Abstract
Determining the role and necessity of specific neurons in a network calls for precisely timed, reversible removal of these neurons from the circuit via remotely triggered transient silencing. Previously, we have shown that alternating magnetic field mediated heating of magnetic nanoparticles, bound to neurons, expressing temperature-sensitive cation channels TRPV1 remotely activates these neurons, evoking behavioral responses in mice. Here, we demonstrate how to apply magnetic nanoparticle heating to silence target neurons. Rat hippocampal neuronal cultures were transfected to express the temperature gated chloride channel, anoctamin 1 (TMEM16A). Spontaneous firing was suppressed within seconds of alternating magnetic field application to anoctamin 1 (TMEM16A) channel expressing, magnetic nanoparticle decorated neurons. Five seconds of magnetic field application leads to 12 s of silencing, with a latency of 2 s and an average suppression ratio of more than 80%. Immediately following the silencing period spontaneous activity resumed. The method provides a promising avenue for tether free, remote, transient neuronal silencing in vivo for both scientific and therapeutic applications.
Introduction
Spatially and temporally regulated signaling in complex brain circuits controls behavior, emotions and other brain functions. Tools to modulate specific network components and connections are absolutely crucial in the study of the functional connectivity of these circuits. In the past decade, electrical, optical, chemical, and magnetic tools to activate specific neurons, deep in the brain have been developed (Warden et al., 2014; Deisseroth, 2015; Kim et al., 2017). However, understanding the role of a specific neuron in a network requires selective, temporally controlled reversible activation and silencing of that component (Nomura et al., 2015). In our earlier work we had presented magnetothermal activation as a remote tether-free neuronal activation tool (Munshi et al., 2017). Here we introduce magnetothermal neuronal silencing as a robust temporally controlled silencing tool.
In the recent times, a variety of neuronal silencing strategies have been adapted (Slimko et al., 2002; Chow et al., 2010; Okazaki et al., 2012; Wiegert et al., 2017). Silencing is typically achieved by holding the membrane potential sufficiently negative to suppress action potential firing (Hodge, 2009). Pharmacological and chemogenetic approaches, like those using engineered small molecules to manipulate G-protein signaling pathways (Armbruster et al., 2007; Stachniak et al., 2014) or ligand gated ion channels to subdue action potentials (Slimko et al., 2002; Lerchner et al., 2007; Vardy et al., 2015; Weir et al., 2017) have slow on and off kinetics (minutes – hours).
Optogenetic tools employ modified opsins as light driven inward chloride pumps or outward proton pumps (Chow et al., 2010; Raimondo et al., 2012; Sudo et al., 2013; Okazaki et al., 2014). More recently, a chloride conducting channelrhodopsin was developed (Wietek et al., 2014, 2015; Govorunova et al., 2015, 2017), which uses a light gated ion channel based silencing mechanism. Photothermally induced hyperpolarization in wild type neurons has been achieved by optically heating nanomaterial absorbers on the cell surface, such as polymers (Feyen et al., 2016) or plasmonic gold nanorods (Yoo et al., 2014). As the photothermal approaches rely on an endogenous response of the neurons, they do not provide any cell specificity. While optogenetic and photothermal approaches provide a fast response (milliseconds to seconds), they require an invasive light delivery mechanism for deep brain modulation. To overcome the tissue penetration issue, upconversion nanoparticles, which absorb in the near infrared region and emit in the wavelength range of inhibitory opsins (Lin et al., 2017; Chen et al., 2018) are being explored to remotely silence deep brain neurons (Lin et al., 2018).
Here, we introduce magnetothermal silencing, using the heat generated by superparamagnetic nanoparticles to activate the thermosensitive chloride channel anoctamin 1 (TMEM16A) (Yang et al., 2008; Cho et al., 2012; Paulino et al., 2017a,b). We co-transfected membrane protein Ano1/TMEM16A and cytosolic calcium indicator protein GCaMP6f (Chen T.W. et al., 2013) in rat hippocampal cultures. Polymer encapsulated superparamagnetic nanoparticles were bound to the surface of neurons via A2B5 antibodies. When exposed to alternating magnetic fields, these particles heated up, raising the membrane temperature (Huang et al., 2010; Munshi et al., 2017). The elevated membrane temperature causes Ano1/TMEM16A channels to open, leading to an inhibition of calcium influx, recorded by the GCaMP6f signal (Figure 1). Within seconds of removing the magnetic field, membrane temperature returned to physiological value, and spontaneous calcium activity resumed. As Ano1/TMEM16A is a mammalian chloride channel (Huang et al., 2009; Cho et al., 2012; Terashima et al., 2013), no further protein engineering is necessary to express it in mammalian neurons (Hodge, 2009; Berndt et al., 2014; Wietek et al., 2015). The alternating magnetic fields used in magnetothermal silencing penetrate tissues easily (Oleson, 1982; Chen et al., 2015; Munshi et al., 2017). Only cells expressing Ano1/TMEM16A channels and having membrane bound nanoparticles are silenced, while the adjoining cells remain unaffected. Thus, the method allows to remotely and temporarily disengage a neuronal subpopulation from a brain circuit to investigate their importance for that circuit.
FIGURE 1
Materials and Methods
Rat Hippocampal Neuronal Cultures
Primary rat hippocampal neurons were harvested from E18 rat fetuses, from Timed Pregnancy female Sprague Dawly rats (Harlan), following a modified standard protocol (Brewer, 1997). All animal protocols were approved by the Animal Care and Use Committee at University at Buffalo, State University of New York. Neurons were cultured on 12 mm poly-L-lysine (Sigma-Aldrich, P6282) coated coverslips at 70–75% confluence, placed in 24-well cell culture plates, housed in a sterile incubator at 37°C with 5% CO2. Neurobasal medium (Thermo Fisher Cat. # 12348017) was used with added 2% v/v Glutamax (Thermo Fisher Cat. # 35050061), 2% v/v B-27 supplement (Thermo Fisher Cat. # 17504044) and 1% v/v Penicillin-Streptomycin (Thermo Fisher Cat. # 15140122). Every 3 days, half of the medium was replaced with fresh medium.
