Original Research

Published on 10 Jun 2024

On the thermal performance of radiative stagnation-point hybrid nanofluid flow across a wedge with heat source/sink effects and sensitivity analysis

in Carbon-Based Materials

Anomitra Chakraborty
Rania Saadeh
Ahmad Qazza
Naser Zomot
Pranitha Janapatla
Umair Khan
Mohammad Qraywi
Taseer Muhammad

Frontiers in Materials

doi 10.3389/fmats.2024.1391377

537 views

Original Research

Published on 10 Jun 2024

Flexural behaviour of damaged concrete T-beams reinforced with ultra-high performance concrete filling

in Structural Materials

Shuai Huang
Yonglei Xi
Xin Li
Pengfei Men
Gangan Wu

Frontiers in Materials

doi 10.3389/fmats.2024.1410016

484 views

Original Research

Accepted on 07 Jun 2024

Parametric analysis of novelInfluence of wood core in sandwiched composite submersible pressure hulls to investigate the different mechanical parameters

in Polymeric and Composite Materials

Hafiz Muhammad Waqas
Hafiz Muhammad Waqas
Syed Murawat Abbas Naqvi
Umair MUNIR
Sohaib Z. Khan
Elsayed Fathallah
Mahmoud Helal

Frontiers in Materials

doi 10.3389/fmats.2024.1399559

112 views

Original Research

Published on 07 Jun 2024

Conduction mechanisms in a planar nanocomposite resistive switching device based on cluster-assembled Au/ZrOx films

in Smart Materials

Davide Cipollini
Filippo Profumo
Lambert Schomaker
Paolo Milani
Francesca Borghi

Frontiers in Materials

doi 10.3389/fmats.2024.1385792

552 views

Original Research

Published on 06 Jun 2024

Research on the resistance of cement-based materials to sulfate attack based on MICP technology

in Structural Materials

Yong Zhang
Geng Peng
Ai Li
Xinrui Yang
Shuaidi Kong
Yutong An
Junhao Tian
Xupeng Sun

Frontiers in Materials

doi 10.3389/fmats.2024.1420131

469 views

Original Research

Published on 06 Jun 2024

Machine learning-based prediction of compressive strength in circular FRP-confined concrete columns

in Structural Materials

Ruifu Cui
Huihui Yang
Jiehong Li
Yao Xiao
Guowen Yao
Yang Yu

Frontiers in Materials

doi 10.3389/fmats.2024.1408670

423 views

Original Research

Published on 05 Jun 2024

Effect of cyclic compression on the micromechanical properties of a Zr-based metallic glass

in Mechanics of Materials

Anwei Wang
Yang Wang
Hongwu Zhu
Hanxiao Sun
Yansen Li

Frontiers in Materials

doi 10.3389/fmats.2024.1401094

411 views

Original Research

Published on 04 Jun 2024

Investigating the synergistic anti-aging effects of Sasobit and recycled engine oil in styrene-butadiene rubber modified asphalt

in Structural Materials

Zhen Li
Zhen Lu
Xiajun Liu
Jianxiang Wang

Frontiers in Materials

doi 10.3389/fmats.2024.1412094

310 views

Editorial

Published on 04 Jun 2024

Editorial: Advanced materials and technique for structural monitoring, analysis, and control

in Smart Materials

Chun-Xu Qu
Liang Ren
Yunlai Zhou
Qian Feng
Sadegh Shams

Frontiers in Materials

doi 10.3389/fmats.2024.1408284

497 views

Original Research

Published on 04 Jun 2024

UV photodegradation of methylene blue using microstructural carbon materials derived from citrullus colocynthis

in Carbon-Based Materials

Muhammad Ali Bhatti
Elmuez Dawi
Aneela Tahira
Ahmed Ali Hulio
Imran Ali Halepoto
Sajjad Ali Chang
Abdul Ghaffar Solangi
Ayman Nafady
Matteo Tonezzer
Abd Al Karim Haj Ismail

