Skip to main content

CORRECTION article

Front. Mech. Eng., 02 July 2024
Sec. Engine and Automotive Engineering

Corrigendum: Meeting future NOx emission regulations by adding an electrically heated mixer

P. MeruvaP. Meruva1A. MatheausA. Matheaus1C. A. SharpC. A. Sharp1J. E. McCarthy JrJ. E. McCarthy Jr2M. Masoudi
M. Masoudi3*N. PoliakovN. Poliakov3S. NoorfeshanS. Noorfeshan3
  • 1Southwest Research Institute (SwRI), San Antonio, TX, United States
  • 2Eaton, Galesburg, MI, United States
  • 3Emissol LLC, Mill Creek, WA, United States

A Corrigendum on
Meeting future NOx emission regulations by adding an electrically heated mixer

by Meruva P, Matheaus A, Sharp CA, McCarthy JE Jr, Masoudi M, Poliakov N and Noorfeshan S (2022). Front. Mech. Eng. 8:991579. doi: 10.3389/fmech.2022.991579

In the published article, there was an error in Tables 10, 11 as published. The units for BSNOx and CO2 were mislabeled as g/hp-hr instead of g/kW-hr. The corrected tables and their captions appear below.

Table 10
www.frontiersin.org

Table 10. Cold WHTC test results.

Table 11
www.frontiersin.org

Table 11. Hot WHTC test results.

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: heated mixer, advanced aftertreatment, reduced NOx emissions, electric heater, increase exhaust temperature, 130°C DEF injection

Citation: Meruva P, Matheaus A, Sharp CA, McCarthy JE Jr, Masoudi M, Poliakov N and Noorfeshan S (2024) Corrigendum: Meeting future NOx emission regulations by adding an electrically heated mixer. Front. Mech. Eng 10:1441864. doi: 10.3389/fmech.2024.1441864

Received: 31 May 2024; Accepted: 14 June 2024;
Published: 02 July 2024.

Edited by:

Jinlong Liu, Zhejiang University, China

Reviewed by:

Xiaochen Wang, Chang’an University, China
Nan Zhang, Saint-Gobain Research North America, United States

Copyright © 2024 Meruva, Matheaus, Sharp, McCarthy, Masoudi, Poliakov and Noorfeshan. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: M. Masoudi, bWFuc291ci5tYXNvdWRpQGVtaXNzb2wuY29t

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.