In the published article, there was an error in Figure 1 as published. Panels C and D of Figure 1 have been erroneously swapped. The corrected Figure 1 with its unchanged caption appear below.
Figure 1
Intraoperative procedure for pull-through DMEK. (A) Insertion of the cartridge into the anterior chamber through a clear cornea incision. (B) Grasping and pulling-through of graft with forceps. (C) Natural unfolding of the graft with endothelium-down. (D) Injection of gas to tamponade the donor graft to the recipient cornea.
The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Summary
Keywords
Descemet membrane endothelial keratoplasty (DMEK), clinical outcomes, graft survival, surgical techniques, pull-through, endothelium-in
Citation
Cheong EZK, Ng Yin Ling C, Wong QY, Chua CSQ, Htoon HM and Ang M (2025) Corrigendum: Clinical outcomes of DMEK comparing endothelium-out injector and endothelium-in pull-through techniques in Asian eyes. Front. Med. 12:1624456. doi: 10.3389/fmed.2025.1624456
Received
07 May 2025
Accepted
09 June 2025
Published
24 June 2025
Volume
12 - 2025
Edited and reviewed by
Massimo Busin, University of Ferrara, Italy
Updates
Copyright
© 2025 Cheong, Ng Yin Ling, Wong, Chua, Htoon and Ang.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Marcus Ang marcus.ang@snec.com.sg
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.