Abstract
Accurate yield prediction for major grain and oilseed crops, including soybean, corn, wheat, and rice, is essential for food-security assessment and precision field management. This study presents a structured integrative review of UAV-based crop yield prediction and follows PRISMA-guided procedures for literature search, screening, and evidence synthesis. Seventy peer-reviewed studies published between 2018 and 2025 were synthesized within a “Data–Ground Truth–Model–Decision” framework. Beyond summarizing UAV platforms, sensor configurations, feature-engineering strategies, and model architectures, the review explicitly distinguishes among microplot, field, and regional prediction scales, and evaluates the characteristics and limitations of yield-label acquisition methods, including manual harvest, plot-combine harvest, and combine yield-monitor data. Existing evidence indicates that the reliability of UAV-based yield prediction depends not only on optimal image acquisition windows, multi-source feature fusion, and model architecture, but also on scale-consistent yield labels, spatially aware validation strategies, and clearly defined model outputs, such as plot-level scalar yield, field-scale yield maps, and regional yield estimates. Major bottlenecks include scale mismatch between UAV imagery and yield labels, error propagation during yield-map generation, limited cross-year and cross-region transferability, weak causal interpretability, and difficulties in deploying models under complex operational field conditions. Future research should emphasize scale-explicit benchmark datasets, quality-controlled ground-truth yield acquisition, UAV–satellite–ground data fusion, spatiotemporal deep learning, and edge–cloud collaborative systems that can translate prediction outputs into agronomic decisions. This review provides a practical pathway for developing robust, interpretable, and deployable UAV-based yield prediction systems for major grain and oilseed crops.
1 Introduction
As the global population continues to grow and concerns about food security intensify (), enhancing the accuracy, timeliness, and precision of yield predictions for major crops has emerged as a critical challenge in advancing precision agriculture (; ).Traditional methods for yield prediction, which primarily depend on ground sampling and statistical models, are constrained by significant limitations in monitoring scope, data resolution, and the ability to perform spatiotemporal dynamic analysis. Recently, Unmanned Aerial Vehicle (UAV) technology has been rapidly adopted in agricultural remote sensing, valued for its high spatiotemporal resolution, cost-effectiveness, and flexible deployment (; ; ). This has opened up a new technological pathway for predicting crop yields.
Equipped with a diverse array of sensors (; ; ), such as visible light, multispectral, thermal infrared, and hyperspectral cameras—UAVs are capable of acquiring extensive physiological and environmental data from crops at critical growth stages or across multiple time points (; ; ; ).From the high-resolution spectral, thermal infrared, and RGB images collected, key information, including vegetation indices (; ; )and texture features (), can be extracted to effectively characterize crop growth status, population structure, and canopy conditions (; ).Simultaneously, the emergence of machine learning and deep learning methods provides powerful tools for efficient feature extraction and yield prediction from the comprehensive data provided by UAV remote sensing, thereby further improving prediction accuracy ().
Although substantial research has investigated UAV remote sensing for yield prediction in major staple crops such as soybean, corn, wheat, and rice (; ; ), the central bottleneck in this field is no longer confined to sensor selection or algorithmic performance. Yield prediction is essentially a supervised spatial modeling problem; therefore, model outputs can be properly interpreted only when the spatial support of UAV-derived features, the method used to obtain ground-truth yield, and the intended prediction target are explicitly aligned. For example, a plot-level model trained using destructive harvest data cannot be assumed to generate reliable sub-field yield prescription maps, whereas a model trained using combine yield-monitor data must account for measurement lag, swath-width uncertainty, moisture correction, and geolocation errors (A ; ). Accordingly, this review extends the original “Data–Model–Decision” perspective by incorporating two critical components that are often treated implicitly in the existing literature: spatial scale definition and ground-truth yield acquisition. This expanded framework provides a more comprehensive “Data–Ground Truth–Model–Decision” perspective for evaluating the reliability and practical applicability of UAV-based crop yield prediction.
From a global research perspective, studies on UAV-based crop yield prediction are rapidly expanding, with notable innovations in multimodal data fusion, temporal feature mining, and the deployment of lightweight models. However, research fragmentation and a lack of an engineering-oriented approach have resulted in many advanced models being confined to the experimental validation stage, preventing the establishment of reproducible and scalable technical standards. Consequently, there is a pressing need to systematically review the existing literature, delineate the primary trajectory of technological advancement, pinpoint key bottlenecks, and bridge the gap between research and practical application.
To address these issues, the present manuscript is positioned as a structured integrative review based on systematic search and transparent screening procedures. It synthesizes 70 representative peer-reviewed studies published between 2018 and 2025 and follows a revised conceptual pathway from data acquisition, ground-truth construction, feature processing, and model input–output mapping to model validation and decision translation. The year 2018 was selected as the starting point because, after 2017, low-cost UAV multispectral/RGB platforms, high-resolution field phenotyping workflows, and deep-learning techniques expanded rapidly in crop monitoring, shifting UAV-based yield prediction from isolated image acquisition toward multi-source data fusion and intelligent modeling. The crop scope is limited to soybean, corn, wheat, and rice because these four major grain crops collectively constitute the dominant evidence base in current UAV-based yield-prediction studies and represent contrasting agronomic application scenarios, including breeding microplots, commercial row-crop fields, and regional grain-production systems. Therefore, this review does not aim to enumerate all possible agricultural applications of UAVs. Instead, it critically evaluates how spatial scale, yield labels, feature representations, model architectures, and deployment constraints jointly determine whether UAV-based crop yield prediction can move beyond experimental validation toward field-ready decision support for agronomic management.
The literature search was restricted to studies published between 2018 and 2025 because this period captures a clear methodological transition in UAV-based crop monitoring, from isolated image acquisition and single vegetation-index regression toward high-resolution phenotyping, multi-source feature fusion, and machine-learning/deep-learning modeling supported by low-cost RGB/multispectral UAV platforms (; ).The crop scope was limited to soybean, corn, wheat, and rice based on their relevance to global food, feed, and oilseed security and on the availability of a sufficiently developed UAV yield-prediction evidence base. Corn, wheat, and rice are the dominant global cereal crops, together accounting for 91% of total global cereal production in 2023 FAO (FAO Agricultural production statistics 2010–2023). Although soybean is not a cereal crop, it is a globally important oilseed and plant-protein crop with a central role in edible oil, feed protein, and oilseed value chains; soybean meal dominates global protein-meal production from oilseed crush and accounts for more than two-thirds of world protein-meal production OECD-FAO (OECD-FAO Agricultural Outlook 2025–2034, Oilseeds and oilseed products). Therefore, the term “major crops” in this review is operationally defined as representative major grain and oilseed crops with strong relevance to global food, feed, and oilseed systems, namely soybean, corn, wheat, and rice.
2 Review protocol
The present review was designed as a structured integrative review following PRISMA-guided procedures for literature search, screening, and reporting. Because the included studies varied substantially in crop species, UAV sensors, spatial support, ground-truth yield measurement, model inputs, output targets, and validation schemes, the evidence was synthesized through a structured integrative framework. This approach enabled heterogeneous methodological evidence to be organized around data acquisition, yield-label construction, feature processing, model design, validation, and decision-oriented application (; ). The PICOS definition and review scope used in this structured integrative review are summarized in Table 1.
Table 1
| PICOS element | Definition used in this review | Operational implication for screening and synthesis |
|---|---|---|
| Population/Problem | Field-based yield prediction for soybean, corn, wheat, and rice under UAV remote sensing scenarios. | Restricts the review to major grain and oilseed crops with published UAV yield-prediction evidence. |
| Intervention/Index method | UAV-derived RGB, multispectral, hyperspectral, thermal, LiDAR, structural, texture, temporal, or fused features, with or without ancillary weather/soil data. | Focuses on UAV-enabled data streams rather than satellite-only or ground-sampling-only studies. |
| Comparator/Context | Differences among sensor types, flight periods, feature sets, model families, spatial scales, and validation strategies. | Supports critical comparison rather than a single pooled effect size. |
| Outcomes | Yield prediction accuracy (R², RMSE, RRMSE/NRMSE), output form (plot scalar, field map, regional estimate), transferability, interpretability, and deployability. | Requires each study to report a measurable yield-prediction output or sufficient methodological detail. |
| Study design | Peer-reviewed empirical studies and peer-reviewed conference or methodological studies that provided sufficient information on UAV data, ground-truth yield acquisition, model construction, validation strategy, and yield-prediction output. | Excludes satellite-only, non-peer-reviewed, inaccessible, or methodologically insufficient records. |
PICOS definition and review scope used in this structured integrative review.
2.1 Search strategy
The literature search was conducted using Google Scholar and Web of Science as the core retrieval platforms. The final search was completed on June 28, 2025. Searches were limited to English-language peer-reviewed studies published between 2018 and 2025. In Web of Science, the search strings were applied to topic fields, including title, abstract, author keywords, and Keywords Plus. In Google Scholar, the first 200 results for each core and supplementary search string were screened, and records were retained only when the title, abstract, or full text was directly related to UAV-based yield prediction in soybean, corn, wheat, or rice. This period was selected to capture the transition of UAV-based crop yield prediction from single-index regression toward multi-source feature fusion and machine-learning/deep-learning modeling. PRISMA-guided procedures were used to improve the transparency of record identification and study selection. The structured integrative-review approach was adopted to synthesize heterogeneous methodological evidence across data acquisition, yield-label construction, feature processing, model design, validation, and decision-oriented application (; ).
The core query was as follows: (“UAV” OR “drone” OR “unmanned aerial vehicle” OR “UAS”) AND (“crop yield prediction” OR “yield estimation” OR “grain yield prediction” OR “yield mapping”) AND (“soybean” OR “maize” OR “corn” OR “wheat” OR “rice”). To minimize potential bias arising from database coverage and terminology variation, supplementary searches were performed by combining sensor- and model-related terms with crop- and yield-related terms, including (“multispectral” OR “hyperspectral” OR “RGB” OR “LiDAR” OR “thermal”) AND (“machine learning” OR “deep learning” OR “CNN” OR “random forest”) AND (“yield”). In addition, backward and forward citation chasing was conducted to identify relevant studies that were not retrieved by the core search strings but met the predefined inclusion criteria. This strategy was used to improve the completeness of the literature retrieval, reduce terminology-related retrieval bias, and minimize the risk of missing eligible peer-reviewed studies.
2.2 Selection process
The study selection process consisted of preliminary screening, full-text assessment, and citation chasing. During preliminary screening, titles, abstracts, and keywords were examined to exclude records that were clearly unrelated to UAV-based crop yield prediction or lacked substantial methodological content. The remaining studies were then assessed through full-text reading. Studies that did not meet the inclusion criteria, lacked sufficient information on UAV data, yield labels, model construction, or validation, or did not provide a measurable yield-prediction output were excluded. During citation chasing, the reference lists of eligible and highly relevant studies were examined, and targeted searches were conducted in Google Scholar to identify additional studies that may have been missed by the database search.