Frontiers in Materials

doi 10.3389/fmats.2024.1407485

730 views

Review

Published on 03 Jun 2024

PHBV cycle of life using waste as a starting point: from production to recyclability

in Polymeric and Composite Materials

Salvador García-Chumillas
Teresa Guerrero-Murcia
María Nicolás-Liza
Fuensanta Monzó
Alexandra Simica
Lorena Simó-Cabrera
Rosa María Martínez-Espinosa

Frontiers in Materials

doi 10.3389/fmats.2024.1405483

760 views

Original Research

Published on 03 Jun 2024

Preparation of kartogenin-loaded PLGA microspheres and a study of their drug release profiles

in Biomaterials and Bio-Inspired Materials

Hyun-Kyung Chang
Yong-Gon Koh
Hyoung-Taek Hong
Kyoung-Tak Kang

Frontiers in Materials

doi 10.3389/fmats.2024.1364828

356 views

Original Research

Published on 03 Jun 2024

Optimization of the position of TaOx:N-based barrier layer in TaOx RRAM devices

in Semiconducting Materials and Devices

Pramod Ravindra
Maximilian Liehr
Rajas Mathkari
Karsten Beckmann
Natalya Tokranova
Nathaniel Cady

Frontiers in Materials

doi 10.3389/fmats.2024.1343076

488 views

Review

Published on 03 Jun 2024

MPX3 van der Waals magnets under pressure (M = Mn, Ni, V, Fe, Co, Cd; X = S, Se)

in Semiconducting Materials and Devices

Takahiro Matsuoka
Heung-Sik Kim
Subhasis Samanta
Janice L. Musfeldt
David G. Mandrus

Frontiers in Materials

doi 10.3389/fmats.2024.1362744

738 views

Original Research

Published on 31 May 2024

Formulation and structural insight of biocompatible microemulsion for enhanced release profile of anticancer methotrexate

in Colloidal Materials and Interfaces

Muhammad Yasir Siddique
Sehrish Zafar
Linta Rizwan
Muhammad Atif Saleem
Sajjad Haider
Waqar Azeem
Kamran Alam
Yasir Iqbal
Sajjad Hussain Sumrra
Muhammad Faizan Nazar

Frontiers in Materials

doi 10.3389/fmats.2024.1409310

498 views

Original Research

Accepted on 30 May 2024

Investigation on swelling-shrinkage behavior of expansive soil with stone chop incorporation

in Mechanics of Materials

Yunye Deng

Frontiers in Materials

doi 10.3389/fmats.2024.1385148

Navigation group

Articles

On the thermal performance of radiative stagnation-point hybrid nanofluid flow across a wedge with heat source/sink effects and sensitivity analysis

Flexural behaviour of damaged concrete T-beams reinforced with ultra-high performance concrete filling

Parametric analysis of novelInfluence of wood core in sandwiched composite submersible pressure hulls to investigate the different mechanical parameters

Conduction mechanisms in a planar nanocomposite resistive switching device based on cluster-assembled Au/ZrOx films

Research on the resistance of cement-based materials to sulfate attack based on MICP technology

Machine learning-based prediction of compressive strength in circular FRP-confined concrete columns

Effect of cyclic compression on the micromechanical properties of a Zr-based metallic glass

Investigating the synergistic anti-aging effects of Sasobit and recycled engine oil in styrene-butadiene rubber modified asphalt

Editorial: Advanced materials and technique for structural monitoring, analysis, and control

UV photodegradation of methylene blue using microstructural carbon materials derived from citrullus colocynthis

PHBV cycle of life using waste as a starting point: from production to recyclability

Preparation of kartogenin-loaded PLGA microspheres and a study of their drug release profiles

Optimization of the position of TaOx:N-based barrier layer in TaOx RRAM devices

MPX3 van der Waals magnets under pressure (M = Mn, Ni, V, Fe, Co, Cd; X = S, Se)

Formulation and structural insight of biocompatible microemulsion for enhanced release profile of anticancer methotrexate

Investigation on swelling-shrinkage behavior of expansive soil with stone chop incorporation