface-modified FS were used to remove Azure A dye from aqueous solutions. Approximately 25.03% of the dye was removed within 30 min (<xref ref-type="bibr" rid="B84">Yadav et al., 2022a</xref>).</p>
</sec>
<sec id="s7-2">
<title>7.2 Applications of plerospheres</title>
<sec id="s7-2-1">
<title>7.2.1 Reduction of pollution in the atmosphere</title>
<p>Plerospheres are used in civil engineering applications and road construction, in ceramics and glass industries, and as a cementing material. The literature has shown that PS could be used for the remediation of pollutants from wastewater. Another underestimated application of PS is that they trap ultrafine particles from TPPs, making them part of the bottom ash and preventing their release into the atmosphere to cause air pollution (<xref ref-type="bibr" rid="B76">Wang et al., 2004</xref>). Plerospheres play an important role in reducing the production of fine CFA particles from coal-based power plants. Fine particulate matter (&#x3c;2.5&#xa0;&#xb5;) emitted from coal-based power plants are hazardous to environmental and human health. These fine particles may cause cardiovascular and respiratory disorders (<xref ref-type="bibr" rid="B56">Schraufnagel, 2020</xref>)<bold>.</bold> Air filters fail to capture these particles; thus, they disperse into the environment and remain suspended for a longer duration, depending on their density in the air. Such particles can travel longer distances and, thus, have a larger spatial impact. Therefore, it is of utmost priority to reduce the emission of such particles during combustion. Goodarzi and Sanei suggested that the formation of large plerosphere particles is one possible solution to capture smaller CFA particles. During combustion, plerospheres encapsulate finer particles and are later captured by particle control devices such as ESP or fabric filters (<xref ref-type="bibr" rid="B27">Goodarzi and Sanei, 2009</xref>; <xref ref-type="bibr" rid="B56">Schraufnagel, 2020</xref>).</p>
</sec>
<sec id="s7-2-2">
<title>7.2.2 Plerospheres in aerospace applications</title>
<p>Due to the unique properties of PS, they are commonly used to prepare composites used in aerospace applications due to their light weight and high mechanical strength. Nowadays, ultrafine PS are used to fill the phenolic matrix to produce an AO-resistant fiber/phenolic resin composite. Such PS do not react with atomic oxygen. Investigations have shown that the use of PS as fillers provides considerable protection to the fiber/phenolic resin against AO erosion (<xref ref-type="bibr" rid="B76">Wang et al., 2004</xref>; <xref ref-type="bibr" rid="B54">Qian and Xuan, 2018</xref>).</p>
</sec>
<sec id="s7-2-3">
<title>7.2.3 Plerospheres for the removal of air pollutants</title>
<p>CFA associated with different chemical constituents is used to efficiently resolve environmental problems such as air pollution. CFA contents could be used as an economical sorbent for flue gas purification and air cleaning. The primary components of CFA, such as silica, alumina, and oxides of Fe, have been employed for the removal of trace elements and environmental SO<sub>x</sub> or NO<sub>x</sub> gases. Sulfur oxides and nitrogen oxides cause acid rain and have become a serious problem for the environment. Thus, many researchers are motivated to use CFA mixed with other minerals such as CaO or Ca (OH)<sub>2</sub>. <xref ref-type="bibr" rid="B3">Allen and Hayhurst (1996)</xref> used CaO to minimize SO<sub>2</sub> production, producing CaSO<sub>4</sub>, which is comparably less cost-effective than the wet and semi-dry processes for desulfurization. Additionally, CFA has been explored as a cheap sorbent material for flue gas desulfurization either in pure or mixed form with desired minerals. Ca(OH)<sub>2</sub> mixed with CFA has been studied for increased efficiency of SO<sub>2</sub> adsorption, while CaO has been applied to treat SO<sub>2</sub> in water (at room temperature) as a low-cost desulfurization method by <xref ref-type="bibr" rid="B40">Li et al. (2017)</xref>. Similarly, activated carbon has been widely used to adsorb heavy metal elements from wastewater; however, its limited availability is a major issue for its extensive use. Therefore, CFA has been converted as an effective adsorbent and employed as an economically desired material for the remediation of toxic substances from industries, laboratories, and wastewater. <xref ref-type="bibr" rid="B29">Gupta and Sharma (2003)</xref> used bagasse CFA (sugar industries waste) to clean Zn ions from water by evaluating the kinetic rate of adsorption. The active surface sites of the ferrosphere permit stronger chemisorption due to the larger area, which explains the adsorption effects. However, the porous nature of the outer surface also contributes to adsorbing organic and inorganic molecules or elements during water or air cleaning. Particle diffusion and accumulation on the porous structure have gained considerable attention in CFA extraction and its importance in purification chemistry. External and internal transport occur by involving both open-surface sites and porous structures. The kinetics of adsorption are often rapid; thus, many theoretical approaches have been employed to investigate the rate-determining steps.</p>
<p>In this regard, a modified procedure was adopted by <xref ref-type="bibr" rid="B16">Decker and Klabunde (1996)</xref>and Yang et al., in which around 4% of Fe<sub>2</sub>O<sub>3</sub> was mixed with CaO to adsorb SO<sub>2</sub> (<xref ref-type="bibr" rid="B24">Georgiadis et al., 2020</xref>). They found almost double reactivity for the adsorption due to the use of combined CaO/Fe<sub>2</sub>O<sub>3</sub>, and reported it as a destructive absorbent for sulfur dioxides. The FS and other constituents were identified as suitable destructive agents for toxins, including chlorinated hydrocarbons such as CHCl<sub>3</sub>, CCl<sub>4</sub>, C<sub>2</sub>Cl<sub>4</sub>, C<sub>2</sub>HCl<sub>3</sub>, and acid gases (SO<sub>2</sub>, CO<sub>2</sub>, HCl, and SO<sub>3</sub>). Spherical and narrow particles show specific reactivities toward toxins, resulting in a cost-effective technique for air and water treatments using CFA and its derivatives. Organic dyes are also degraded by waste material-bottom ash. The concentration of adsorbents and treatment time play crucial roles in the adsorption kinetics. The same evidence was addressed by <xref ref-type="bibr" rid="B30">Gupta et al. (2008)</xref>
<bold>.</bold> The heterocyclic and aromatic compounds removed by utilizing such CFA derivatives and a wider research potential were highlighted in this sector. To investigate the geometric and physicochemical features of CFA/particles, Peloso et al. removed toluene vapor using CFA particles (<xref ref-type="bibr" rid="B52">Peloso et al., 1983</xref>). A satisfactory performance for toluene adsorption was obtained due to the chemical activation, total porosity, and specific surface area of the sorbent. Furthermore, the adsorption kinetics of volatile aromatic hydrocarbons and x-xylene were investigated by <xref ref-type="bibr" rid="B55">Rothenberg et al. (1991)</xref>, who showed that the reactivity on pore structure was impactful for adsorbing these organic substances in gaseous form. The adsorption rate is mainly regulated by the diffusion process, while the partitioning of gaseous aromatic compounds depends upon the particle sizes, vapor pressure, temperatures, etc. Therefore, by utilizing such CFAs and their derived value-added minerals, various environmental issues could be resolved to make human lives healthier and easier by minimizing carcinogenic and mutagenic effects (caused by heterocyclic/aromatic toxic contents) by controlling air and water quality (<xref ref-type="bibr" rid="B69">Umejuru et al., 2021</xref>).</p>
</sec>
<sec id="s7-2-4">
<title>7.2.4 Applications of ferrospheres and plerospheres in defense systems</title>
<p>Several reports have described the use of the whole CFA or its components separately for defense and military purposes. CFA-based civil products like bricks and blocks are light in weight and can be directly used for the rapid construction of army base camps. Moreover, the light weight allows easy transportation (<xref ref-type="bibr" rid="B72">Varshney et al., 2022</xref>). Additionally, CFA-based bricks require less water during building or construction; thus, they are beneficial for army personnel for utilization in hilly or desert areas with limited water present. Due to the presence of ferrous particles, cenospheres, and plerospheres, this could be used as a material with high mechanical strength. It is used as a filler in several army-utilizable products. Additionally, the separate components, such as FS, have been used for the development of magnetic-based materials due to their magnetic properties. The most widely used particles are CS, which are very lightweight, with high mechanical strength and excellent electromagnetic properties. Both PS and CS are commonly used in defense radar systems due to their electromagnetic (EM) properties and are also being used as a substitute for CNTs in the development of lightweight materials in aircrafts. Various nanocomposites developed using CFA products have also been used for military purposes (<xref ref-type="bibr" rid="B81">Yadav and Fulekar, 2019</xref>; <xref ref-type="bibr" rid="B83">Yadav and Pandita, 2019</xref>; <xref ref-type="bibr" rid="B85">Yadav et al., 2020b</xref>).</p>
