AUTHOR=Knafo Yakir , Zhou Yinjie , Manor Avi , Osovizky Alon , Riemer Raziel 

TITLE=Toward an active exoskeleton with full energy autonomy

JOURNAL=Frontiers in Robotics and AI

VOLUME=Volume 12 - 2025

YEAR=2025

URL=https://www.frontiersin.org/journals/robotics-and-ai/articles/10.3389/frobt.2025.1597271

DOI=10.3389/frobt.2025.1597271

ISSN=2296-9144

ABSTRACT=Exoskeletons aim to enhance human performance and reduce physical fatigue. However, one major challenge for active exoskeletons is the need for a power source. This demand is typically met with batteries, which limit the device’s operational time. This study presents a novel solution to this challenge: a design that enables the generation of electricity during motions where the muscles work as brakes and absorb energy, with the energy stored and subsequently returned to assist when the muscles function as motors. To achieve this goal, a knee exoskeleton design with a direct drive and a novel electronic board was designed and manufactured to capture the energy generated by the wearer’s movements and convert it into electrical energy. The harvested energy is stored in a power bank, and later, during motion, this energy is used to power the exoskeleton motor. Further, the device has torque control and can change the assistive profile and magnitude as needed for different assistance scenarios. Sit-to-stand (STS) motion was chosen as a test case for the first exoskeleton prototype. It was found that, during lowering (from stand to sit), the exoskeleton provided up to 10 Nm and harvested 9.4 J. During rising (from sit to stand), it provided up to 7.6 Nm and was able to return 6.8 J of the harvested energy. Therefore, the cycle efficiency of the exoskeleton system (return divided by harvesting) is 72.3%. In summary, this study introduces the first active exoskeleton for STS that can generate its own electrical power. The results show that the full development of this technology could reduce exoskeletons’ need for external energy sources.