Full-text screening and evidence coding were conducted using a predefined methodological adequacy checklist and a structured data-extraction form tailored to UAV-based crop yield prediction, with emphasis on whether each study clearly reported UAV data sources, ground-truth yield acquisition, model inputs, output targets, validation strategy, accuracy metrics, and major limitations. For each eligible study, the following information was extracted and coded: crop species, spatial scale, UAV platform, sensor type, image acquisition stage, preprocessing workflow, ground-truth yield source, feature type, model family, output target, validation strategy, accuracy metrics, and limitation reporting. This coding structure was used to ensure that the synthesis did not remain a simple inventory of algorithms, but instead linked model performance to data source, yield-label quality, spatial scale, validation reliability, and intended application target. The inclusion and exclusion criteria used during full-text assessment are summarized in Table 2. Grey literature, including dissertations, commercial reports, technical reports, and non-peer-reviewed online materials, was excluded to improve methodological comparability and source reliability. This restriction may reduce heterogeneity but may also introduce publication bias, which was considered when interpreting the evidence base.
Table 2
| Criterion type | Criterion used in this review | Screening implication |
|---|---|---|
| Inclusion | The study focused on UAV-based crop yield prediction or yield estimation. | Ensures direct relevance to the review topic. |
| Inclusion | The crop included soybean, corn, wheat, or rice. | Matches the defined crop scope of this review. |
| Inclusion | UAV-derived data were used as a major input source. | Excludes satellite-only or ground-sampling-only studies. |
| Inclusion | The study reported a measurable yield-prediction output or provided sufficient methodological detail for interpretation. | Ensures that model performance and workflow information can be extracted. |
| Inclusion | The study was published in a peer-reviewed journal or peer-reviewed conference proceeding. | Improves the reliability and comparability of the included evidence. |
| Exclusion | The full text was inaccessible. | Prevents incomplete evidence extraction. |
| Exclusion | The study lacked key information on UAV data, yield labels, model construction, or validation strategy. | Excludes methodologically insufficient studies. |
| Exclusion | The study focused only on crop monitoring, disease detection, biomass estimation, or phenotyping without yield prediction. | Maintains the focus on yield-prediction studies. |
| Exclusion | The study used only satellite or ground-sampling data without UAV-derived inputs. | Maintains the UAV-based review scope. |
| Exclusion | The study was a non-peer-reviewed blog, commercial report, technical note, or other grey-literature source outside the defined review scope. | Reduces uncertainty from non-peer-reviewed evidence. |
Study selection criteria used for literature screening.
2.3 Literature synthesis
Using the search and screening strategy described above (Figure 1), 70 peer-reviewed studies were retained for detailed synthesis. Because these studies differed substantially in crop species, sensor configurations, spatial support, yield-label sources, model structures, and validation designs, the evidence was not statistically pooled. Instead, a structured synthesis was conducted around five key dimensions: spatial scale, ground-truth yield acquisition, data processing, model input–output mapping, and field-deployment bottlenecks. This approach was intended to move beyond a purely descriptive inventory of previous studies and to provide a critical, application-oriented interpretation of the evidence.
Figure 1
As shown in Figure 2, a concentrated attention on this topic is evident among core journals in the field of remote sensing. Since remote sensing technology is an important supporting technology for UAV crop yield prediction, such journals are highly specialized and have significant influence. They are therefore more likely to publish and disseminate studies on UAV-based crop yield prediction.
Figure 2
From the perspective of the countries where the authors are from, China (41.2%) and the United States (26.3%) dominate. This is primarily attributed to substantial research investments and policy support in agricultural remote sensing, UAV technology, and artificial intelligence in both countries, Moreover, the two countries have extensive agricultural application scenarios, which has led to more abundant research outputs in this area. Furthermore, the keyword word cloud in the abstract further indicates that the current core focus of the research is on Yield, Prediction, Crop, and UAV, suggesting that the integration of machine learning, deep learning, and UAV remote sensing technology for crop yield prediction has become a research hotspot in this field.
3 Literature analysis
3.1 Overview
After completion of the literature search and selection process, the selected studies were found to share a broadly similar technical chain but to differ substantially in spatial support and prediction targets. Therefore, UAV-based crop yield prediction should not be interpreted merely as a simple regression from image-derived features to yield values. Rather, it should be understood as a supervised modeling process that maps UAV observations to ground-truth yield labels within a defined spatial scale. Based on this understanding, the revised conceptual framework consists of five interlinked components: UAV data acquisition, image preprocessing and feature extraction, yield-label construction, model input–output mapping, and decision-level application. This scale-aware framework is used as the organizing basis for the subsequent analysis to avoid conflating prediction strategies at the microplot, field, and regional scales, because these scales differ fundamentally in data requirements, ground-truth sources, output forms, and validation risks.
As shown in Figure 3, UAV-based crop yield prediction involves a linked workflow from data acquisition and ground-truth yield construction to feature extraction, feature selection, model prediction, output generation, and decision application. At the microplot scale, UAV imagery is mainly used in breeding trials and treatment evaluation, where low-altitude flights provide high-resolution images and yield labels are commonly obtained from manual harvest or plot-combine harvest. At the field/farm scale, UAV-based prediction is more closely related to precision agriculture, where multi-temporal imagery, canopy features, and combine yield-monitor data can be used to generate field-scale yield maps or management zones. At the regional scale, UAV observations are generally used as high-resolution samples and are often integrated with satellite time series, weather/climate data, crop models, and statistical records for regional yield estimation and food-security assessment.
Figure 3
3.1.1 Spatial scale and prediction target definition
A major source of inconsistency in the UAV-based yield-prediction literature is the implicit mixing of spatial scales. At the microplot or quadrat scale, UAV imagery is typically paired with manual harvest or plot-combine measurements, and the model output is commonly a plot-level scalar yield used for breeding evaluation or treatment comparison. At the field or farm scale, UAV imagery is more often used to generate within-field yield maps or management zones, which requires calibration of combine yield-monitor data, moisture correction, coordinate alignment, and filtering of artifacts caused by harvester dynamics (; A ). At the regional scale, UAV observations are generally insufficient as a stand-alone data source for large-area yield prediction; instead, they are better used as high-resolution calibration or validation layers in combination with satellite remote sensing, meteorological data, and crop-model frameworks (; ). Therefore, separating these spatial scales is essential because model inputs, yield labels, validation methods, and practical decision targets are not interchangeable across scales.The differences among microplot, field, and regional prediction scales are summarized in Table 3 in terms of typical applications, UAV inputs, ground-truth yield sources, output targets, and major risks.
Table 3
| Scale | Typical application | UAV/ancillary inputs | Ground-truth yield source | Common output target | Key risk |
|---|---|---|---|---|---|
| Microplot | Breeding trials and experimental plots | Centimeter-level RGB, multispectral, hyperspectral, texture, or canopy-height features | Manual quadrat harvest or plot-combine harvest standardized to moisture content | Plot-level scalar yield or genotype/treatment ranking | Small sample size, edge effects, spatial leakage between adjacent plots |
| Field | Commercial precision agriculture and variable-rate management | UAV mosaics, multi-temporal indices, canopy structure, weather/soil layers | Combine yield-monitor points/maps or whole-field harvested yield | Within-field yield map, management-zone map, or field-average yield | Yield-monitor lag, swath-width and moisture errors, georeferencing mismatch, aggregation bias |
| Regional | Large production areas, policy, insurance, and food-security forecasting | UAV samples fused with satellite time series, meteorological data, crop models, and statistics | Survey statistics, harvester databases, field records, or calibrated crop-model outputs | Regional yield estimate or gridded yield surface | Upscaling uncertainty, domain shift across years/regions, sparse ground truth |
Spatial scales, ground-truth yield sources, output targets, and major risks in UAV-based crop yield prediction.
3.2 Data acquisition
Data acquisition is a fundamental step in the process of crop yield prediction using UAV remote sensing, playing a decisive role in the accuracy and reliability of predictions. The type of UAV directly affects the spatial scale of data acquisition and operational efficiency, while the type of sensors it carries determines the richness of the data obtained and its potential applications. Therefore, this section will discuss in detail the types of UAV platforms and their accompanying sensor types, aiming to analyze the characteristics and trends of data acquisition methods in current reviews.
3.2.1 Types of UAVs
UAV platforms used for crop yield prediction mainly include multi-rotor and fixed-wing systems (Table 4). Multi-rotor UAVs are the dominant choice in plot-based and small-area field experiments. They offer flexible flight, easy operation, low-altitude hovering, and stable image acquisition, which makes them suitable for high-resolution crop monitoring and repeated observations in limited field areas (; ). In breeding nurseries and precision-agriculture demonstration plots, flights at about 10–100 m can capture detailed canopy spectral, RGB texture, and structural information. Fixed-wing UAVs have longer endurance, higher flight speed, and wider coverage. They are more suitable for rapid monitoring of large fields or contiguous agricultural areas (). These platforms are often operated above 100 m to improve acquisition efficiency (; ). Their stricter take-off and landing requirements and lower maneuverability, however, limit their use in small plots or fragmented fields. Platform selection should therefore match the prediction scale, ground-truth yield acquisition strategy, and application scenario, rather than only reflect a trade-off between spatial resolution and operational efficiency.
Table 4
| UAV Type | Advantages | Disadvantages |
|---|---|---|
| Multi-rotor UAVs | - Vertical take-off and landing - Flexible hovering - High resolution - Low cost and easy maintenance - Close-range multi-angle collection | - Poor endurance (20 min -40min) - Only suitable for small-area plots - Not suitable for severe weather - Limited load-carrying capacity |
| Fixed-wing UAVs | - Relatively long flight range - Strong load-bearing capacity - Relatively fast speed - Strong endurance (1 h- 3 h) | - Restricted take-off and landing - Insufficient flexibility - Not suitable for small-area operations - Relatively high operation difficulty |
Advantages and disadvantages of multi-rotor UAV vs fixed-wing UAV in the field of agriculture.
A comprehensive literature analysis reveals that flight altitude exerts a significant influence on prediction accuracy. We systematically tallied the flight altitude schemes adopted by UAVs in the literature, as illustrated in Figure 4, and found that the majority of researchers employ flight altitude strategies ranging from 20 m to 100 m. It is generally believed that higher flight altitudes can improve operational efficiency and reduce flight costs, but they may also decrease image spatial resolution, affecting prediction accuracy. However, empirical studies have shown that this relationship is not simply negative. A study on wild blueberries found that among three flight altitudes—5 m, 15 m, and 30 m—the highest altitude of 30 m actually exhibited the best yield prediction performance. This suggests that flying at greater heights can effectively reduce image noise (such as shadows and soil background factors), highlighting the color and texture differences among different crops, thereby improving the accuracy of crop type identification (). In another study that estimated above-ground biomass of winter wheat using UAV RGB images and texture features, the optimal spatial resolution was found to be 0.5 m, which corresponds to a flight altitude of around 50 m. This height effectively balanced image detail and crop canopy texture information, reducing heterogeneity and background interference within the canopy, thus enhancing estimation accuracy (). Moreover, when there are multiple crop types and complex spatial structures, appropriately lowering the flight altitude to improve spatial resolution can allow for more accurate extraction of crop texture features, thereby improving classification results. However, there is an optimal threshold for this improvement within a certain range; excessively low flight altitudes may lead to reduced accuracy due to excessive detail interference (). Therefore, in UAV remote sensing for crop yield prediction, selecting the flight altitude requires a comprehensive consideration of crop type, spatial structure, and research objectives. Only by finding the optimal balance point between the efficiency advantage of high-altitude flight and the spatial detail advantage of medium and low-altitude flight can the optimal prediction effect be achieved.
