- 1Faculty of Life and Health Sciences, School of Biomedical Sciences, University of Ulster, Coleraine, UK
- 2Center for Advanced Studies in Materials Science and Condensed Matter Physics, Department of Physics, Savitribai Phule Pune University, Pune, India
- 3Institute of Microbial Technology, Chandigarh, India
- 4Department of Biotechnology, Savitribai Phule Pune University, Pune, India
- 5Department of Zoology, Sir Parashurambhau College, Pune, India
Diverse types of microbial surface active amphiphilic molecules are produced by a range of microbial communities. The extraordinary properties of biosurfactant/bioemulsifier (BS/BE) as surface active products allows them to have key roles in various field of applications such as bioremediation, biodegradation, enhanced oil recovery, pharmaceutics, food processing among many others. This leads to a vast number of potential applications of these BS/BE in different industrial sectors. Despite the huge number of reports and patents describing BS and BE applications and advantages, commercialization of these compounds remain difficult, costly and to a large extent irregular. This is mainly due to the usage of chemically synthesized media for growing producing microorganism and in turn the production of preferred quality products. It is important to note that although a number of developments have taken place in the field of BS industries, large scale production remains economically challenging for many types of these products. This is mainly due to the huge monetary difference between the investment and achievable productivity from the commercial point of view. This review discusses low cost, renewable raw substrates, and fermentation technology in BS/BE production processes and their role in reducing the production cost.
Introduction
Our daily routine basic activities are mostly dependent on the use of some kind of surfactants or emulsifiers including toothpaste, personal hygiene, cosmetic products, and other pharmaceutical by-products, most of which contains surfactants and emulsifier as one of their ingredients. The market for such products is therefore huge and demands are ever increasing. However, due to the non-biodegradability, ability to accumulate and toxicity of some of the chemical petroleum based product to the environment, there has been a general desire to find replacement surfactants to the chemically synthesized compounds with biological products (Satpute et al., 2010a,b; Marchant and Banat, 2012a,b). Such biological biosurfactant/bioemulsifiers (BS/BEs) are mainly of microbial origin and are generally more environmental friendly benign products.
Biosurfactants and bioemulsifiers amphiphilic surface active abilities which are due to the presence of hydrophobic and hydrophilic moieties within their molecules which allows them to aggregate at interfaces (between immiscible liquids, for example water and oil). BS/BE reduce surface and interfacial tension (IFT) in liquids or different phases of matter, like gas, liquid, and solid. Such properties play an important role in various fields like bioremediation, biodegradation, oil recovery, food, pharmaceutics, and many other applications in different industrial sectors (Cameotra and Makkar, 2004; Banat et al., 2010; Fracchia et al., 2014; Franzetti et al., 2014). The structural and functional novelty of such surface active molecules is attracting the attention of many researchers throughout the world. Their synthesis processes take place on water soluble and insoluble substrates by de novo pathway and/or assembly from other substrates (Satpute et al., 2010c).
The use of cheaper, renewable substrates from various industries such as agricultural (sugars, molasses, plant oils, oil wastes, starchy substances, lactic whey), distillery wastes, animal fat, oil industries have been reported and reviewed thoroughly by several researchers (Makkar et al., 2011). Various cheaper substrates such as soybean oil not only act as nutrients for the microbial growth but also act as an important source for isolation of potential BS producing microorganisms (Guerra-Santos et al., 1986; Lee et al., 2008). Rhamnolipids (RHL), one of the common BSs are usually produced on soybean oil soapstock, spent soybean oil, or chicken fat as a carbon source (Nitschke et al., 2004, 2005, 2010). Improvement in the fermentation technology, strain selection and use of cheaper, renewable substrates have a vital role in enhancing the production processes of BS industries (Marchant and Banat, 2012b; Marchant et al., 2014). However, large scale production for most microbial surface active agents has not reached a satisfactory economical level due to their low yields. In addition to this, high cost input is required for downstream processing to recover and purify microbial surfactants (Rodrigues et al., 2006a,b; Smyth et al., 2010a,b). Such obstacles may be overcome by isolating potential BS/BE producers that can use the renewable substrates to raise the quality as well as quantity of BS. We can make use of waste material as better substrates for BS/BE production. Several alternative strategies for production at commercial scale have been reviewed by Helmy et al. (2011).
This review aims to provide comprehensive information on various economical, renewable substrates that are used for production of BS and how these substrates have can support BS fermentation technology. We also give a brief glance on the kinetics of BS production and fermentation technology that has been improved since last two decades.
Need for Cheaper, Renewable Substrates in Biosurfactant Industry
Most biotechnological products processes need high monetary inputs and securing an optimum yield of product at the lowest expense through usage of low cost material (Cazetta et al., 2005). However, very low quantities of surface active agents are usually produced by microorganisms and the downstream processing of biotechnological products costs ~60–80% of the total production expenditure. This is why most of the marketable products based on BS and BE are quite expensive. Therefore, it essential to reduce the production costs of BS/BE through the use of inexpensive and renewable substrates (Desai and Banat, 1997; Banat et al., 2000; Makkar et al., 2011). A diversity of carbon (water soluble and water insoluble) and nitrogen sources have been used for BS production which may consequently vary in structure or production site within the cell (intra or extra cellular, cell associated) depending upon the substrate composition particularly the carbon source (Guerra-Santos et al., 1986; Fiechter, 1992). In addition to usual water soluble carbon sources, a variety of unusual carbon sources such as ethanol, blended gasoline, hydrocarbons like heptadecane, hexadecane etc. have been used (Shreve et al., 1995; Patricia and Jean-Claude, 1999; Prabhu and Phale, 2003; Cunha et al., 2004).
Increased public awareness of issues related to environmental pollution strongly influences the development of technologies that facilitates cleaning hazardous contaminants. This has given imputes for finding suitable cheap BS products that can be used in the treatment of such contaminations. Kapadia and Yagnik (2013) introduced an alternative approach using solid state fermentation to obtain a more economical viable production process worth implementing on a commercial scale. Some of the suggested strategies included the use of more cheaper materials, optimization of environmental conditions and screening for overproducing strain to attain the maximize productivity (Satpute et al., 2008). The efforts taken toward this direction are significant to claim BSs as the molecules of the future. It is important to note that the results obtained to date show encouraging potentials to drive a beginning for the BS production industry.
Use of Cost Effective Renewable Substrates for Biosurfactant Production
Different relatively cheap and abundant substrates are currently available for use as carbon sources from various industrial sectors (Table 1). Many of these substrates have been reported as suitable substrates for growth and production of a wide range of microbial amphiphilic molecules (see Tables Tables 2 and 3). These substrates are described in detail as follows.
TABLE 1. Summary of various cheaper/renewable substrates available from different industrial sectors.
TABLE 2. Summary of various renewable substrates used for production of microbial amphiphilic molecules by Acinetobacter, Bacillus, and Candida sp.
TABLE 3. Summary of various renewable substrates used for production of microbial amphiphilic molecules by Pseudomonas and other strains.
Agro-Industrial Waste, Crops Residues
Products such as bran, straw of wheat, straw of rice, hull of soy, corn, rice, sugar cane molasses, beet molasses, bagasse of sugarcane, cassava flour and its wastewater are representative candidates of agro-industrial waste (Nitschke et al., 2004; Rashedi et al., 2005a; Benincasa, 2007; Thavasi et al., 2014). Some waste material like rice water (by-product from domestic cooking and rice processing industry), corn steep liquor (corn processing industry) and cereals, pulses processed waste water are rich in starch content. Agro-industrial waste contains high amount of carbohydrates, lipids and hence, can be used as a rich carbon source for microbial growth. Among the agro-industrial waste products, molasses had attracted considerable attention by many researchers.
Molasses are concentrated syrups by-products of sugar cane and beet processing industries. This cheap substrate contains 75% dry matter, 9–12% non-sugar organic matter, 2.5% protein, 1.5–5.0% potassium and ≈1% calcium, magnesium, and phosphorus. Other components like biotin, pantothenic acid, inositol, and thiamine at 1–3% are also present giving it a thick, dark brown colored appearance. The high sugar content ranging approximately between 48 and 56% represents a good substrate for growth as well as production of microbial bioactive compounds for various microorganisms. When molasses are used as substrate, it needs to be clarified otherwise some of the components from molasses itself may impart unfavorable color to the desired products reducing their quality (Raza et al., 2007a,b). Molasses clarification process, however, can be quite costly as it involves dilution with water, acidification, pH adjustment to 7.0 using CaO powder and addition of K4Fe(CN)6 as a coagulant is carried out. During this process, heating up to 90°C for 1 h and cooling overnight at room temperature permits settlement of suspended solids and fibrous particles which can be removed by centrifugation (Raza et al., 2007a,b).
Achieving cost effective BS production depends on the development of cheaper processes and the provision of low cost substrate raw material. Most earlier research concentrated on Pseudomonas sp. and Bacillus species while using molasses, whey, CSL as carbon and energy sources (Makkar and Cameotra, 1997, 1999; Patel and Desai, 1997; Makkar et al., 2011). However, there is a threat that the commercial products may get contaminated with those cheaper substrates products that are used as raw materials for production process. When the pure products are not available, there is difficulty to use them for intended application purposes. Various industrially important products like citric acid, xanthan gum, baker’s yeast, acetone, alcohol, vitamins, amino acids, and organic acids are also produced successfully using molasses as a substrate.
India has an economy dependent on agro industries producing large volume of agro-industrial wastes which are mostly suitable for use as substrate. Some of the research laboratories are particularly involved in the use of molasses for production of various microbial metabolites. Makkar and Cameotra (1997) reported BS production from two Bacillus subtilis cultures in minimal medium supplemented with molasses as carbon source. Optimum BS production with good emulsification activity (EA) was achieved in late stationary phase. Patel and Desai (1997) also worked on production of RHL BS from Pseudomonas aeruginosa GS3 by using molasses and corn steep liquor. Molasses of 7% (v/v) and corn steep liquor of 0.5% (v/v) were appropriate for optimum BS production. Cells produced BS in the stationary phase with a rhamnose sugar concentration of 0.24 g/L. Joshi et al. (2008) also used molasses and other carbon sources to produce BSs from several Bacillus strains under thermophilic conditions.
At international level several researchers have contributed in this area. Raza et al. (2007a) produced RHL BS from P. aeruginosa mutant strains using blackstrap molasses with or without supplementary nitrogen source and reported a yield of 1.45 g/L RHL after 96 h incubation. Another interesting work contributed by Benincasa (2007) suggests that the RHL produced from agro industrial wastes has an important role for hydrocarbon biodegradation in contaminated soil. Such studies have proved the importance of agro industrial wastes in bioremediation processes. Onbasli and Aslim (2009) used sugar beet molasses for RHL BS production from Pseudomonas strains and showed that among 18 strains of Pseudomonas, P. luteola B17 and P. putida B12, gave high yield of RHL at 5% (w/v) molasses. Cultures isolated from oily sites also utilize sugar beet molasses effectively for BS production. Rashedi et al. (2006), reported RHL BS producing P. aeruginosa isolated from Iranian oil wells. They used waste dates as sole carbon for the production of RHL using fed-batch culture and reported improved yields of BS. It is important to note that yield of the BS production increases with the increased concentration of molasses; maximum production, however, was reported using a medium containing 7% (v/v) of molasses. Other than above mentioned sources of molasses (sugar cane and beet), soy molasses are the most commonly used wastes from industrial sectors in the production of sophorolipid (SL) type BSs (Deshpande and Daniels, 1995; Solaiman et al., 2007). Molasses produced during the production process of soybean oil have been reported as a good carbon sources for SLs type BS from Candida bombicola (Solaiman et al., 2004). About 21 g/L yield was obtained as compared with glucose and oleic acid (79 g/L) in fermentation process. Such studies may not show benefits in enhancing the yield of metabolite but may be useful ways to reduce the accumulation of waste disposals from oil industry.