Transfection of Hippocampal Neurons
Plasmids encoding Anoctamin 1 with an mCherry marker (Ano1/TMEM16A-mCherry) and GCaMP6f were introduced into the hippocampal neurons using Calcium Phosphate method, following published protocols (Jiang and Chen, 2006). A day prior to the procedure, coverslips were transferred from 24 well plates to 35 mm dishes (4 in each dish, 70–75% confluent), filled with 1.5 ml sterile filtered, conditioned medium (medium that had been on the cells for 2–3 days). For each dish (1.5 ml medium) a total of 4–7 μg DNA was used (depending on prior titration results). For co-transfection, 4 μg Ano1/TMEM16A-mCherry p-DNA was mixed with 3 μg GCaMP6f p-DNA in DI water and 9 μl of CaCl2 solution (2M) was dropwise added. Prior to the addition of CaCl2, the volume of water was adjusted, so that the final volume of the mixture was 45 μl. After thoroughly mixing, the mixture was dropped into 45 μl of 2x HEPES buffer (NaCl, 274 mM; KCl, 10 mM; Na2HPO4.7H2O, 1.4 mM; D-glucose, 15 mM; HEPES (free acid) 42 mM. pH = 7.06). Following a 15 min precipitation period in the dark at room temperature, the mixture was added to the dish containing neurons (in 1.5 mL medium) with evenly distributed drops. Following a 15–20 min incubation (in the 37°C, 5% CO2 incubator) the dishes were aspirated with quenching medium, MEM (Thermo Fisher Cat. # 11575032) with 10% v/v FBS (Thermo Fisher Cat. # 16000044), was finally placed in conditioned medium (1.5 ml per 35 mm dish housing four 12 mm cover slips). All transfections were performed on DIV 4–7, with the highest yield being generally from DIV 5.
Preparation of Neurons for Silencing and Imaging
After transfection, the neuronal cultures were placed in incubator (37°C, 5% CO2) for next 48–72 h before experiment. 24 h prior to the experiment, 1 μM TTX (Sigma-Aldrich, 4368-28-9) was added to the culture medium. For imaging, the neurons were placed in imaging bath solution [NaCl 145.0, CaCl2 2.0, MgCl2 1.0, KCl 2.5 (or 4.0 for high K+), HEPES 10.0, Glucose 20.0 (all in mM) at pH 7.34 and an osmolality of 310–315 mOsmole/L].
Synthesized superparamagnetic core-shell Co-Mn-Ferrite nanoparticles (MNP) coated with PMA (poly-isobutylene-maleic anhydride) were functionalized by covalently attaching Neutravidin (Thermo Fisher Cat. # 31000) to the PMA layer (Lin et al., 2008; Zhang et al., 2015). Prior to this step, dye molecules (Thermo Fisher Cat. # A37573) were attached to the neutravidin molecules (Munshi et al., 2017; Castellanos-Rubio et al., 2018).
Cells growing on 12 mm cover slips were transferred to a Delrin imaging chamber (ALA MS-512DWPW) and 200 μL of the imaging bath solution was immediately added above the cells. Ten-minute incubation (at 37°C) with 1.5 μg of biotinylated A2B5 antibody (Invitrogen Cat. # 433110) was done (antibody dilution 1:200 – 1:100, for fast staining). The bath solution was then aspirated and replaced with buffer solution containing 2 μg functionalized MNPs in 200 μl of fresh bath solution and incubated for 10 min at 37°C. This incubation period resulted in optimal attachment of the nanoparticles to the antibodies, though biotin-avidin bonding. After this period, the unbound nanoparticles were washed out, leaving just a layer of nanoparticles decorated over the entire cytosolic membrane. The schematic diagram in Figure 1 illustrates the nanoparticle attachment mechanism in detail.
Live Cell Imaging Under Alternating Magnetic Fields
Alternating magnetic fields (AMF) were generated by a 5 mm diameter, 5 turn water cooled copper coil driven by a 7.5 kW AC power supply (MSI Automation). The coil surrounded the imaging dish (ALA Scientific instruments, MS-512DWPW) placed over the microscope (Zeiss Axio Observer A1 M) objective (Zeiss, working distance, 0.71 mm). AMF heats the metallic objective by producing eddy currents, causing focus drift and optical aberrations. To correct these in the real time, we used a fast, customized piezoelectric autofocus system (Motion X Corporation, 780 nm laser interferometer based). A custom-made microenvironment chamber was used to enclose the entire microscope with a stable ambient temperature. Precise control over the bath temperature was achieved by an inline solution heater (Warner instruments, controller TC324B), connected to a homemade perfusion system. HBO 200 lamp with appropriate filters were used for illuminating the fluorescent dyes [GCaMP6f: ex, FF02-472/30; DIC, FF495-Di03; em, FF01-525/30. Alexa Fluor 647: ex, FF01-635/18; DIC, Di02-R635; em, FF01-680/42 (Filters from Semrock)]. Fluorescence data were recorded at 10 Hz, using an Andor NEO sCMOS camera controlled by microManager software (Edelstein et al., 2010).
Image Processing and Intensity Normalization
Data were acquired as 16-bit gray scale image stacks. The average fluorescence intensities of an ROI (regions of interest) in the fluorescence microscopy images were extracted using FIJI (Fiji Is Just ImageJ). For this, intensity-based thresholding was performed by converting the non-contributing pixels (with background intensity values) to NaN (not a number). The intensity versus time data were then further processed using IgorPro (WaveMetrics).
The ROI intensity data contained fluorescence signal, offset by dark background noise. The dark noise is the average signal recorded by the camera under no illumination conditions. All experiments were done under similar ambient light conditions and the dark noise value, generally a function of the camera exposure time and binning deviated little from experiment to experiment. The constant dark noise value was subtracted from all data. Bleach correction was only performed, if the baseline showed substantial bleaching. In those cases, the baseline was fitted with an exponential function and a modified signal was obtained according to Equation (1).
Here, F′(t) is the signal values obtained after dark noise subtraction and (t) is the corresponding exponential fit function. Data thus modified contained calcium peaks over a constant baseline. The data was then normalized and converted to percentage change in fluorescence. The percentage change in fluorescence intensity was given by Equation (2).
Where F0 is the bleach corrected baseline ROI intensity and F(t), the intensity at any time t.
Reconstruction of AP Firing Pattern From GCaMP6f Calcium Signals
Single Spike Estimation
The sensitivity of GCaMP6f enables the detection of single action potentials. However, as the time between APs in a spike train is often shorter than the slow decay of GCaMP6f, it is challenging to isolate individual APs (Chen T.W. et al., 2013). To extract AP events from a GCaMP6f fluorescence signal (Ca2+ peaks) (Figure 2A, red), we first identified all single peaks from the baseline corrected and intensity normalized data.
FIGURE 2
A GCaMP6f peak was considered to have resulted from a single AP spike if the peak was distinctly one of the smallest in the bleach corrected, normalized data and if the peak.
The assignment of the smallest GCaMP6f peaks as being by a single AP is an assumption well supported by the amplitude, rise time and decay times of the corresponding profiles (Figures 2B, 3B) which agree well with published single AP GCaMP6f recordings (Chen T.W. et al., 2013; Park et al., 2013; Deneux et al., 2016). For a small number of near simultaneous APs (like those occurring during bursts), the signal amplitude of GCaMP6f is approximately linearly proportional to the number of APs (Chen T.W. et al., 2013; Park et al., 2013; Deneux et al., 2016). The signal decay time is an intrinsic property of the Ca2+ sensor resulting from the unbinding of Ca2+ and does not reflect the actual shape of the Ca2+ spike in the cell. Also, subsequent reconstruction of the GCaMP6f signal using convolution of this single spike profile estimate showed excellent fitting over large datasets. Even if the observed single signal actually was caused by multiple APs, the overestimation would not affect the relative change in firing rate during silencing (Yaksi and Friedrich, 2006; Pnevmatikakis et al., 2016).