Figure 4
3.2.2 Sensor types
In UAV-based crop yield prediction, sensors play a central role in determining the type, resolution, and reliability of image-derived information (Table 5). Current studies mainly employ spectral and RGB sensors, whereas the application of radar and thermal infrared sensors remains relatively scarce.
Table 5
| Sensor type | Wavelength range | Typical resolution | Advantages | Limitations |
|---|---|---|---|---|
| RGB | - Visible light (Red, Green, Blue) | - High (such as 1–5 cm/px) | - Low cost - Easy to operate | - Limited information, easily affected by lighting |
| Multispectral | - Visible light - Near - infrared - Red - edge and other additional bands | - Medium (such as 5–10 cm/px) | - Mature processing flow - Rich vegetation information - Can accurately quantitatively evaluate crop health status | - High price, requires precise radiometric calibration |
| Thermal Infrared | - 8 - 14 μm | - Relatively low(such as 10–20 cm/px) | - Directly reflects thermal characteristics - Conducive to water and stress assessment | - Low resolution - Greatly affected by the environment |
| Hyperspectral | - Dozens to hundreds ofnarrow bands (including visible light to short - wave infrared) | - Variable, usually low | - Extremely high spectral resolution, can identify microscopic differences in crops | - High equipment cost - Expensive equipment - Large data volume - Complex interpretation |
| LiDAR | - Near - infrared laser ranging (such as 905 nm or 1550 nm) | - High (point cloud density is adjustable) | - Active ranging, independent of lighting, can obtain high - precision three - dimensional structure | - High cost - Complex operation - Requires professional algorithms to process point cloud data |
Introduction to the sensors carried by the UAV, including the wavelength range, typical resolution, and advantages and limitations.
Multispectral sensors can accurately capture reflectance information of crops across multiple specific spectral bands, including red, green, blue, and near-infrared. Through in-depth analysis of this information, key indices such as the Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI) can be calculated (; ). Although the formulas for vegetation indices are fixed, variations may arise due to differences in band center and bandwidth; for instance, red light may be at 660 nm or 640 nm, leading to significant discrepancies in the same index. In a study that used the Normalized Difference Water Index (NDWI) to estimate corn canopy water content, researchers employed four different NDWI parameters, resulting in varying experimental outcomes ().
RGB sensors, known for their high accuracy, are mainly used to obtain color and texture information of crop canopies (). The color values of leaves of healthy crops are generally within a specific range. When affected by factors such as pests, diseases, or nutrient deficiencies their colors will change significantly. By analyzing characteristics such as color saturation and brightness, it is possible to effectively reflect the growth vitality and environmental stress of crops (; ). constructed an RGB model of canopy leaf color deviation distribution pattern, describing canopy color information from three aspects: leaf color depth, distribution bias and concentration for yield prediction. Meina were the first to utilize a low-cost UAV RGB imaging system based on ExG color features to predict corn yield. In addition, after converting RGB images to grayscale images, the texture features of the canopy can be analyzed by constructing a grayscale co-occurrence matrix (; ; ), which can indirectly reflect changes in crop yield.
Hyperspectral sensors, with their excellent spectral resolution, can provide information on up to hundreds or even more continuous spectral bands (), and can extract more vegetation indices compared to multispectral sensors (; ; ). Hyperspectral bands can also be directly input as feature vectors into the deep learning models to automatically extract the bands sensitive to yield (; ; ), which is of great value in the information collection for crop yield prediction.
Thermal imaging sensors focus on monitoring canopy temperature, as the degree of water stress and physiological activity in crops directly affect canopy temperature (). When crops are short of water, the weakening of transpiration leads to an increase in canopy temperature. The normalized relative canopy temperature (NRCT) data obtained from thermal imaging sensors () can quantitatively assess the water stress status of crops (similar to the Crop Water Stress Index, CWSI). Research indicates that NRCT can effectively characterize the water metabolism efficiency of crops like soybeans through standardized processing combined with canopy temperature extremes (Tmax and Tmin) (). Although the predictive accuracy of yield using thermal imaging alone is relatively low, multimodal data fusion has proven that thermal features and spectral saturation features are complementary.Especially in dense canopies, the limitation of spectral information approaching saturation can be broken through. The fusion of thermal features with spectral and structural features significantly improves the model performance (; ). It should be noted that canopy temperature can be easily affected by environmental factors such as soil background and atmospheric conditions, requiring radiometric correction and spatial masking techniques (SVM classification to remove soil pixels) to improve data reliability ().
LiDAR technology, with its active remote sensing characteristics and three-dimensional structural analysis capabilities, shows significant advantages in crop monitoring. It can penetrate the vegetation canopy to obtain vertical structural features, addressing the limitations of traditional optical remote sensing that only captures two-dimensional spectral information from the canopy surface (). Researchers used LiDAR sensors to achieve centimeter-level precision three-dimensional point cloud reconstructions in wheat and corn fields respectively, and quantified the vertical distribution differences of canopy photosynthetic parameters (P < 0.05). As LiDAR is not constrained by lighting conditions, it can operate in all weather conditions and effectively reduces spectral saturation issues in tall crops like corn, supplementing information about the middle and lower structural layers and significantly enhancing the physical relevance of yield prediction models (; ). However, the application of LiDAR alone still has the problem of missing spectral information, which restricts the accuracy of physiological parameter inversion, along with high equipment costs and complex data processing (). In response to these issues, the research proposes solutions through multi-source data fusion and algorithm optimization: By combining LiDAR with multispectral/hyperspectral images and using Digital Surface Model (DSM) fusion technology to synchronously extract structural and spectral features, Wenqi Zhou et al. improved the R² of yield prediction to 0.75-0.79 and reduced RRMSE to 1.59%-1.73% in corn studies after fusion.
3.2.3 Ground-truth yield acquisition and label quality
Yield prediction is a supervised-learning task, so reliable yield labels are as important as high-quality UAV imagery. In microplot and breeding-trial studies, ground-truth yield is usually obtained through manual quadrat harvest, whole-plot harvest, or plot-combine harvest. These methods provide direct yield labels, but they are labor-intensive and often produce limited sample sizes (; ; ). Since these labels are commonly aggregated to plot-level yield, UAV-derived features should be extracted within the same plot boundaries. Soil background, shadows, border effects, and non-crop pixels should also be minimized before feature calculation.
At the field and farm scales, combine yield monitors can provide dense georeferenced yield points. These data still require strict quality control before they are used as model labels. Common error sources include grain-flow delay, harvester dynamics at headlands, abrupt changes in travel speed, overlapping harvest passes, inaccurate swath width, variation in grain moisture content, and GNSS positioning errors (; A ). UAV-derived features and yield-monitor data should therefore be aligned using a common coordinate system, temporal matching, interpolation or gridding, outlier filtering, and moisture-standardized yield units. When this linkage is weak, a model may show high accuracy under random cross-validation but learn harvest-related artifacts or local spatial clustering rather than transferable crop-yield signals.
3.3 Data processing
The processing of UAV remote sensing data is a crucial step in building precise and reliable crop yield prediction models. Its quality affects not only prediction accuracy, but also the spatial consistency, radiometric comparability, feature stability, and generalization ability of the model. As shown in Figure 5a, the general data-processing workflow includes image preprocessing, feature extraction, feature selection and fusion, and the construction of model-ready feature vectors for yield prediction.
Figure 5
After the UAV acquires the original image data, necessary image preprocessing is required, including geometric correction, radiometric correction, and registration operations, etc., to ensure spatial accuracy of the data and the consistency of reflectivity. Geometric correction primarily aims to eliminate spatial position errors caused by the instability of UAV flight posture or lens distortion. The mainstream methods in research rely on ground control points (GCPs) or high-precision RTK positioning systems for geographic registration (; ). Radiometric calibration converts the original digital numbers (DN) into reflectance values using black-and-white calibration panels or built-in sensor algorithms. Especially in multispectral and hyperspectral data, dynamic calibration in combination with a sunlight sensor is required to eliminate the effects of light fluctuations (; ; ). Registration is to unify the data obtained from different times, different platforms, and different sensors onto the same spatial coordinate system to ensure the spatial consistency and accuracy of multi-source data (; ; ).
After completing the image preprocessing, it is necessary to extract feature indicators closely related to crop yield from the remote sensing images, including vegetation indices, texture features, and canopy height. Vegetation indices are typically calculated using multispectral or hyperspectral data, reflecting the growth status of crops (; ; ). The NDVI is widely used in yield prediction due to its simplicity, broad applicability, and stability. Other vegetation indices such as NDRE, GNDVI, and SAVI have also gained attention for their outstanding performance in reducing soil background interference, lowering canopy saturation, and enhancing the sensitivity of vegetation information. Other indices, such as SR, EVI, RVI, MSAVI, OSAVI, TCARI, EXG, MTCI, CCCI, and CIRE, are also used in specific research contexts; their abbreviations, definitions, formulas, and representative references are summarized in Table 6. Across the reviewed studies, vegetation indices were mentioned 148 times in total. As shown in Figure 5b, NDVI was the most frequently used vegetation index, followed by NDRE, GNDVI, SAVI, EVI2, SR, EVI, RVI, MSAVI, OSAVI, TCARI, EXG, MTCI, CCCI, and CIRE. This distribution indicates that UAV-based yield prediction still relies heavily on conventional greenness and red-edge indices, while soil-adjusted, pigment-sensitive, and color-based indices are used as complementary variables. These indices are sensitive to the physiological characteristics, growth conditions, and stress responses of crops, and are important input variables for yield prediction models (). Canopy structure parameters such as plant height and coverage are often extracted through RGB images, LiDAR, or 3D reconstruction methods. These indicators visually represent the biomass and growth status of crops and make significant contributions to improving the prediction accuracy of the model (). Additionally, texture features extracted from UAV remote sensing images using methods such as the gray-level co-occurrence matrix (GLCM) are also widely applied in crop yield prediction research. These texture features can capture the spatial heterogeneity of the canopy, significantly enhancing the model’s ability to recognize details of crop growth (; ; ; ).