Researchers have worked with various combinations of carbon and nitrogen sources in BS production technology. Joshi et al. (2008) used molasses along with cheese whey as substrate for BS production from Bacillus sp. At the temperature of 45°C, the strain shows maximum BS production using molasses at 5.0–7.0% (w/v). Similar reports on BSs produced from probiotic bacteria have also been described. Rodrigues et al. (2006b) carried out studies with two microbial cultures namely, Lactococcus lactis 53 and Streptococcus thermophilus for BS production with conventional synthetic medium. They reported maximum BS production of 0.8 g/L for S. thermophilus and 0.7 g/L for L. lactis 53. Molasses have been found to enhance the yield of BS when compared to other conventional synthetic media. Thus, authors have suggested that there is not only an increase in the (about 1.2–1.5 times) mass of BS per gram of cell dry weight but also about 60–80% reduction in medium preparation costs. Therefore, molasses has been proved as an alternative economical medium for commercial BS production processes.
Cost variation in commercial production process has been calculated for molasses and soybean oil used as substrates (Joshi et al., 2008). Although this work is reported long time back, it showed that the substrate alone would place the BS production cost at a competitive setting when compared to chemical surfactants such as alcohol ethoxylate and alkylphenoletoxylate types for use in enhanced oil recovery (EOR). The point here to be highlighted is when molasses are used as a substrate BS production becomes more expensive than the chemically synthesized surfactant. On the other hand, the sophorose lipids employed in cosmetics is valuable as compared to the use of the synthetic surfactant, for the same cosmetic application. Usually various agricultural wastes like barley bran, trimming vine shoots, corn cobs, and Eucalyptus globulus chips have been used for simultaneous lactic acid and BS production. Lactobacillus pentosus has been tried in BS fermentation process by using hemicellulosic hydrolyzates after nutrient supplementation. The highest value of reduction (21.3 units) was found when using hemicellulosic sugar hydrolyzates obtained from trimming vine shoots, that corresponds to 0.71 g of BS per gram of biomass and 25.6 g of lactic acid/L. Whereas, barley bran husk hydrolyzates produces 0.28 g of BS per g of biomass and 33.2 g of lactic acid/L (Moldes et al., 2007).
Animal Fat and Oil Industries as Substrates
Meat processing industries such as food and leather produces significant quantities of animal fat, tallow and lard. Demand for animal fats is considerably less than vegetable oils and much of it becomes a problem for utilization as well as for their disposal. In comparison with other renewable substrates, animal fat and oil has not been much explored (Figure 1). An alternative option for such products is using them as raw material or substrates for production of commercial imperative compounds. Animal fat has been reported to act as a stimulator for the production of SLs BS from C. bombicola yeast (Deshpande and Daniels, 1995). One of the main outcome of their investigation indicated that this yeast grows poorly in presence of fat alone in the production medium. Mixture of glucose (10% w/v) and fat (10% v/v), however, enhances the growth of the yeast and the production of SLs (120 g/L). Recently, Santos et al. (2013) reported maximum glycolipid BS production using animal fat combined with corn steep liquor as compared to other carbon sources using yeast Candida lipolytica UCP0988. They also reported the product to have uses in bioremediation, oil mobilization, and recovery.
FIGURE 1. Approximate percentage distribution for literature available on various renewable substrates used for biosurfactants production.
Production of BSs by fermentation of fats, oils, and their co-products has also been reported (Solaiman et al., 2003). Nitschke et al. (2010) carried out BS production by using soybean oil waste (manipueira), along with molasses, whey and cassava flour, as substrates. Their observation suggests that cassava flour wastewater as a promising source of nutrients for BS production. These cheaper substrates were compared with conventional medium for BS production. Among eleven isolates tested, eight cultures reduced the surface tension (SFT) to levels below 30 mN/m using manipueira as substrate. They reported improved growth on manipueira agar for several isolates suggesting a high growth capacity and concluded that manipueira represents a potential alternative culture medium for BS production.
Industrial wastes, corn steep liquor and ground-nut oil refinery residue were also reported as low cost nutrients for the production of glycolipid type BS from Candida sphaerica (UCP 0995). The strain successfully mobilizes and recovers about 95% of motor oil adsorbed on sand sample which has vast applications in bioremediation processes (Luna et al., 2012). Several contributions are reported on usage of refinery wastes for production of microbial products. Trichosporon mycotoxinivorans CLA2 is BE-producing yeast strain which was isolated from the dairy industry effluents on mineral minimal medium containing refinery waste. This refinery wastes consists of diatomaceous earth impregnated with esters of having high organic matter content. Like molasses, pre-treatment of refinery waste is therefore, necessary for subsequent disposal in to the environment. Very few types of BEs have been produced from these residues (Monteiro et al., 2012).
Dairy and Distillery Industries by-Products
Dairy industries produce large quantities of whey that includes, curd whey, whey waste, cheese whey, lactic whey, all of which are easily available as raw substrate for microbial production of metabolites (Dubey and Juwarkar, 2001, 2004; Makkar and Cameotra, 2002; Dubey et al., 2005; Rodrigues and Teixeira, 2008). High amount (about 75%) of lactose is present in the lactic whey. Other components like protein and organic acids, vitamins provide good sources for microbial growth and BS production (Maneerat, 2005). Interesting studies have been reported regarding cloning the gene Lac ZY for lactose utilizing capability from Escherichia coli into P. aeruginosa. The cloned strain of P. aeruginosa grew well on whey and produces some RHL (Koch et al., 1988). Kosaric et al. (1984) have suggested the multi-organism strategy to decrease the cost at the commercial scale.
Other than RHL, a glycolipid type BS, considerable work has been reported on SLs. SLs has been produced by a two-stage (Figure 2) process starting from deproteinized whey concentrate (DWC) by using Cryptococcus curvatus ATCC 20509 and C. bombicola ATCC 22214 (Otto et al., 1999). These researchers compared the products from one-stage processes, by using different lipid based substrates. Two-stage batch cultivation process suggested that various physicochemical and properties of the SLs are greatly influenced by different carbon sources and not by the cultivation conditions. The same research group (Daniel et al., 1998b) had worked on the strains mentioned above using whey concentrates alone and in combination with rapeseed oil for production of SLs using single step batch cultivation. They developed sterilization method for whey by a combination of cross flow and sterile filtration. C. bombicola ATCC 22214 produced high (280 g/L) yield of SLs. Surprisingly, Daniel et al. (1998b) reported that C. bombicola ATCC 22214 does not consume whey lactose while it grows on oil or the lipidic substrates for SLs production. Daniel et al. (1998a) had also worked on two-stage batch cultivation concept reporting high yields (422 g/L) of SLs production using substrates like whey concentrate and rapeseed oil. The group also had grown the oleaginous yeast C. curvatus ATCC 20509 on DWCs in the first stage where they noted that lactose was consumed completely and biomass as well as an intracellular triglyceride, so-called single-cell oil (SCO), were produced. Crude cell extract resulted from cell disruption and heat sterilization were used for growth as well as SLs production by the yeast C. bombicola in a second stage (Daniel et al., 1999). The authors also showed that starting from DWC (50 g/L lactose), in the two stage fermentation process resulted in 12 g/L of extracellular SLs. In this two stage type of process, they reported that neither the growth of C. bombicola nor the productivity of SL from SCO is affected by the concentration of whey. In spite the amount of oil was the overall limiting factor of the process. Such kind of problems can be overcome by the addition of cheap oils during the production phase, to allow achieving high yields of SLs.
FIGURE 2. Pictorial representation for one stage and two stage fermentation process for biosurfactant production. Several authors have used these approaches. We have constructed figure based on Daniel et al. (1999) experimental work.
Wastewaters generated by dairy industries contain large quantities of fats and oils which are to some extent difficult to degrade (Willey, 2001; Cammarota and Freire, 2006). Like molasses, refinery wastes, pretreatment or clarification process for wastewater is a costly process. Daverey et al. (2009) described a process to utilize such valuable bioproducts for SLs production using yeasts C. bombicola through supplementing with sugarcane molasses and soybean oil. They reported about 38.76 g/L of SL with the synthetic dairy wastewaters containing 50 g/L sugarcane and 50 g/L soybean oil. Thus, authors therefore suggested utilizing real dairy industry wastewater for both the production of SLs. In addition to the above reports, Babu et al. (1996) reported on RHL production batch kinetic using distillery and whey waste in comparison to synthetic medium. Both the specific growth rates (μmax) and specific product formation rates (Vmax) were comparatively better in both waste media than in the synthetic media. Thus, their studies have proved that industrial wastes from distillery and whey are resourceful substrates for BS production. Similar observations were reported by Babu et al. (1996) and Dubey and Juwarkar (2001) for RHL production from P. aeruginosa by utilizing distillery effluent and whey wastes. Dubey and Juwarkar (2004) demonstrated 0.91 and 0.92 g/L of BS and use of P. aeruginosa strain in reduction of the pollution load up to 85–90%.
Although using dairy and distillery waste for various BS productions is possible, difficulties may arise when attempting to purify or collect such products. BSs recovery methods are diverse and include solvent extraction, precipitation, crystallization, centrifugation, and foam fractionation (Satpute et al., 2010a). However, Dubey and Juwarkar (2004) suggested that the various purification mentioned above cannot be effectively employed when using distillery wastewater as a nutrient medium for BS production. They produced BSs using P. aeruginosa strain BS2 and distillery wastewater and suggested that the substrate imparted color to the produced products which had a non-esthetic appearance and was difficult to recover from the fermentation medium. Therefore, they extended a new downstream technique involving adsorption-desorption processes using wood-based activated carbon (WAC). Therefore, WAC is one of the most efficient adsorbent among adsorbing materials like silica gel, activated alumina and zeolite. Polar solvent like acetone were also found to be efficient in recovering up to 89% BS from WAC. The authors recommended that WAC can be reused for BS recovery up to three cycles. The contribution by Dubey and Juwarkar (2004) has provided new approach for continuous recovery of BS from fermented distillery waste and concentrated foam. Such techniques can reduce the cost involved in the solvent based purification methodology at the same time as providing efficient yield.
The use of distillery and whey waste as substrates for production of BSs is a useful recycling and reuse process. Babu et al. (1996) established maximum specific growth rates, specific product formation rates and proved to be superior to the synthetic medium. The provision of substrates from such wastes represents a huge contribution to future BS production industries. An exciting report has been published by Dubey et al. (2012) on distillery waste in combinations with curd whey waste, fruit processing waste and sugar industry effluent for growth and production of BS from newer microbes. They observed a positive impact of such combinations for BS production from Kocuria turfanesis strain BS-J and P. aeruginosa strain BS-P. The authors have suggested that we can replace precious water with other wastes required for diluting distillery waste for BS production. Instead of fruit processing waste, fruit juices like pineapple juice are also becoming attractive alternative carbon sources. Govindammal and Parthasarathi (2013a) carried out this studies and demonstrated 9.43 g/L yield from P. fluorescens MFS03 isolated from the crude oil enriched mangrove soil to improve the process economics.
Oil Processing Industries
Wastes from oil processing industries represent one of the alternative and easily available renewable substrates for production of microbial surface active molecules. Few examples are listed below. It is important to note that, the vegetable oil is one of the first substrates reported for high yield of SLs from Torulopsis bombicola. A SLs with the yield of 67 g/L has been reported by Cooper and Paddock (1984). Not only, sophorose lipid type BS but also other types of glycolipids have been studied extensively by using wastes from oil industries. Robert et al. (1989) and Mercadé et al. (1993) disclosed that the usage of vegetable oil from the distillation process and is effective for RHL production from Pseudomonas strains. Various oils along with water soluble carbon sources are proved to be good substrates for microbial surfactant molecules. This is evident from the following example. Babacu oil (5% v/v) supplemented with glucose (1% w/v) as carbon source provides a good source for growth and BE production. This work carried out by Sarubbo et al. (1999) suggested that two strains of C. lipolytica (1055 and 1120) produce BEs at the end of the exponential growth phase and beginning of the stationary growth phase.