<p>CFA or cenospheres, plerospheres, and ferrospheres could also be used for the detection of toxic or radioactive substances by surface functionalizing of these particles to act as sensing materials. CFA-based products could be coated with specific chemicals for the detection of any chemical gases released by an enemy army. Moreover, cenospheres, ferrospheres, and plerospheres could be used by the army as sensing or detection agents in tunnels where chemical weapons, hazardous gases, or any liquid chemicals might have been placed by an enemy army (<xref ref-type="bibr" rid="B13">Choudhary et al., 2020</xref>; <xref ref-type="bibr" rid="B87">Yadav et al., 2021b</xref>).</p>
</sec>
</sec>
</sec>
<sec sec-type="conclusion" id="s8">
<title>8 Conclusion</title>
<p>Due to the variation in temperature of the furnace in thermal power plants, different zones are created. Consequently, morphologically different CFA structures are formed; i.e., ferrospheres, cenospheres, and plerospheres, which are mainly nearly spherical in shape. These spherical structures vary in their chemical composition and inner or outer structures. Although coal is a mixture of organic and inorganic compounds, it is dominated by organic compounds which, upon decomposition, produce these spherical structures. Among these spherical structures, ferrous-rich ferrospheres exhibit magnetic properties due to the depositions of iron oxides on their surfaces. These deposited iron oxides are mainly crystalline in nature, belonging to magnetite, maghemite, and hematite phases. Among these spheres, ferrospheres show maximum diversity, including rough, smooth, polygon, dendritic, granular, or molten drop, and range in size from a few nanometers to several microns. The fly ash extracted from unmodified ferrospheres has applications in metallurgy, ore dressing, and catalysis. Plerospheres are double-layered solid spherical particles, in which the outer and larger spheres trap numerous microspheres or mineral fragments. Based on the plerosphere wall thickness, it is categorized as thin- or thick-walled. The thickness of plerospheres is due to the coating of minerals or carbon at higher temperatures in the furnace. Plerospheres are used in engineering, military, ceramics, and wastewater treatment applications due to their unique and remarkable properties.</p>
</sec>
</body>
<back>
<sec id="s9">
<title>Author contributions</title>
<p>VY, NC, GI, SW, TM, and AG: original draft, manuscript writing and review, data curation, formal analysis, and investigation. MA, KY, M-KJ, B-HJ, and AA: conceptualization, validation, manuscript writing and review, software, visualization, project administration, and funding acquisition. VY, B-HJ, and TM, supervision, methodology, and resources. All authors contributed to the article and approved the submitted version.</p>
</sec>
<ack>
<p>The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University (KKU) for funding this research through the Research Group Program Under the Grant Number: (R.G.P.2/513/44). This work was supported by the Mid-Career Researcher Program (grant no. 2020R1A2C3004237) through the National Research Foundation of the Republic of Korea.</p>
</ack>
<sec sec-type="COI-statement" id="s10">
<title>Conflict of interest</title>
<p>The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.</p>
</sec>
<sec sec-type="disclaimer" id="s11">
<title>Publisher&#x2019;s note</title>
<p>All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors, and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.</p>
</sec>
<ref-list>
<title>References</title>
<ref id="B1">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Adesina</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Sustainable application of cenospheres in cementitious materials &#x2013; overview of performance</article-title>. <source>Dev. Built Environ.</source> <volume>4</volume>, <fpage>100029</fpage>. <pub-id pub-id-type="doi">10.1016/j.dibe.2020.100029</pub-id>
</citation>
</ref>
<ref id="B2">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Alam</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>K. K.</given-names>
</name>
<name>
<surname>Cabral&#x2010;Pinto</surname>
<given-names>M. M. S.</given-names>
</name>
<name>
<surname>Tavker</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Choudhary</surname>
<given-names>N.</given-names>
</name>
<etal/>
</person-group> (<year>2021</year>). <article-title>Recent advances in methods for the recovery of carbon nanominerals and polyaromatic hydrocarbons from coal fly ash and their emerging applications</article-title>. <source>Cryst. (Basel)</source> <volume>11</volume>, <fpage>88</fpage>&#x2013;<lpage>24</lpage>. <pub-id pub-id-type="doi">10.3390/cryst11020088</pub-id>
</citation>
</ref>
<ref id="B3">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Allen</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Hayhurst</surname>
<given-names>A. N.</given-names>
</name>
</person-group> (<year>1996</year>). <article-title>Reaction between gaseous sulfur dioxide and solid calcium oxide mechanism and kinetics</article-title>. <source>J. Chem. Soc. Faraday Trans.</source> <volume>92</volume>, <fpage>1227</fpage>&#x2013;<lpage>1238</lpage>. <pub-id pub-id-type="doi">10.1039/FT9969201227</pub-id>
</citation>
</ref>
<ref id="B4">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Alterary</surname>
<given-names>S. S.</given-names>
</name>
<name>
<surname>Marei</surname>
<given-names>N. H.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Fly ash properties, characterization, and applications: A review</article-title>. <source>J. King Saud. Univ. Sci.</source> <volume>33</volume>, <fpage>101536</fpage>. <pub-id pub-id-type="doi">10.1016/j.jksus.2021.101536</pub-id>
</citation>
</ref>
<ref id="B5">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Anshits</surname>
<given-names>N. N.</given-names>
</name>
<name>
<surname>Fedorchak</surname>
<given-names>M. A.</given-names>
</name>
<name>
<surname>Zhizhaev</surname>
<given-names>A. M.</given-names>
</name>
<name>
<surname>Sharonova</surname>
<given-names>O. M.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>A. G.</given-names>
</name>
</person-group> (<year>2018</year>). <article-title>Composition and structure of block-type ferrospheres isolated from calcium-rich power plant ash</article-title>. <source>Inorg. Mater.</source> <volume>54</volume>, <fpage>187</fpage>&#x2013;<lpage>194</lpage>. <pub-id pub-id-type="doi">10.1134/S0020168518020012</pub-id>
</citation>
</ref>
<ref id="B6">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Anshits</surname>
<given-names>N. N.</given-names>
</name>
<name>
<surname>Fomenko</surname>
<given-names>E. v.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>A. G.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Composition&#x2013;structure relationship and routes of formation of blocklike ferrospheres produced by pulverized combustion of two coal types</article-title>. <source>ACS Omega</source> <volume>6</volume>, <fpage>26004</fpage>&#x2013;<lpage>26015</lpage>. <pub-id pub-id-type="doi">10.1021/acsomega.1c02880</pub-id>
</citation>
</ref>
<ref id="B7">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Balapour</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Thway</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Rao</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Moser</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Garboczi</surname>
<given-names>E. J.</given-names>
</name>
<name>
<surname>Hsuan</surname>
<given-names>Y. G.</given-names>
</name>
<etal/>
</person-group> (<year>2022</year>). <article-title>A thermodynamics-guided framework to design lightweight aggregate from waste coal combustion fly ash</article-title>. <source>Resour. Conserv. Recycl</source> <volume>178</volume>, <fpage>106050</fpage>. <pub-id pub-id-type="doi">10.1016/j.resconrec.2021.106050</pub-id>
</citation>
</ref>
<ref id="B8">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Baziak</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>P&#x142;awecka</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Hager</surname>
<given-names>I.</given-names>
</name>
<name>
<surname>Castel</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Korniejenko</surname>
<given-names>K.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Development and characterization of lightweight geopolymer composite reinforced with hybrid carbon and steel fibers</article-title>. <source>Materials</source> <volume>14</volume>, <fpage>5741</fpage>. <pub-id pub-id-type="doi">10.3390/ma14195741</pub-id>
</citation>
</ref>
<ref id="B9">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Birla</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Mondal</surname>
<given-names>D. P.</given-names>
</name>
<name>
<surname>Das</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Kashyap</surname>
<given-names>D. K.</given-names>
</name>
<name>
<surname>Ch</surname>
<given-names>V. A. N.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Effect of cenosphere content on the compressive deformation behaviour of aluminum-cenosphere hybrid foam</article-title>. <source>Mater. Sci. Eng. A</source> <volume>685</volume>, <fpage>213</fpage>&#x2013;<lpage>226</lpage>. <pub-id pub-id-type="doi">10.1016/j.msea.2016.12.131</pub-id>
</citation>
</ref>
<ref id="B10">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Blissett</surname>
<given-names>R. S.</given-names>
</name>
<name>
<surname>Rowson</surname>
<given-names>N. A.</given-names>
</name>