Table 6
| Vegetation index | Description | Formula | Reference |
|---|---|---|---|
| NDVI | Normalised difference vegetation index | (NIR - Red)/(NIR + Red) | (; ; ; ; ; ; ; ; ; ; ; ; ; ; ; Jikai ; ; ; ; ; ; X. ; ; W. ) |
| NDRE | Normalized difference red edge index | (NIR - Red Edge)/(NIR + Red Edge) | (; ; ; ; ; ; ; ; ; ; ; ; ; ; B. ; ; W. ) |
| GNDVI | Green normalized difference vegetation index | (NIR - Green)/(NIR + Green) | (; ; ; ; ; ; ; ; ; ; ; ; ) |
| EVI-2 | Two-band enhanced vegetation index | (2.5 × (NIR − Red))/(NIR + 2.4 × Red + 1) | (; ; ; ; ) |
| SAVI | Soil-adjusted vegetation index | ((NIR - Red)/(1 + 0.5))/(NIR + Red + 0.5) | (; ; ; ; W. ) |
| RVI | Ratio Vegetation Index | NIR/Red | (; ; ) |
| EXG | Excess green index | 2 × Green − Red − Blue | (; ; ) |
| SCCCI | Simplified canopy chlorophyll content index | NDVI/NDRE | (; ; ) |
| GRRI | Green–red ratio vegetation index | Green/Red | (; ; ) |
| OSAVI | Optimized soil-adjusted vegetation index | 1.16(NIR - Red)/(NIR + Red + 0.16) | (; ; ; ) |
| EVI | Enhanced vegetation index | 2.5 × (NIR − Red)/(NIR + 6.0 × Red − 7.5 × Blue + 1) | (; ; W. ) |
| WDRVI | Wide Dynamic Range Vegetation Index | (0.05 × NIR - Red)/(0.05 × NIR + Red) | (; ) |
| TVI | Transformed Vegetation Index | 0.5 × (120 × (NIR - Green)) - 200 × (Red - Green)) | (; ) |
| MTCI | Meris Terrestrial Chlorophyll Index | (NIR - Red Edge)/(NIR + Red Edge - Green) | (; ; ) |
| TCARI | Transformed chlorophyll absorption in the reflectance index | 3 × [(RE−R) − 0.2(RE−G) × (RE/R)] | (; ) |
| SR | Simple ratio index | NIR/Red | (; ) |
| CIRE | Chlorophyll index red edge | NIR/Red EDGE - 1 | (; ) |
| CCCI | Canopy chlorophyl content index | (NDRE - NDREmin)/(NDRE-max - NDREmin) | (; ) |
| LCI | Leaf chlorophyll index | (NIR - Green)/(NIR + Green) | (; ) |
Introduction and application of vegetation indices.
This includes the abbreviations, full names, and calculation formulas of vegetation indices. Here, Red, Green, Blue, NIR, and Red Edge represent the reflectance (digital numbers) measured within their respective wavelength ranges.
Once feature extraction is complete, feature selection and fusion are typically performed to eliminate redundant information and noise, thereby improving the model’s generalization capability (; ). With the advancement of data fusion methods, many studies have begun to adopt deep learning or machine learning frameworks to integrate different modalities of remote sensing data, fully tap the potential of multi-source remote sensing information in crop yield prediction (; ; ; ). When inputting feature vectors, to further ensure the generalization ability of the prediction model, data standardization or normalization processing is usually adopted to unify the dimensional differences of feature variables at different scales (; ).
Although these methods share a broadly similar workflow, their specific implementation varies with sensor type, crop species, spatial scale, growth stage, and prediction target. Inadequate preprocessing may introduce radiometric inconsistency, geometric mismatch, feature redundancy, or scale mismatch between UAV-derived variables and yield labels. Therefore, data processing should be regarded as a key factor affecting not only model accuracy, but also the transferability and practical reliability of UAV-based crop yield prediction.
3.4 Model construction and input–label–output mapping
After feature extraction and fusion, model construction determines how UAV-derived variables are linked to ground-truth yield labels and prediction outputs. In the reviewed studies, this relationship is not uniform because different studies use different spatial units, label sources, feature representations, and model families. Plot-level vegetation-index, texture, color, and canopy-structure features are commonly linked with manual harvest, whole-plot harvest, or plot-combine yield labels, whereas field-scale mapping studies require spatially corrected yield-monitor data, and regional-scale studies usually depend on the fusion of UAV observations with satellite, meteorological, soil, crop-model, or statistical data (; ; ; ; ; A ; ; ). Therefore, model performance should not be interpreted only according to algorithm type or reported accuracy metrics. Instead, the spatial support of UAV-derived inputs, the source and processing of yield labels, and the intended output target should be considered together. The conceptual workflow of UAV-based yield prediction is shown in Figure 6, and the scale-specific input–label–model–output relationships are further summarized in Table 7.
Figure 6
Table 7
| Spatial scale | UAV-derived input | Ground-truth yield label | Model type | Output target | Main risk |
|---|---|---|---|---|---|
| Microplot | Plot-level VIs, texture, RGB, canopy features | Manual harvest/plot-combine yield | ML/DL/fusion models | Plot-level scalar yield/ranking | Limited samples; plot-boundary mismatch |
| Field | Multi-temporal UAV features, canopy maps, image patches | Combine yield-monitor data | ML/CNN/temporal models | Yield map/management zones | Geolocation error; yield-monitor noise |
| Regional | UAV samples + satellite/weather/soil/crop-model data | Statistics/crop-model outputs | Spatiotemporal models/fusion models | Regional yield estimate/yield trend | Scale mismatch; transferability |
Input–label–model–output mapping for UAV-based crop yield prediction across spatial scales.
As shown in Figure 6, UAV-based yield prediction can be organized into three major spatial contexts. At the microplot scale, UAV-derived structured features and fused UAV features are usually extracted within plot boundaries and linked with plot harvest yield labels. These studies mainly produce plot-level scalar yield estimates for breeding trials, genotype ranking, or treatment comparison, and they are commonly implemented using traditional machine-learning models or deep-learning models (; ; ; ). At the field scale, fused UAV features, image-based features, and temporal UAV features can support management-zone yield prediction, within-field yield mapping, or localized yield estimation. However, these outputs require yield labels with sufficient spatial consistency and positional accuracy, especially when UAV mosaics are linked with yield-monitor points, interpolated yield surfaces, or management-zone labels (; A ; ; ).
Different model families correspond to different forms of input–output mapping. Traditional machine-learning methods, such as LR, PLSR, RF, SVM, GPR, and XGBoost, are frequently used with plot-level vegetation indices, texture metrics, color indices, canopy-height features, and fused tabular variables to generate plot-level or management-zone yield estimates (; , ; ; ). Image-based deep-learning models, including CNN, 3D-CNN, attention-CNN, and hybrid CNN models, can learn spatial canopy patterns from RGB, multispectral, or hyperspectral image patches, orthomosaic tiles, and spectral image cubes. However, patch-level or localized predictions are valid only when the corresponding yield labels have sufficient spatial resolution and geolocation accuracy. If a single plot-level yield value is assigned to many image patches, model accuracy may be overestimated because of pseudo-replication or spatial leakage (; ; ; ; ).
Temporal UAV features provide another important modeling pathway because they can capture crop-development trajectories and yield-formation processes across growth stages. Multi-date vegetation indices, multi-stage spectral features, temporal image sequences, and phenology-related features are often modeled using LSTM, GRU, CNN-LSTM, CNN-GRU, 3D-CNN, or attention-based temporal networks to predict final yield or stage-sensitive yield responses (; ; ; ; ). Nevertheless, the transferability of these models depends on consistent acquisition timing, radiometric calibration, phenological alignment, and cross-year validation. At the regional scale, UAV data are rarely sufficient as a stand-alone data source because of limited spatial coverage. Instead, UAV samples are more commonly used as high-resolution calibration, validation, or scaling information in combination with satellite time series, meteorological data, soil data, crop-model variables, or statistical data to produce regional yield estimates or gridded yield surfaces (; ).
Overall, the framework and mapping summarized in Figure 6, Table 7 indicate that UAV-based yield prediction should be evaluated as an input–label–output system rather than as a simple comparison of model names. A high R² obtained from plot-level scalar yield prediction should not be directly interpreted as evidence that the same model can generate reliable within-field yield maps or regional yield estimates. Future studies should therefore explicitly report four elements when presenting model performance: the spatial support of UAV-derived inputs, the method used to obtain ground-truth yield, the aggregation or interpolation procedure used to construct model labels, and the intended prediction output. This reporting practice would make accuracy metrics more comparable across studies and reduce the risk of transferring conclusions across incompatible spatial scales.
4 Discussion
The literature analysis in Section 3 clarifies the general process of recent research on UAV-based crop yield prediction models, accompanied by visualizations and detailed analyses.During the literature review, a strong emphasis was placed on identifying current challenges and exploring future research directions, which will be discussed in depth in this section.
4.1 Methods to improve yield prediction accuracy
4.1.1 Determining the optimal data acquisition period
In research on crop yield prediction based on UAV remote sensing, determining the optimal timing and frequency for data acquisition is a complex and critical issue. High-frequency flights can increase costs and time, while insufficient flights can negatively impact the predictive performance of the models, influenced by the combined effects of crop growth characteristics and environmental factors.
From the perspective of crop growth characteristics, at each stage of the growth cycle of the same crop, various growth indicators change significantly, which is an important factor influencing yield prediction. As shown in Figure 7, we have compiled the growth stages at which different crops achieved the highest accuracy rates from the literature. Taking wheat as an example, the heading, flowering, and filling stages are the key periods that determine the final yield. During these reproductive growth stages, the development status of flower organs directly determines its yield rate, and the physiological characteristics and growth conditions of the plants are closely related to the formation of yield. Existing research indicates that multispectral remote sensing images and related indices captured during the heading and flowering stages can effectively reflect the growth trends and yield potential of wheat (; ; ; ). analyzed data of filling, heading, and maturity stages of wheat and found that the yield prediction model established based on the data of filling and heading stages performed quite well (). Different vegetation indices also exhibit certain differences at various times. Liu et al. conducted research and found that the reciprocal ratio vegetation index (repRVI) achieved the best prediction results in the late grain-filling stage, while the MTCI index achieved the best prediction results in the jointing stage (). Furthermore, the booting and flowering stages of rice are crucial for yield formation. The development status of the panicles and the filling degree of the grains during this period significantly affect the final yield. Therefore, the remote sensing data obtained during this stage can better reflect the actual yield potential of the crop. For maize, the V6 stage has been reported as an important observation window, and data collected during this period can improve yield-prediction performance (). Overall, data acquisition for crop yield prediction should focus on the mid-growth stages of crops, specifically during the rapid growth phase when physiological characteristics are distinctly different, significantly impacting subsequent model inputs.
Figure 7
Environmental factors also play a crucial role in the quality and timing of UAV remote sensing data acquisition (). Meteorological conditions such as light, temperature, and humidity can significantly affect model accuracy (). Through the analysis of relevant research literature (Figure 7), it is recommended that ideal data acquisition occurs during clear weather conditions with ample and stable lighting, generally between 10 AM and 2 PM local time. During this period, the solar altitude angle is suitable, and the light is relatively uniform, which can effectively reduce the interference of shadows and light reflection on image quality, and improve the stability and accuracy of remote sensing data. In addition, stable meteorological conditions help to reduce the short-term fluctuations in the physiological state of crops, allowing the data to more accurately reflect the true growth status of the crops. At the same time, during data acquisition adverse weather conditions such as rain and strong winds should be avoided to prevent the surface of the crop canopy from becoming moist, which could cause changes in spectral characteristics and thereby reduce the quality and effectiveness of the remote sensing data.