Olive oil, sunflower has been proved as potential carbon and energy sources for production of microbial surfactants. The oils that contain low chain length (<C10) fatty acids undergoes modification for incorporation into surface active products. Haba et al. (2000) investigated the use of olive, sunflower oils in submerged culture condition by 36 microbial strains. They reported that several Pseudomonas strains usually grows well on waste olive or sunflower oil (2%) reducing SFT (<40 mN/m) of production medium while Bacillus strains do not use these substrates efficiently. Other strains like Rhodococcus, Acinetobacter calcoaceticus, and Candida neither use oils for growth nor for BS production. Abalos et al. (2001) also used a soybean oil refinery waste for production of RHLs using P. aeruginosa AT 10 strain and detected seven different homologs (R2C10C10 + R1C10C10 + R2C10C12 + R1C10C12 + R1C12:1C10 + R1C12:2 + R1C8:2) totaling ≈9.5 g/L. They also reported excellent antifungal properties against various filamentous fungi. A range of saccharic and lipidic feed stoke has been frequently used to produce SLs using C. bombicola. The fatty acid unsaturation, carbon chain length and source of low-cost industrial lipid feed-stocks influenced SLs production (Felse et al., 2007).
Rahman et al. (2002) used soybean oil, safflower oil and glycerol for production of RHLs using cultures of P. aeruginosa. Soybean oil supplements helps in increasing the biomass and RHL production to several fold that obtained just with safflower oil and glycerol. Increased amount of SL type BS has been produced by increasing the concentrations of safflower oil and glucose. Further yield can be enhanced with increased concentration of yeast extracts (Zhou et al., 1992). Use of such low cost renewable substrates in BS fermentation technology could be applied for bioremediation of hydrocarbon-contaminated sites and oil recovery process.
Among the above mentioned substrates, glycerol represents an important renewable carbon source as it is one of the main by-product of the biodiesel, biofuel production processes worldwide. For example, 1 kg of glycerol is generated from 10 kg of bio-diesel when rapeseed oil is used (Meesters et al., 1996). Decanoic acid and rapeseed oil were used by Trummler et al. (2003) to grow Pseudomoas sp. DSM 2874 and produce mixture of four types of glycolipids (rhamnolipid 1–4), L-(+)-rhamnose and (R, R)-3-(3-hydroxydecanoyloxy). Fed-batch process with rapeseed oil produced mixtures of mono and di RHLs at a very high yield of 45 g l-1. Another important work has been reported by Thanomsub et al. (2004) on glycolipid monoacylglycerols BS from Candida ishiwadae. This strain was isolated from plant material in Thailand on soybean cooking oil. Yeasts such as C. bombicola ATCC 22214 also efficiently used corn oil and honey for SLs production achieving higher yields when both grown on sugar and oil (Pekin et al., 2005).
In addition, Abouseoud et al. (2007) achieved BS production from P. fluorescens Migula 1895-DSMZ using olive oil as a carbon source with ammonium nitrate as a nitrogen sources. The products is reportedly a type of glycolipid with various properties like foaming, emulsifying and antimicrobial activities in addition to being highly stable at 120°C for 15 min, NaCl (10% w/v) and a wide range of pH values. Tsukamurella sp. DSM 44370 also used vegetable oil for its growth in addition to glycolipid BS production. Mutant strains of P. aeruginosa EBN-8 produced BS on canola, soybean, and corn oil refineries (Raza et al., 2007a,b). Canola oil refinery waste supplemented with sodium nitrate was reported best for microbial growth and RHL production with a yield of 8.50 g/L. Co-utilization of canola oil and glucose has also been carried out successfully for production of BS from C. lipolytica (Sarubbo et al., 2007). Oil wastes from cottonseed, soybean, palm oil, babassu, and corn oil refinery were studied as substituting low-cost substrates for RHL production by P. aeruginosa LBI strain. Marine microbial strains can also make use of oils (e.g., olive oil) other than aromatic hydrocarbons or crude oil for BS production. Khopade et al. (2012) reported potential BS producing strain, marine Nocardiopsis B4 isolated from the west coast of India. The BS is stable at higher temperature (100°C), wide range of pH and salt concentrations. Olive oil has been proved to enhanced BS production. In some cases use of only pure carbon sources may not give the high yield of BS. However, disaccharides like lactose if supplemented with olive oil, the prominent difference can be seen in the intra- and extracellular lipids synthesized by the microbes. This concept has been showed from the work by Zhou and Kosaric (1993).
Palm oil mill effluent is also a promising substrate for BS production. Palm oil has also been used for BS production using P. aeruginosa SP4 (Pansiripata et al., 2010). A newly isolated BS-producing strain namely Nevskia ramosa NA3 has been reported for production of 1.0 g/L BS on palm oil mill effluent (Chooklin et al., 2013). Saimmai et al. (2012) also documented BS and BE producing microorganisms from palm oil contaminated industrial sites in palm oil refinery factory. Along with palm oil, they also included other sources like palm oil decanter cake and palm oil mill effluent. Use of such kind of different oil for screening and BS production process has successfully resulted five new genera namely, Buttiauxella, Comamonas, Halobacterium, Haloplanus, and Sinorhizobium for the first time. Such studies are significant for the future development of economically efficient industrial-scale biotechnological processes. Studies by Thaniyavarn et al. (2008) indicated the SL production by Pichia anomala PY1, a thermo tolerant strain isolated from fermented food. They used 4% soybean oil as carbon source at pH 5.5 and 30°C for 7 days. Comparative studies on media supplemented with both glucose or soybean oil lead to good BS production.
Comparative studies carried out by Govindammal and Parthasarathi (2013b) on glucose, petroleum based substrates, waste fried vegetable oil, and coconut oil cake for BS production from Pseudomonas fluorescence MFS03 isolated from mangrove forest soil. They proved that vegetable oil and coconut oil are reliable substrates for BS production. These oils contain high percentage of oleic acid.
Very recently, Saravanan and Subramaniyan (2014) isolated P. aeruginosa PB3A strain from oil contaminated soil and examined BS production on various substrates namely, castor oil, coconut oil, rapeseed oil corn oil, motor oil, sunflower oil, olive oil, olein, barley bran, cassava flour waste, rice bran peanut cake, potato waste, and wheat bran instead of routine carbon sources. Corn oil and cassava waste flour were found to be highly effective. Once again these studies have confirmed the potential role of agro-industrial wastes for BS production in place of synthetic media.
Sometimes the oils in the production medium needs to be supplied along with other ingredients like mineral salts, glucose. Bento and Gaylarde (1996) carried out BS production from Pseudomonas by growing in the production medium with sterile diesel oil, mineral salts, and glucose. Other oil sources like jet fuel JP8 also act as rich carbon source. Muriel et al. (1996) worked on Jet fuel JP8 for BS production from Cladosporium resinae where SFT of the production medium was lowered significantly with the increase in emulsion and foaming properties. Thavasi et al. (2009) reported Azotobacter chroococcum a BS producing strain isolated from marine environment able to grow on waste motor lubricant oil, crude oil, and peanut oil cake. Peanut oil cake was reported as best source for BS production with a yield of 4.6 g/L and an ability to emulsify various hydrocarbons effectively. Studies from Thavasi et al. (2007) described the outlook for BS production by using relatively cheap and abundantly available resources such as peanut oil cake and waste motor lubricant oil. This fact is supported from the studies reported on production and characterization of glycolipopeptide BS from Corynebacterium kutscheri. Studies showed optimum growth (9.8 g/L) and BS production (6.4 mg/ml) in fermentation medium with peanut oil cake. This glycolipopeptide emulsifies crude oil, waste motor lubricant oil, kerosene, diesel, peanut oil, xylene, naphthalene, and anthracene which have applications in various hydrocarbons in bioremediation processes. This study has proved potential role of BS in bioremediation process. Peanut oil has been used by probiotic bacterial system (Lactobacillus delbrueckii) for production of BS (Thavasi et al., 2011).
In addition to these inexpensive sources, spent yeast from fermentation industries has also been utilized in the production of high value product from a commercial point of view (Alcantara et al., 2012). Vance-Harrop et al. (2003) used babassu oil and D-glucose as carbon sources for the BS production from yeast strain C. lipolytica IA1055. This BS is composed of carbohydrate, lipid, protein in production medium prepared in natural seawater (diluted up to 50% v/v) supplemented with urea, ammonium sulfate, and phosphate. Most literature suggests exploitation of natural processes and developing economically viable production of BSs through the use of oil industry wastes. Bhardwaj et al. (2013) recently reviewed the production and applications of BSs from the oleo-chemical industrial wastes. Waste oils can be used for screening and selection of microbes for their waste oil utilizing capacity and BS production. Mercadé et al. (1996) carried out such studies where, lube oil was used to study 44 different cultures isolated from hydrocarbon-contaminated soil samples. Their studies showed that about 10% of the strains isolated shows BS production. These strains include Rhodococcus sp. for trehalose glycolipids and Bacillus sp. for lipopeptide type BS synthesis.
Spent oils are usually abundantly available oils that are quite difficult to dispose of due to environmental concerns including persistence and resistance to biodegradation (Mercadé et al., 1996). They include waste vegetable oil, used motor oil, lubricating oils, jet fuels all of which can act as cheaper source for microbial processes such as BS production. Usage of such kind substrates is usually encouraged as a pollution control strategies. Food processing industries use huge quantity of frying oils, where the composition vary depending on the number of times it has been used, modification in its composition, and finally need for pretreatment.
Studies carried out by Morita et al. (2007) on production of glycolipids by basidiomycete yeast Pseudozyma antarctica, on glycerol with the yield of 0.3 g/L of a BS. Another contribution on this aspect is shared by Ashby et al. (2005), where they used 40% of glycerol and 34% of hexadecane soluble compounds (92% of fatty acids and 6% of monoacylglycerol/triacylglycerol) and 26% of water for SLs synthesis by C. bombicola. About 60 g/L yields of SL was obtained from these studies. Several reports in literature support the use of glycerol as a carbon source for BS production (Guerra-Santos et al., 1986; Santa Anna et al., 2002; Rashedi et al., 2005b). Not only Candida and/or Pseudomonas spp. utilize glycerol as carbon source. Fontes et al. (2012) reported a wild type Yarrowia lipolytica for BS production using residual glycerol or clarified cashew apple juice present abundantly in Brazil. High amount of olive oil mill wastewater is produced from the olive oil extraction procedures. Olive oil mill effluent (OOME) appears as a concentrated black color liquor that contains water-soluble polyphenols which usually represents an environmental challenge for disposal. However, OOME also contains some sugars (20–80 g/L), nitrogen compounds (12–24 g/L), organic acids (5–15 g/L), and residual oil (0.3–5 g/L). Mercadé et al. (1993) successfully used OOME for the production of RHL BS using the strain Pseudomonas sp. JAMM.
Oil cakes or soapstocks are semisolid or gummy product produced from processes oil seed where chemicals are used for extraction and refining the seed originated edible oils. The soapstock in spite of being a complex substrate has been successfully shown to produce highest yield of RHLs, along with different oily substrates, viz., sunflower oil, olive oil, soy bean oil. Yields up to 15.9 g/L were reported when using P. aeruginosa strain LBI grown in a salt medium containing soapstock (Benincasa et al., 2002). Soapstock has also been used efficiently for production of extracellular capsular polysaccharides (Benincasa et al., 2002). There have been examples of competent surfactant synthesis on soapstock and oil refinery wastes by Candida antarctica or Candida apicola with much higher yields than in the medium without addition of oil refinery waste (Bednarski et al., 2004). This shows the suitability of oil refinery waste for microbial surfactant production. Hydrophobic carbon sources like petroleum fractions, animal fat or vegetable oil have been utilized by several bacteria or yeast supplemented in cultured media for microbial surfactants (Hommel, 1990).
Two BEs namely, emulsan and biodispersan from A. calcoaceticus RAG-1 and A. calcoaceticus A2 were also produced by using soapstock as a carbon source (Shabtai, 1990). These two BEs show wide range of applications in stabilization of oil–water emulsion, the dispersion of large solid limestone granules and formation of micrometer-sized water suspension (Rosenberg and Ron, 1998). Soybean soapstock waste proved to be the best substrate with the yield of 11.7 g/L of RHLs that reduced the SFT in the culture broth to 26.9 mN/m with a critical micelle concentration (CMC) of 51.5 mg/L. Nitschke et al. (2005) reported production of mainly mono-RHL (RhaC10C10) when grown on hydrophobic substrates, while hydrophilic carbon sources lead to predominance of the di-RHL (RhaRhaC10C10) production. Pure soybean oil has been the predominant carbon source for many BSs production. Vollbrecht et al. (1999) tested similar oleic acid-rich oils, rapeseed oil and reported it to be efficient for BS production using Tsukamurella species DSM 44370. About 30 g/L glycolipid was produced from 110 g/L sunflower oil. The BS obtained showed high surface and interfacial activity and had some antimicrobial activities against some bacteria and a fungal strain.