FIGURE 3
AP Event Localization
To generate the AP spike train, or time course of AP events, a binary trace of duration equal to intensity rose about 5% above the baseline. All such isolated spikes were pooled to an average GCaMP6f peak, corresponding to a single AP firing. The average GCaMP6f peak profile data was then interpolated linearly to reduce the time interval between data points from 0.10 s (image acquisition exposure time) to 0.01 s (Figure 2B).
An estimated spike train was generated as binary trace of duration equal to the original data but sampled at 100 Hz frequency (10 Hz for original data) with ones at the estimated location of the AP spikes (Figure 2A, bottom trace). To quantify the precision of this spike train estimate, the average single-AP GCaMP6f profile (from the previous section, Figure 2B) was convolved with the binary trace and compared to the original data trace (Figures 2A, D). Convolution inserts a single-AP GCaMP6f profile at the location of each estimated AP spike. An overlay of the bleach corrected and normalized GCaMP6f data (red) and its corresponding convolution-based reconstruction (black broken) is shown in Figure 2A. A histogram of the residuals of the original and the reconstructed traces was fitted to a Gaussian function (Figure 2C). The estimated locations of the spikes were adjusted until the overall position error (σ) was less than 2% (Vogelstein et al., 2010; Park et al., 2013; Pnevmatikakis et al., 2016). The temporal error in AP estimation is determined by GCaMP6f kinetics as well as error in fitting.
Average AP Firing Rate Estimation
Average firing rates were calculated either directly from the reconstructed spike train, or estimated from Ca2+ peaks found automatically, using IgorPro’s Multipeak Fitting 2.0 package. After baseline removal, each Ca2+ peak was automatically fitted and the peak height and location were recorded. The peak heights were then normalized to the lowest peak height value, and rounded to the closest integers. This technique gives estimates of number of AP spikes constituting each Ca2+ peak, binned over a given time period, with error within GCaMP6f’s resolution limit.
Spiking Independent Quantification of Latency, Extent and Duration of Silencing
It is possible to quantify latency, extent and duration of silencing without reconstructing the AP spiking train. To calculate a sliding average of the calcium activity, we numerically integrated (trapezoidal) the normalized, bleach corrected and baseline subtracted GCaMP6f data. The integration curve serves as an indicator of cumulative intracellular Ca2+ influx. A reduction of the slope of the linear fit of the integrated GCaMP6f signal curve indicates a decline of Ca2+ activities, while an increased slope indicates increasing activity (Figure 2E). A section of the integration curve with reduced average slope indicated a period of suppressed activities, compared to other sections with steeper slopes. In Figure 2E integration (black) of the GCaMP6f signal (green, bottom) clearly captures the three distinct phases of Ca2+ activity. The first section shows GCaMP6f signal corresponding to spontaneous firing, the second section shows a period of inactivation, while the third section shows a resumption in firing. Linear fits (broken, overlaid) corresponding to each section of the integration plot intersect at points of transition of Ca2+ influx rates (points 1 and 2, Figure 2E). The point of intersection of the fitting lines of the first and the second sections determined the starting time (point 1), while the intersection of the fitting lines of the second and third sections gave the ending time of the silencing period (point 2). Latency was given as the temporal difference between the start of the AMF and the starting time of silencing (point 1). The duration of silencing was given by the difference between the ending and the starting times of silencing (point 2 – point 1). Latency and duration were calculated from the times obtained from individual plots, and later averaged.
All numerical data were processed in IgorPro 7.0.
Results
Thermal Suppression of Ca2+ Influx in Ano1/TMEM16A+ Neurons
We first determined if spontaneously firing Ano1/TMEM16A+ neurons could be significantly inactivated at higher temperatures. For this, we co-transfected rat hippocampal neurons with plasmid DNAs for mAno1/TMEM16A-mCherry and the genetic calcium indicator, GCaMP6f. Experiments were performed 48–72 h after transfection. To demonstrate successful silencing it was necessary to begin the experiment with an actively firing culture. The cultured neurons were treated with 1 μM TTX, 24 h prior to experiments. Right before the experiments, the TTX was washed out by perfusion (2 ml/min) with high K+ imaging buffer. Experiments were started only after spontaneous Ca2+ activity was observed, following the TTX wash. Chronic TTX incubation blocks spontaneous activity in the culture and washing increases the excitability of the pyramidal neurons (Desai et al., 1999; Hochbaum et al., 2014). Cells expressing Ano1/TMEM16A were identified by the mCherry marker (Figure 3A). GCaMP6f fluorescence signal captures cytosolic Calcium transients, resulting from membrane depolarization (Chen T.W. et al., 2013). The average GCaMP6f peak, corresponding to a single action potential (AP) firing was indistinguishable between neurons with and without Ano1/TMEM16A (Figure 3B). TTX incubation followed by high K+ buffer washing produced fast firing and regular GCaMP6f peaks were recorded for up to 1 h. No difference in firing duration was seen between Ano1/TMEM16A+/- cells at 37°C. At 37°C, the rise times (duration until calcium peak is reached from the baseline) were 0.275 ± 0.048 s and 0.250 ± 0.029 s (p = 0.674), and the half-decay time for the Ca2+ decay were 0.274 ± 0.011 s and 0.290 ± 0.055 s (p = 0.801) in Ano1/TMEM16A+/- neurons, respectively (Figure 3C).
Representative GCaMP6f fluorescence intensity traces recorded from Ano1/TMEM16A+/- cells at various steady bath temperatures (36, 37, 38, and 39°C) are shown in Figure 4A. A sharp reduction in GCaMP6f peaks was seen in Ano1/TMEM16A+ traces at 38°C and more significantly at 39°C, where the peaks completely disappeared (Figure 4B). On the other hand, in Ano1/TMEM16A- cells, no such striking suppression in Ca2+ activities was observed (Figure 4C). To quantify thermal suppression, we calculated AP firing rates from GCaMP6f fluorescence intensity traces by deconvolving the calcium transients. The 5 s AP firing rates in Ano1/TMEM16A+ cells decreased significantly from 37 to 39°C: from 2.29 ± 0.26 at 37°C to 1.06 ± 0.06 at 38°C and 0 at 39°C [p = 0.016 at 38°C (n = 4) and p = 0.003 at 39°C (n = 5) compared to 37°C, unpaired T-test] (Figure 4B). On the other hand, the AP firing rate of Ano1/TMEM16A- neurons did not change significantly over the same temperature range [AP rates averaged over 5 s (n = 5) were 2.20 ± 0.72 at 36°C, 1.98 ± 0.32 at 37°C, 1.85 ± 0.15 at 38°C and 1.45 ± 0.13 at 39°C]. The p-values of rates, compared to 37°C was 0.707 at 38°C and 0.168 at 39°C, obtained by unpaired T-test (Figure 4C).
