ORIGINAL RESEARCH article
Front. Bioeng. Biotechnol.
Sec. Biomechanics
Volume 13 - 2025 | doi: 10.3389/fbioe.2025.1550228
Study on the Characterization of Adult Chinese Dura Mater Material Properties Based on Uniaxial Tensile Testing
Provisionally accepted- 1School of Forensic Medicine, Guizhou Medical University, Guiyang, Guizhou, China
- 2Shanghai Key Laboratory of Forensic Medicine, Academy of Forensic Science, Shanghai, China
- 3Hunan University of Science and Technology, Xiangtan, Hunan Province, China
Select one of your emails
You have multiple emails registered with Frontiers:
Notify me on publication
Please enter your email address:
If you already have an account, please login
You don't have a Frontiers account ? You can register here
This study investigated the biomechanical properties of the dura mater from 29 Chinese adult donors (20 -86 years), focused on the influence of age, anatomical region, sex and loading direction, to establish Chinese population -specific material parameters for cranial finite element (FE) models and enhance forensic traumatic brain injury analysis. In this study, a total of 275 dural specimens were prepared and categorized into young adult (20-44 years), middle aged (45-64 years), and elderly (≥65 years) cohorts. Samples were excised from frontal, temporal, parietal and occipital regions and tested uniaxially in sagittal and coronal directions, with strain measured via digital image correlation (DIC) techniques. True stress-strain curves were fitted to the Raghavan model to determine elastic fiber modulus (EE), collagen fiber modulus (EC), failure stress (σTf ), and failure strain (εTf); ultimate tensile force (MaxForce) was also recorded. Histological analysis assessed age-related microstructural changes. Results indicated significant age-related degradation: EC, σTf, εTf; and MaxForce significantly decreased with age (median EC declined from 28.0 MPa in young adults to 15.3 MPa in the elderly, P < 0.05; median εTf from 0.215 to 0.156, P < 0.05), while EE showed no significant age correlation (P=0.10). Significant regional variance were observed, with the parietal region exhibiting higher EE (P=0.01) and σTf (P=0.03) compared to the occipital region; εTf showed no significant regional differences (P=0.12). Dura mater demonstrated clear anisotropy: sagittal loading yielded significantly higher median EC (27.0 MPa vs. 18.1 MPa coronal, P=0.003), σTf (4.30 MPa vs. 3.18 MPa coronal, P=0.020), and MaxForce (12.9 N vs. 10.3 N coronal, P=0.014). No statistically significant sex-based differences were found for any parameter (P > 0.05). Histology confirmed progressive age-related collagen disorganization and elastic fiber degradation. In conclusion, Chinese adult dura mater exhibits significant age-dependent decline in mechanical integrity, clear anisotropy favoring the sagittal direction, and notable regional heterogeneity, but no significant sex-based differences. These findings provide crucial, population-specific data for improving the biofidelity of FE head models and forensic injury analysis.
Keywords: Dura mater1, biomechanics2, Material properties3, craniocerebral injury4, forensics5
Received: 23 Dec 2024; Accepted: 15 Jul 2025.
Copyright: © 2025 Cai, Wang, Liu, Deng, Fan, Zhang, Huang, Wan, Zou and Li. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence:
Changwu Wan, School of Forensic Medicine, Guizhou Medical University, Guiyang, 550004, Guizhou, China
Donghua Zou, School of Forensic Medicine, Guizhou Medical University, Guiyang, 550004, Guizhou, China
Zhengdong Li, Shanghai Key Laboratory of Forensic Medicine, Academy of Forensic Science, Shanghai, China
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.