</person-group> (<year>2012</year>). <article-title>A review of the multi-component utilisation of coal fly ash</article-title>. <source>Fuel</source> <volume>97</volume>, <fpage>1</fpage>&#x2013;<lpage>23</lpage>. <pub-id pub-id-type="doi">10.1016/j.fuel.2012.03.024</pub-id>
</citation>
</ref>
<ref id="B11">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chepaitis</surname>
<given-names>P. S.</given-names>
</name>
<name>
<surname>Millette</surname>
<given-names>J. R.</given-names>
</name>
<name>
<surname>Wood</surname>
<given-names>T. B. V.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>A novel coal fly ash sphere reveals a Complete understanding of Plerosphere Formation</article-title>. <source>Microscope</source> <volume>59</volume>, <fpage>175</fpage>&#x2013;<lpage>180</lpage>.</citation>
</ref>
<ref id="B12">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Choo</surname>
<given-names>T. F.</given-names>
</name>
<name>
<surname>Salleh</surname>
<given-names>M. A. M.</given-names>
</name>
<name>
<surname>Kok</surname>
<given-names>K. Y.</given-names>
</name>
<name>
<surname>Matori</surname>
<given-names>K. A.</given-names>
</name>
<name>
<surname>Rashid</surname>
<given-names>S. A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Effect of temperature on morphology, phase transformations and thermal expansions of coal fly ash cenospheres</article-title>. <source>Cryst. (Basel)</source> <volume>10</volume>, <fpage>1</fpage>&#x2013;<lpage>11</lpage>. <pub-id pub-id-type="doi">10.3390/cryst10060481</pub-id>
</citation>
</ref>
<ref id="B13">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Choudhary</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Malik</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Khan</surname>
<given-names>S. H.</given-names>
</name>
<name>
<surname>Inwati</surname>
<given-names>G. K.</given-names>
</name>
<name>
<surname>Suriyaprabha</surname>
<given-names>R.</given-names>
</name>
<etal/>
</person-group> (<year>2020</year>). &#x201c;<article-title>Recovery of natural nanostructured minerals: Ferrospheres, plerospheres, cenospheres, and carbonaceous particles from fly ash</article-title>,&#x201d; in <source>Handbook of research on emerging developments and environmental impacts of ecological chemistry</source>. (<publisher-loc>Hershey, PA</publisher-loc>: <publisher-name>IGI Global</publisher-name>), <fpage>450</fpage>&#x2013;<lpage>470</lpage>.</citation>
</ref>
<ref id="B14">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Danish</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Mosaberpanah</surname>
<given-names>M. A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Formation mechanism and applications of cenospheres: A review</article-title>. <source>J. Mater Sci.</source> <volume>55</volume>, <fpage>4539</fpage>&#x2013;<lpage>4557</lpage>. <pub-id pub-id-type="doi">10.1007/s10853-019-04341-7</pub-id>
</citation>
</ref>
<ref id="B15">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Das</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Boruah</surname>
<given-names>P. K.</given-names>
</name>
<name>
<surname>Das</surname>
<given-names>M. R.</given-names>
</name>
<name>
<surname>Saikia</surname>
<given-names>B. K.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Formation of onion-like fullerene and chemically converted graphene-like nanosheets from low-quality coals: Application in photocatalytic degradation of 2-nitrophenol</article-title>. <source>RSC Adv.</source> <volume>6</volume>, <fpage>35177</fpage>&#x2013;<lpage>35190</lpage>. <pub-id pub-id-type="doi">10.1039/C6RA04392E</pub-id>
</citation>
</ref>
<ref id="B16">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Decker</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Klabunde</surname>
<given-names>K. J.</given-names>
</name>
</person-group> (<year>1996</year>). <article-title>Enhancing effect of Fe2O3 on the ability of nanocrystalline calcium oxide to adsorb SO2</article-title>. <source>J. Am. Chem. Soc.</source> <volume>118</volume>, <fpage>12465</fpage>&#x2013;<lpage>12466</lpage>. <pub-id pub-id-type="doi">10.1021/ja962371e</pub-id>
</citation>
</ref>
<ref id="B17">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Dindi</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Quang</surname>
<given-names>D. V.</given-names>
</name>
<name>
<surname>Vega</surname>
<given-names>L. F.</given-names>
</name>
<name>
<surname>Nashef</surname>
<given-names>E.</given-names>
</name>
<name>
<surname>Abu-Zahra</surname>
<given-names>M. R. M.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Applications of fly ash for CO2 capture, utilization, and storage</article-title>. <source>J. CO2 Util.</source> <volume>29</volume>, <fpage>82</fpage>&#x2013;<lpage>102</lpage>. <pub-id pub-id-type="doi">10.1016/j.jcou.2018.11.011</pub-id>
</citation>
</ref>
<ref id="B18">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>dos Santos</surname>
<given-names>R. P.</given-names>
</name>
<name>
<surname>Martins</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Gadelha</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Cavada</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Albertini</surname>
<given-names>A. V.</given-names>
</name>
<name>
<surname>Arruda</surname>
<given-names>F.</given-names>
</name>
<etal/>
</person-group> (<year>2014</year>). <article-title>Coal fly ash ceramics: Preparation, characterization, and use in the Hydrolysis of sucrose</article-title>. <source>Sci. World J.</source> <volume>2014</volume>, <fpage>154651</fpage>&#x2013;<lpage>154657</lpage>. <pub-id pub-id-type="doi">10.1155/2014/154651</pub-id>
</citation>
</ref>
<ref id="B19">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Eisele</surname>
<given-names>T. C.</given-names>
</name>
<name>
<surname>Kawatra</surname>
<given-names>S. K.</given-names>
</name>
</person-group> (<year>2002</year>). <article-title>Use of froth flotation to remove unburned carbon from fly ash</article-title>. <source>Mineral Process. Extr. Metallurgy Rev.</source> <volume>23</volume>, <fpage>1</fpage>&#x2013;<lpage>10</lpage>. <pub-id pub-id-type="doi">10.1080/08827500214516</pub-id>
</citation>
</ref>
<ref id="B20">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ferrarini</surname>
<given-names>S. F.</given-names>
</name>
<name>
<surname>Cardoso</surname>
<given-names>A. M.</given-names>
</name>
<name>
<surname>Paprocki</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Pires</surname>
<given-names>M.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Integrated synthesis of zeolites using coal fly ash: Element distribution in the products, washing waters and effluent</article-title>. <source>J. Braz Chem. Soc.</source> <volume>27</volume>, <fpage>2034</fpage>&#x2013;<lpage>2045</lpage>. <pub-id pub-id-type="doi">10.5935/0103-5053.20160093</pub-id>
</citation>
</ref>
<ref id="B21">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Fisher</surname>
<given-names>G. L.</given-names>
</name>
<name>
<surname>Chang</surname>
<given-names>D. P. Y.</given-names>
</name>
<name>
<surname>Brummer</surname>
<given-names>M.</given-names>
</name>
</person-group> (<year>1976</year>). <article-title>Fly ash collected from electrostatic precipitators: Microcrystalline structures and the mystery of the spheres</article-title>. <source>Sci. (1979)</source> <volume>192</volume>, <fpage>553</fpage>&#x2013;<lpage>555</lpage>. <pub-id pub-id-type="doi">10.1126/science.192.4239.553</pub-id>
</citation>
</ref>
<ref id="B22">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Fomenko</surname>
<given-names>E. V.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>N. N.</given-names>
</name>
<name>
<surname>Pankova</surname>
<given-names>M. V.</given-names>
</name>
<name>
<surname>Solovyov</surname>
<given-names>L. A.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>A. G.</given-names>
</name>
</person-group> (<year>2011</year>). &#x201c;<article-title>Fly ash cenospheres: Composition, morphology, structure, and helium permeability</article-title>,&#x201d; in <source>World of coal ash (WOCA) conference</source> (<publisher-loc>Denver, USA</publisher-loc>. <comment>Available at: <ext-link ext-link-type="uri" xlink:href="http://www.flyash.info/">http://www.flyash.info/</ext-link>
</comment>.</citation>
</ref>
<ref id="B23">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Fomenko</surname>
<given-names>E. v.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>N. N.</given-names>
</name>
<name>
<surname>Solovyov</surname>
<given-names>L. A.</given-names>
</name>
<name>
<surname>Knyazev</surname>
<given-names>Y. v.</given-names>
</name>
<name>
<surname>Semenov</surname>
<given-names>S. v.</given-names>
</name>
<name>
<surname>Bayukov</surname>
<given-names>O. A.</given-names>
</name>
<etal/>
</person-group> (<year>2021</year>). <article-title>Magnetic fractions of PM2.5, pm2.5&#x2013;10, and PM10 from coal fly ash as environmental pollutants</article-title>. <source>ACS Omega</source> <volume>6</volume>, <fpage>20076</fpage>&#x2013;<lpage>20085</lpage>. <pub-id pub-id-type="doi">10.1021/acsomega.1c03187</pub-id>
</citation>
</ref>
<ref id="B24">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Georgiadis</surname>
<given-names>A. G.</given-names>
</name>
<name>
<surname>Charisiou</surname>
<given-names>N. D.</given-names>
</name>
<name>
<surname>Goula</surname>
<given-names>M. A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Removal of hydrogen sulfide from various industrial gases: A review of the most promising adsorbing materials</article-title>. <source>Catalysts</source> <volume>10</volume>, <fpage>521</fpage>. <pub-id pub-id-type="doi">10.3390/catal10050521</pub-id>