FIGURE 4
The firing rates of Ano1/TMEM16A+ neurons were indistinguishable from that of Ano1/TMEM16A- neurons at 36 and 37°C (p = 0.663 and 0.453, respectively). However, at 38 and 39°C the spiking rates deviated significantly (p = 0.0227 and 0.0051, respectively) (Figure 4D). Furthermore, Ano1/TMEM16A- cells fired even at 40°C at 1.38 ± 0.61 APs per 5 s. The extracellular calcium concentration was fixed at 2 mM for all the experiments. This establishes that in Ano1/TMEM16A overexpressing neurons, 1–2°C elevation above the physiological temperature is sufficient to disrupt homoeostasis and cause significant suppression in action potential firing, unlike its wild type counterpart.
Heating Neuronal Plasma Membrane With Nanoparticles
For remote magnetothermal silencing of Ano1/TMEM16A+ neurons, we targeted superparamagnetic nanoparticles to the cell membrane as local heating agents. Core-shell nanoparticles (MNP) with a 6.7 ± 1.0 nm MnFe2O4 core and a CoFe2O4 shell, with a total inorganic diameter of 12.9 ± 1.4 nm were encapsulated in PMA [dodecyl-grafted-poly-(isobutylene-alt-maleic-anhydride)] (Lin et al., 2008; Zhang et al., 2015). The specific loss in power (SLP) of these particles, suspended in water, was 553 ± 10 W/g in a 37 kA/m alternating magnetic field (AMF), driven at 412.5 kHz. The outer PMA layer was functionalized with Neutravidin, pre-modified with Alexa Fluor 647 dye. To specifically target nanoparticles to the neuronal cell membrane, we briefly incubated neurons first with biotinylated A2B5 antibodies. Then the Neutravidin-dye tagged nanoparticles were added. After washing, only the membrane bound nanoparticles remained (Figures 1, 5A), effectively creating a shape conforming array of nanoscopic heat sources on the cell membrane (Huang et al., 2010; Munshi et al., 2017). Under alternating magnetic fields, these nanoparticles heated the membrane enough to open Ano1/TMEM16A channels.
FIGURE 5
To measure the temperature change of the magnetothermally heated cell membrane, we employed autofocus stabilized epifluorescence microscopy under alternating magnetic fields. Time series imaging of the fluorescent tag (Alexa Fluor 647) of the membrane bound nanoparticles enabled measuring temperature changes close to the membrane. In the temperature range of interest, the fluorescence emission intensity of the Alexa Fluor 647 fluorophore decreases approximately linearly with increasing temperature. The rate of normalized intensity change versus temperature was -0.46% °C-1. Five seconds of AMF application (28.87 ± 1.03 kA/m 412.5 kHz) was sufficient to raise the temperature by 3.42 ± 0.17°C (Figure 5B), corresponding to a heating rate of 0.75 ± 0.03°C/s. Cooling of the membrane starts instantaneously with the turning off of the AMF. With an offset of 2 s from the start of the AMF, we binned time into 5 s intervals. The approximate absolute temperature limits in the time windows were 38–40°C during 2–7 s, 38–40°C during 7–12 s, and 37–38°C during 17–22 s. These time points are marked on the top axis of Figure 5B, for visual guidance. The starting temperature in all experiments was 37°C.
Magnetothermal Silencing of Ano1/TMEM16A+ Neurons
To demonstrate transient magnetothermal, Ano1/TMEM16A mediated silencing of neuronal activities, we co-transfected cultured, mature rat hippocampal neurons with mAno1/TMEM16A-mcherry and GCaMP6f plasmid DNAs, 48 h prior to the experiment. 1 μM TTX was added to the culture medium 24 h prior to the experiment. Before the experiment, Alexa Fluor 647 labeled magnetic nanoparticles (MNPs) were bound to the neuronal membrane, using biotinylated A2B5 antibodies. Ano1/TMEM16A+ neurons were identified by mCherry marker. Cells were washed with high K+ imaging buffer to remove any remaining TTX molecules as well as any unbound antibodies or MNPs. Perfusion with the high K+ imaging buffer was started prior to imaging and was maintained at 2 ml/minute, while the temperature of the sample holder was held at 37°C by a solution inline heater driven by a temperature controller.
Alternating magnetic fields (28.87 ± 1.03 kA/m, 412.5 kHz) was applied for 5 s intervals using a magnetic hyperthermia coil placed over the delrin sample holder containing the cells. Autofocus stabilized GCaMP6f fluorescence images were acquired by a camera at a sampling rate of 10 Hz. Average GCaMP6f fluorescence traces, obtained as mean intensity of the pixels spanning the soma of neurons clearly showed suppression of Ca2+ influx upon AMF application in Ano1/TMEM16A+ neurons (Figure 6A). Computed AP events (shown with black bars, under each GCaMP6f fluorescence trace, Figure 6A) show complete silencing in most cases. The AP events were pooled from Ano1/TMEM16A+, MNP+ neurons from different cultures (n = 9), where cells with different initial spiking rates (at 37°C) were chosen. Firing rates (mean ± SEM, APs per 5 s), binned over 2 s intervals are shown in Figure 6B. Similar graphs for Ano1/TMEM16A-, MNP+ (n = 15) and Ano1/TMEM16A+, MNP- (n = 5) neurons are shown in Figures 6C,D, respectively.
FIGURE 6
To quantify the silencing, visibly achieved only in Ano1/TMEM16A+, MNP+ neurons, we compared the computed AP firing rates within time-bins (AMF = 28.87 ± 1.03 kA/m, 412.5 kHz; 0–5 s) corresponding to different temperature ranges (as mentioned in the previous section). Firing rates, recorded in the 2–7 s interval (0.65 ± 0.25 AP per 5 s; temperature = 38–40°C), were significantly different from the base value (3.05 ± 0.68 AP per 5 s; temperature 37°C), with p = 0.0032. Firing rates, recorded in the 7–12 s interval (0.90 ± 0.35 AP per 5 s; temperature = 38–39°C), were also significantly different from the base value (3.05 ± 0.68 AP per 5 s; temperature 37°C), with p = 0.0094. Firing resumed in the 17–22 s interval (2.30 ± 0.51 AP per 5 s; temperature = 37–38°C), with a p-value of 0.3858. All p-values were calculated by unpaired T-test and n = 20 in all cases (Figures 6E,F).
