AUTHOR=Qingqiu Cao , Shengwei Zhang , Tao Li , Gaixia Zhai , Hongfang Yuan 

TITLE=Discrete element modelling and mechanical properties and cutting experiments of Caragana korshinskii Kom. stems

JOURNAL=Frontiers in Plant Science

VOLUME=Volume 15 - 2024

YEAR=2024

URL=https://www.frontiersin.org/journals/plant-science/articles/10.3389/fpls.2024.1457243

DOI=10.3389/fpls.2024.1457243

ISSN=1664-462X

ABSTRACT=The forage crop Caragana korshinskii Kom. is of high quality, and the biomechanical properties of its plant system are of great significance for the development of harvesting equipment and the comprehensive utilisation of crop resources. However, the extant research on the biomechanical properties of Caragana korshinskii Kom. is inadequate to enhance and refine the theoretical techniques for mechanised harvesting. In this study, we established a discrete element model of CKS based on the Hertz-Mindlin bonding contact model. By combining physical experiments and numerical simulations, we calibrated and validated the intrinsic and contact parameters. The Plackett-Burman design test was employed to identify the significant factors influencing bending force, and the optimal parameter combination for these factors was determined through response surface analysis. When the shear stiffness per unit area is 3.56×10 9 Pa, the bonded disk scale is 0.93 mm, the normal stiffness per unit area is 9.68×10 9 Pa, the normal strength is 5.62×10 7 Pa, the shear strength is 4.27×10 7 Pa, the discrete element numerical simulation results for three-point bending, radial compression, axial tension, and shear fracture exhibited a maximum failure force error of 3.32%, 4.37%, 4.87% and 3.74% in comparison to the physical experiments. In the cutting experiments, a smaller radial angle between the tool edge and the stem resulted in less damage to the cutting section, which was beneficial for the smoothness of the stubble after harvesting and the subsequent growth of the stem. The discrepancy in cutting force between the physical and numerical simulations was 3.89%, and the F-x (force versus displacement) trend was found to be consistent. The multi-angle experimental validation demonstrated that the discrete element model of CKS is an accurate representation of the real biomechanical properties of CKS. The findings offer valuable insights into the mechanisms underlying crop-machine interactions.