ORIGINAL RESEARCH article
Front. Water
Sec. Water and Built Environment
Volume 7 - 2025 | doi: 10.3389/frwa.2025.1661148
Leak Detection in Water Supply Networks Using Inverse Transient Analysis in Time and Frequency Domain: A Comparative Investigation
Provisionally accepted
- 1Shahid Chamran University of Ahvaz, Ahvaz, Iran
- 2Rheinland-Pfalzische Technische Universitat Kaiserslautern-Landau, Kaiserslautern, Germany
Select one of your emails
You have multiple emails registered with Frontiers:
Notify me on publication
Please enter your email address:
If you already have an account, please login
You don't have a Frontiers account ? You can register here
This paper compares the inverse transient analysis (ITA) in the frequency domain (FITA) with its counterpart in the time domain (TITA) for leak detection and calibration of looped water supply networks (WSNs). The leak detection results demonstrate that both FITA and TITA achieve 100% accuracy in predicting leak location and size for the case study. However, FITA exhibits superior computational efficiency, converging twice as fast as TITA. Regarding the calibration performance, TITA demonstrates higher precision in estimating pipe friction factors, with an overall average error of 0.019%. In comparison, FITA achieves an average error of 4.14%, due to the linearization of the friction loss formula. It is also noteworthy that the high sensitivity of FITA to leak parameters allows for reliable leak detection even without simultaneous calibration of the friction factor. In fact, the impacts of leaks and frictional losses are nearly separable in the frequency domain. Furthermore, the novel dominant frequencies (DFs) method provides direct leak detection through frequency response analysis, while the Decision Table Method (DTM) optimizes measurement site placement with reduced computational overhead. Uncertainty analysis confirms FITA's robustness to friction factor variations within reasonable ranges, making it particularly suitable for large or complex WSNs where computational efficiency is paramount.
Keywords: Leak detection, Calibration, Pipe network, Inverse transient analysis, frequency domain, time domain, Dominant frequencies
Received: 07 Jul 2025; Accepted: 09 Sep 2025.
Copyright: © 2025 Ranginkaman, Haghighi, E. Bakhshipour, Krumke and Dittmer. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence: Amin E. Bakhshipour, amin.bakhshipour@gmail.com
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.