In the published article, Affiliations 2 and 3 were switched. Affiliation 2 should be “Affiliated Hospital of Youjiang Medical University for Nationalities, Baise, China,” whereas Affiliation 3 should be “State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China.”
The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Summary
Keywords
biological high-entropy, compositon design, mechanical properties, implant, biocompatibility
Citation
Feng J, Tang Y, Liu J, Zhang P, Liu C and Wang L (2022) Corrigendum: Bio-high entropy alloys: Progress, challenges, and opportunities. Front. Bioeng. Biotechnol. 10:1091752. doi: 10.3389/fbioe.2022.1091752
Received
07 November 2022
Accepted
08 November 2022
Published
18 November 2022
Approved by
Frontiers in Editorial Office, Frontiers Media SA, Switzerland
Volume
10 - 2022
Updates
Copyright
© 2022 Feng, Tang, Liu, Zhang, Liu and Wang.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Yujin Tang, tangyujin@ymcn.edu.cn; Jia Liu, liujia@ymcn.edu.cn; Peilei Zhang, peilei@sues.edu.cn
This article was submitted to Biomaterials, a section of the journal Frontiers in Bioengineering and Biotechnology
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.