4.1.2 Feature fusion and selection
Feature selection is a key step in enhancing the generalization ability of models by eliminating redundant variables and noise interference. Due to the numerous vegetation indices that can be extracted from UAV multispectral and hyperspectral data, inputting all vegetation indices into the model without screening may lead to multicollinearity caused by high correlations between different indices (e.g., the NDVI and EVI formulas are similar), resulting in unstable parameter estimates of the model. When the data sample is limited, having too many input variables will increase the risk of overfitting. The general methods for feature selection include calculating Spearman correlation coefficients, LASSO algorithms, multiple linear regression, variance inflation factor (VIF), random forests, and Boruta feature selection, among others (; ; ; ; ; ). Zhang et al. determined NDVI and RVI as the optimal combination through a stepwise selection method based on multiple linear regression. Their prediction model achieved a variance of 81.8% for the yield of the soybean plots, proving the sensitivity of the short-wave infrared band to crop water stress and the complementarity of the red light band to chlorophyll absorption (). Through the Gini importance assessment of random forest, Xiang Youzhen et al. (2023) selected RVI, NDVI and EVI2 from 14 vegetation indices to form the optimal subset. This resulted in an increase of R² for predicting winter wheat leaf area index to 0.801, indicating that the combination of different spectral bands can effectively distinguish the physiological states of the canopy at different growth stages. Compared with machine learning, the significant advantage of deep learning is the automatic feature extraction (). Addressing high-dimensional spatiotemporal data, Bhadra et al. compared the feature extraction efficiency of a 3D-CNN architecture, finding that DenseNet automatically captures key patterns of temporal and spatial variation in canopy coverage through dense inter-layer connections. Their model achieved a 23% reduction in complexity after training with 30, 000 samples, and the R² value remained stable at 0.69. This demonstrates the advantage of deep learning in automatically screening out latent features (). Furthermore, employed path analysis to reveal the causal chain between features and yield: SAVI and NDVI predominantly influence yield variation through leaf area index (direct effect > 0.65), while texture features (such as contrast and entropy) exert indirect effects through adjusting the canopy density. This finding provides a theoretical basis for feature selection based on physiological mechanisms ().
Due to the limitations of single-sensor data, multi-source data fusion can complement and enhance decision reliability. In the face of complex farmland dynamics, multi-technology collaboration can improve interference resistance. By integrating multi-dimensional features (spectral, texture, temperature), model robustness can be optimized, reducing redundant noise and ultimately achieving precise and stable yield predictions (). further proposed a multimodal image fusion (MIF) attention mechanism, which dynamically weighting and fusing RGB, hyperspectral near-infrared (HNIR), and thermal infrared image features. The constructed MultimodalNet model achieved adaptive optimization across varieties and irrigation regimes in field-scale predictions of winter wheat, with its dynamic attention allocation strategy significantly enhancing predictive robustness compared to traditional equivalent stacking fusion methods. This systematically validated the synergistic effects of spectral, thermal, and structural features, indicating that the joint analysis of vegetation indices, canopy temperature, and three-dimensional point cloud features can enhance the characterization of photosynthetic efficiency and biomass accumulation (). For temporal feature integration, Ren et al. proposed a “growth stage adaptive fusion” method, dynamically weighting vegetation indices (EVI-2, NDVI) and maturity group parameters during different growth periods (from flowering to grain-filling stage) using Gaussian process regression, reducing prediction error (RMSE) by 18.7% compared to static fusion strategies, underscoring the importance of temporal associative features in modeling the yield formation process (). Additionally, innovatively fused the two-dimensional spectral response of multispectral images with the three-dimensional canopy volume features reconstructed from RGB, utilizing the XGBoost algorithm to analyze the spatial heterogeneity of soybean canopies, achieving an accuracy rate of 91.36%. This confirmed that the coupling of geometric features and spectral features can overcome the limitations of traditional two-dimensional remote sensing analysis.
4.1.3 Innovation and optimization of models
Model innovation and optimization in UAV-based crop yield prediction should be evaluated not only according to reported accuracy, but also according to the correspondence among input data structure, yield-label quality, computational cost, interpretability, and application scale. Ensemble learning has been widely used to improve prediction robustness by combining multiple base learners, which can reduce the overfitting risk of individual models and enhance the stability of prediction results (). The diversity of base learners is an important factor affecting ensemble performance, because heterogeneous learners may capture complementary relationships between UAV-derived features and yield (). For example, stacking regression has been used to integrate RF, SVM, GP, and RR models, showing improved performance compared with single base learners (). However, increasing the number of base learners does not necessarily guarantee higher accuracy, and model combinations may differ in stability under different data conditions (). The choice of ensemble strategy is also important. Stacking regression, feature-weighted simple fusion, and average ensemble strategies may produce different levels of stability when handling multimodal UAV data (). As UAV remote sensing data become more heterogeneous, ensemble models are increasingly used to integrate multimodal information, but this also increases workflow complexity and may reduce interpretability (). Therefore, ensemble models should be assessed not only by accuracy improvement, but also by data dependency, computational cost, and practical applicability when multiple sensor data or multi-period images are fused (, ).
CNN-based and temporal deep-learning models provide another important pathway for UAV-based yield prediction because they can extract spatial, spectral, and temporal patterns directly from image patches, spectral cubes, or multi-date UAV observations. Attention mechanisms can help CNNs emphasize yield-related spatial regions or growth stages within the input data (). Multi-modal and multi-temporal inputs can further enrich the representation of crop growth conditions, especially when RGB, multispectral, hyperspectral, structural, or meteorological variables are jointly used (). Hybrid CNNs and 3D-CNNs extend conventional two-dimensional convolution by incorporating additional spectral, spatial, or temporal dimensions, making them suitable for multidimensional UAV data (; ). Similarly, CNN-GRU models combine spatial feature extraction with sequential dependency learning and are therefore suitable for crop growth processes observed across multiple stages (). However, these advantages depend on sufficient labeled samples, spatially reliable yield labels, consistent image acquisition, and adequate computing resources. If plot-level yield labels are repeatedly assigned to many image patches, the reported accuracy may be inflated by pseudo-replication or spatial leakage.The general workflow of CNN-based yield prediction models, including multimodal input, feature extraction, feature fusion, and regression output, is summarized in Figure 8.
Figure 8
Therefore, the reviewed model families are compared in Table 8 in terms of applicable conditions, data dependency, computational cost, and major limitations. This comparison is intended to clarify the practical conditions under which each model family is reliable, rather than to rank models only according to reported R² or RMSE values.
Table 8
| Model family | Applicable condition | Data dependency | Computational cost and main limitation | Representative references |
|---|---|---|---|---|
| Linear and shallow machine-learning models | Suitable for plot-level prediction using vegetation indices, spectral bands, texture features, or fused tabular variables. | Low to medium; requires extracted UAV-derived features and matched yield labels. | Low to medium cost; limited ability to represent complex spatial or temporal canopy patterns. | (; ) |
| Ensemble learning models | Suitable when multiple base learners or feature groups are combined to improve prediction robustness. | Medium to high; requires multiple model outputs, feature subsets, or fused input variables. | Medium to high cost; may improve accuracy but increase workflow complexity and reduce interpretability. | (; ; ; ) |
| CNN-based models | Suitable for learning spatial canopy patterns from RGB, multispectral, or hyperspectral image patches and orthomosaic tiles. | High; requires image samples with spatially consistent yield labels. | High cost; patch-level prediction may be affected by pseudo-replication or spatial leakage when plot-level labels are reused. | (; J. ; ) |
| 3D-CNN and spectral–spatial CNN models | Suitable for spectral–spatial feature learning from image cubes, multi-band inputs, or interpolated spectral features. | High; requires calibrated spectral images, sufficient samples, and consistent preprocessing. | High cost; sensitive to sample size, image noise, and sensor inconsistency. | (; ) |
| Multi-temporal deep-learning models | Suitable for modeling crop growth trajectories and yield-formation processes from multi-date UAV observations. | High; requires consistent acquisition timing, temporal alignment, and multi-stage UAV features. | High cost; transferability may decrease when acquisition dates, growth stages, or environments differ. | (; ; ) |
| Multi-source fusion models | Suitable for integrating canopy spectral, structural, thermal, texture, meteorological, or remotely sensed variables. | High; requires heterogeneous data sources and consistent feature-level or decision-level fusion. | Medium to high cost; fusion can improve robustness but may increase data-processing burden and interpretation difficulty. | (; W. ) |
Cross-comparison of model families used in UAV-based crop yield prediction.
Overall, model selection in UAV-based yield prediction should be understood as a trade-off among prediction accuracy, data dependency, computational cost, interpretability, and deployment feasibility. Shallow machine-learning models remain useful when the available dataset is limited and UAV-derived variables have already been extracted as tabular features. Ensemble learning and multi-source fusion can improve robustness by exploiting complementary information from different models or data streams, but they also increase workflow complexity. CNN-based and temporal deep-learning models are more powerful for spatially and temporally structured UAV data, but their reliability depends strongly on label quality, sample independence, acquisition consistency, and computing resources. Therefore, model comparison should move beyond listing model names and reported performance values, and should instead clarify the data and application conditions under which each model family is reliable.
4.1.4 Spatial dependence, scale transfer, and spatiotemporal modeling
Spatial autocorrelation is not only a GIS diagnostic. It is closely related to how model accuracy and generalization should be interpreted. In UAV-based yield prediction, adjacent plots or neighboring field pixels often share similar soil texture, management practices, irrigation status, microclimatic conditions, and phenological timing. When these spatially correlated samples are randomly divided into training and testing sets, the reported R² may be overly optimistic, and the RMSE may be artificially low (; ). In this case, model performance may reflect local spatial memory rather than transferable crop-yield signals.
Validation design should therefore match the prediction scale. For microplot studies, plot-level or block-level cross-validation can reduce the risk of placing repeated observations from the same plot in both training and testing sets. For field-scale studies, spatially blocked validation and independent-field testing are usually more informative than random partitioning. For regional yield prediction, spatiotemporal modeling is needed because yield patterns are shaped by weather anomalies, soil heterogeneity, management practices, and phenological progression. Conventional tools such as GWR, Moran’s I, and variogram-based diagnostics remain useful. Newer models, including graph-based models, attention-based architectures, 3D-CNNs, CNN-GRU/LSTM networks, and deep Gaussian process models, can further represent spatial neighborhoods and temporal trajectories (; ; ; ).
The main implication is that spatial scale, model architecture, and validation design should be reported and interpreted together. A model designed to predict plot-level yield from mean vegetation indices should not be evaluated in the same way as a model designed to generate localized yield maps. Future studies should clearly report the spatial unit of prediction, the spatial unit of validation, and whether the model was tested across plots, fields, years, cultivars, or regions. With this information, spatial autocorrelation can support more credible model evaluation rather than remain a descriptive statistic.
4.2 Future research directions: from experimental accuracy to field deployment
Future research on UAV-based crop yield prediction should be guided by deployment bottlenecks rather than by technology labels alone. Key priorities include scale-defined benchmark datasets with rigorous yield-label quality control, field-deployable workflows that integrate UAV, satellite, ground, edge, and cloud data streams, and causal or explainable spatiotemporal modeling frameworks. By considering data scale, label quality, model generalization, and field-operation constraints within a unified framework, UAV-based yield prediction can move beyond experimental accuracy comparison and provide more stable, interpretable, and deployable decision support for agricultural management.
