ORIGINAL RESEARCH article
Front. Built Environ.
Sec. Sustainable Design and Construction
This article is part of the Research TopicAdvances in Construction Innovation and Climate-Responsive Strategies: Implications for a Sustainable and Resilient Built EnvironmentView all articles
Designing More-Than-Human Thermal Comfort: Bio-Inspired Evaporative Cooling in Porous Facade Components for Cavity-Nesting Wild Bees
Provisionally accepted
- University of Stuttgart, Stuttgart, Germany
Select one of your emails
You have multiple emails registered with Frontiers:
Notify me on publication
Please enter your email address:
If you already have an account, please login
You don't have a Frontiers account ? You can register here
Urban surfaces such as Facades and rooftops are critical mediators of microclimatic conditions in cities, influencing the thermal comfort of both human and non-human inhabitants. Within a more-than-human design perspective, these surfaces may be understood as interfaces where microclimatic regulation can support ecologically relevant funtions, including nesting habitats that moderate microclimatic extremes for wild bee species in dense urban environments. This study builds on prior research into additive-manufactured (3D-printed) porous cellular geometries—specifically Triply Periodic Minimal Surfaces (TPMS) and Adaptive Density Minimal Surfaces (ADMS)—developed as structural envelopes for nesting tubes intended to mitigate heat peaks experienced by cavity-nesting wild bees under urban heat island (UHI) conditions. These species experience metabolic stress when internal cavity temperatures (Tₙₑₛₜ) exceed 35 °C and face lethal risks above 40 °C. Previous experiments showed that such geometries can attenuate internal temperature fluctuations by up to 1.6 K compared with conventional materials, although passive geometric performance alone proved insufficient during extreme summer conditions. To enhance thermal regulation, a bio-inspired evaporative-cooling strategy was developed, modelled after the droplet collection and retention behaviour of Apis mellifera. Here, the honeybee is used solely as a biological analogue for water-management mechanisms, rather than as the species under investigation. Comparative field tests in Stuttgart, Germany, evaluated small-scale water-supplied (sWS) and control (sC) samples alongside traditional nesting materials. There resultsinformed the design of full-scale Facade panels—a water-supplied (pWS) and a control (pC) variant—later tested in a climatic chamber simulating heatwave conditions. Across experiments, pWS achieved mean temperature differentials (ΔT) of 8.6–10.2 K relative to pC, indicating the technical potential of evaporative cooling to reduce microclimate thermal stress in biologically sensitive cavities and to inform climate-responsive architectural surface design.
Keywords: Architectural microclimate, Biomimetic Facades, Cavity-nesting wild bees, Climate-adaptive design, Evaporative cooling, More-than-human design, Multispecies architecture, Urban heat mitigation
Received: 20 Nov 2025; Accepted: 26 Jan 2026.
Copyright: © 2026 Valverde Rojas, Kimmich, Österreicher, Fischer and Knippers. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence: Maria Claudia Valverde Rojas
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.