Buddhima Indraratna and Jim Grant were inadvertently omitted as authors in the published article. The corrected Author Contributions Statement and Affiliations appear below:
The following affiliation for the 2nd author Buddhima Indraratna was added: “Transport Research Centre, University of Technology, Sydney, NSW, Australia. Formerly worked at ARC Industrial Transformation Training Centre, ITTC-Rail, c/o University of Wollongong, Wollongong, NSW, Australia.”
The following affiliation for the 3rd author Jim Grant were added as “Ecoflex International Pty Ltd, Avoca Beach, NSW, Australia.”
The corrected Author Contributions Statement appears below:
BI had provided very critical and constructive review comments at different stages of this work, and was the project leader of this sponsored industry-based research. JG had participated in discussions and provided inspirational comments at various stages of this work, and his company EcoFlex has already put to practice the rubber-tyer assembly concept in numerous Australian road projects. QS approved the article for publication.
Furthermore, in the original article, there was an error in the acknowledgments section. Funding and an acknowledgments of contributions of additional researchers have been added. The following correction has been made:
“The first author formerly worked as an Associate Research Fellow at University of Wollongong. The authors acknowledge the financial assistance provided by the NSW Environmental Trust, TSA, Ecoflex International Pty Ltd and University of Wollongong. The original concept of tyer assembly for roads was an invention by EcoFlex. The authors are thankful to Dr. Trung Ngo and Dr. Ana Heitor for their valuable review comments to this paper. Assistance of A/Prof. Cholachat Rujikiatkamjorn at various times during this project is also appreciated. Contributions from Dr. Mahdi Biabani through similar conceptual research based on geocell reinforced tracks under the guidance of Distinguished Professor Indraratna supported by EcoFlex also inspired this particular study.”
The Conflict of Interest statement has also been updated to reflect the addition affiliation of Ecoflex International Pty Ltd. The new Conflict of Interest statement reads as follows: “QS was employed by the company Coffey Services Australia Pty Ltd. JG was employed by the company Ecoflex International Pty Ltd.
The remaining author declares that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.”
The authors apologize for these errors and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Summary
Keywords
track dynamics, finite-element modeling, vibration, reinforced soils, capping layer, scrap tire
Citation
Sun Q, Indraratna B and Grant J (2020) Corrigendum: Numerical Simulation of the Dynamic Response of Ballasted Track Overlying a Tire-Reinforced Capping Layer. Front. Built Environ. 6:115. doi: 10.3389/fbuil.2020.00115
Received
10 June 2020
Accepted
22 June 2020
Published
07 August 2020
Approved by
Frontiers Editorial Office, Frontiers Media SA, Switzerland
Volume
6 - 2020
Updates
Copyright
© 2020 Sun, Indraratna and Grant.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Qideng Sun Peter.Sun@Coffey.com
This article was submitted to Transportation and Transit Systems, a section of the journal Frontiers in Built Environment
†Formerly worked as an Associate Research Fellow at University of Wollongong, Australia
‡Formerly worked at ARC Industrial Transformation Training Centre, ITTC-Rail, c/o University of Wollongong, Wollongong, NSW, Australia
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.