</citation>
</ref>
<ref id="B25">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gnanamoorthy</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Priya</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Ali</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Lakshmi</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Varghese</surname>
<given-names>R.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>A new CuZr2S4/rGO and their reduced graphene oxide nanocomposities enhanced photocatalytic and antimicrobial activities</article-title>. <source>Chem. Phys. Lett.</source> <volume>781</volume>, <fpage>139011</fpage>. <pub-id pub-id-type="doi">10.1016/j.cplett.2021.139011</pub-id>
</citation>
</ref>
<ref id="B26">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gollakota</surname>
<given-names>A. R. K.</given-names>
</name>
<name>
<surname>Volli</surname>
<given-names>V.</given-names>
</name>
<name>
<surname>Shu</surname>
<given-names>C. M.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Progressive utilisation prospects of coal fly ash: A review</article-title>. <source>Sci. Total Environ.</source> <volume>672</volume>, <fpage>951</fpage>&#x2013;<lpage>989</lpage>. <pub-id pub-id-type="doi">10.1016/j.scitotenv.2019.03.337</pub-id>
</citation>
</ref>
<ref id="B27">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Goodarzi</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Sanei</surname>
<given-names>H.</given-names>
</name>
</person-group> (<year>2009</year>). <article-title>Plerosphere and its role in reduction of emitted fine fly ash particles from pulverized coal-fired power plants</article-title>. <source>Fuel</source> <volume>88</volume>, <fpage>382</fpage>&#x2013;<lpage>386</lpage>. <pub-id pub-id-type="doi">10.1016/j.fuel.2008.08.015</pub-id>
</citation>
</ref>
<ref id="B28">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Guedes</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Valentim</surname>
<given-names>B.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Editorial for special issue &#x201c;minerals and elements from fly ash and bottom ash as a source of secondary raw materials&#x201d;</article-title>. <source>Minerals</source> <volume>11</volume>, <fpage>438</fpage>. <pub-id pub-id-type="doi">10.3390/min11050438</pub-id>
</citation>
</ref>
<ref id="B29">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gupta</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Sharma</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2003</year>). <article-title>Removal of zinc from aqueous solutions using bagasse fly ash &#x2212; a low cost adsorbent</article-title>. <source>Ind. Eng. Chem. Res.</source> <volume>42</volume>, <fpage>6619</fpage>&#x2013;<lpage>6624</lpage>. <pub-id pub-id-type="doi">10.1021/ie0303146</pub-id>
</citation>
</ref>
<ref id="B30">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gupta</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Mittal</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Gajbe</surname>
<given-names>V.</given-names>
</name>
<name>
<surname>Mittal</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2008</year>). <article-title>Adsorption of basic fuchsin using waste materials&#x2014;Bottom ash and deoiled soya&#x2014;As adsorbents</article-title>. <source>J. Colloid Interface Sci.</source> <volume>319</volume>, <fpage>30</fpage>&#x2013;<lpage>39</lpage>. <pub-id pub-id-type="doi">10.1016/j.jcis.2007.09.091</pub-id>
</citation>
</ref>
<ref id="B31">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gupta</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>K. K.</given-names>
</name>
<name>
<surname>Alwetaishi</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Gnanamoorthy</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Singh</surname>
<given-names>B.</given-names>
</name>
<etal/>
</person-group> (<year>2022</year>). <article-title>Recovery of iron nanominerals from sacred incense sticks ash waste collected from temples by wet and dry magnetic separation method</article-title>. <source>Environ. Technol. Innov.</source> <volume>25</volume>, <fpage>102150</fpage>. <pub-id pub-id-type="doi">10.1016/j.eti.2021.102150</pub-id>
</citation>
</ref>
<ref id="B32">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Guzm&#xe1;n-Carrillo</surname>
<given-names>H. R.</given-names>
</name>
<name>
<surname>P&#xe9;rez</surname>
<given-names>J. M.</given-names>
</name>
<name>
<surname>Aguilar Reyes</surname>
<given-names>E. A.</given-names>
</name>
<name>
<surname>Romero</surname>
<given-names>M.</given-names>
</name>
</person-group> (<year>2018</year>). <article-title>Coal fly ash and steel slag valorisation throughout a vitrification process</article-title>. <source>Int. J. Environ. Sci. Technol.</source> <volume>15</volume>, <fpage>1757</fpage>&#x2013;<lpage>1766</lpage>. <pub-id pub-id-type="doi">10.1007/s13762-017-1542-5</pub-id>
</citation>
</ref>
<ref id="B33">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Han</surname>
<given-names>G.-C.</given-names>
</name>
<name>
<surname>Um</surname>
<given-names>N.-I.</given-names>
</name>
<name>
<surname>You</surname>
<given-names>K.-S.</given-names>
</name>
<name>
<surname>Cho</surname>
<given-names>H.-C.</given-names>
</name>
<name>
<surname>Ahn</surname>
<given-names>J.-W.</given-names>
</name>
</person-group> (<year>2009</year>). <article-title>Recovery of ferromagnetic material by wet magnetic separation in coal bottom ash</article-title>. <source>Geosystem Eng.</source> <volume>12</volume>, <fpage>9</fpage>&#x2013;<lpage>12</lpage>. <pub-id pub-id-type="doi">10.1080/12269328.2009.10541292</pub-id>
</citation>
</ref>
<ref id="B34">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Haustein</surname>
<given-names>E.</given-names>
</name>
<name>
<surname>Kury&#x142;owicz&#x2010;Cudowska</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>The effect of fly ash microspheres on the pore structure of concrete</article-title>. <source>Minerals</source> <volume>10</volume>, <fpage>58</fpage>. <pub-id pub-id-type="doi">10.3390/min10010058</pub-id>
</citation>
</ref>
<ref id="B35">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kaasik</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Alliksaar</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Ivask</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Loosaar</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2005</year>). <article-title>Spherical fly ash particles from oil shale fired power plants in atmospheric precipitations. Possibilities of quantitative tracing</article-title>. <source>Oil Shale</source> <volume>22</volume>, <fpage>547</fpage>&#x2013;<lpage>562</lpage>.</citation>
</ref>
<ref id="B36">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kanhar</surname>
<given-names>A. H.</given-names>
</name>
<name>
<surname>Chen</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>F.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Incineration fly ash and its treatment to possible utilization: A review</article-title>. <source>Energies (Basel)</source> <volume>13</volume>, <fpage>6681</fpage>. <pub-id pub-id-type="doi">10.3390/en13246681</pub-id>
</citation>
</ref>
<ref id="B37">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Khoshnoud</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Abu-Zahra</surname>
<given-names>N.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Effect of cenosphere fly ash on the thermal, mechanical, and morphological properties of rigid PVC foam composites</article-title>. <source>J. Res. Updat. Polym. Sci.</source> <volume>4</volume>, <fpage>1</fpage>&#x2013;<lpage>14</lpage>. <pub-id pub-id-type="doi">10.6000/1929-5995.2015.04.01.1</pub-id>
</citation>
</ref>
<ref id="B38">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kolay</surname>
<given-names>P. K.</given-names>
</name>
<name>
<surname>Singh</surname>
<given-names>D. N.</given-names>
</name>
</person-group> (<year>2001</year>). <article-title>Physical, chemical, mineralogical, and thermal properties of cenospheres from an ash lagoon</article-title>. <source>Cem. Concr. Res.</source> <volume>31</volume>, <fpage>539</fpage>&#x2013;<lpage>542</lpage>. <pub-id pub-id-type="doi">10.1016/S0008-8846(01)00457-4</pub-id>
</citation>
</ref>
<ref id="B39">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kutchko</surname>
<given-names>B. G.</given-names>
</name>
<name>
<surname>Kim</surname>
<given-names>A. G.</given-names>
</name>
</person-group> (<year>2006</year>). <article-title>Fly ash characterization by SEM&#x2013;EDS</article-title>. <source>Fuel</source> <volume>85</volume>, <fpage>2537</fpage>&#x2013;<lpage>2544</lpage>. <pub-id pub-id-type="doi">10.1016/j.fuel.2006.05.016</pub-id>
</citation>
</ref>
<ref id="B40">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Li</surname>
<given-names>X.-Y.</given-names>
</name>
<name>
<surname>Jiang</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>X.-Q.</given-names>
</name>
<name>
<surname>Shi</surname>
<given-names>L.-Y.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>D.-Y.</given-names>
</name>
<name>
<surname>Sun</surname>
<given-names>L.-B.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Direct synthesis of zeolites from a natural clay, attapulgite</article-title>. <source>ACS Sustain Chem. Eng.</source> <volume>5</volume>, <fpage>6124</fpage>&#x2013;<lpage>6130</lpage>. <pub-id pub-id-type="doi">10.1021/acssuschemeng.7b01001</pub-id>
</citation>