Food Processing by-Products
Most of the edible oils, vegetable oils, saturated, unsaturated fats are used by food processing industries. Today the majority of food markets are dependent on these oils and fats. In addition to this, medicinal, pharmaceutical, cosmetic industries also use them. Once the oils are processed for food production, the residues become harmful pollutants to our environment. Wastes from soybean, potato, sweet potato, sweet sorghum contains high amount of starch that acts as base material in fermentation process. Waste products like canola meal, coconut cake, peanut cake, soybean cake, also represent suitable candidates for cheaper substrates (Mercadé et al., 1996). Processed olive oil, sunflower, ground nut oil, rape seed oil; potato peels are useful as raw material for microbial products. A peat, composed of decomposed vegetable matter contains high amount of carbohydrates with main sugars like glucose, galactose, xylose, and amino acids provides excellent source for the growth of microbes. Other by-products from vegetable oil refining processes are also becoming one of the most targeted substrates for microbial BS production process.
In addition to the above mentioned relatively cheap substrates a number of abundantly available starch base substrates provide another alternative renewable carbon sources. One of the representative examples is the potato processing industry that produces significant quantities of starch-rich waste substrates suitable for BS production. In addition to approximately 80% water contents, potato waste also has carbohydrates (17%), protein (2%), fat (0.1%), vitamins, inorganic minerals, and trace elements. Thus, potato wastes are a rich source of various components which can support the growth of microorganisms for production of various commercially important products. A commercially prepared potato starch in mineral salts medium was investigated by Fox and Bala (2000). They reported BS production by B. subtilis ATCC 21332 and a significant reduction in SFT from 71.3 to 28.3 mN/m with a CMC value of 0.10 g/L using a methylene chloride extract of the BS. Thompson et al. (2000), put forward the use of potato effluents containing high-solids (HSs) and low-solids (LSs) substrates for production of surfactin for a Bacillus strain. They used 10 time diluted effluents with or without trace minerals amendments and used corn steep liquor successfully to produce surfactin with slightly lower yields LS substrate than from optimized potato starch medium.
Thompson et al. (2001) also showed that the LSs potato effluents can be used for surfactin production after heat treatment without the need for complete sterilization and after pretreatments to enhance yields. Such studies are significant for finding applications in low-value applications like environmental remediation or oil recovery. Like molasses, sometimes potato based substrates also need to undergo pretreatment procedures involving heating, removal of starch particulates and acid hydrolysis. Thermal and acid pretreatment would help in the removal of contaminant vegetative cells yet can have mixed results on slight improvement or reduction in yields (Thompson et al., 2001). Other contributions were reported by Noah et al. (2002, 2005) where potato process effluents were used for production of BS from B. subtilis sp. in continuous culture and air left fermentation conditions. Noah et al. (2002) worked on improving the process for utilization of potato related substrate. However, they observed the yield of BS was restricted by the oxygen availability and competition for indigenous bacterial population. The same research group (Noah et al., 2005) carried out studies on surfactin production from Bacillus sp. by using purified potato starch and unamended LSs potato process effluent. Their studies highlighted that the process is oxygen limited and that recalcitrant indigenous bacteria in the potato process effluent hamper continuous surfactin production. They suggested the use of a chemostat operated in batch mode for surfactin production should be accomplished with the use of antifoam agents to prevent surfactant loss. They noted that antifoam does not interfere with recovery of surfactin and its efficacy and were able to achieve 0.6 g/L of surfactin from two different potato-processing facilities in comparison with Initial trials (0.9 g/L) from potato process effluent. Thus, they established that cassava wastewater produced from the cassava flour preparation, a renewable inexpensive and easily available carbon source can be used for surfactin production by B. subtilis and other biotechnological processes. Different unconventional carbon sources such as potato peel powder, corn powder, sugarcane bagasse and Madhuca indica were also used by Jain et al. (2013). They reported increased viscosity in cultures yet achieved maximum SFT reduction when compared to other substrates. They reported an unidentified BS production at a yield of 15.40 ± 0.21 g/L on corn powder base production medium from Klebsiella sp. strain RJ-03 and concluded that the use of such cheap substrates have a significant potential for commercialization for applications in bioremediation processes.
Kinetics of Biosurfactant Production
It is well-established that along with environmental parameters such as pH, temperature, aeration, agitation, CO2 level etc.; BS production is also dependent on the substrate composition and concentration in the media. These parameters interact with each other in a complex way to affect the kinetics of the BS production. C:N ratio plays an important role in the production process. Nitrogen limitation has been reported to enhance production (Abu-Ruwaida et al., 1991). Patel and Desai (1997) reported that BS production was enhanced under nitrogen limiting conditions. Temperature, pH, aeration, and salt concentrations are of course important parameters that influence production at commercial levels (Navon-Venezia et al., 1995).
Silva et al. (2010) used P. aeruginosa UCP0992 to investigate the effect of both carbon and nitrogen (source and concentration) on BS production at different cultivation conditions such as aeration, temperature, and agitation speed. Growth and BS production in mineral medium formulated with 3% glycerol and 0.6% NaNO3, at 28°C during 120 h incubation at 200 rpm was monitored. They reported an almost parallel relationship between BS production, cell growth, consumption of glycerol, emulsification, SFT reduction, hexadecane, and other substrate utilization. They concluded that BS production is associated with growth starting shortly after inoculation with a two phase profile, the first up to 24 h and remaining constant until 48 h, while in the second phase, production increased at a slower rate up to 96 h with yields of 8.0 g/L. Biomass concentration was high (4.0 g/L) and glycerol consumption profile showed a similar pattern to SFT reduction, while, the hexadecane emulsification followed BS production. Such observations support the use of SFT and emulsification as indicative measures for the presence of BS molecules in the medium.
In studies carried out by Wei et al. (2005) on P. aeruginosa J4, isolated from wastewater of a petrochemical factory located in southern Taiwan, reported RHL production from different carbon substrates. Two complex media Luria Bertaini (LB) medium usually used as for P. aeruginosa strains and condensed molasses fermentation soluble (CMS) and a simpler glucose mineral salts (GMSs) medium were used to grow and produce RHL. RHL production was 1.7, 0.77 and 0.20 g/L on GMS, LB, and CMS media, respectively. It was also observed that high nitrogen content in a fermentation medium limits the BS production.
Wu et al. (2008) used an indigenous strain P. aeruginosa EM1 originating from an oil-contaminated site located in southern Taiwan to investigate RHLs improvement in GMS media by the response surface methodology. They changed carbon (glucose, sucrose, glycerol, olive oil, soybean oil, oleic acid, hexane) and inorganic nitrogen sources (NaNO3 and NH4Cl) and organic (yeast extract and urea). Maximum productivity of 136.4 and 71.8 mg/L/h was reported for glucose and glycerol, respectively. On the other hand, nitrate was the better inorganic nitrogen source (8.63 g/L) than ammonium ion (0.43 g/L) for RHL production. While organic sources were a very poor source of RHL production. The effect of C/N ratio on RHL production was thus investigated using two types of carbon sources (glucose or glycerol). The best RHL yield (6.8 g/L) occurred at a C/N ratio of 26 when glucose was used as the carbon source, whereas glycerol source yielded 7.5 g/L, at a C/N ratio of 52.
Literature surveys showed that, the Kinetics of biomass (BM), BS production, substrate utilization along with the fermentation duration required for growth of organisms are the most crucial parameters for commercial production processes. Raza et al. (2006) carried out kinetics for BS production for P. aeruginosa EBN-8 with different hydrocarbons viz., n-hexadecane paraffin oil, kerosene oil. Both n-hexadecane and paraffin oil, RHL production was 4.1 and 6.3 g/L respectively. Changing the carbon source and other parameter definitely affects the growth of organisms as well as the BS production.
Like n-hexadecane, other hydrocarbon namely n-octadecane 2% (v/v) has been proved to be supportive for the kinetic studies of BS production from P. aeruginosa OCD. Less than 5 days incubating conditions, in liquid Bushnell-Haas media with n-octadecane as the substrate resulted 0.98 mg/mL RHL in the culture broth at the stationary growth phase (Sahoo et al., 2011). Supplementation of multivalent cations viz., ZnSO4 followed by MnSO4 in the culture broth again, enhances the yield of BS production. This has been confirmed by authors thought monitoring the emulsification index assay.
Studies carried out by Khopade et al. (2012) included the kinetics of BS production up to 12 days for marine Nocardiopsis B4 under batch cultures condition. BSs from this halotolerant strains has potential for bioremediation of oil contaminated sites (oil spills). Investigation including measurement of SFT, emulsification assay, cell separation provides ample of information to understand the production of BS commercially.
Report available on probiotic bacteria like L. pentosus CECT-4023 has demonstrated strong BS production on cheese whey as an alternative medium. Carbon source viz., glucose, biomass and BS have been modeled according to reported models available in the literature (Rodrigues et al., 2006c). Their studies included four lactobacilli species for BS production by growing on De Man et al. (1960) MRS broth for lactobacilli strains as well as medium supplemented with whey. With MRS medium the yield of BS from Lactobacillus casei reached 1.6 g/L. For both Lactobacillus rhamnosus and L. pentosus BS yields were reported at 1.7 g/L and for Lactobacillus coryniformis subsp. torquens it was found to be 1.8 g/L. Further investigation of L. pentosus CECT-4023 showed BS production using whey as an alternative medium with low yield of 1.4 g/L. The growth of L. pentosus CECT-4023 is less on whey medium which may be probably due to the lack of some nutrients, although similar BS concentrations were obtained. The authors suggested that with a culture medium optimization it could be possible to achieve higher BS concentrations.
Pacheco et al. (2010) suggested that higher concentrations of glycerol, sodium nitrate, and yeast extract lead to increased yield of BS from Rhodococcus erythropolis strain ATCC 4277. The authors also revealed that increasing the phosphate buffer within the range between 60 and 150 mmol/L increases the yield of BS (285 mg/L) due to maintained pH during the fermentation process. Well-established methodologies have been proposed for BS production from C. lipolytica through the usage of soybean oil refinery residue (6%) and 1% glutamic acid supplementation. Rufino et al. (2014) explored growth-associated production of crude BS with a yield of 8.0 g/L from C. lipolytica UCP 0988 after 72 h of incubation. Sarubbo et al. (2007) worked on canola oil and glucose as cheaper substrates and documented 8.0 g/L of yield of BS produced by C. lipolytica. Other strain of C. sphaerica produced yields of 4.5 g/L at up to 144 h culture conditions. C. sphaerica has been reported for BS production of about 9 g/L after 144 h (Luna et al., 2011, 2012).
Factorial experimental design has been proved to be very supportive for studying the kinetics for production of microbial metabolites. Rocha et al. (2014) reported the production of BSs using cashew apple juice from P. aeruginosa MSIC02. They used 24 full factorial experimental design, using temperature, glucose concentration from cashew apple juice, phosphorous concentration and cultivation time as variables. Kinetics of growth and production of BSs by P. aeruginosa indicated reduction in SFT up to 47.7 to 28.0 dyn/cm and indicated production of surface active molecules.
In a recent molecular biology investigation (Perfumo et al., 2013) for the expression of the rhlB and rhlC rhamnosyltransferase genes responsible for RHLs production of P. aeruginosa strains showed no significant differences in the genes or the quantity or composition of RHLs congeners obtained by manipulating growth conditions. Fixed sequential expression patterns for rhlB and rhlC rhamnosyltransferase genes were observed during growth. They reported that it was not possible to induce significant up-regulation by varying producer strains or growth media. Their results indicated that the RHLs genes are highly conserved molecules and that their expression has a rather stringent control. The authors conclude that there is little opportunity to manipulate and greatly increase the yield of RHLs in P. aeruginosa strains. They also concluded that manipulating growth and medium composition conditions has little effect in the strains obtained from widely different environmental situations. In addition RHLs production was not greater on water-insoluble substrates than water-soluble ones, as often claimed in the past.