In contrast, Ano1/TMEM16A-, MNP+ neurons showed no significant change in firing rates with AMF heating. Firing rate at 37°C, before AMF application was 2.20 ± 0.50 AP per 5 s. During 2–7 s (38–40°C), the rate was 2.13 ± 0.48 AP per 5 s, giving a p-value of 0.9245; while a rate of 2.53 ± 0.49 AP per 5 s was seen during the during 7–12 s (38–39°C) duration, with a p-value of 0.6364; and the 17–22 s (37–38°C) period gave a rate of 3.53 ± 0.61 AP per 5 s, the p-value being 0.1044. All p-values were calculated by unpaired T-test and n = 15 in all cases (Figures 6G,H).
Suppression Ratio in Magnetothermal Silencing
We quantified the reduction in AP firing in Ano1/TMEM16A+, MNP+ neurons by calculating the Ca2+ activity suppression ratio. To calculate the suppression ratio, we first numerically integrated the bleach corrected, baseline subtracted, normalized GCaMP6f signal. A reduction of the slope of the linear fit of the integrated GCaMP6f signal curve indicates a decline of Ca2+ activities, while an increased slope indicates increasing activity (Figure 2E). The slopes of the integrated GCaMP6f signal of Ano1/TMEM16A+, MNP+ neurons were analyzed during three distinct time periods: one prior to AMF application (baseline Ca2+ activity rate at 37°C, within -20 to -2 s), one during magnetothermal silencing (lying within 2–22 s, with temperature > 37°C) and a final period, when Ca2+ activities resumed to baseline levels (between 22 and 30 s). In Figure 7A, a reduced slope is observed in the pooled integration plot, following the AMF application. This corresponds to the silenced period, which is followed by the resumption of Ca2+ activities, marked by an increasing slope. During the silenced state, the slope was suppressed by a suppression ratio S = 82.04 ± 8.84% compared to the baseline slope. The silenced slope was significantly different from the baseline slope [p-value = 0.028 (n = 12, unpaired T-test)]. The median suppression ratio was 95.45%, while the third quartile was at 67.99%. After normal firing resumed, the slope was indistinguishable from the baseline slope (reduction was -8.98 ± 28.98%) (Figure 7B).
FIGURE 7
Similar analysis on Ano1/TMEM16A-, MNP+ neurons (Figure 7D) showed no significant suppression: suppression ratio of 6.02 ± 12.88% in the period following AMF application (between 2 and 22 s) and 7.74 ± 44.20% long after the AMF was turned off (between 22 and 30 s), (p-value = 0.615, n = 16, T-test) (Figure 7E). This ascertains that magnetothermal silencing was unique to Ano1+/TMEM16A+ neurons.
Latency and Duration of Magnetothermal Silencing
To determine latency and duration of magnetothermal silencing of Ano1/TMEM16A+, MNP+ neurons, we determined the time (with AMF start at time = 0 s) of the intersection points of the sectional fitting lines (indicated by 1 and 2 in Figure 2E). Intersection of the slope of baseline activity with the slope of the silenced period defines the beginning of inactivation and hence the latency of silencing. Similarly, the intersection of slope during silencing with the slope of the recovered activity defines the end of silencing. We found the latency of silencing in Ano1/TMEM16A+, MNP+ neurons to be 1.88 ± 0.48 s (after the start of AMF). The end of silencing was observed at 13.93 ± 2.02 s, giving a silencing period of 12.05 ± 2.48 s for 5 s long and 28.87 ± 1.03 kA/m at 412.5 kHz AMF (Figure 7C).
Discussion
In this work, we extended the magnetothermal neuro-modulation technique to silencing neuronal activity, using the thermosensitive chloride channel, Ano1/TMEM16A. Similar to neuronal activation, using TRPV1 ion channels, only 2–3 degrees above the physiological temperature was sufficient to induce significant suppression in firing. For 5 s alternating magnetic field applications, the cells fell silent within 2 s and remained silent for more than 10 s before resuming AP firing. The latency may be tuned by heating efficiency and number of the magnetic nanoparticles attached to the membrane, as well as parameters of the applied alternating magnetic field. The duration can be extended by maintaining an elevated temperature using pulsed AMF application.
Magnetothermal silencing uses the same nanoparticles, targeting method and field application as magnetothermal excitation, just a different ion channel. Hence, the approach can be extended to in vivo applications following the procedures of magnetothermal neuronal activation (Munshi et al., 2017). Magnetothermal neuromodulation is minimally invasive, relying only on the delivery of the virus and nanoparticle to the brain region, either done by stereotactic injection or via focused ultrasound-based opening of the blood–brain barrier. Therefore, the preparation work required per animal is small compared to methods requiring implantation of a device. Also, after the wound heals, treated and untreated animals are identical to each other and non-tethered, allowing for unbiased and complex social and behavioral studies.
Generation of the AMF requires integrated high frequency transformer driven resonant capacitor-inductor systems. These are available in form of electronically stabilized, real time programmable commercial units with customizable coils (Ambrell, MSI Automation and others), or as custom builds by research groups (Stauffer et al., 1994; Kallumadil et al., 2012; Subramanian et al., 2016). Applications involving freely moving animals or scaling up to human dimensions, requires large area coils with large currents (Christiansen et al., 2017), but there is no fundamental size limit.
Nanoparticles with higher heating efficiency are still being developed, lowering the AMF requirements (Lee et al., 2011; Chen R. et al., 2013; Zhang et al., 2015; He et al., 2018). An upper limit of AMF power was determined by its effect on biological tissue, which depends on the product of AMF field strength and frequency (Young et al., 1980), while the heating capacity of the magnetic nanoparticles is generally given by the product of the square of field strength and frequency (Rosensweig, 2002). Laboratory synthesized nanoparticles require encapsulation in biopolymers to be biocompatible and to remain stable in suspension inside the body over long periods of time. Already biocompatible alternatives are natural or engineered biosynthesized magnetite nanoparticles from bacteria (Hergt et al., 2005; Fantechi et al., 2014; Elfick et al., 2017; Marcano et al., 2018). Genetically controlled in situ syntheses of nanoparticles in neurons could in the future completely remove the need for particle delivery but so far has failed to produce particles showing clear heating (Wesolowski et al., 2009; Pollithy et al., 2011; Stanley et al., 2015).