4.2.1 Scale-defined benchmark datasets and ground-truth quality control
Scale-defined benchmark datasets should explicitly document the spatial support of imagery, the source and resolution of yield labels, and the validation-splitting strategy. For microplot studies, this requires standardized plot-boundary extraction, edge-pixel removal, yield moisture correction, and plot-level validation. For field- or farm-scale studies, raw combine yield-monitor data should be systematically cleaned before yield maps are used as model labels. This process should include combine-delay correction, georeferencing assessment, outlier filtering, and uncertainty reporting (; A ). Without such quality control, improvements in model architecture may simply compensate for noisy labels rather than reveal robust and transferable crop-yield mechanisms.
4.2.2 Field-deployable UAV-satellite-ground and edge-cloud workflows
Field deployment also requires UAV-based yield prediction to move from isolated UAV flights toward integrated workflows that combine UAV-derived fine-scale information, satellite-based temporal continuity, ground observations, and farm-machinery data. UAV imagery is well suited for high-resolution calibration and local diagnosis, but regional or season-long yield prediction usually requires satellite time series, meteorological data, soil information, and crop-management records to provide temporal continuity and broader spatial coverage. In this context, edge–cloud workflows should be evaluated not only by inference speed, but also by their ability to operate under real field constraints, including onboard power supply, payload capacity, communication bandwidth, image tiling, model compression, illumination and wind variability, data synchronization, and compatibility with farm operations. Similar deployment constraints have also been emphasized in recent UAV-based field-crop-counting studies, where semantic gaps, temporal decay, economic feasibility, and workflow integration were identified as key barriers to transferring deep-learning models from controlled datasets to operational field applications (). For yield prediction, these issues suggest that crop counting, canopy-structure characterization, UAV–satellite data fusion, and yield estimation should be connected as a unified decision chain rather than treated as separate computer-vision or remote-sensing tasks.
4.2.3 Causal and explainable spatiotemporal modeling for decision-level trust
Causal interpretability is important for making UAV-based crop yield prediction reliable in practical applications. Methods such as SHAP, LIME, attention heatmaps, and partial-dependence plots can identify influential variables. However, these post hoc explanations alone cannot prove that a model has learned agronomically meaningful mechanisms. A more reliable approach is to combine explainable artificial intelligence with crop physiology, phenology, and management knowledge. Spectral indices should be interpreted in relation to chlorophyll content, biomass accumulation, water stress, canopy closure, and grain filling. Texture features and LiDAR-derived variables should be linked to canopy architecture, stand uniformity, and plant spatial distribution. Temporal features should be connected to key stages of yield formation. With these agronomic and physiological constraints, models can reduce their dependence on spurious correlations caused by soil background, illumination variability, management zones, or harvest-map artifacts. This can improve trust among growers, breeders, and agricultural decision makers.
5 Conclusion
This review synthesized 70 peer-reviewed studies published between 2018 and 2025 on UAV-based yield prediction for soybean, corn, wheat, and rice. Using a “Data–Ground Truth–Model–Decision” framework, it examined how UAV platforms, sensor configurations, feature engineering, yield-label acquisition, model construction, validation design, and decision outputs jointly shape prediction reliability. The reviewed studies show that UAV remote sensing has strong potential for high-resolution crop yield prediction. Multispectral, RGB, hyperspectral, thermal, LiDAR, and fused data can capture crop growth, canopy structure, and stress-related information at different growth stages. Machine-learning and deep-learning models further improve the use of these data for yield estimation.
The main limitation is that high prediction accuracy does not always indicate strong practical reliability. UAV-derived features, ground-truth yield labels, and model outputs must be aligned at the same spatial scale. A plot-level yield model, a field-scale yield map, and a regional yield estimate require different label sources, validation strategies, and decision targets. Random validation can also overestimate model performance when spatially related samples or repeated observations are shared between training and testing sets. For this reason, future studies should report prediction scale, yield-label resolution, validation design, and transfer-testing conditions more clearly.
UAV-based crop yield prediction is moving from experimental accuracy comparison toward field-oriented decision support. Further progress will depend on scale-defined benchmark datasets, rigorous ground-truth yield quality control, UAV–satellite–ground data fusion, spatially aware validation, causal and explainable spatiotemporal modeling, and edge–cloud workflows that can operate under real field conditions. By integrating data scale, label quality, model generalization, and deployment constraints, UAV-based yield prediction can become more robust, interpretable, and useful for breeding evaluation, precision field management, and agricultural decision making.
Statements
Data availability statement
The original contributions presented in the study are included in the article/supplementary material. Further inquiries can be directed to the corresponding authors.
Author contributions
PZ: Investigation, Writing – review & editing, Conceptualization, Data curation, Formal analysis, Methodology, Software, Visualization, Writing – original draft. WL: Conceptualization, Investigation, Writing – original draft, Writing – review & editing, Data curation, Formal analysis, Methodology, Software, Visualization. CW: Resources, Supervision, Writing – review & editing, Conceptualization, Funding acquisition, Methodology, Project administration, Validation. BW: Writing – review & editing. TY: Writing – review & editing. XW: Writing – review & editing. CL: Methodology, Writing – review & editing. HL: Writing – review & editing. FW: Funding acquisition, Methodology, Project administration, Resources, Supervision, Writing – review & editing, Conceptualization, Validation.
Funding
The author(s) declared that financial support was received for this work and/or its publication. This review was supported by the National Key R&D Program of China (Grant No. 2023YFD2301500).
Acknowledgments
Thanks to all co-authors for best participation in literature review.
Conflict of interest
The author(s) declared that this work was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Generative AI statement
The author(s) declared that generative AI was not used in the creation of this manuscript.
Any alternative text (alt text) provided alongside figures in this article has been generated by Frontiers with the support of artificial intelligence and reasonable efforts have been made to ensure accuracy, including review by the authors wherever possible. If you identify any issues, please contact us.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
References
1
AbderrazakB.MorinD.BonnF.HueteA. (1996). A review of vegetation indices. Remote Sens. Rev.13, 95–120. doi: 10.1080/02757259509532298
2
AlabiT. R.AbebeA. T.ChigezaG.FowobajeK. R. (2022). Estimation of soybean grain yield from multispectral high-resolution UAV data with machine learning models in West Africa. Remote Sens. Applicat.: Soc. Environ.27, 100782. doi: 10.1016/j.rsase.2022.100782
3
AliN.MohammedA.BaisA.BerraiesS.RuanY.CuthbertR. D.et al. (2024). Field-scale precision: Predicting grain yield of diverse wheat breeding lines using high-throughput UAV multispectral imaging. IEEE J. Sel. Top. Appl. Earth Obs. Remote Sens.17, 11419–11433. doi: 10.1109/jstars.2024.3411994
4
Andrade JúniorA. S.SilvaS. P.SetúbalI. S.SouzaH. A.VieiraP. F. M. J.CasariR. A. C. N. (2022). Predicting soybean grain yield using aerial drone images. Rev. Bras. Engenharia. Agrícola. e. Ambiental.26, 466–476. doi: 10.1590/1807-1929/agriambi.v26n6p466-476
5
BallesterosR.OrtegaJ. F.HernandezD.MorenoM. A. (2018). Onion biomass monitoring using UAV-based RGB imaging. Precis. Agric.19, 840–857. doi: 10.1007/s11119-018-9560-y
6
BaoL.LiX.YuJ.LiG.ChangX.YuL.et al. (2023). Forecasting spring maize yield using vegetation indices and crop phenology metrics from UAV observations. Food Energy Secur.13, e505. doi: 10.1002/fes3.505
7
BarzinR.PathakR.LotfiH.VarcoJ.BoraG. C. (2020). Use of UAS multispectral imagery at different physiological stages for yield prediction and input resource optimization in corn. Remote Sens.12 (15), 2392. doi: 10.3390/rs12152392
8
BasconM. V.NakataT.ShibataS.TakataI.KobayashiN.KatoY.et al. (2022). Estimating yield-related traits using UAV-derived multispectral images to improve rice grain yield prediction. Agriculture12, 1141. doi: 10.3390/agriculture12081141
9
BerveglieriA.ImaiN. N.WatanabeF. S. Y.TommaselliA. M. G.EderliG. M. P.de AraújoF. F.et al. (2024). Remote prediction of soybean yield using UAV-based hyperspectral imaging and machine learning models. AgriEngineering6, 3242–3260. doi: 10.3390/agriengineering6030185
10
BhadraS.SaganV.SkobalskiJ.GrignolaF.SarkarS.VilbigJ. (2023). End-to-end 3D CNN for plot-scale soybean yield prediction using multitemporal UAV-based RGB images. Precis. Agric.25, 834–864. doi: 10.1007/s11119-023-10096-8
11
BianC.ShiH.WuS.ZhangK.WeiM.ZhaoY.et al. (2022). Prediction of field-scale wheat yield using machine learning method and multi-spectral UAV data. Remote Sens.14 (6), 1474. doi: 10.3390/rs14061474
12
BöhlerJ. E.SchaepmanM. E.KneubühlerM. (2018). Crop classification in a heterogeneous arable landscape using uncalibrated UAV data. Remote Sens.10, 1282. doi: 10.3390/rs10081282
13
BoonM. A.DrijfhoutA. P.TesfamichaelS. (2017). Comparison of a fixed-wing and multi-rotor UAV for environmental mapping applications: A case study. Int. Arch. Photogrammetry. Remote Sens. Spatial. Inf. Sci.XLII-2/W6, 47–54. doi: 10.5194/isprs-archives-XLII-2-W6-47-2017
14
CenH.WanL.ZhuJ.LiY.LiX.ZhuY.et al. (2019). Dynamic monitoring of biomass of rice under different nitrogen treatments using a lightweight UAV with dual image-frame snapshot cameras. Plant Methods15, 32. doi: 10.1186/s13007-019-0418-8
15
ChaiL.JiangH.CrowW. T.LiuS.ZhaoS.LiuJ.et al. (2020). Estimating corn canopy water content from normalized difference water index (NDWI): An optimized NDWI-based scheme and its feasibility for retrieving corn VWC. IEEE Trans. Geosci. Remote Sens.59, 8168–8181. doi: 10.1109/tgrs.2020.3041039
16
da SilvaE. E.Rojo BaioF. H.Ribeiro TeodoroL. P.da Silva JuniorC. A.BorgesR. S.TeodoroP. E. (2020). UAV-multispectral and vegetation indices in soybean grain yield prediction based on in situ observation. Remote Sens. Applicat.: Soc. Environ.18, 100318. doi: 10.1016/j.rsase.2020.100318
17
DilmuratK.SaganV.MooseS. (2022). Ai-driven maize yield forecasting using unmanned aerial vehicle-based hyperspectral and LIDAR data fusion. ISPRS. Ann. Photogramm. Remote Sens. Spatial. Inf. Sci.53, 193–199. doi: 10.5194/isprs-annals-V-3-2022-193-2022
18
DoughtyC. L.CavanaughK. C. (2019). Mapping coastal wetland biomass from high resolution unmanned aerial vehicle (UAV) imagery. Remote Sens.11, 540. doi: 10.3390/rs11050540
19
DuanB.FangS.ZhuR.WuX.WangS.GongY.et al. (2019). Remote estimation of rice yield with unmanned aerial vehicle (UAV) data and spectral mixture analysis. Front. Plant Sci.10. doi: 10.3389/fpls.2019.00204
20
ElsayedS.ElhoweityM.IbrahimH. H.DewirY. H.MigdadiH. M.SchmidhalterU. (2017). Thermal imaging and passive reflectance sensing to estimate the water status and grain yield of wheat under different irrigation regimes. Agric. Water Manage.189, 98–110. doi: 10.1016/j.agwat.2017.05.001
21
EugenioF. C.GrohsM.VenancioL. P.SchuhM.BottegaE. L.RuosoR.et al. (2020). Estimation of soybean yield from machine learning techniques and multispectral RPAS imagery. Remote Sens. Applicat.: Soc. Environ.20, 100397. doi: 10.1016/j.rsase.2020.100397
22
FanJ.ZhouJ.WangB.de LeonN.KaepplerS. M.LimaD. C.et al. (2022). Estimation of maize yield and flowering time using multi-temporal UAV-based hyperspectral data. Remote Sens.14, 3052. doi: 10.3390/rs14133052
23
FeiS.HassanM. A.HeZ.ChenZ.ShuM.WangJ.et al. (2021). Assessment of ensemble learning to predict wheat grain yield based on UAV-multispectral reflectance. Remote Sens.13, 2338. doi: 10.3390/rs13122338
24
FeiS.HassanM. A.XiaoY.SuX.ChenZ.ChengQ.et al. (2022). UAV-based multi-sensor data fusion and machine learning algorithm for yield prediction in wheat. Precis. Agric.24, 187–212. doi: 10.1007/s11119-022-09938-8
25
FuZ.JiangJ.GaoY.KrienkeB.WangM.ZhongK.et al. (2020). Wheat growth monitoring and yield estimation based on multi-rotor unmanned aerial vehicle. Remote Sens.12 (3), 508. doi: 10.3390/rs12030508
26
FurukawaF.MaruyamaK.SaitoY. K.KanekoM. (2020). “ Corn height estimation using UAV for yield prediction and crop monitoring,” in Unmanned Aerial Vehicle: Applications in Agriculture and Environment. Eds. AvtarR.WatanabeT. ( Springer International Publishing, Cham).