Fermentation Technology: Role in Commercialization of Biosurfactant Production
When any industry is involved in the production of a particular compound, their main consideration is always achieving maximum profit from the minimum investment. BS industries are no exception to these policies and profitable applications are also of main concerns. The basic prerequisite of the BS/BE production industry is the type of substrate used in the production process. Since, some of the BS producing microbial communities are often isolated from oil, hydrocarbon-contaminated environments. Therefore, it is often assumed that water insoluble substrates are a necessity for the production of surface active agents. However, this fact may not always be true. Ample literature available suggests that water soluble carbon sources like glucose, fructose, sucrose etc., can be used in synthesizing the amphiphilic substances from a variety of microbial populations (Satpute et al., 2008, 2010a).
From an industrial point of view, using water soluble substrates is more attractive compared with using immiscible substrates. Therefore, the use of water soluble substrates particularly inexpensive industrial waste such as whey, molasses, distilleries effluent, waste oils would help to bring down the production cost in industries. Subsequently, such efforts make BS fermentation technology feasible. However, there are certain advantages and disadvantages of using low-priced substrates for BS production as shown in Table 4. Several challenging problems and possible strategies to overcome these problems are represented in Figure 3 to enhance the commercial yield of BS. It is also noted that though there are numerous reports and patents on BEs and BSs production, they are rarely used in commercial production process (Shete et al., 2006). One of the foremost reasons is the use of chemical based media for BS growth and production process. These exclusive chemicals enhance the production cost of these amphiphilic molecules. Very few attempts have been offered for the usage of renewable substrates. The second most important factor to consider is a cost effective separation/purification of amphiphilic substances. The purification procedures are significant in terms of time requirement and could account for up to 60% of the total production cost and may result in a low yield (Desai and Banat, 1997; Banat et al., 2010). Under such circumstance, the utilization of crude quality product or the direct fermentation broth with or without affecting the activity and potency of the actual product may be a solution. This fact has been well-supported from the studies carried out by Thavasi et al. (2011) who concluded that for environmental applications the BSs need not be pure and could be synthesized from a mixed cheaper carbon sources. It is possible to create an economically and environmentally viable mitigation technology for the bioremediation process. Noteworthy achievements in the field of genetic engineering technologies have promoted some significant advances such as the alteration in the substrate requirement of producing organisms. One of the best examples was reported by Koch et al. (1988) where insertion of lac plasmid from E. coli in P. aeruginosa was carried out for utilization of whey from dairy industry to produce BS.
FIGURE 3. Successful cram for increasing (he commercial yield of biosurfactant using renewable substrates.
The next consideration that may contribute to cost reduction is the duration of fermentations for some BS production. RHLs fermentations in most literature continue for up to 100 h while most of the production may have occurred in the initial 48 h. Prolonging the production time for a little more yield achievement may not be a cost effective undertaking particularly as most gene expression for RHLs production take place in the initial 24 h of fermentation (Perfumo et al., 2013). Routine use of cheap renewable substrates (agro-industrial wastes) and competent methods for recovery and purification of BSs can assist optimized conditions for high yields fermentation process on commercial scale. Another important aspect that should be highlighted here is biological remediation technologies used in the process on a larger extent. We can felicitate this process through developing innovative techniques such as foams or micro-foams (colloidal gas aphrons-CGA) in conjunction with BSs (Pacwa-Płociniczak et al., 2011). Some of the important criteria that need to be considered for production of surface active agents in industries are as follows:
- The type of substrate/raw materials
- Continuous supply of ingredients of same composition
- Potential microorganisms
- Purification process used for the recovery of surface active compounds
- Monetary inputs
- Marketing
- Application potential
The new exciting development in this current area of research and priorities to the interdisciplinary research approaches in combination with the technologies of large-scale fermentation and genetic engineering, BSs will be commercially successful compounds of the future (Saharan et al., 2011).
Our future work in the area of BS should be on the economics of BS production processes, particularly using the alternative low-cost fermentative media and reasonable cheaper product recovery process.
Conclusion
Nature provides great immense possibilities for isolation of novel BEs or BSs producing microbial communities and products that can be utilized in the various application fields such as petroleum industry, detergents, pharmaceutical companies, agriculture, and personal health care products. The use of economically cheaper substrates is paving the way for cost effective BS production process in industries. Large scale production of these surface active compounds is promising; however, product with pure quality needs further streamlined approaches. Enormous data has been generated on application oriented properties like SFT, IFT, EA, wetting, foaming, detergency, and flocculation leading to wider applications in various industrial sectors. Use in bioremediation technology has received better treatment as hydrocarbon-polluted sites can be treated effectively with crude BSs products or the producing organisms. Although number of developments have taken place, it is important to note that BS production should be followed by minimum monetary input using cheap low cost waste materials while maintaining quality and quantity wherever possible. In future, our research on BS must be targeted on the economics of the fermentation processes of BS and BE, predominantly carried out through the practice of alternative low-cost effective production media and recovery processes.
Future Prospects
Several food industries make use of various fats and oils that lead to the production of huge amount of high mass wastes, marine oils, soapstock, and free fatty acids from the extraction of seed oils. Searching for novel BS and BEs suitable for food industries has been steadily increasing and is expected to be a future prospect as more of these type molecules are included in food products. This is mainly driven by industries seeking to reduce dependency on plant emulsifiers produced by genetically modified crops. Other interesting areas include the use of BS producing microorganisms in composting. The most future potential application, however, are likely going to be related to oil industries application including bioremediation, cleaning, and microbial EOR both in oil sludge tank cleaning and oil well-recovery.
Conflict of Interest Statement
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Acknowledgments
Surekha K. Satpute, thanks Department of Science & Technology (DST), Government of India, Ministry of Science & Technology for financial support {SR/WOS-A/LS-1076/2014 (G)}.
References
Abalos, A., Pinazo, A., Infante, M. R., Casals, M., Garcia, F., and Manresa, A. (2001). Physicochemical and antimicrobial properties of new rhamnolipid produced by Pseudomonas aeruginosa AT10 from oil refinery wastes. Langmuir 1, 1367–1371. doi: 10.1021/la0011735
Abouseoud, M., Maachi, R., and Amrane, A. (2007). Biosurfactant production from olive oil by Pseudomonas fluorescens. Comm. Curr. Res. Educ. Top. Trends Appl. Microbiol. 1, 340–347.
Abu-Ruwaida, A. S., Banat, I. M., Haditirto, S., and Khamis, A. (1991). Nutritional requirements and growth characteristics of a biosurfactant producing Rhodococcus bacterium. World J. Microbiol. Biotechnol. 7, 53–61. doi: 10.1007/BF02310920
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Alcantara, V. A., Pajares, I. G., Simbahan, J. F., and Rubio, M. D. (2012). Substrate dependent production and isolation of an extracellular biosurfactant from Saccharomyces cerevisiae 2031. Philipp. J. Sci. 141, 13–24.
Ashby, R. D., Nunez, A., Solaiman, D. K. Y., and Thomas, A. F. (2005). Sophorolipid biosynthesis from a biodiesel coproduct stream. J. Am. Oil Chem. Soc. 9, 625–630. doi: 10.1007/s11746-005-1120-3
Babu, P. S., Vaidya, A. N., Bal, A. S., Kapur, R., Juwarkar, A., and Khanna, P. (1996). Kinetics of biosurfactant production by Pseudomonas aeruginosa strain BS2 from industrial wastes. Biotechnol. Lett. 18, 263–268. doi: 10.1007/BF00142942
Banat, I. M., Franzetti, A., Gandolfi, I., Bestetti, G., Martinotti, M. G., Fracchia, L.,et al. (2010). Microbial biosurfactants production, applications and future potential. Appl. Microbiol. Biotechnol. 87, 427–444. doi: 10.1007/s00253-010-2589-0
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Banat, I. M., Makkar, R. S., and Cameotra, S. S. (2000). Potential commercial applications of microbial surfactants. Appl. Microbiol. Biotechnol. 53, 495–508. doi: 10.1007/s002530051648
Bednarski, W., Adamczak, M., Tomasik, J., and Płaszczyk, M. (2004). Application of oil refinery waste in the biosynthesis of glycolipids by yeast. Bioresour. Technol. 95, 15–18. doi: 10.1016/j.biortech.2004.01.009
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Benincasa, M. (2007). Rhamnolipid produced from agroindustrial wastes enhances hydrocarbon biodegradation in contaminated soil. Curr. Microbiol. 54, 445–449. doi: 10.1007/s00284-006-0610-8
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Benincasa, M., Abalos, A., Oliveira, I., and Manresa, A. (2004). Chemical structure, surface properties and biological activities of the biosurfactant produced by Pseudomonas aeruginosa LBI from soapstock. Antonie Van Leeuwenhoek 85, 1–8. doi: 10.1023/B:ANTO.0000020148.45523.41
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Benincasa, M., Contiero, J., Manresa, M. A., and Moraes, I. O. (2002). Rhamnolipid production by Pseudomonas aeruginosa LBI growing on soapstock as the sole carbon source. J. Food Eng. 54, 283–288. doi: 10.1016/S0260-8774(01)00214-X
Bento, F. M., and Gaylarde, C. C. (1996). The production of interfacial emulsions by bacterial isolates from diesel. Int. Biodeterior. Biodegrad. 8, 31–33. doi: 10.1016/S0964-8305(96)00021-2
Bhardwaj, G., Cameotra, S. S., and Chopra, H. K. (2013). Utilization of oleo-chemical industry by-products for biosurfactant production. AMB Express 3, 68. doi: 10.1186/2191-0855-3-68
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Cameotra, S. S., and Makkar, R. S. (2004). Recent applications of biosurfactants as biological and immunological molecules. Curr. Opin. Microbiol. 7, 262–266. doi: 10.1016/j.mib.2004.04.006
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Cammarota, M. C., and Freire, D. M. G. (2006). A review on hydrolytic enzymes in the treatment of wastewater with high oil and grease content. Bioresour. Technol. 97, 2195–2210. doi: 10.1016/j.biortech.2006.02.030
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Cazetta, M. L., Celligoi, M. A. P. C., Buzato, J. B., Scarmino, I. S., and Da Silva, R. S. F. (2005). Optimization study for sorbitol production by Zymomonas mobilis in sugar cane molasses. Process Biochem. 40, 747–751. doi: 10.1016/j.procbio.2004.01.041
Chooklin, C. S., Phertmean, S., Cheirsilp, B., Maneerat, S., and Saimmai, A. (2013). Utilization of palm oil mill effluent as a novel and promising substrate for biosurfactant production by Nevskia ramosa NA3. Songklanakarin J. Sci. Technol. 35, 167–176; Accession # 89652747.
Cooper, D. G., and Paddock, D. A. (1984). Production of a biosurfactant from Torulopsis bombicola. Appl. Environ. 47, 173–176.
Cunha, C. D., Rosario, M., Rosado, A. S., and Leite, G. F. (2004). Serratia sp. SVGG16: a promising biosurfactant producer isolated from tropical soil during growth with ethanol-blended gasoline. Process Biochem. 39, 2277–2282. doi: 10.1016/j.procbio.2003.11.027
Daniel, H. J., Otto, R. T., Binder, M., Reus, M., and Syldatk, C. (1999). Production of sophorolipids from whey: development of a two-stage process with Cryptococcus curvatus ATCC 20509 and Candida bombicola ATCC 22214 using deproteinized whey concentrates as substrates. Appl. Microbiol. Biotechnol. 51, 40–45. doi: 10.1007/s002530051360
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Daniel, H. J., Reuss, M., and Syldatk, C. (1998a). Production of sophorolipids in high concentration from deproteinized whey and rapeseed oil in a two stage fed batch process using Candida bombicola ATCC 22214 and Cryptococcus curvatus ATCC 20509. Biotechnol. Lett. 20, 1153–1156. doi: 10.1023/A:1005332605003
Daniel, H. J., Otto, R. T., Reuss, M., and Syldatk, C. (1998b). Sophorolipid production with high yields on whey concentrate and rapeseed oil without consumption of lactose. Biotechnol. Lett. 20, 805–807. doi: 10.1023/B:BILE.0000015927.29348.1a
Daverey, A., Pakshirajan, K., and Sangeetha, P. (2009). Sophorolipids production by Candida bombicola using synthetic dairy wastewater. World Acad. Sci. Eng. Technol. 3, 470–472. doi: 10.1007/s10098-010-0330-4
De Man, J. C., Rogosa, M., and Sharpe, M. E. (1960). A medium for cultivation of Lactobacilli. J. Appl. Bacteriol. 23, 130–135. doi: 10.1111/j.1365-2672.1960.tb00188.x
Desai, J. D., and Banat, I. M. (1997). Microbial production of surfactants and their commercial potential. Microbiol. Mol. Rev. 61, 47–64.