</ref>
<ref id="B41">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Liu</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Duan</surname>
<given-names>Y. Y.</given-names>
</name>
<name>
<surname>Yang</surname>
<given-names>Z.</given-names>
</name>
<name>
<surname>Yu</surname>
<given-names>H. T.</given-names>
</name>
</person-group> (<year>2014</year>). <article-title>A new route for unburned carbon concentration measurements eliminating mineral content and coal rank effects</article-title>. <source>Sci. Rep.</source> <volume>4</volume>, <fpage>4567</fpage>. <pub-id pub-id-type="doi">10.1038/srep04567</pub-id>
</citation>
</ref>
<ref id="B42">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Liu</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Sun</surname>
<given-names>Q.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Zou</surname>
<given-names>J.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Morphology and composition of microspheres in fly ash from the luohuang power plant, Chongqing, Southwestern China</article-title>. <source>Minerals</source> <volume>6</volume>, <fpage>30</fpage>. <pub-id pub-id-type="doi">10.3390/min6020030</pub-id>
</citation>
</ref>
<ref id="B43">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Liu</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>H. Q.</given-names>
</name>
<name>
<surname>Wei</surname>
<given-names>G. X.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Zeng</surname>
<given-names>T. T.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>G. S.</given-names>
</name>
<etal/>
</person-group> (<year>2018</year>). <article-title>Characteristics and treatment methods of medical waste incinerator fly ash: A review</article-title>. <source>Processes</source> <volume>6</volume>, <fpage>173</fpage>. <pub-id pub-id-type="doi">10.3390/pr6100173</pub-id>
</citation>
</ref>
<ref id="B44">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Lv</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Jiao</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Chen</surname>
<given-names>Z.</given-names>
</name>
<name>
<surname>Dong</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Fang</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>C.</given-names>
</name>
<etal/>
</person-group> (<year>2022</year>). <article-title>Separation of unburned carbon from coal fly ash: Pre-classification in liquid&#x2013;solid fluidized beds and subsequent flotation</article-title>. <source>Process Saf. Environ. Prot.</source> <volume>165</volume>, <fpage>408</fpage>&#x2013;<lpage>419</lpage>. <pub-id pub-id-type="doi">10.1016/j.psep.2022.07.031</pub-id>
</citation>
</ref>
<ref id="B45">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Marinina</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Nevskaya</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Jonek-Kowalska</surname>
<given-names>I.</given-names>
</name>
<name>
<surname>Wolniak</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Marinin</surname>
<given-names>M.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Recycling of coal fly ash as an example of an efficient circular economy: A stakeholder approach</article-title>. <source>Energies (Basel)</source> <volume>14</volume>, <fpage>3597</fpage>. <pub-id pub-id-type="doi">10.3390/en14123597</pub-id>
</citation>
</ref>
<ref id="B46">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Markandeya</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Shukla</surname>
<given-names>S. P.</given-names>
</name>
<name>
<surname>Srivastav</surname>
<given-names>A. L.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Removal of Disperse Orange and Disperse Blue dyes present in textile mill effluent using zeolite synthesized from cenospheres</article-title>. <source>Water Sci. Technol.</source> <volume>84</volume>, <fpage>445</fpage>&#x2013;<lpage>457</lpage>. <pub-id pub-id-type="doi">10.2166/wst.2021.216</pub-id>
</citation>
</ref>
<ref id="B47">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Mohammed</surname>
<given-names>S. A.</given-names>
</name>
<name>
<surname>Koting</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Katman</surname>
<given-names>H. Y. B.</given-names>
</name>
<name>
<surname>Babalghaith</surname>
<given-names>A. M.</given-names>
</name>
<name>
<surname>Patah</surname>
<given-names>M. F. A.</given-names>
</name>
<name>
<surname>Ibrahim</surname>
<given-names>M. R.</given-names>
</name>
<etal/>
</person-group> (<year>2021</year>). <article-title>A review of the utilization of coal bottom ash (Cba) in the construction industry</article-title>. <source>Sustain. Switz.</source> <volume>13</volume>, <fpage>8031</fpage>. <pub-id pub-id-type="doi">10.3390/su13148031</pub-id>
</citation>
</ref>
<ref id="B48">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Naeem</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Khoja</surname>
<given-names>A. H.</given-names>
</name>
<name>
<surname>Butt</surname>
<given-names>F. A.</given-names>
</name>
<name>
<surname>Arfan</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Liaquat</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Hasnat</surname>
<given-names>A. U.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>Partial oxidation of methane over biomass fly ash (BFA)-supported Ni/CaO catalyst for hydrogen-rich syngas production</article-title>. <source>Res. Chem. Intermed.</source> <volume>48</volume>, <fpage>2007</fpage>&#x2013;<lpage>2034</lpage>. <pub-id pub-id-type="doi">10.1007/s11164-022-04685-x</pub-id>
</citation>
</ref>
<ref id="B49">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Nakonieczny</surname>
<given-names>D. S.</given-names>
</name>
<name>
<surname>Antonowicz</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Paszenda</surname>
<given-names>Z. K.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Cenospheres and their application advantages in biomedical engineering - a systematic review</article-title>. <source>Rev. Adv. Mater. Sci.</source> <volume>59</volume>, <fpage>115</fpage>&#x2013;<lpage>130</lpage>. <pub-id pub-id-type="doi">10.1515/rams-2020-0011</pub-id>
</citation>
</ref>
<ref id="B50">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ngu</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Wu</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>D.</given-names>
</name>
</person-group> (<year>2007</year>). <article-title>Characterization of ash cenospheres in fly ash from Australian power stations</article-title>. <source>Energy &#x26; Fuels</source> <volume>21</volume>, <fpage>3437</fpage>&#x2013;<lpage>3445</lpage>. <pub-id pub-id-type="doi">10.1021/ef700340k</pub-id>
</citation>
</ref>
<ref id="B51">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Noor-ul-Amin</surname>
<given-names>N. I. J. A.</given-names>
</name>
</person-group> (<year>2014</year>). <article-title>A multi-directional utilization of different ashes</article-title>. <source>RSC Adv.</source> <volume>4</volume>, <fpage>62769</fpage>&#x2013;<lpage>62788</lpage>. <pub-id pub-id-type="doi">10.1039/C4RA06568A</pub-id>
</citation>
</ref>
<ref id="B52">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Peloso</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Rovatti</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Ferraiolo</surname>
<given-names>G.</given-names>
</name>
</person-group> (<year>1983</year>). <article-title>Fly ash as adsorbent material for toluene vapours</article-title>. <source>Resour. Conservation</source> <volume>10</volume>, <fpage>211</fpage>&#x2013;<lpage>220</lpage>. <pub-id pub-id-type="doi">10.1016/0166-3097(83)90015-9</pub-id>
</citation>
</ref>
<ref id="B53">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Petrus</surname>
<given-names>H. T. B. M.</given-names>
</name>
<name>
<surname>Hirajima</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Oosako</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Nonaka</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Sasaki</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Ando</surname>
<given-names>T.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>Performance of dry-separation processes in the recovery of cenospheres from fly ash and their implementation in a recovery unit</article-title>. <source>Int. J. Min. Process</source> <volume>98</volume>, <fpage>15</fpage>&#x2013;<lpage>23</lpage>. <pub-id pub-id-type="doi">10.1016/j.minpro.2010.09.002</pub-id>
</citation>
</ref>
<ref id="B54">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Qian</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Xuan</surname>
<given-names>X. Y.</given-names>
</name>
</person-group> (<year>2018</year>). <article-title>Hyperthermal atomic oxygen durable transparent silicon-reinforced polyimide</article-title>. <source>High. Perform. Polym.</source> <volume>31</volume>, <fpage>831</fpage>&#x2013;<lpage>842</lpage>. <pub-id pub-id-type="doi">10.1177/0954008318802939</pub-id>
</citation>
</ref>
<ref id="B55">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Rothenberg</surname>
<given-names>S. J.</given-names>
</name>
<name>
<surname>Mettzler</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Poliner</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Bechtold</surname>
<given-names>W. E.</given-names>
</name>
<name>
<surname>Eidson</surname>
<given-names>A. F.</given-names>
</name>
<name>
<surname>Newton</surname>
<given-names>G. J.</given-names>
</name>
