Skip to main content

ORIGINAL RESEARCH article

Front. Bioeng. Biotechnol., 31 August 2015
Sec. Biomechanics

Erratum: The use of collision detection to infer multi-camera calibration quality

  • Frontiers Production Office, Frontiers, Switzerland

An erratum on

The use of collision detection to infer multi-camera calibration quality
by Chong, S.-Y, Dorow, B., Ramasamy, E., Dennerlein, F, and Röhrle, O. Front. Bioeng. Biotechnol. (2015) 3:65. doi:10.3389/fbioe.2015.00065

Reason for Erratum

Due to an oversight, the name of the author Oliver Röhrle was published as Oliver Röehrle instead of Oliver Röhrle. This mistake does not change the scientific conclusions of the article in any way.

The publisher apologizes for this error.

Original article has been updated.

Keywords: error analysis, collision detection, camera calibration, accuracy, kinematics

Citation: Frontiers Production Office (2015) Erratum: The use of collision detection to infer multi-camera calibration quality. Front. Bioeng. Biotechnol. 3:134. doi: 10.3389/fbioe.2015.00134

Received: 20 August 2015; Accepted: 20 August 2015;
Published: 31 August 2015

Approved by:

Bioengineering and Biotechnology, Editorial Office, Frontiers, Switzerland

Copyright: © 2015 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Production Office, production.office@frontiersin.org

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.