How does the space of production wells influence the heat extraction efficiency?–defined by a 3D modeling work in enhanced geothermal system (EGS)
- 1Science and Technology Research Institute, China Three Gorges Corporation, Beijing, China
- 2Guizhou Branch, China Three Gorges Corporation, Guiyang, Guizhou, China
- 3State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology, Chengdu, China
- 4Key Laboratory of Deep Underground Science and Engineering (Ministry of Education), Institute of New Energy and Low-Carbon Technology, Sichuan University, Chengdu, Sichuan, China
A Corrigendum on
How does the space of production wells influence the heat extraction efficiency?-defined by a 3D modeling work in enhanced geothermal system (EGS)
by Wang Z, Zhang B, Zhu X, Yang L, Fan Y, Yin H, Zhao P and Liu J (2024). Front. Energy Res. 12:1361290. doi: 10.3389/fenrg.2024.1361290
In the published article, there was an error in the Funding statement. “The author(s) declare financial support was received for the research, authorship, and/or publication of this article. This study was financially supported by the Natural Science Foundation of Chongqing, China (Grant No. CSTB2023NSCQ-LZX0036).” The correct Funding statement appears below.
Funding
The author(s) declare financial support was received for the research, authorship, and/or publication of this article. This study was financially supported by the China Three Gorges Corporation (Grant No. WWKY-2021-0393) and the Natural Science Foundation of Chongqing, China (Grant No. CSTB2023NSCQ-LZX0036).
The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Keywords: space of production well, heat extraction efficiency, enhanced geothermal system (EGS), numerical simulation, engineering scale
Citation: Wang Z, Zhang B, Zhu X, Yang L, Fan Y, Yin H, Zhao P and Liu J (2024) Corrigendum: How does the space of production wells influence the heat extraction efficiency?-defined by a 3D modeling work in enhanced geothermal system (EGS). Front. Energy Res. 12:1447768. doi: 10.3389/fenrg.2024.1447768
Received: 12 June 2024; Accepted: 20 June 2024;
Published: 02 July 2024.
Approved by:
Frontiers Editorial Office, Frontiers Media SA, SwitzerlandCopyright © 2024 Wang, Zhang, Zhu, Yang, Fan, Yin, Zhao and Liu. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Bo Zhang, emhhbmdfYm8xN0BjdGcuY29tLmNu