</person-group> (<year>1991</year>). <article-title>Adsorption kinetics of vapor-phase m-xylene on coal fly ash</article-title>. <source>Environ. Sci. Technol.</source> <volume>25</volume>, <fpage>930</fpage>&#x2013;<lpage>935</lpage>. <pub-id pub-id-type="doi">10.1021/es00017a016</pub-id>
</citation>
</ref>
<ref id="B56">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Schraufnagel</surname>
<given-names>D. E.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>The health effects of ultrafine particles</article-title>. <source>Exp. Mol. Med.</source> <volume>52</volume>, <fpage>311</fpage>&#x2013;<lpage>317</lpage>. <pub-id pub-id-type="doi">10.1038/s12276-020-0403-3</pub-id>
</citation>
</ref>
<ref id="B57">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Sharonova</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Akimochkina</surname>
<given-names>G.</given-names>
</name>
</person-group> (<year>2003</year>). <article-title>Composition and morphology of magnetic microspheres in power plant fly ash of coal from the Ekibastuz and Kuznetsk basins</article-title>. <source>Chem. Sustain. Dev.</source> <volume>11</volume>, <fpage>639</fpage>&#x2013;<lpage>648</lpage>. <comment>Available at: <ext-link ext-link-type="uri" xlink:href="https://www.researchgate.net/publication/292796411">https://www.researchgate.net/publication/292796411</ext-link>
</comment>.</citation>
</ref>
<ref id="B58">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Sharonova</surname>
<given-names>O. M.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>N. N.</given-names>
</name>
<name>
<surname>Fedorchak</surname>
<given-names>M. A.</given-names>
</name>
<name>
<surname>Zhizhaev</surname>
<given-names>A. M.</given-names>
</name>
<name>
<surname>Anshits</surname>
<given-names>A. G.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Characterization of ferrospheres recovered from high-calcium fly ash</article-title>. <source>Energy &#x26; Fuels</source> <volume>29</volume>, <fpage>5404</fpage>&#x2013;<lpage>5414</lpage>. <pub-id pub-id-type="doi">10.1021/acs.energyfuels.5b01618</pub-id>
</citation>
</ref>
<ref id="B59">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Shoumkova</surname>
<given-names>A. S.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>Magnetic separation of coal fly ash from Bulgarian power plants</article-title>. <source>Waste Manag. Res.</source> <volume>29</volume>, <fpage>1078</fpage>&#x2013;<lpage>1089</lpage>. <pub-id pub-id-type="doi">10.1177/0734242X10379494</pub-id>
</citation>
</ref>
<ref id="B60">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Snellings</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Kazemi-Kamyab</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Nielsen</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>van den Abeele</surname>
<given-names>L.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Classification and milling increase fly ash pozzolanic reactivity</article-title>. <source>Front. Built Environ.</source> <volume>7</volume>, <fpage>44</fpage>. <pub-id pub-id-type="doi">10.3389/fbuil.2021.670996</pub-id>
</citation>
</ref>
<ref id="B61">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Sokol</surname>
<given-names>E. v.</given-names>
</name>
<name>
<surname>Kalugin</surname>
<given-names>V. M.</given-names>
</name>
<name>
<surname>Nigmatulina</surname>
<given-names>E. N.</given-names>
</name>
<name>
<surname>Volkova</surname>
<given-names>N. I.</given-names>
</name>
<name>
<surname>Frenkel</surname>
<given-names>A. E.</given-names>
</name>
<name>
<surname>Maksimova</surname>
<given-names>N. V.</given-names>
</name>
</person-group> (<year>2002</year>). <article-title>Ferrospheres from fly ashes of Chelyabinsk coals: Chemical composition, morphology and formation conditions</article-title>. <source>Fuel</source> <volume>81</volume>, <fpage>867</fpage>&#x2013;<lpage>876</lpage>. <pub-id pub-id-type="doi">10.1016/S0016-2361(02)00005-4</pub-id>
</citation>
</ref>
<ref id="B62">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Sokolar</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Vodova</surname>
<given-names>L.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>The effect of fluidized fly ash on the properties of dry pressed ceramic tiles based on fly ash&#x2013;clay body</article-title>. <source>Ceram. Int.</source> <volume>37</volume>, <fpage>2879</fpage>&#x2013;<lpage>2885</lpage>. <pub-id pub-id-type="doi">10.1016/j.ceramint.2011.05.005</pub-id>
</citation>
</ref>
<ref id="B63">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Song</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Ren</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Long</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Zhu</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Teng</surname>
<given-names>Z.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>M.</given-names>
</name>
<etal/>
</person-group> (<year>2021</year>). <article-title>Preparation of activated carbon from unburned carbon in biomass fly ash and its supercapacitor performance</article-title>. <source>J. Fuel Chem. Technol.</source> <volume>49</volume>, <fpage>1936</fpage>&#x2013;<lpage>1942</lpage>. <pub-id pub-id-type="doi">10.1016/S1872-5813(21)60129-9</pub-id>
</citation>
</ref>
<ref id="B64">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Strza&#x142;kowska</surname>
<given-names>E.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Morphology and chemical composition of mineral matter present in fly ashes of bituminous coal and lignite</article-title>. <source>Int. J. Environ. Sci. Technol.</source> <volume>18</volume>, <fpage>2533</fpage>&#x2013;<lpage>2544</lpage>. <pub-id pub-id-type="doi">10.1007/s13762-020-03016-0</pub-id>
</citation>
</ref>
<ref id="B65">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Sunjidmaa</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Batdemberel</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Takibai</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>A study of ferrospheres in the coal fly ash</article-title>. <source>Open J. Appl. Sci.</source> <volume>09</volume>, <fpage>10</fpage>&#x2013;<lpage>16</lpage>. <pub-id pub-id-type="doi">10.4236/ojapps.2019.91002</pub-id>
</citation>
</ref>
<ref id="B66">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Tiwari</surname>
<given-names>M. K.</given-names>
</name>
<name>
<surname>Bajpai</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Dewangan</surname>
<given-names>U. K.</given-names>
</name>
<name>
<surname>Tamrakar</surname>
<given-names>R. K.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Suitability of leaching test methods for fly ash and slag: A review</article-title>. <source>J. Radiat. Res. Appl. Sci.</source> <volume>8</volume>, <fpage>523</fpage>&#x2013;<lpage>537</lpage>. <pub-id pub-id-type="doi">10.1016/j.jrras.2015.06.003</pub-id>
</citation>
</ref>
<ref id="B67">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Tiwari</surname>
<given-names>A. J.</given-names>
</name>
<name>
<surname>Ashraf-Khorassani</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Marr</surname>
<given-names>L. C.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>C60 fullerenes from combustion of common fuels</article-title>. <source>Sci. Total Environ.</source> <volume>547</volume>, <fpage>254</fpage>&#x2013;<lpage>260</lpage>. <pub-id pub-id-type="doi">10.1016/j.scitotenv.2015.12.142</pub-id>
</citation>
</ref>
<ref id="B68">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Um</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Jeon</surname>
<given-names>T.-W.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Pretreatment method for the utilization of the coal ash landfilled in ash ponds</article-title>. <source>Process Saf. Environ. Prot.</source> <volume>153</volume>, <fpage>192</fpage>&#x2013;<lpage>204</lpage>. <pub-id pub-id-type="doi">10.1016/j.psep.2021.07.013</pub-id>
</citation>
</ref>
<ref id="B69">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Umejuru</surname>
<given-names>E. C.</given-names>
</name>
<name>
<surname>Prabakaran</surname>
<given-names>E.</given-names>
</name>
<name>
<surname>Pillay</surname>
<given-names>K.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Coal fly ash decorated with graphene oxide-tungsten oxide nanocomposite for rapid removal of Pb(2&#x2b;) ions and reuse of spent adsorbent for photocatalytic degradation of acetaminophen</article-title>. <source>ACS Omega</source> <volume>6</volume>, <fpage>11155</fpage>&#x2013;<lpage>11172</lpage>. <pub-id pub-id-type="doi">10.1021/acsomega.0c04194</pub-id>
</citation>
</ref>
<ref id="B70">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Valeev</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Kunilova</surname>
<given-names>I.</given-names>
</name>
<name>
<surname>Alpatov</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Varnavskaya</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Ju</surname>
<given-names>D.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Magnetite and carbon extraction from coal fly ash using magnetic separation and flotation methods</article-title>. <source>Minerals</source> <volume>9</volume>, <fpage>320</fpage>. <pub-id pub-id-type="doi">10.3390/min9050320</pub-id>
</citation>
</ref>
<ref id="B71">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Valentim</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Shreya</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Paul</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Gomes</surname>
<given-names>C. S.</given-names>
</name>
<name>