Thermal activation of Ano1/TMEM16A has been shown to directly induce inward Cl- currents. However, intracellular Ca2+ concentration and membrane voltage play a synergistic role in the channels activation, lowering the threshold temperature to near physiological temperatures (Cho et al., 2012). Ano1/TMEM16A has been found in the peripheral nervous system, closely coupled with TRPV1 (transient receptor potential cation channel subfamily V member 1) and is significant in pain enhancement mechanism (Takayama et al., 2015; Oh and Jung, 2016). In the hippocampus, presence of Ano2/TMEM16B, a heat sensitive paralog of Ano1/TMEM16A has been shown to shorten the duration of AP spikes (Huang et al., 2012). Hence, Ano1/TMEM16A overexpression (in the absence of coupled thermosensitive Ca2+ conducting channels) can serve as the ideal strategy for inhibitory heat sensitization in central nervous system (CNS) neurons, without eliciting traits of nociception. As Ano1/TMEM16A channels are mammalian ion channels, they target well to the neuronal membrane and are efficient chloride channels (Terashima et al., 2013; Pedemonte and Galietta, 2014). Overexpression of Ano1/TMEM16A in HEK293 cells was found to induce small Cl- currents, resulting from partial activation at 37°C (Schreiber et al., 2018). Applying the channel for silencing in the mammalian brain may benefit from shifting the activation temperature slightly higher, although this was not necessary for TRPV1 which shows also some activation at 37°C when over-expressed. Although the gene encoding Ano1/TMEM16A is too large to be delivered using AAV, we have successfully used Lentivirus to deliver Ano1/TMEM16A to neurons.
Conclusion
Magnetothermal genetic silencing offers a minimally invasive alternative to optogenetic silencing with the advantages of easy deep tissue penetration of AMF, no requirement for any tether or external marking of the animals, and the possibility for prolonged silencing without the undesired effects of blue light induced photo-toxicity (Grzelak et al., 2001; Dixit and Cyr, 2003; Davies, 2004) and photoinduced tissue heating (Christie et al., 2013), affecting blood flow (Rungta et al., 2017).
Statements
Author contributions
AP conceived the project. AP, RM, and SQ contributed to design of the research. RM and SQ performed the cell silencing experiments and imaging. RM analyzed the data, wrote the procedures, and prepared the figures. RM and AP wrote the manuscript. All authors reviewed the manuscript.
Funding
This work was supported by NIH grants supported by HSFP project grant RGP0052/2012 and NIMH grants R01-MH094730 and R01-MH111872.
Acknowledgments
We thank Sara D. Parker and Jason Myers (University at Buffalo) for molecular cloning and culturing of hippocampal rat neurons. pGP-CMV-GCaMP6f was a gift from Douglas Kim (Addgene plasmid # 40755); mANO1/TMEM16A-eGFP and mANO1/TMEM16A-mCherry were gifts from H. Criss Hartzell, Jr. (Emory University). A previous version of this article was published as preprint on www.biorxiv.org (Munshi et al., 2018)1.
Conflict of interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
References
1
ArmbrusterB. N.LiX.PauschM. H.HerlitzeS.RothB. L. (2007). Evolving the lock to fit the key to create a family of G protein-coupled receptors potently activated by an inert ligand.Proc. Natl. Acad. Sci. U.S.A.1045163–5168. 10.1073/pnas.0700293104
2
BerndtA.LeeS. Y.RamakrishnanC.DeisserothK. (2014). Structure-guided transformation of channelrhodopsin into a light-activated chloride channel.Science344420–424. 10.1126/science.1252367
3
BrewerG. J. (1997). Isolation and culture of adult rat hippocampal neurons.J. Neurosci. Methods71143–155. 10.1016/S0165-0270(96)00136-7
4
Castellanos-RubioI.MunshiR.QadriS.PralleA. (2018). Nanoparticle preparation for magnetothermal genetic stimulation in cell culture and in the brain of live rodents.Neuromethods13539–51. 10.1007/978-1-4939-75846_4
5
ChenR.ChristiansenM. G.AnikeevaP. (2013). Maximizing hysteretic losses in magnetic ferrite nanoparticles via model-driven synthesis and materials optimization.ACS Nano78990–9000. 10.1021/nn4035266
6
ChenR.RomeroG.ChristiansenM. G.MohrA.AnikeevaP. (2015). Wireless magnetothermal deep brain stimulation.Science3471477–1480. 10.1126/science.1261821
7
ChenS.WeitemierA. Z.ZengX.HeL.WangX.TaoY.et al (2018). Near-infrared deep brain stimulation via upconversion nanoparticle–mediated optogenetics.Science359679–684. 10.1126/science.aaq1144
8
ChenT. W.WardillT. J.SunY.PulverS. R.RenningerS. L.BaohanA.et al (2013). Ultrasensitive fluorescent proteins for imaging neuronal activity.Nature499295–300. 10.1038/nature12354
9
ChoH.YangY. D.LeeJ.LeeB.KimT.JangY.et al (2012). The calcium-activated chloride channel anoctamin 1 acts as a heat sensor in nociceptive neurons.Nat. Neurosci.151015–1021. 10.1038/nn.3111
10
ChowB. Y.HanX.DobryA. S.QianX.ChuongA. S.LiM.et al (2010). High-performance genetically targetable optical neural silencing by light-driven proton pumps.Nature46398–102. 10.1038/nature08652
11
ChristiansenM. G.HoweC. M.BonoD. C.PerreaultD. J.AnikeevaP.ChristiansenM. G.et al (2017). Practical methods for generating alternating magnetic fields for biomedical research.Rev. Sci. Instrum.88:084301. 10.1063/1.4999358
12
ChristieI. N.WellsJ. A.SouthernP.MarinaN.KasparovS.GourineA. V. (2013). FMRI response to blue light delivery in the naïve brain: implications for combined optogenetic fMRI studies.Neuroimage66634–641. 10.1016/j.neuroimage.2012.10.074
13
DaviesM. J. (2004). Reactive species formed on proteins exposed to singlet oxygen.Photochem. Photobiol. Sci.317–25. 10.1039/b307576c
14
