Author Zhiming Chao was erroneously included as an author in the published article. The correct author list reads:
“Bowen Yang1, Kaiwei Xu3, Yanqi Liu3, Peng Cui2,4*”
“1Shanxi Ningguli New Materials Joint Stock Company Limited, Jinzhong, China, 2School of Civil Engineering, Nanjing Forestry University, Nanjing, China, 3College of Marine Science and Engineering, Shanghai Maritime University, Shanghai, China, 4Department of Applied Physics and Electronics, Umea University, Umea, Sweden”
Affiliation 5 “Institute of Water Sciences and Technology, Hohai University, Nanjing, China” assigned to Zhiming Chao has been removed from the article.
The Author contributions statement has been corrected to read:
“BY: Investigation, Conceptualization, Visualization, Data curation, Resources, Project administration, Funding acquisition, Validation, Methodology, Writing – review & editing, Software, Formal Analysis, Supervision. KX: Project administration, Methodology, Formal Analysis, Data curation, Investigation, Writing – review & editing, Software, Resources, Writing – original draft. YL: Validation, Methodology, Formal Analysis, Software, Writing – review & editing. PC: Supervision, Validation, Writing– review & editing, Data curation, Funding acquisition, Resources, Project administration, Visualization.”
The original version of this article has been updated.
Statements
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Summary
Keywords
marine coral sand-clay mixture, strength prediction, LDA-BPNN model, machine learning, empirical formula
Citation
Yang B, Xu K, Liu Y and Cui P (2026) Correction: Predictive modeling on the mechanical properties of marine coral sand-clay mixtures based on machine learning algorithms and triaxial shear tests. Front. Mar. Sci. 13:1789998. doi: 10.3389/fmars.2026.1789998
Received
17 January 2026
Accepted
19 January 2026
Published
04 February 2026
Approved by
Frontiers Editorial Office, Frontiers Media SA, Switzerland
Volume
13 - 2026
Updates
Copyright
© 2026 Yang, Xu, Liu and Cui.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Peng Cui, cui.peng@umu.se
†These authors have contributed equally to this work
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.