Deshpande, M., and Daniels, L. (1995). Evaluation of sophorolipid biosurfactant production by Candida bombicola using animal fat. Bioresour. Technol. 54, 143–150. doi: 10.1016/0960-8524(95)00116-6
Dubey, K. V., Charde, P. N., Meshram, S. U., Yadav, S. K., Singh, S., and Juwarkar, A. (2012). Potential of new microbial isolates for biosurfactant production using combinations of distillery waste with other industrial wastes. J. Pet. Environ. Biotechnol. 12, 1–11. doi: 10.4172/2157-7463.S1-002
Dubey, K., and Juwarkar, A. (2001). Distillery and curd whey wastes as viable alternative sources for biosurfactant production. World J. Microbiol. Biotechnol. 17, 61–69. doi: 10.1023/A:1016606509385
Dubey, K., and Juwarkar, A. (2004). Determination of genetic basis for biosurfactant production in distillery and curd whey wastes utilizing Pseudomonas aeruginosa strain BS2. Ind. J. Biotechnol. 3, 74–81.
Dubey, K. V., Juwarkar, A. A., and Singh, S. K. (2005). Bioseparations and downstream processing. Adsorption–desorption process using wood based activated carbon for recovery of biosurfactant from fermented) distillery wastewater. Biotechnol. Prog. 21, 860–867. doi: 10.1021/bp040012e
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Felse, P. A., Shah, V., Chan, J., Rao, K. J., and Gross, R. A. (2007). Sophorolipid biosynthesis by Candida bombicola from industrial fatty acid residues. Enzyme Microb. Technol. 40, 316–323. doi: 10.1016/j.enzmictec.2006.04.013
Fiebig, R., Detlef, S., Jae-Chun, C., and Sung-Taik, L. (1997). Biodegradation of polychlorinated biphenyls (PCBs) in the presence of a bioemulsifier produced on sunflower oil. Biodegradation 8, 67–75. doi: 10.1023/A:1008256110136
Fiechter, A. (1992). Biosurfactants: moving towards industrial application. Trends Biotechnol. 10, 208–217. doi: 10.1016/0167-7799(92)90215-H
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Fontes, G. C., Ramos, N. M., Amaral, P. F., Nele, F. M., and Coelho, M. A. Z. (2012). Renewable resources for biosurfactant production by Yarrowia lipolytica. Braz. J. Chem. Eng. 29, 483–493. doi: 10.1590/S0104-66322012000300005
Fox, S. L., and Bala, G. A. (2000). Production of surfactant from Bacillus subtilis ATCC 21332 using potato substrates. Bioresour. Technol. 75, 235–240. doi: 10.1016/S0960-8524(00)00059-6
Fracchia, L., Ceresa, C., Franzetti, A., Cavallo, M., Gandolfi, I., Van Hamme, J.,et al. (2014). “Industrial applications of biosurfactants,” in Biosurfactants: Production and Utilization—Processes, Technologies, and Economics, Chap. 12, eds N. Kosaric and F. V. Sukan (Boca Raton: CRC Press), 245–260. doi: 10.1201/b17599-15
Franzetti, A., Gandolfi, I., Fracchia, L., Van Hamme, J., Gkorezis, P., Marchant, R.,et al. (2014). “Biosurfactant use in heavy metal removal from industrial effluents and contaminated sites,” in Biosurfactants: Production and Utilization—Processes, Technologies, and Economics, Chap. 17, eds N. Kosaric and F. V. Sukan (Boca Raton: CRC Press), 361–366. doi: 10.1201/b17599-20
Govindammal, M., and Parthasarathi, R. (2013a). Biosurfactant production using pineapple juice as medium by Pseudomonas fluorescens isolated from mangrove forest soil. Ind. Streams Res. J. 2, 1–10; Accession # : 87333604.
Govindammal, M., and Parthasarathi, R. (2013b). Production and characterization of bio surfactant using renewable substrates by Pseudomonas fluorescence isolated from mangrove ecosystem. J. Appl. Chem. 2, 55–62.
Guerra-Santos, L. H., Kappeli, O., and Fiechter, A. (1986). Dependence of Pseudomonas aeruginosa continuous culture biosurfactant production on nutritional and environmental factors. Appl. Microbiol. Biotechnol. 24, 443–448. doi: 10.1007/BF00250320
Haba, E., Espuny, M. J., Busquets, M., and Manresa, A. (2000). Screening and production of rhamnolipids by Pseudomonas aeruginosa 47T2 NCIB 40044 from waste frying oils. J. Appl. Microbiol. 88, 379–387. doi: 10.1046/j.1365-2672.2000.00961.x
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Helmy, Q., Kardena, E., Funamizu, N., and Wisjnuprapto. (2011). Strategies toward commercial scale of biosurfactant production as potential substitute for it’s chemically counterparts. Int. J. Biotechnol. 12, 66–86. doi: 10.1504/IJBT.2011.042682
Hommel, R. K. (1990). Formation and physiological role of biosurfactants produced by hydrocarbon-utilizing microorganisms. Biosurfactants in hydrocarbon utilization. Biodegradation 1, 107–119. doi: 10.1007/BF00058830
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Jain, R. M., Mody, K., Joshi, N., Mishra, A., and Jha, B. (2013). Effect of unconventional carbon sources on biosurfactant production and its application in bioremediation. Int. J. Biol. Macromol. 62, 52–58. doi: 10.1016/j.ijbiomac.2013.08.030
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Joshi, S., Bharucha, C., Jha, S., Yadav, S., Nerurkar, A., and Desai, A. J. (2008). Biosurfactant production using molasses and whey under thermophilic conditions. Bioresour. Technol. 99, 195–199. doi: 10.1016/j.biortech.2006.12.010
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Kapadia, S. G., and Yagnik, B. N. (2013). Current trend and potential for microbial biosurfactants. Exp. Biol. Sci. 4, 1–8. doi: 10.12691/ijebb-2-2-4
Khopade, A., Biao, R., Liu, X., Mahadik, K., Zhang, L., and Kokare, C. (2012). Production and stability studies of the biosurfactant isolated from marine Nocardiopsis sp. B4. Desalination 285, 198–204. doi: 10.1016/j.desal.2011.10.002
Kim, H. S., Jeon, J. W., Kim, B. H., Ahn, C. Y., Mock, O. H. H., and Yoon, B. D. (2006). Extracellular production of a glycolipid biosurfactant, mannosylerythritol lipid, by Candida sp. SY16 using fed-batch fermentation. Appl. Microbiol. Biotechnol. 70, 391–396. doi: 10.1007/s00253-005-0092-9
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Koch, A. K., Raiser, J., Kappeli, O., and Fiechter, A. (1988). Genetic construction of lactose utilizing strains of Pseudomona aeruginosa and their application in biosurfactant production. Nat. Biotechnol. 6, 1335–1339. doi: 10.1038/nbt1188-1335
Kosaric, N., Cairns, W. L., Gray, N. C. C., Stechey, D., and Wood, J. (1984). The role of nitrogen in multiorganism strategies for biosurfactant production. J. Am. Oil Chem. Soc. 61, 1735–1743. doi: 10.1007/BF02582138
Lee, S., Lee, S. J., Kim, S., Park, I., Lee, Y., Chung, S.,et al. (2008). Characterization of new biosurfactant produced by Klebsiella sp. Y6-1 isolated from waste soybean oil. Bioresour. Technol. 99, 2288–2292. doi: 10.1016/j.biortech.2007.05.020
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Luna, J. M., Rufino, R. D., Albuquerque, C. D., Sarubbo, L. A., and Campos-Takaki, G. M. (2011). Economic optimized medium for tension-active agent production by Candida sphaerica UCP0995 and application in the removal of hydrophobic contaminant from sand. Int. J. Mol. Sci. 12, 2463–2476. doi: 10.3390/ijms12042463
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Luna, J. M., Rufino, R. D., Campos-Takaki, G. M., and Sarubbo, L. A. (2012). Properties of the biosurfactant produced by Candida sphaerica cultivated in low-cost substrates. Chem. Eng. Trans. 27, 67–72. doi: 10.3303./CET12201
Makkar, R. S., and Cameotra, S. S. (1997). Utilization of molasses for biosurfactant production by two Bacillus strains at thermophilic conditions. J. Am. Oil Soc. 74, 887–889. doi: 10.1007/s11746-997-0233-7
Makkar, R. S., and Cameotra, S. S. (1999). Biosurfactant production by microorganisms on unconventional carbon sources – a review. J. Surfactants Deterg. 2, 237–241. doi: 10.1007/s11743-999-0078-3
Makkar, R. S., and Cameotra, S. S. (2002). An update on uses of conventional substrates for biosurfactants production and their new applications. Appl. Microbiol. Biotechnol. 58, 428–434. doi: 10.1007/s00253-001-0924-1
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Makkar, R. S., Cameotra, S. S., and Banat, I. M. (2011). Advances in utilization of renewable substrates for biosurfactant production. Appl. Microbiol. Biotechnol. Express 1, 1–19. doi: 10.1186/2191-0855-1-5
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Maneerat, S. (2005). Production of biosurfactants using substrates from renewable resources. Songklanakarin J. Sci. Technol. 27, 675–683.
Marchant, R., and Banat, I. M. (2012a). Biosurfactants: a sustainable replacement for chemical surfactants? Biotechnol. Lett. 34, 1597–1605. doi: 10.1007/s10529-012-0956-x
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Marchant, R., and Banat, I. M. (2012b). Microbial biosurfactants : challenges and opportunities for future exploitation. Trends Biotechnol. 30, 558–565. doi: 10.1016/j.tibtech.2012.07.003
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Marchant, R., Funston, S., Uzoigwe, C., Rahman, P. K. S. M., and Banat, I. M. (2014). “Production of biosurfactants from nonpathogenic bacteria,” in Biosurfactants: Production and Utilization—Processes, Technologies, and Economics, Chap. 5, eds N. Kosaric and F. V. Sukan (Boca Raton: CRC Press), 73–82. doi: 10.1201/b17599-7
Meesters, P. A. E. P., Huijberts, G. N. M., and Eggink, G. (1996). High-cell-density cultivation of the lipid accumulating yeast Cryptococcus curvatus using glycerol as a carbon source. Appl. Microbiol. Biotechnol. 45, 575–579. doi: 10.1007/s002530050731
Mercadé, M. E., Manresa, M. A., Robert, M., Espuny, M. J., Andrés, C., and Guinea, J. (1993). Olive oil mill effluent (OOME): new substrate for biosurfactant production. Bioresour. Technol. 43, 1–6. doi: 10.1016/0960-8524(93)90074-L
Mercadé, M. E., Monleon, L., de Andres, C., Rodon, I., Martinez, E., Espuny, M. J.,et al. (1996). Screening and selection of surfactant- producing bacteria from waste lubricating oil. J. Appl. Bacteriol. 81, 161–168. doi: 10.1111/j.1365-2672.1996.tb04494.x
Moldes, A. B., Torrado, A. M., Barral, M. T., and Domínguez, J. M. (2007). Evaluation of biosurfactant production from various agricultural residues by Lactobacillus pentosus. J. Agric. Food Chem. 55, 4481–4486. doi: 10.1021/jf063075g
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Monteiro, A. S., Coutinho, J., Júnior, A. C., Rosa, C. A., Siqueira, E. P., and Santos, V. L. (2009). Characterization of new biosurfactant produced by Trichosporonm montevideense CLOA 72 isolated from dairy industry effluents. J. Basic Microbiol. 49, 1–11. doi: 10.1002/jobm.200900089
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Monteiro, A. S., Domingues, V. S., Souza, M. V., Lula, I., Gonçalves, D. B., de Siqueira, E. P.,et al. (2012). Bioconversion of biodiesel refinery waste in the bioemulsifier by Trichosporon mycotoxinivorans CLA2. Biotechnol. Biofuels 5, 1–12. doi: 10.1186/1754-6834-5-29
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Morita, T., Konish, M., Fukuoka, T., Imura, T., and Kitamoto, D. (2007). Microbial conversion of glycerol into glycolipid biosurfactants, mannosylerythritol lipids, by a basidiomycete yeast, Pseudozyma antarctica JCM 10317. J. Biosci. Bioeng. 104, 78–81. doi: 10.1263/jbb.104.78
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Muriel, J. M., Bruqu, J. M., Olfas, J. M., and Jimenez-Sanchez, A. (1996). Production of biosurfactant by Cladosporium resinae. Biotechnol. Lett. 18, 235–240. doi: 10.1007/BF00142937
Navon-Venezia, S., Zosim, Z., Gottlieb, A., Legmann, R., Carmeli, S., Ron, E. Z.,et al. (1995). Alasan, a new bioemulsifier from Acinetobacter radioresistens. Appl. Environ. Microbiol. 61, 3240–3244.
