AUTHOR=Samuel Isaac A. , Toyin Daudu Afah , Somefun Tobiloba E. , Awelewa Ayokunle A. , Abba-Aliyu Shehu 

TITLE=Evaluation and improvement of power quality of distribution network: a case study of Covenant University, Ota

JOURNAL=Frontiers in Energy Efficiency

VOLUME=Volume 2 - 2024

YEAR=2025

URL=https://www.frontiersin.org/journals/energy-efficiency/articles/10.3389/fenef.2024.1389622

DOI=10.3389/fenef.2024.1389622

ISSN=2813-6799

ABSTRACT=Power quality is a global concern, particularly as electronic devices are increasingly supporting modern economies. This research evaluates and proposes improvements for power quality of the distribution network at Covenant University, Ota, Nigeria, where electrical equipment usage contributes to power quality challenges. Measurements and evaluations were carried out in three stages: first, measuring power quality at five campus powerhouses using a Circutor aR6 power analyzer; second, assessing these measurements with Power Vision software; third, simulating the evaluated network with NEPLAN software. The study was conducted during an active school session, with measurements taken at 500 kVA, 11 kV/415 V/230 V on the outgoing circuits for each transformer. The results were benchmarked against IEEE power quality standards and identified issues such as harmonics, total harmonic distortion (THD), overload, and a lagging power factor. The proposed improvements, derived from NEPLAN simulation, included active harmonic filters to reduce harmonics, a shunt capacitor for power factor correction, and load sharing for managing transformer overloads. Simulation results demonstrated that THD was significantly reduced across all powerhouses: CDS from 7.28% to 0.91%, EIE from 10.52% to 3.54%, CST from 16.03% to 0.58%, the Library from 11.92% to 0.12%, and the Male Hostel from 16.71% to 0.24%. These adjustments enhanced THD within specified limits. Additionally, the shunt capacitor increased the power factor to 0.96 from −0.96. These enhancements are expected to extend equipment life, reduce heat loss, and lower utility costs.