<surname>Sant&#x2019;Ovaia</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Guedes</surname>
<given-names>A.</given-names>
</name>
<etal/>
</person-group> (<year>2016</year>). <article-title>Characteristics of ferrospheres in fly ashes derived from Bokaro and Jharia (Jharkand, India) coals</article-title>. <source>Int. J. Coal Geol.</source> <volume>153</volume>, <fpage>52</fpage>&#x2013;<lpage>74</lpage>. <pub-id pub-id-type="doi">10.1016/j.coal.2015.11.013</pub-id>
</citation>
</ref>
<ref id="B72">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Varshney</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Dahiya</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Sharma</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Pandey</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Mohan</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>Fly ash application in soil for sustainable agriculture: An Indian overview</article-title>. <source>Energy Ecol. Environ.</source> <volume>7</volume>, <fpage>340</fpage>&#x2013;<lpage>357</lpage>. <pub-id pub-id-type="doi">10.1007/s40974-022-00241-w</pub-id>
</citation>
</ref>
<ref id="B73">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Vereshchagina</surname>
<given-names>T. A.</given-names>
</name>
<name>
<surname>Kutikhina</surname>
<given-names>E. A.</given-names>
</name>
<name>
<surname>Solovyov</surname>
<given-names>L. A.</given-names>
</name>
<name>
<surname>Vereshchagin</surname>
<given-names>S. N.</given-names>
</name>
<name>
<surname>Mazurova</surname>
<given-names>E. v.</given-names>
</name>
<name>
<surname>Chernykh</surname>
<given-names>Y. Yu.</given-names>
</name>
<etal/>
</person-group> (<year>2018</year>). <article-title>Synthesis and structure of analcime and analcime-zirconia composite derived from coal fly ash cenospheres</article-title>. <source>Microporous Mesoporous Mater.</source> <volume>258</volume>, <fpage>228</fpage>&#x2013;<lpage>235</lpage>. <pub-id pub-id-type="doi">10.1016/j.micromeso.2017.09.011</pub-id>
</citation>
</ref>
<ref id="B74">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Vu</surname>
<given-names>D. H.</given-names>
</name>
<name>
<surname>Bui</surname>
<given-names>H. B.</given-names>
</name>
<name>
<surname>Kalantar</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Bui</surname>
<given-names>X. N.</given-names>
</name>
<name>
<surname>Nguyen</surname>
<given-names>D. A.</given-names>
</name>
<name>
<surname>Le</surname>
<given-names>Q. T.</given-names>
</name>
<etal/>
</person-group> (<year>2019</year>). <article-title>Composition and morphology characteristics of magnetic fractions of coal fly ash wastes processed in high-temperature exposure in thermal power plants</article-title>. <source>Appl. Sci. Switz.</source> <volume>9</volume>, <fpage>1964</fpage>. <pub-id pub-id-type="doi">10.3390/app9091964</pub-id>
</citation>
</ref>
<ref id="B75">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Waanders</surname>
<given-names>F. B.</given-names>
</name>
<name>
<surname>Vinken</surname>
<given-names>E.</given-names>
</name>
<name>
<surname>Mans</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Mulaba-Bafubiandi</surname>
<given-names>A. F.</given-names>
</name>
</person-group> (<year>2003</year>). <article-title>Iron minerals in coal, weathered coal and coal ash &#x2013; SEM and m&#xf6;ssbauer results</article-title>. <source>Hyperfine Interact.</source> <volume>148</volume>, <fpage>21</fpage>&#x2013;<lpage>29</lpage>. <pub-id pub-id-type="doi">10.1023/B:HYPE.0000003760.89706.f6</pub-id>
</citation>
</ref>
<ref id="B76">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Wang</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Shen</surname>
<given-names>Z.</given-names>
</name>
<name>
<surname>Cai</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Ma</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Xing</surname>
<given-names>Y.</given-names>
</name>
</person-group> (<year>2004</year>). <article-title>Experimental investigations of polypropylene and poly(vinyl chloride) composites filled with plerospheres</article-title>. <source>J. Appl. Polym. Sci.</source> <volume>92</volume>, <fpage>126</fpage>&#x2013;<lpage>131</lpage>. <pub-id pub-id-type="doi">10.1002/app.13667</pub-id>
</citation>
</ref>
<ref id="B77">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Wang</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Wang</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Ye</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Ren</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Xu</surname>
<given-names>C.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Characterization and thermal properties of a shape-stable Na2CO3-K2CO3/coal fly ash/expanded graphite composite phase change materials for high-temperature thermal energy storage</article-title>. <source>J. Energy Storage</source> <volume>33</volume>, <fpage>102123</fpage>. <pub-id pub-id-type="doi">10.1016/j.est.2020.102123</pub-id>
</citation>
</ref>
<ref id="B78">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Wrona</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Zukowski</surname>
<given-names>W.</given-names>
</name>
<name>
<surname>Bradlo</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Czupryn&#x15b;ki</surname>
<given-names>P.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Recovery of cenospheres and fine fraction from coal fly ash by a novel dry separation method</article-title>. <source>Energies (Basel)</source> <volume>13</volume>, <fpage>3576</fpage>. <pub-id pub-id-type="doi">10.3390/en13143576</pub-id>
</citation>
</ref>
<ref id="B79">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Xue</surname>
<given-names>Q. F.</given-names>
</name>
<name>
<surname>Lu</surname>
<given-names>S. G.</given-names>
</name>
</person-group> (<year>2008</year>). <article-title>Microstructure of ferrospheres in fly ashes: SEM, EDX and ESEM analysis</article-title>. <source>J. Zhejiang Univ. Sci. A</source> <volume>9</volume>, <fpage>1595</fpage>&#x2013;<lpage>1600</lpage>. <pub-id pub-id-type="doi">10.1631/jzus.A0820051</pub-id>
</citation>
</ref>
<ref id="B80">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Fulekar</surname>
<given-names>M. H.</given-names>
</name>
</person-group> (<year>2014</year>). <article-title>Isolation and charcterization of iron nanoparticles from coal fly ash from gandhinagar (Gujarat) thermal power plant (A mechanical method of isolation)</article-title>. <source>Int. J. Eng. Res.</source> <volume>3</volume>. <pub-id pub-id-type="doi">10.17577/IJERTV3IS060628</pub-id>
</citation>
</ref>
<ref id="B81">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Fulekar</surname>
<given-names>M. H.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Green synthesis and characterization of amorphous silica nanoparticles from fly ash</article-title>. <source>Mater. Today Proc.</source> <volume>18</volume>, <fpage>4351</fpage>&#x2013;<lpage>4359</lpage>. <pub-id pub-id-type="doi">10.1016/j.matpr.2019.07.395</pub-id>
</citation>
</ref>
<ref id="B82">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Fulekar</surname>
<given-names>M. H.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Advances in methods for recovery of ferrous, alumina, and silica nanoparticles from fly ashwaste</article-title>. <source>Ceramics</source> <volume>3</volume>, <fpage>384</fpage>&#x2013;<lpage>420</lpage>. <pub-id pub-id-type="doi">10.3390/ceramics3030034</pub-id>
</citation>
</ref>
<ref id="B83">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Pandita</surname>
<given-names>P. R.</given-names>
</name>
</person-group> (<year>2019</year>). &#x201c;<article-title>Fly ash properties and their applications as a soil ameliorant</article-title>,&#x201d; in <source>Amelioration technology for Soil sustainability</source>. Editor <person-group person-group-type="editor">
<name>
<surname>Rathoure</surname>
<given-names>A. K.</given-names>
</name>
</person-group> (<publisher-loc>Hershey, PA, USA</publisher-loc>: <publisher-name>IGI Global</publisher-name>), <fpage>59</fpage>&#x2013;<lpage>89</lpage>. <pub-id pub-id-type="doi">10.4018/978-1-5225-7940-3.ch005</pub-id>
</citation>
</ref>
<ref id="B84">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Choudhary</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Khan</surname>
<given-names>S. H.</given-names>
</name>
<name>
<surname>Malik</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Inwati</surname>
<given-names>G. K.</given-names>
</name>
<name>
<surname>Suriyaprabha</surname>
<given-names>R.</given-names>
</name>
<etal/>
</person-group> (<year>2020a</year>). &#x201c;<article-title>Synthesis and characterisation of nano-biosorbents and their applications for waste water treatment</article-title>,&#x201d; in <source>Handbook of research on emerging developments and environmental impacts of ecological chemistry</source>. (<publisher-loc>Hershey, PA</publisher-loc>: <publisher-name>IGI Global</publisher-name>), <fpage>252</fpage>&#x2013;<lpage>290</lpage>. <pub-id pub-id-type="doi">10.4018/978-1-7998-1241-8.ch012</pub-id>
</citation>
</ref>
<ref id="B85">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Saxena</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Lal</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Gnanamoorthy</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Choudhary</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Singh</surname>
<given-names>B.</given-names>
</name>
<etal/>