Nitschke, M., Costa, S. G., and Contiero, J. (2010). Structure and applications of a rhamnolipid surfactant produced in soybean oil waste. Appl. Biochem. Biotechnol. 160, 2066–2074. doi: 10.1007/s12010-009-8707-8
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Nitschke, M., Costa, S. G., Haddad, R., Gonc, L. A. G., Alves, N. C., Eberlin, M. N.,et al. (2005). Oil wastes as unconventional substrates for rhamnolipid biosurfactant production by Pseudomonas aeruginosa LBI. Biotechnol. Prog. 21, 1562–1566. doi: 10.1021/bp050198x
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Nitschke, M., Ferraz, C., and Pastore, G. M. (2004). Selection of microorganisms for biosurfactant production using agroindustrial wastes. Braz. J. Microbiol. 35, 81–85. doi: 10.1590/S1517-83822004000100013
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Nitschke, M., and Pastore, G. M. (2004). Biosurfactant production by Bacillus subtilis using cassava processing effluent. Appl. Biochem. Biotechnol. 112, 163–172. doi: 10.1385/ABAB:112:3:163
Nitschke, M., and Pastore, G. M. (2006). Production and properties of a surfactant obtained from Bacillus subtilis grown on cassava wastewater. Bioresour. Technol. 97, 336–341. doi: 10.1016/j.biortech.2005.02.044
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Noah, K. S., Bruhn, D. F., and Bala, G. A. (2005). Surfactin production from potato process effluent by Bacillus subtilis in a chemostat. Appl. Biochem. Biotechnol. 122, 465–474. doi: 10.1385/ABAB:122:1-3:0465
Noah, K. S., Sandra, L. F., Debby, F. B., David, N. T., and Gregory, A. B. (2002). Development of continuous surfactin production from potato process effluent by Bacillus subtilis in an airlift reactor. Appl. Biochem. Biotechnol. 98–100, 803–813. doi: 10.1385/ABAB:98-100:1-9:803
Ohno, A., Takashi, A., and Shoda, M. (1992). Production of a lipopetide antibiotic surfactin by recombinant Bacillus subtilis NB22 using wheat bran as substrate. Biotechnol. Lett. 14, 817–822.
Ohno, A., Takashi, A., and Shoda, M. (1993). Production of antifungal peptide antibiotic iturin by Bacillus subtilis NB22 in solid state fermentation. J. Ferment. Bioeng. 75, 23–27. doi: 10.1016/0922-338X(93)90172-5
Ohno, A., Takashi, A., and Shoda, M. (1995). Production of lipopeptide antibiotic surfactin by recombinant Bacillus subtilis in solid state fermentation. Biotechnol. Bioeng. 47, 209–214. doi: 10.1002/bit.260470212
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Oliveira, F. J. S., Vazquez, L., De Campos, N. P., and de França, F. P. (2006). Biosurfactants production by Pseudomonas aeruginosa FR using palm oil. Appl. Biochem. Biotehnol. 131, 727–737. doi: 10.1385/ABAB:131:1:727
Onbasli, D., and Aslim, B. (2009). Biosurfactant production in sugar beet molasses by some Pseudomonas spp. J. Environ. Biol. 30, 161–163.
Otto, R. T., Daniel, H. J., Pekin, G., Müller-Decker, K., Fürstenberger, G., Reuss, M.,et al. (1999). Production of sophorolipids from whey. II. Product composition, surface active properties, cytotoxicity and stability against hydrolases by enzymatic treatment. Appl. Microbiol. Biotechnol. 52, 495–501; Accession # WOS:000083529900006. doi: 10.1007/s002530051551
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Pacheco, C. J., Ciapina, E. M. P., Gomes, E. D. B., and Pereira, N. Jr. (2010). Biosurfactant production by Rhodococcus erythropolis and its application to oil removal. Braz. J. Microbiol. 41, 685–693. doi: 10.1590/S1517-83822010000300019
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Pacwa-Płociniczak, M., Płaza, G. A., Piotrowska-Seget, Z., and Cameotra, S. S. (2011). Environmental applications of biosurfactants: recent advances. Int. J. Mol. Sci. 12, 633–654. doi: 10.3390/ijms12010633
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Pansiripata, S., Pornsunthorntaweea, O., Rujiravanita, R., Kitiyanana, B., Somboonthanatea, P., and Chavadeja, S. (2010). Biosurfactant production by Pseudomonas aeruginosa SP4 using sequencing batch reactors: effect of oil-to-glucose ratio. Biochem. Eng. J. 49, 185–191. doi: 10.1016/j.bej.2009.12.011
Patel, R. M., and Desai, A. J. (1997). Biosurfactant production by Pseudomonas aeruginosa GS3 from molasses. Lett. Appl. Microbiol. 25, 91–94. doi: 10.1046/j.1472-765X.1997.00172.x
Patricia, B., and Jean-Claude, B. (1999). Involvement of bioemulsifier in heptadecane uptake in Pseudomonas nautica. Chemosphere 38, 1157–1164. doi: 10.1016/S0045-6535(98)00366-X
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Pekin, G., Vardar-Sukan, E., and Kosaric, N. (2005). Production of sophorolipids from Candida bombicola ATCC 22214 using Turkish corn oil and honey. Eng. Life Sci. 5, 357–362. doi: 10.1002/elsc.200520086
Perfumo, A., Rudden, M., Smyth, T. J. P., Marchant, R., Stevenson, P. S., Parry, N. J.,et al. (2013). Rhamnolipids are conserved biosurfactants molecules: implications for their biotechnological potential. Appl. Microbiol. Biotechnol. 97, 7297–7306. doi: 10.1007/s00253-013-4876-z
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Prabhu, Y., and Phale, P. S. (2003). Biodegradation of phenanthrene by Pseudomonas sp. strain PP2: novel metabolic pathway, role of biosurfactant and cell surface hydrophobicity in hydrocarbon assimilation. Appl. Microbiol. Biotechnol. 61, 342–351. doi: 10.1007/s00253-002-1218-y
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Rahman, K. S. M., Rahman, T. J., McClean, S., Marchant, R., and Banat, I. M. (2002). Rhamnolipid biosurfactant production by strains of Pseudomonas aeruginosa using low- cost materials. Biotechnol. Prog. 18, 1277–1281. doi: 10.1021/bp020071x
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Rashedi, H., Assadi, M. M., Bonakdarpour, B., and Jamshidi, E. (2005a). Environmental importance of rhamnolipid production from molasses as a carbon source. Int. J. Environ. Sci. Technol. 2, 59–62. doi: 10.1007/BF03325858
Rashedi, H., Jamshidi, E., Assadi, M. M., and Bonakdarpour, B. (2005b). Isolation and production of biosurfactant from Pseudomonas aeruginosa isolated from Iranian southern wells oil. Int. J. Environ. Sci. Technol. 2, 121–127.
Rashedi, H., Mazaheri Assadi, M., Jamshidi, E., and Bonakdarpour, B. (2006). Production of rhamnolipids by Pseudomonas aeruginosa growing on carbon sources. Int. J. Enviorn. Sci. Technol. 3, 297–303. doi: 10.1007/BF03325937
Raza, Z. A., Khan, M. S., and Khalid, Z. M. (2007a). Physicochemical and surface-active properties of biosurfactant produced using molasses by a Pseudomonas aeruginosa mutant. J. Environ. Sci. Health A Tox. Hazard. Subst. Environ. Eng. 42, 73–80. doi: 10.1080/10934520601015784
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Raza, Z. A., Rehman, A., Khan, M. S., and Khalid, Z. M. (2007b). Improved production of biosurfactant by a Pseudomonas aeruginosa mutant using vegetable oil refinery wastes. Biodegradation 18, 115–121. doi: 10.1007/s10532-006-9047-9
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Raza, Z. A., Khana, M. S., Khalidb, Z. M., and Rehmanb, A. (2006). Production of biosurfactant using different hydrocarbons by Pseudomonas aeruginosa EBN-8 Mutant. Z. Naturforsch. C 61, 87–94.
Robert, M., Mercade, M. E., Bosch, M. P., Parra, J. L., Espuny, M. J., Manresa, M. A.,et al. (1989) Effect of carbon source on biosurfactant production by Pseudomonas aeruginosa 44T1. Biotechnol. Lett. 11, 871–874. doi: 10.1007/BF01026843
Rocha, M. V. P., Mendes, J. S., Qiro, M. E. A., Melo, V. M. M., Rocha, L., and Gonçalves, B. (2014). Biosurfactant production by Pseudomonas aeruginosa MSIC 02 in cashew apple juice using a 24 full factorial experimental design Chem. Ind. Chem. Eng. Q. 20, 49-58. doi: 10.2298/CICEQ120518100R
Rodrigues, L., Banat, I. M., Teixeira, J., and Oliveira, R. (2006a). Biosurfactants: potential applications in medicine. J. Antimicrob. Chemother. 57, 609–618. doi: 10.1093/jac/dkl024
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Rodrigues, L. R., Teixeira, J. A., and Oliveira, R. (2006b). Low-cost fermentative medium for biosurfactant production by probiotic bacteria. Biochem. Eng. J. 32, 135–142. doi: 10.1016/j.bej.2006.09.012
Rodrigues, L., Moldes, A., Teixeira, J., and Oliveira, R. (2006c). Kinetic study of fermentative biosurfactant production by Lactobacillus strains. Biochem. Eng. J. 28, 109–116. doi: 10.1016/j.bej.2005.06.001
Rodrigues, L. R., and Teixeira, J. A. (2008). “Biosurfactants production from cheese whey,” in Advances in Cheese Whey Utilization, Vol. 8, eds M. E. Cerd’an, M. Gonz’alez-Siso, and M. Becerra (Trivandrum: India-Transworld Research Network), 81–104.
Rosenberg, E., and Ron, E. Z. (1998). “Surface active polymers from the genus Acinetobacter,” in Biopolymers from Renewable Resources, ed. D. L. Kaplan (Berlin: Springer), 281–291. doi: 10.1007/978-3-662-03680-8_11
Rufino, R. D., Luna, J. M., de Campos Takaki, G. M., and Sarubbo, L. A. (2014). Characterization and properties of the biosurfactant produced by Candida lipolytica UCP 0988. Electron. J. Biotechnol. 17, 34–38. doi: 10.1016/j.ejbt.2013.12.006
Rufino, R. D., Sarubbo, L. A., and Campos-Takaki, G. M. (2007). Enhancement of stability of biosurfactant produced by Candida lipolytica using industrial residue as substrate. World J. Microbiol. Biotechnol. 23, 729–734. doi: 10.1007/s11274-006-9278-2
Saharan, B. S., Sahu, R. K., and Sharma, D. (2011). A review on biosurfactants: fermentation, current developments and perspectives. Genet. Eng. Biotechnol. J. 29, 1–14.
Sahoo, S., Datta, S., and Biswas, D. (2011). Optimization of culture conditions for biosurfactant production from Pseudomonas aeruginosa OCD1. J. Adv. Sci. Res. 2, 32–36.