27
GanoB.BhadraS.VilbigJ. M.AhmedN.SaganV.ShakoorN. (2024). Drone-based imaging sensors, techniques, and applications in plant phenotyping for crop breeding: A comprehensive review. Plant Phenome. J.7, e20100. doi: 10.1002/ppj2.20100
28
GuY.WangY.WuY.WarnerT. A.GuoT.AiH.et al. (2024). Novel 3D photosynthetic traits derived from the fusion of UAV LiDAR point cloud and multispectral imagery in wheat. Remote Sens. Environ.311, 114244. doi: 10.1016/j.rse.2024.114244
29
GuebsiR.MamiS.ChokmaniK. (2024). Drones in precision agriculture: A comprehensive review of applications, technologies, and challenges. Drones8, 686. doi: 10.3390/drones8110686
30
GuoY.ZhangX.ChenS.WangH.JayaveluS.CammaranoD.et al. (2022). Integrated UAV-based multi-source data for predicting maize grain yield using machine learning approaches. Remote Sens.14 (24), 6290. doi: 10.3390/rs14246290
31
HabibiL. N.MatsuiT.TanakaT. S. T. (2024). Critical evaluation of the effects of a cross-validation strategy and machine learning optimization on the prediction accuracy and transferability of a soybean yield prediction model using UAV-based remote sensing. J. Agric. Food Res.16, 101096. doi: 10.1016/j.jafr.2024.101096
32
HaghighattalabA.CrainJ.MondalS.SinghR.PolandJ. (2017). Application of geographically weighted regression to improve grain yield prediction from unmanned aerial system imagery. Crop Sci.57, 2478-2489. doi: 10.2135/cropsci2016.12.1016
33
Herrero-HuertaM.Rodriguez-GonzalvezP.RaineyK. M. (2020). Yield prediction by machine learning from UAS-based multi-sensor data fusion in soybean. Plant Methods16, 78. doi: 10.1186/s13007-020-00620-6
34
HerrmannI.BdolachE.MontekyoY.RachmilevitchS.TownsendP. A.KarnieliA. (2020). Assessment of maize yield and phenology by drone-mounted superspectral camera. Precis. Agric.21, 51–76. doi: 10.1007/s11119-019-09659-5
35
HuT. T. Z.CuiX. L. (2023). Analysis of reliability of UAV multispectral data and yield estimation of winter wheat. Trans. Chin. Soc. For. Agric. Machinery.54, 217–225. doi: 10.6041/j.issn.1000-1298.2023.12.020
36
HuiD.JangC.NamoiN.WolskeE.WasongaD.BehnkeG.et al. (2024). Integrating plant morphological traits with remote-sensed multispectral imageries for accurate corn grain yield prediction. PloS One19 (4), e0297027. doi: 10.1371/journal.pone.0297027
37
HuntE. R.JrDaughtryC. S. T. (2018). What good are unmanned aircraft systems for agricultural remote sensing and precision agriculture? Int. J. Remote Sens.39, 5345–5376. doi: 10.1080/01431161.2017.1410300
38
HusinZ.ShakaffA. Y. M.AzizA. H. A.FarookR. S. M. J. I. J. D. C. T.Applications, I (2013). Plant chili disease detection using the RGB color model7, 107–117. doi: 10.4156/jdcta.vol7.issue10.11
39
JiangX.SunS.AdamchukV.WeismanG.RamsayP.RinconA. R. (2024). Spinach yield mapping using multispectral UAV imagery. Smart. Agric. Technol.7, 100389. doi: 10.1016/j.atech.2023.100389
40
KangY.WangY.FanY.WuH.ZhangY.YuanB.et al. (2024). Wheat yield estimation based on unmanned aerial vehicle multispectral images and texture feature indices. Agriculture14, 167. doi: 10.3390/agriculture14020167
41
KheirA. M. S.AlkharabshehH. M.SeleimanM. F.Al-SaifA. M.AmmarK. A.AttiaA.et al. (2021). Calibration and validation of AQUACROP and APSIM models to optimize wheat yield and water saving in arid regions10, 1375. doi: 10.3390/land10121375
42
KilleenP.KiringaI.YeapT.BrancoP. (2024). Corn grain yield prediction using UAV-based high spatiotemporal resolution imagery, machine learning, and spatial cross-validation. Remote Sens.16 (4), 683. doi: 10.3390/rs16040683
43
KumarC.DhillonJ.HuangY.ReddyK. (2025). Explainable machine learning models for corn yield prediction using UAV multispectral data. Comput. Electron. Agric.231, 109990. doi: 10.1016/j.compag.2025.109990
44
KumarC.MubvumbaP.HuangY.DhillonJ.ReddyK. (2023). Multi-stage corn yield prediction using high-resolution UAV multispectral data and machine learning models. Agronomy13, 1277. doi: 10.3390/agronomy13051277
45
KuriharaJ.NagataT.TomiyamaH. (2023). Rice yield prediction in different growth environments using unmanned aerial vehicle-based hyperspectral imaging. Remote Sens.15, 2004. doi: 10.3390/rs15082004
46
LiZ.ChenZ.ChengQ.DuanF.SuiR.HuangX.et al. (2022). UAV-based hyperspectral and ensemble machine learning for predicting yield in winter wheat. Agronomy12, 202. doi: 10.3390/agronomy12010202
47
LiZ.GuoX. (2015). Remote sensing of terrestrial non-photosynthetic vegetation using hyperspectral, multispectral, SAR, and LiDAR data. Prog. Phys. Geogr.40 (2), 276–304. doi: 10.1177/0309133315582005
48
LiW.NiuZ.ChenH.LiD.WuM.ZhaoW. (2016). Remote estimation of canopy height and aboveground biomass of maize using high-resolution stereo images from a low-cost unmanned aerial vehicle system. Ecol. Indic.67, 637–648. doi: 10.1016/j.ecolind.2016.03.036
49
LinJ.WangM.MaM.LinY. (2018). Aboveground tree biomass estimation of sparse subalpine coniferous forest with UAV oblique photography. Remote Sens.10, 1849. doi: 10.3390/rs10111849
50
LiuY.SunL.LiuB.WuY.MaJ.ZhangW.et al. (2023). Estimation of winter wheat yield using multiple temporal vegetation indices derived from UAV-based multispectral and hyperspectral imagery. Remote Sens.15, 4800. doi: 10.3390/rs15194800
51
LiuJ.XiangJ.JinY.LiuR.YanJ.WangL. (2021). Boost precision agriculture with unmanned aerial vehicle remote sensing and edge intelligence: A survey. Remote Sens.13, 4387. doi: 10.3390/rs13214387
52
LiuJ.ZhuY.TaoX.ChenX.LiX. (2022). Rapid prediction of winter wheat yield and nitrogen use efficiency using consumer-grade unmanned aerial vehicles multispectral imagery. Front. Plant Sci.13. doi: 10.3389/fpls.2022.1032170
53
LuoS.JiangX.JiaoW.YangK.LiY.FangS. (2022). Remotely sensed prediction of rice yield at different growth durations using UAV multispectral imagery. Agriculture12 (9), 1447. doi: 10.3390/agriculture12091447
54
LyleG.BryanB. A.OstendorfB. (2014). Post-processing methods to eliminate erroneous grain yield measurements: Review and directions for future development. Precis. Agric.15, 377–402. doi: 10.1007/s11119-013-9336-3
55
MaimaitijiangM.SaganV.SidikeP.HartlingS.EspositoF.FritschiF. B. (2020). Soybean yield prediction from UAV using multimodal data fusion and deep learning. Remote Sens. Environ.237, 111599. doi: 10.1016/j.rse.2019.111599
56
MeiyanS.MengyuanS.QizhouD.XiaohongY.BaoguoL.YuntaoM. (2022). Estimating the maize above-ground biomass by constructing the tridimensional concept model based on UAV-based digital and multi-spectral images. Field Crops Res.282, 108491. doi: 10.1016/j.fcr.2022.108491
57
MessinaG.ModicaG. (2020). Applications of UAV thermal imagery in precision agriculture: State of the art and future research outlook. Remote Sens.12, 1491. doi: 10.3390/rs12091491
58
MiaM. S.TanabeR.HabibiL. N.HashimotoN.HommaK.MakiM.et al. (2023). Multimodal deep learning for rice yield prediction using UAV-based multispectral imagery and weather data. Remote Sens.15, 2511. doi: 10.3390/rs15102511
59
MurugananthamP.WibowoS.GrandhiS.SamratN. H.IslamN. (2022). A systematic literature review on crop yield prediction with deep learning and remote sensing. Remote Sens.14, 1990. doi: 10.3390/rs14091990
60
MyneniR. B.HallF. G.SellersP. J.MarshakA. L. (1995). The interpretation of spectral vegetation indexes. IEEE Trans. Geosci. Remote Sens.33, 481–486. doi: 10.1109/TGRS.1995.8746029
61
NevavuoriP.NarraN.LinnaP.LippingT. (2020). Crop yield prediction using multitemporal UAV data and spatio-temporal deep learning models. Remote Sens.12, 4000. doi: 10.3390/rs12234000
62
PageM. J.McKenzieJ. E.BossuytP. M.BoutronI.HoffmannT. C.MulrowC. D.et al. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. Bmj372, n71. doi: 10.1136/bmj.n71
63
ParanjothiA. (2019). Pest detection and identification by applying color histogram and contour detectionby Svm model.