DeisserothK. (2015). Optogenetics: 10 years of microbial opsins in neuroscience.Nat. Neurosci.181213–1225. 10.1038/nn.4091
15
DeneuxT.KaszasA.SzalayG.KatonaG.LaknerT.GrinvaldA.et al (2016). Accurate spike estimation from noisy calcium signals for ultrafast three-dimensional imaging of large neuronal populations in vivo.Nat. Commun.7:12190. 10.1038/ncomms12190
16
DesaiN. S.RutherfordL. C.TurrigianoG. G. (1999). Plasticity in the intrinsic excitability of cortical pyramidal neurons.Nat. Neurosci.2515–520. 10.1038/9165
17
DixitR.CyrR. (2003). Cell damage and reactive oxygen species production induced by fluorescence microscopy: effect on mitosis and guidelines for non-invasive fluorescence microscopy.Plant J.36280–290. 10.1046/j.1365-313X.2003.01868.x
18
EdelsteinA.AmodajN.HooverK.ValeR.StuurmanN. (2010). Computer control of microscopes using manager.Curr. Protoc. Mol. Biol.9214.20.1–14.20.17. 10.1002/0471142727.mb1420s92
19
ElfickA.RischitorG.MourasR.AzferA.LungaroL.UhlarzM.et al (2017). Biosynthesis of magnetic nanoparticles by human mesenchymal stem cells following transfection with the magnetotactic bacterial gene mms6.Sci. Rep.7:39755. 10.1038/srep39755
20
FantechiE.InnocentiC.ZanardelliM.FittipaldiM.FalvoE.CarboM.et al (2014). A smart platform for hyperthermia application in cancer treatment: cobalt-doped ferrite nanoparticles mineralized in human ferritin cages.ACS Nano84705–4719. 10.1021/nn500454n
21
FeyenP.ColomboE.EndemanD.NovaM.LaudatoL.MartinoN.et al (2016). Light-evoked hyperpolarization and silencing of neurons by conjugated polymers.Sci. Rep.6:22718. 10.1038/srep22718
22
GovorunovaE. G.SineshchekovO. A.JanzR.LiuX.SpudichJ. L. (2015). Natural light-gated anion channels: a family of microbial rhodopsins for advanced optogenetics.Science349647–650. 10.1126/science.aaa7484
23
GovorunovaE. G.SineshchekovO. A.RodarteE. M.JanzR.MorelleO.MelkonianM.et al (2017). The expanding family of natural anion channelrhodopsins reveals large variations in kinetics. conductance, and spectral sensitivity.Sci. Rep.7:43358. 10.1038/srep43358
24
GrzelakA.RychlikB.BartoszG. (2001). Light-dependent generation of reactive oxygen species in cell culture media.Free Radic. Biol. Med.301418–1425. 10.1016/S0891-5849(01)00545-7
25
HeS.ZhangH.LiuY.SunF.YuX.LiX.et al (2018). Maximizing specific loss power for magnetic hyperthermia by hard – soft mixed ferrites.Small14:180013510.1002/smll.201800135
26
HergtR.HiergeistaR.ZeisbergeraM.SchülerbD.HeyenU.HilgerI.et al (2005). Magnetic properties of bacterial magnetosomes as potential diagnostic and therapeutic tools.J. Magn. Magn. Mater.29380–86. 10.1016/j.jmmm.2005.01.047
27
HochbaumD. R.ZhaoY.FarhiS. L.KlapoetkeN.WerleyC. A.KapoorV.et al (2014). All-optical electrophysiology in mammalian neurons using engineered microbial rhodopsins.Nat. Methods11825–833. 10.1038/nmeth.3000
28
HodgeJ. J. L. (2009). Ion channels to inactivate neurons in Drosophila.Front. Mol. Neurosci.2:13. 10.3389/neuro.02.013.2009
29
HuangF.RockJ. R.HarfeB. D.ChengT.HuangX.JanY. N.et al (2009). Studies on expression and function of the TMEM16A calcium-activated chloride channel.Proc. Natl. Acad. Sci. U.S.A.10621413–21418. 10.1073/pnas.0911935106
30
HuangH.DelikanliS.ZengH.FerkeyD. M.PralleA. (2010). Remote control of ion channels and neurons through magnetic-field heating of nanoparticles.Nat. Nanotechnol.5602–606. 10.1038/nnano.2010.125
31
HuangW. C.XiaoS.HuangF.HarfeB. D.JanY. N.JanL. Y. (2012). Calcium-activated chloride channels (caccs) regulate action potential and synaptic response in hippocampal neurons.Neuron74179–192. 10.1016/j.neuron.2012.01.033
32
JiangM.ChenG. (2006). High Ca2+-phosphate transfection efficiency in low-density neuronal cultures.Nat. Protoc.1695–700. 10.1038/nprot.2006.86
33
KallumadilM.AbeM.UedaT.HandaH. (2012). Optimisation of flux concentrator-coil design for application in magnetic hyperthermia.J. Phys. Conf. Ser.352:12034. 10.1088/1742-6596/352/1/012034
34
KimC. K.AdhikariA.DeisserothK. (2017). Integration of optogenetics with complementary methodologies in systems neuroscience.Nat. Rev. Neurosci.18222–235. 10.1038/nrn.2017.15
35
LeeJ. H.JangJ. T.ChoiJ. S.MoonS. H.NohS. H.KimJ. W.et al (2011). Exchange-coupled magnetic nanoparticles for efficient heat induction.Nat. Nanotechnol.6418–422. 10.1038/nnano.2011.95
36
LerchnerW.XiaoC.NashmiR.SlimkoE. M.van TrigtL.LesterH. A.et al (2007). Reversible silencing of neuronal excitability in behaving mice by a genetically targeted. ivermectin-gated cl- channel.Neuron5435–49. 10.1016/j.neuron.2007.02.030
37
LinC. A. J.SperlingR. A.LiJ. K.YangT. Y.WalterH. J.et al (2008). Design of an amphiphilic polymer for nanoparticle coating and functionalization.Small4334–341. 10.1002/smll.200700654
38
LinX.ChenX.ZhangW.SunT.FangP.LiaoQ.et al (2018). Core-shell-shell upconversion nanoparticles with enhanced emission for wireless optogenetic inhibition.Nano Lett.18948–956. 10.1021/acs.nanolett.7b04339
39
LinX.WangY.ChenX.YangR.WangZ.FengJ.et al (2017). Multiplexed optogenetic stimulation of neurons with spectrum-selective upconversion nanoparticles.Adv. Healthc. Mater.61–11. 10.1002/adhm.201700446
40
MarcanoL.MuñozD.Martín-RodríguezR.OrueI.AlonsoJ. J.García-PrietoA.et al (2018). Magnetic Study of co-doped magnetosome chains.J. Phys. Chem. C1227541–7550. 10.1021/acs.jpcc.8b01187
41
MunshiR.QadriS. M.ZhangQ.RubioI. C.del PinoP.PralleA.et al (2017). Magneto-thermal genetic deep brain stimulation of motor behaviors in awake, freely moving mice.eLife6:e27069. 10.7554/eLife.27069
42
NomuraH.HaraK.AbeR.Hitora-ImamuraN.NakayamaR.SasakiT.et al (2015). Memory formation and retrieval of neuronal silencing in the auditory cortex.Proc. Natl. Acad. Sci. U.S.A.1129740–9744. 10.1073/pnas.1500869112