Saimmai, A., Onlamool, T., Sobhon, V., and Maneerat, S. (2012). “Diversity of biosurfactants/bioemulsifiers-producing bacteria isolated from palm oil contaminated soils in palm oil industry,” in Proceedings of the 38th Congress on Science and Technology of Thailand “Science for the Future of Mankind” (Chiang Mai: The Empress Convention Hall), 1–6.
Santa Anna, L. M., Sebastian, G. V., Menezes, E. P., Alves, T. L. M., Santos, A. S., Pereira, N. Jr.,et al. (2002). Production of biosurfactants from Pseudomonas aeruginosa PA1 isolated in oil environments. Braz. J. Chem. Eng. 19, 159–166. doi: 10.1590/S0104-66322002000200011
Santos, D. K. F., Rufino, R. D., Luna, J. M., Santos, V. A., Salgueiro, A. A., and Sarubbo, L. A. (2013). Synthesis and evaluation of biosurfactant produced by Candida lipolytica using animal fat and corn steep liquor. J. Pet. Sci. Eng. 105, 43–50. doi: 10.1016/j.petrol.2013.03.028
Saravanan, V., and Subramaniyan, V. (2014). Production of biosurfactant by Pseudomonas aeruginosa PB3A using agro-industrial wastes as a carbon source. Malays. J. Microbiol. 10, 57–62.
Sarubbo, L. A., Farias, C. B. B., and Campos-Takaki, G. M. (2007). Co-utilization of canola oil and glucose on the production of a surfactant by Candida lipolytica. Curr. Microbiol. 54, 68–73. doi: 10.1007/s00284-006-0412-z
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Sarubbo, L. A., Marcal, M. C. R., and Campos-Takaki, G. M. (1997). Comparative-study on bioemulsifiers produced by Candida lipolytica strains. Arquivos Biol. E Tecnol. 40, 707–720.
Sarubbo, L. A., Porto, A. L. F., and Campos-Takaki, G. M. (1999). The use of babassu oil as substrate to produce bioemulsifiers by Candida lipolytica. Can. J. Microbiol. 45, 423–426. doi: 10.1139/w99-025
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Satpute, S. K., Banat, I. M., Dhakephalkar, P. K., Banpurkar, A. G., and Chopade, B. A. (2010a). Biosurfactants, bioemulsifiers and exopolysaccharides from marine microorganisms. Biotechnol. Adv. 28, 436–450. doi: 10.1016/j.biotechadv.2010.02.006
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Satpute, S. K., Banpurkar, A. G., Dhakephalkar, P. K., Banat, I. M., and Chopade, B. A. (2010b). Methods for investigating biosurfactants and bioemulsifiers: a review. Crit. Rev. Biotechnol. 30, 127–144. doi: 10.3109/07388550903427280
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Satpute, S. K., Bhuyan, S. S., Pardesi, K. R., Mujumdar, S. S., Dhakephalkar, P. K., Shete, A. M.,et al. (2010c). “Molecular genetics of biosurfactants and bioemulsifiers synthesis in microorganisms,” in Biosurfactants, ed. R. Sen (New York, NY: Springer Science+Business meida, LCC Landes Bioscience), 15–33.
Satpute, S. K., Bhawsar, B. D., Dhakephalkar, P. K., and Chopade, B. A. (2008). Assessment of different screening methods for selecting biosurfactant producing marine bacteria. Ind. J. Mar. Sci. 37, 243–250.
Shabtai, Y. (1990). Production of exopolysaccharides by Acinetobacter strains in a controlled fed-batch fermentation process using soap stock oil (SSO) as carbon source. Int. J. Biol. Macromol. 12, 145–152. doi: 10.1016/0141-8130(90)90066-J
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Sheppard, J. D., and Mulligan, N. C. (1987). The production of surfactin by Bacillus subtilis grown on peat hydrolysate. Appl. Microbiol. Biotechnol. 27, 110–116. doi: 10.1007/BF00251931
Shete, A. M., Wadhawa, G., Banat, I. M., and Chopade, B. A. (2006). Mapping of patents on bioemulsifier and biosurfactant: a review. J. Sci. Ind. Res. 65, 91–115.
Shreve, G. S., Inguva, S., and Gunnam, S. (1995). Rhamnolipid biosurfactant enhancement of hexadecane biodegradation by Pseudomonas aeruginosa. Mol. Mar. Biol. Biotechnol. 4, 331–337. doi: 10.1128/AEM.68.9.4502-4508.2002
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Silva, S. N., Farias, C. B., Rufino, R. D., Luna, J. M., and Sarubbo, L. A. (2010). Glycerol as substrate for the production of biosurfactant by Pseudomonas aeruginosa UCP0992. Colloids Surf. B Biointerfaces 79, 174–183. doi: 10.1016/j.colsurfb.2010.03.050
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Smyth, T. J. P., Perfumo, A., Marchant, R., and Banat, I. M. (2010a). “Isolation and analysis of low molecular weight microbial glycolipids,” in Handbook of Hydrocarbon and Lipid Microbiology, Part 2, Chap. 28, ed. K. N. Timmis (Berlin Heidelberg: Springer-Verlag), 3705–3723. doi: 10.1007/978-3-540-77587-4_291
Smyth, T. J. P., Perfumo, A., Mcclean, S., Marchant, R., and Banat, I. M. (2010b). “Isolation and analysis of lipopeptides and high molecular weight biosurfactants,” in Handbook of Hydrocarbon and Lipid Microbiology, Chap. 27, ed. K. N. Timmis (Berlin Heidelberg: Springer-Verlag), 3689–3704. doi: 10.1007/978-3-540-77587-4_290
Solaiman, D. K. Y., Ashby, R. D., Foglia, T. A., Nuñez, A., and Marmer, W. N. (2003). “Fermentation-based processes for the conversion of fats, oils and derivatives into biopolymers and biosurfactants,” in Proceedings of the 31st United States-Japan Cooperative Program in Natural Resources (UJNR), Protein Resources Panel (Tsukuba: Eastern Regional Research Center, ARS, USDA), V1–V10.
Solaiman, D. K. Y., Ashby, R. D., Nunez, A., and Foglia, T. A. (2004). Production of sophorolipids by Candida bombicola grown on soy molasses as substrate. Biotechnol. Lett. 26, 1241–1245. doi: 10.1023/B:BILE.0000036605.80577.30
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Solaiman, D. K. Y., Ashby, R. D., Zerkowski, J. A., and Foglia, T. A. (2007). Simplified soy molasses-based medium for reduced-cost production of sophorolipids by Candida bombicola. Biotechnol. Lett. 29, 1341–1347. doi: 10.1007/s10529-007-9407-5
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Thaniyavarn, J., Chianguthai, T., Sangvanich, P., Roongsawang, N., Washio, K., Morikawa, M.,et al. (2008). Production of sophorolipid production by Pichia anomala. Basic Biotechnol. Biochem. 72, 2061–2068. doi: 10.1271/bbb.80166
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Thanomsub, B., Watcharachaipong, T., Chotelersak, K., Arunrattiyakorn, P., Nitoda, T., and Kanzaki, H. (2004). Monoacylglycerols glycolipid biosurfactants produced by a thermotolerant yeast, Candida ishiwadae. J. Appl. Microbiol. 96, 588–592. doi: 10.1111/j.1365-2672.2004.02202.x
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Thavasi, R., Jayalakshmi, S., Balasubramanian, T., and Banat, I. M. (2007). Biosurfactant production by Corynebacterium kutscheri from waste motor lubricant oil and peanut oil cake. Lett. Appl. Microbiol. 45, 686–691. doi: 10.1111/j.1472-765X.2007.02256.x
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Thavasi, R., Jayalakshmi, S., and Banat, I. M. (2011). Application of biosurfactant produced from peanut oil cake by Lactobacillus delbrueckii in biodegradation of crude oil. Bioresour. Technol. 102, 3366–3372. doi: 10.1016/j.biortech.2010.11.071
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Thavasi, R., Marchant, R., and Banat, I. M. (2014). “Biosurfactant applications in agriculture,” in Biosurfactants: Production and Utilization—Processes, Technologies, and Economics, Chap. 15, eds N. Kosaric and F. V. Sukan (New York, NY: CRC Press), 313–326. doi: 10.1201/b17599-18
Thavasi, R., Subramanyam Nambaru, V. R. M., Jayalakshmi, S., Balasubramanian, T., and Banat, I. M. (2009). Biosurfactant production by Azotobacter chroococcum isolated from the marine environment. Mar. Biotechnol. (N. Y.) 11, 551–556. doi: 10.1007/s10126-008-9162-1
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Thompson, D. N., Fox, S. L., and Bala, G. A. (2000). Biosurfactants from potato process effluents. Appl. Biochem. Biotechnol. 84–86, 917–930. doi: 10.1385/ABAB:84-86:1-9:917
Thompson, D. N., Fox, S. L., and Bala, G. A. (2001). The effects of pretreatments on surfactin production from potato process effluent by Bacillus subtilis. Appl. Biochem. Biotechnol. 91–93, 487–502. doi: 10.1385/ABAB:91-93:1-9:487
Trummler, K., Effenberger, F., and Syldatk, C. (2003). An integrated microbial/enzymatic process for production of rhamnolipids and L-(+)-rhamnose from rapeseed oil with Pseudomonas sp. DSM 2874. Eur. J. Lipid Sci. Technol. 105, 563–571. doi: 10.1002/ejlt.200300816
Vance-Harrop, M. H., de Gusmão, N. B., and de Campos-Takaki, G. M. (2003). New bioemulsifiers produced by Candida lipolytica using d-glucose and babassu oil as carbon sources. Braz. J. Microbiol. 34, 120–123. doi: 10.1590/S1517-83822003000200006
Vollbrecht, E., Rau, U., and Lang, S. (1999). Microbial conversion of vegetable oils surface active di-, tri-, and tetrasaccharide lipids (biosurfactants) by the bacterial strain Tsukamurella spec. Fett/Lipid 101, 389–394. doi: 10.1002/(SICI)1521-4133(199910)101:103.0.CO;2-9
Wei, Y.-H., Chou, C. L., and Chang, J. S. (2005). Rhamnolipid2 production by indigenous Pseudomonas aeruginosa J4 originating from petrochemical wastewater. Biochem. Eng. J. 27, 146–154. doi: 10.1016/j.bej.2005.08.028
Willey, R. (2001). Fats, oils and greases: the minimization and treatment of wastewaters generated from oil refining and margarine production. Ecotoxicol. Environ. Saf. 50, 127–133. doi: 10.1006/eesa.2001.2081
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Wu, J. Y., Yeh, K. L., Lu, W. B., Lin, C. L., and Chang, J. S. (2008). Rhamnolipid production with indigenous Pseudomonas aeruginosa EM1 isolated from oil-contaminated site. Bioresour. Technol. 99, 1157–1164. doi: 10.1016/j.biortech.2007.02.026
Pubmed Abstract | Pubmed Full Text | CrossRef Full Text | Google Scholar
Zhou, Q. H., and Kosaric, N. (1993). Effect of lactose and olive oil on intra-and extracellular lipids of Torulopsis bombicola. Biotechnol. Lett. 15, 477–482. doi: 10.1007/BF00129322
Zhou, Q. H., and Kosaric, N. (1995). Utilization of canola oil and lactose to produce biosurfactant with Candida bombicola. J. Am. Oil Chem. Soc. 72, 67–71. doi: 10.1007/BF02635781
Keywords: biosurfactants, bioemulsifiers, fermentation, renewable, substrates, sustainable
Citation: Banat IM, Satpute SK, Cameotra SS, Patil R and Nyayanit NV (2014) Cost effective technologies and renewable substrates for biosurfactants’ production. Front. Microbiol. 5:697. doi: 10.3389/fmicb.2014.00697
Received: 12 October 2014; Accepted: 25 November 2014;
Published online: 12 December 2014.
Edited by:
Pattanathu K. S. M. Rahman, Teesside University, UKReviewed by:
Giuseppe Spano, University of Foggia, ItalyChristopher L. Hemme, University of Oklahoma, USA
Copyright © 2014 Banat, Satpute, Cameotra, Patil and Nyayanit. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Ibrahim M. Banat, Faculty of Life and Health Sciences, School of Biomedical Sciences, University of Ulster, Coleraine BT52 1SA, Northern Ireland, UK e-mail: im.banat@ulster.ac.uk