</person-group> (<year>2020b</year>). <article-title>Synthesis and characterization of mullites from silicoaluminous fly ash waste</article-title>. <source>Int. J. Appl. Nanotechnol. Res.</source> <volume>5</volume>, <fpage>10</fpage>&#x2013;<lpage>25</lpage>. <pub-id pub-id-type="doi">10.4018/ijanr.20200101.oa2</pub-id>
</citation>
</ref>
<ref id="B86">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Gnanamoorthy</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Cabral-Pinto</surname>
<given-names>M. M. S.</given-names>
</name>
<name>
<surname>Alam</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Ahamed</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Gupta</surname>
<given-names>N.</given-names>
</name>
<etal/>
</person-group> (<year>2021a</year>). <article-title>Variations and similarities in structural, chemical, and elemental properties on the ashes derived from the coal due to their combustion in open and controlled manner</article-title>. <source>Environ. Sci. Pollut. Res.</source> <volume>28</volume>, <fpage>32609</fpage>&#x2013;<lpage>32625</lpage>. <pub-id pub-id-type="doi">10.1007/s11356-021-12989-5</pub-id>
</citation>
</ref>
<ref id="B87">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>K. K.</given-names>
</name>
<name>
<surname>Tirth</surname>
<given-names>V.</given-names>
</name>
<name>
<surname>Jangid</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Gnanamoorthy</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Choudhary</surname>
<given-names>N.</given-names>
</name>
<etal/>
</person-group> (<year>2021b</year>). <article-title>Recent advances in methods for recovery of cenospheres from fly ash and their emerging applications in ceramics, composites, polymers and environmental cleanup</article-title>. <source>Cryst. (Basel)</source> <volume>11</volume>, <fpage>1067</fpage>. <pub-id pub-id-type="doi">10.3390/cryst11091067</pub-id>
</citation>
</ref>
<ref id="B88">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Gacem</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Choudhary</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Rai</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Kumar</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Yadav</surname>
<given-names>K. K.</given-names>
</name>
<etal/>
</person-group> (<year>2022a</year>). <article-title>Status of coal-based thermal power plants, coal fly ash production, utilization in India and their emerging applications</article-title>. <source>Minerals</source> <volume>12</volume>, <fpage>1503</fpage>. <pub-id pub-id-type="doi">10.3390/min12121503</pub-id>
</citation>
</ref>
<ref id="B89">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Inwati</surname>
<given-names>G. K.</given-names>
</name>
<name>
<surname>Ali</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Gnanamoorthy</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Bera</surname>
<given-names>S. P.</given-names>
</name>
<name>
<surname>Khan</surname>
<given-names>S. H.</given-names>
</name>
<etal/>
</person-group> (<year>2022b</year>). <article-title>Remediation of azure A dye from aqueous solution by using surface-modified coal fly ash extracted ferrospheres by mineral acids and toxicity assessment</article-title>. <source>Adsorpt. Sci. Technol.</source> <volume>2022</volume>, <fpage>1</fpage>&#x2013;<lpage>14</lpage>. <pub-id pub-id-type="doi">10.1155/2022/7012889</pub-id>
</citation>
</ref>
<ref id="B90">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Amari</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Gacem</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Elboughdiri</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Eltayeb</surname>
<given-names>L. B.</given-names>
</name>
<name>
<surname>Fulekar</surname>
<given-names>M. H.</given-names>
</name>
</person-group> (<year>2023a</year>). <article-title>Treatment of fly-ash-contaminated wastewater loaded with heavy metals by using fly-ash-synthesized iron oxide nanoparticles</article-title>. <source>WaterSwitzerl.</source> <volume>15</volume>, <fpage>908</fpage>. <pub-id pub-id-type="doi">10.3390/w15050908</pub-id>
</citation>
</ref>
<ref id="B91">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V. K.</given-names>
</name>
<name>
<surname>Amari</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Wanale</surname>
<given-names>S. G.</given-names>
</name>
<name>
<surname>Osman</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Fulekar</surname>
<given-names>M. H.</given-names>
</name>
</person-group> (<year>2023b</year>). <article-title>Synthesis of floral-shaped nanosilica from coal fly ash and its application for the remediation of heavy metals from fly ash aqueous solutions</article-title>. <source>Sustainability</source> <volume>15</volume>, <fpage>2612</fpage>. <pub-id pub-id-type="doi">10.3390/su15032612</pub-id>
</citation>
</ref>
<ref id="B92">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname>
<given-names>V.</given-names>
</name>
</person-group> (<year>2019</year>). <source>Nano-based approaches techniques and method development for separation of ferrous alumina and silica from waste fly ash</source>.</citation>
</ref>
<ref id="B93">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yao</surname>
<given-names>Z. T.</given-names>
</name>
<name>
<surname>Xia</surname>
<given-names>M. S.</given-names>
</name>
<name>
<surname>Sarker</surname>
<given-names>P. K.</given-names>
</name>
<name>
<surname>Chen</surname>
<given-names>T.</given-names>
</name>
</person-group> (<year>2014</year>). <article-title>A review of the alumina recovery from coal fly ash, with a focus in China</article-title>. <source>Fuel</source> <volume>120</volume>, <fpage>74</fpage>&#x2013;<lpage>85</lpage>. <pub-id pub-id-type="doi">10.1016/j.fuel.2013.12.003</pub-id>
</citation>
</ref>
<ref id="B94">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yoon</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Park</surname>
<given-names>I.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Micropore structures in cenosphere-containing cementitious materials using micro-CT</article-title>. <source>Adv. Mater. Sci. Eng.</source> <volume>2017</volume>, <fpage>1</fpage>&#x2013;<lpage>10</lpage>. <pub-id pub-id-type="doi">10.1155/2017/3892683</pub-id>
</citation>
</ref>
<ref id="B95">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yoriya</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Tepsri</surname>
<given-names>P.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Separation process and microstructure-chemical composition relationship of cenospheres from lignite fly ash produced from coal-fired power plant in Thailand</article-title>. <source>Appl. Sci. Switz.</source> <volume>10</volume>, <fpage>5512</fpage>. <pub-id pub-id-type="doi">10.3390/app10165512</pub-id>
</citation>
</ref>
<ref id="B96">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yoriya</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Tepsri</surname>
<given-names>P.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Crystal growth on cenospheres from high-calcium fly ash</article-title>. <source>Cryst. (Basel)</source> <volume>11</volume>. <pub-id pub-id-type="doi">10.3390/cryst11080919</pub-id>
</citation>
</ref>
<ref id="B97">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yoriya</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Intana</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Tepsri</surname>
<given-names>P.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Separation of cenospheres from lignite fly ash using acetone-water mixture</article-title>. <source>Appl. Sci. Switz.</source> <volume>9</volume>, <fpage>3792</fpage>. <pub-id pub-id-type="doi">10.3390/app9183792</pub-id>
</citation>
</ref>
<ref id="B98">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Zhao</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Sun</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Bai</surname>
<given-names>X.</given-names>
</name>
<name>
<surname>Zheng</surname>
<given-names>C.</given-names>
</name>
</person-group> (<year>2006</year>). <article-title>Mineralogy, chemical composition, and microstructure of ferrospheres in fly ashes from coal combustion</article-title>. <source>Energy &#x26; Fuels</source> <volume>20</volume>, <fpage>1490</fpage>&#x2013;<lpage>1497</lpage>. <pub-id pub-id-type="doi">10.1021/ef060008f</pub-id>
</citation>
</ref>
<ref id="B99">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Zierold</surname>
<given-names>K. M.</given-names>
</name>
<name>
<surname>Odoh</surname>
<given-names>C.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>A review on fly ash from coal-fired power plants: Chemical composition, regulations, and health evidence</article-title>. <source>Rev. Environ. Health</source> <volume>35</volume>, <fpage>401</fpage>&#x2013;<lpage>418</lpage>. <pub-id pub-id-type="doi">10.1515/reveh-2019-0039</pub-id>
</citation>
</ref>
<ref id="B100">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>&#x17b;yrkowski</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Neto</surname>
<given-names>R. C.</given-names>
</name>
<name>
<surname>Santos</surname>
<given-names>L. F.</given-names>
</name>
<name>
<surname>Witkowski</surname>
<given-names>K.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Characterization of fly-ash cenospheres from coal-fired power plant unit</article-title>. <source>Fuel</source> <volume>174</volume>, <fpage>49</fpage>&#x2013;<lpage>53</lpage>. <pub-id pub-id-type="doi">10.1016/j.fuel.2016.01.061</pub-id>
</citation>
</ref>
</ref-list>
</back>
</article>