64
PeraltaN. R.AssefaY.DuJ.BardenC. J.CiampittiI. A. (2016). Mid-season high-resolution satellite imagery for forecasting site-specific corn yield. Remote Sens.8, 848. doi: 10.3390/rs8100848
65
PuX.YangD.GongC.ZhuF.ZhouR. (2025). Bridging lab and field: A review and roadmap for unmanned aerial vehicle-based field crop counting with deep learning. Smart. Agric. Technol.12, 101639. doi: 10.1016/j.atech.2025.101639
66
QuH.ZhengC.JiH.BaraiK.ZhangY.-J. (2024). A fast and efficient approach to estimate wild blueberry yield using machine learning with drone photography: Flight altitude, sampling method and model effects. Comput. Electron. Agric.216, 108543. doi: 10.1016/j.compag.2023.108543
67
RajM.N BH.GuptaS.AtiquzzamanM.RawlleyO.GoelL. (2024). Leveraging precision agriculture techniques using UAVs and emerging disruptive technologies. Energy Nexus.14, 100300. doi: 10.1016/j.nexus.2024.100300
68
RenP.LiH.HanS.ChenR.YangG.YangH.et al. (2023). Estimation of soybean yield by combining maturity group information and unmanned aerial vehicle multi-sensor data using machine learning15, 4286. doi: 10.3390/rs15174286
69
SaraviaD.SalazarW.Valqui-ValquiL.Quille-MamaniJ.Porras-JorgeR.CorredorF.-A.et al. (2022). Yield predictions of four hybrids of maize (Zea mays) using multispectral images obtained from UAV in the coast of Peru. Agronomy12, 2630. doi: 10.3390/agronomy12112630
70
ShafiU.MumtazR.García-NietoJ.HassanS. A.ZaidiS. A.IqbalN. (2019). Precision agriculture techniques and practices: From considerations to applications. Sensors19, 3796. doi: 10.3390/s19173796
71
ShammiS. A.HuangY.FengG.TewoldeH.ZhangX.JenkinsJ.et al. (2024). Application of UAV multispectral imaging to monitor soybean growth with yield prediction through machine learning. Agronomy14 (4), 672. doi: 10.3390/agronomy14040672
72
SkobalskiJ.SaganV.AlifuH.Al AkkadO.LopesF. A.GrignolaF. (2024). Bridging the gap between crop breeding and GeoAI: Soybean yield prediction from multispectral UAV images with transfer learning. ISPRS. J. Photogramm. Remote Sens.210, 260–281. doi: 10.1016/j.isprsjprs.2024.03.015
73
SnyderH. (2019). Literature review as a research methodology: An overview and guidelines. J. Business. Res.104, 333–339. doi: 10.1016/j.jbusres.2019.07.039
74
SudduthK.DrummondS.MyersD. B. (2012). “ Yield editor 2.0: Software for automated removal of yield map errors”, in: 2012 ASABE Annual International Meeting (St. Joseph, MI: American Society of Agricultural and Biological Engineers).
75
SunojS.ChoJ.GuinnessJ.van AardtJ.CzymmekK. J.KetteringsQ. M. (2021). Corn grain yield prediction and mapping from unmanned aerial system (UAS) multispectral imagery. Remote Sens.13 (19), 3948. doi: 10.3390/rs13193948
76
TanabeR.MatsuiT.TanakaT. S. T. (2023). Winter wheat yield prediction using convolutional neural networks and UAV-based multispectral imagery. Field Crops Res.291, 108786. doi: 10.1016/j.fcr.2022.108786
77
TaoH.FengH.XuL.MiaoM.YangG.YangX.et al. (2020). Estimation of the yield and plant height of winter wheat using UAV-based hyperspectral images. Sensors20, 1231. doi: 10.3390/s20041231
78
TianZ.ZhangY.LiuK.LiZ.LiM.ZhangH.et al. (2022). UAV remote sensing prediction method of winter wheat yield based on the fused features of crop and soil. Remote Sens.14, 5054. doi: 10.3390/rs14195054
79
WanL.CenH.ZhuJ.ZhangJ.ZhuY.SunD.et al. (2020). Grain yield prediction of rice using multi-temporal UAV-based RGB and multispectral images and model transfer – a case study of small farmlands in the South of China. Agric. For. Meteorol.291, 108096. doi: 10.1016/j.agrformet.2020.108096
80
WangJ.WangP.TianH.TanseyK.LiuJ.QuanW. (2023). A deep learning framework combining CNN and GRU for improving wheat yield estimates using time series remotely sensed multi-variables. Comput. Electron. Agric.206, 107705. doi: 10.1016/j.compag.2023.107705
81
XiangY. Z. A.J.Q.ZhaoX.JinL.LiZ. J.ZhangF. L. (2023). Estimation of soybean growth parameters and yield using UAV-based multispectral remote sensing. Trans. Chin. Soc. Agric. Machinery.54, 230–239. doi: 10.6041/j.issn.1000-1298.2023.08.022 (in Chinese)
82
XieC.YangC. (2020). A review on plant high-throughput phenotyping traits using UAV-based sensors. Comput. Electron. Agric.178, 105731. doi: 10.1016/j.compag.2020.105731
83
XueJ.SuB. (2017). Significant remote sensing vegetation indices: A review of developments and applications. J. sensors.2017, 1353691. doi: 10.1155/2017/1353691
84
YamaguchiT.TakamuraT.TanakaT. S. T.OokawaT.KatsuraK. (2025). A study on optimal input images for rice yield prediction models using CNN with UAV imagery and its reasoning using explainable AI. Eur. J. Agron.164, 127512. doi: 10.1016/j.eja.2025.127512
85
YangS.HuL.WuH.RenH.QiaoH.LiP.et al. (2021). Integration of crop growth model and random forest for winter wheat yield estimation from UAV hyperspectral imagery. IEEE J. Sel. Top. Appl. Earth Obs. Remote Sens.14, 6253–6269. doi: 10.1109/JSTARS.2021.3089203
86
YangS.LiL.FeiS.YangM.TaoZ.MengY.et al. (2024). Wheat yield prediction using machine learning method based on UAV remote sensing data. Drones8, 284. doi: 10.3390/drones8070284
87
YangB.ZhuW.RezaeiE. E.LiJ.SunZ.ZhangJ. (2022). The optimal phenological phase of maize for yield prediction with high-frequency UAV remote sensing. Remote Sens.14, 1559. doi: 10.3390/rs14071559
88
YouJ.LiX.LowM.LobellD.ErmonS. (2017). “ Deep Gaussian process for crop yield prediction based on remote sensing data”, in: Proceedings of the Thirty-First AAAI Conference on Artificial Intelligence (San Francisco, California, USA: AAAI Press).
89
YueJ.YangG.LiC.LiZ.WangY.FengH.et al. (2017). Estimation of winter wheat above-ground biomass using unmanned aerial vehicle-based snapshot hyperspectral sensor and crop height improved models. Remote Sens.9, 708. doi: 10.3390/rs9070708
90
YueJ.YangG.TianQ.FengH.XuK.ZhouC. (2019). Estimate of winter-wheat above-ground biomass based on UAV ultrahigh-ground-resolution image textures and vegetation indices. ISPRS. J. Photogramm. Remote Sens.150, 226–244. doi: 10.1016/j.isprsjprs.2019.02.022
91
ZengL.PengG.MengR.ManJ.LiW.XuB.et al. (2021). Wheat yield prediction based on unmanned aerial vehicles-collected red–green–blue imagery. Remote Sens.13 (15), 2937. doi: 10.3390/rs13152937
92
ZhangP.ChenZ.MaS.YinD.JiangH. (2021). Prediction of soybean yield by using RGB model with skew distribution pattern of canopy leaf color. Nongye. Gongcheng. Xuebao/Transact. Chin. Soc. Agric. Eng.37, 120–126. doi: 10.11975/j.issn.1002-6819.2021.09.014
93
ZhangX.ZhaoJ.YangG.LiuJ.CaoJ.LiC.et al. (2019). Establishment of plot-yield prediction models in soybean breeding programs using UAV-based hyperspectral remote sensing. Remote Sens.11. doi: 10.3390/rs11232752
94
ZhangM.ZhouJ.SudduthK. A.KitchenN. R. (2020). Estimation of maize yield and effects of variable-rate nitrogen application using UAV-based RGB imagery. Biosyst. Eng.189, 24–35. doi: 10.1016/j.biosystemseng.2019.11.001
95
ZhengH.JiW.WangW.LuJ.LiD.GuoC.et al. (2022). Transferability of models for predicting rice grain yield from unmanned aerial vehicle (UAV) multispectral imagery across years, cultivars and sensors. Drones6 (12), 423. doi: 10.3390/drones6120423
96
ZhouW.SongC.LiuC.FuQ.AnT.WangY.et al. (2023). A prediction model of maize field yield based on the fusion of multitemporal and multimodal UAV data: A case study in Northeast China. Remote Sens.15 (14), 3483. doi: 10.3390/rs15143483
97
ZhouJ.ZhouJ.YeH.AliM. L.ChenP.NguyenH. T. (2021). Yield estimation of soybean breeding lines under drought stress using unmanned aerial vehicle-based imagery and convolutional neural network. Biosyst. Eng.204, 90–103. doi: 10.1016/j.biosystemseng.2021.01.017
Summary
Keywords
crop yield prediction, ground-truth yield, spatial scale, spatiotemporal modeling, UAV remote sensing
Citation
Zhao P, Li W, Wang C, Wang B, Yang T, Wang X, Liu Z, Liu H and Wang F (2026) UAV remote sensing for yield prediction in staple crops: a review. Front. Plant Sci. 17:1840669. doi: 10.3389/fpls.2026.1840669
Received
27 March 2026
Revised
03 June 2026
Accepted
18 June 2026
Published
14 July 2026
Volume
17 - 2026
Edited by
Praveen Guleria, DAV University, India
Reviewed by
Zhenping Qiang, Southwest Forestry University, China
Xiaojun Pu, Chongqing Academy of Agricultural Sciences, China
Updates
Copyright
© 2026 Zhao, Li, Wang, Wang, Yang, Wang, Liu, Liu and Wang.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Chao Wang, wangchao@hebau.edu.cn; Fushun Wang, xxwfsh@hebau.edu.cn; Hongquan Liu, lhq@hebau.edu.cn
†These authors have contributed equally to this work
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.