43
OhU.JungJ. (2016). Cellular functions of TMEM16/anoctamin.Pflugers Arch. Eur. J. Physiol.468443–453. 10.1007/s00424-016-1790-0
44
OkazakiA.SudoY.TakagiS. (2012). Optical silencing of C. elegans cells with arch proton pump.PLoS One7:e35370. 10.1371/journal.pone.0035370
45
OkazakiA.TakahashiM.ToyodaN.TakagiS. (2014). Optical silencing of C. elegans cells with light-driven proton pumps.Methods68425–430. 10.1016/j.ymeth.2014.02.030
46
OlesonJ. R. (1982). Hyperthermia by magnetic induction: I. Physical characteristics of the technique.Int. J. Radiat. Oncol. Biol. Phys.81747–1756. 10.1016/0360-3016(82)90297-8
47
ParkI. J.BobkovY. V.AcheB. W.PrincipeJ. C. (2013). Quantifying bursting neuron activity from calcium signals using blind deconvolution.J. Neurosci. Methods218196–205. 10.1016/j.jneumeth.2013.05.007
48
PaulinoC.KalienkovaV.LamA. K. M.NeldnerY.DutzlerR. (2017a). Activation mechanism of the calcium-activated chloride channel TMEM16A revealed by cryo-EM.Nature552421–425. 10.1038/nature24652
49
PaulinoC.NeldnerY.NeldnerY.LamA. K.KalienkovaV.BrunnerJ. D.et al (2017b). Structural basis for anion conduction in the calcium-activated chloride channel TMEM16A.eLife6:e26232. 10.7554/eLife.26232
50
PedemonteN.GaliettaL. J. V. (2014). Structure and function of TMEM16 Proteins (Anoctamins).Physiol. Rev.94419–459. 10.1152/physrev.00039.2011
51
PnevmatikakisE. A.SoudryD.GaoY.MachadoT. A.MerelJ.PfauD.et al (2016). Simultaneous denoising. deconvolution, and demixing of calcium imaging data.Neuron89285–299. 10.1016/j.neuron.2015.11.037
52
PollithyA.RomerT.LangC.MüllerF. D.HelmaJ.LeonhardtH.et al (2011). Magnetosome expression of functional camelid antibody fragments (nanobodies) in Magnetospirillum gryphiswaldense.Appl. Environ. Microbiol.776165–6171. 10.1128/AEM.05282-11
53
RaimondoJ. V.KayL.EllenderT. J.AkermanC. J. (2012). Optogenetic silencing strategies differ in their effects on inhibitory synaptic transmission.Nat. Neurosci.151102–1104. 10.1038/nn.3143
54
RosensweigR. E. (2002). Heating magnetic fluid with alternating magnetic field.J. Magn. Magn. Materials252370–374. 10.1016/S0304-8853(02)00706-0
55
RungtaR. L.OsmanskiB. F.BoidoD.TanterM.CharpakS. (2017). Light controls cerebral blood flow in naive animals.Nat. Commun.8:14191. 10.1038/ncomms14191
56
SchreiberR.OusingsawatJ.WanitchakoolP.SirianantL.BenedettoR.ReissK.et al (2018). Regulation of TMEM16A/ANO1 and TMEM16F/ANO6 ion currents and phospholipid scrambling by Ca2+and plasma membrane lipid.J. Physiol.596217–229. 10.1113/JP275175
57
SlimkoE. M.McKinneyS.AndersonD. J.DavidsonN.LesterH. A. (2002). Selective electrical silencing of mammalian neurons in vitro by the use of invertebrate ligand-gated chloride channels.J. Neurosci.227373–7379. 10.1523/JNEUROSCI.22-17-07373.2002
58
StachniakT. J.GhoshA.SternsonS. M. (2014). Chemogenetic synaptic silencing of neural circuits localizes a hypothalamus?midbrain pathway for feeding behavior.Neuron82797–808. 10.1016/j.neuron.2014.04.008
59
StanleyS. A.SauerJ.KaneR. S.DordickJ. S.FriedmanJ. M. (2015). Remote regulation of glucose homeostasis in mice using genetically encoded nanoparticles.Nat. Med.2192–98. 10.1038/nm.3730
60
StaufferP. R.SneedP. K.HashemiH.PhillipsT. L. (1994). Practical induction heating coil designs for clinical hyperthermia with ferromagnetic implants.IEEE Trans. Biomed. Eng.4117–28. 10.1109/10.277267
61
SubramanianM.MiaskowskiA.PearcemG.DobsonJ. (2016). A coil system for real-time magnetic fluid hyperthermia microscopy studies.Int. J. Hyperthermia32112–120. 10.3109/02656736.2015.1104732
62
SudoY.OkazakiA.OnoH.YagasakiJ.SugoS.KamiyaM.et al (2013). A blue-shifted light-driven proton pump for neural silencing.J. Biol. Chem.28820624–20632. 10.1074/jbc.M113.475533
63
TakayamaY.UtaD.FurueH.TominagaM. (2015). Pain-enhancing mechanism through interaction between TRPV1 and anoctamin 1 in sensory neurons.Proc. Natl. Acad. Sci. U.S.A.1125213–5218. 10.1073/pnas.1421507112
64
TerashimaH.PicolloA.AccardiA. (2013). Purified TMEM16A is sufficient to form Ca2+-activated Cl- channels.Proc. Natl. Acad. Sci. U.S.A11019354–19359. 10.1073/pnas.1312014110
65
VardyE.RobinsonJ. E.LiC.OlsenR. H. J.DiBertoJ. F.GiguereP. M.et al (2015). A new DREADD facilitates the multiplexed chemogenetic interrogation of behavior.Neuron86936–946. 10.1016/j.neuron.2015.03.065
66
VogelsteinJ. T.PackerA. M.MachadoT. A.SippyT.BabadiB.YusteR.et al (2010). Fast nonnegative deconvolution for spike train inference from population calcium imaging.J. Neurophysiol.1043691–3704. 10.1152/jn.01073.2009
67
WardenM. R.CardinJ. A.DeisserothK. (2014). Optical neural interfaces.Annu. Rev. Biomed. Eng.16103–129. 10.1146/annurev-bioeng-071813-104733
68
WeirG. A.MiddletonS. J.ClarkA. J.DanielT.KhovanovN.McMahonS. B.et al (2017). Using an engineered glutamate-gated chloride channel to silence sensory neurons and treat neuropathic pain at the source.Brain1402570–2585. 10.1093/brain/awx201
69
WesolowskiJ.AlzogarayV.ReyeltJ.UngerM.JuarezK.UrrutiaM.et al (2009). Single domain antibodies: promising experimental and therapeutic tools in infection and immunity.Med. Microbiol. Immunol.198157–174. 10.1007/s00430-009-0116-7
70
WiegertJ. S.MahnM.PriggeM.PrintzY.YizharO. (2017). Silencing neurons: tools. applications, and experimental constraints.Neuron95504–529. 10.1016/j.neuron.2017.06.050
71
WietekJ.BeltramoR.ScanzianiM.HegemannP.OertnerT. G.WiegertJ. S. (2015). An improved chloride-conducting channelrhodopsin for light-induced inhibition of neuronal activity in vivo.Sci. Rep.5:14807. 10.1038/srep14807
72
WietekJ.WiegertJ. S.AdeishviliN.SchneiderF.WatanabeH.TsunodaS. P.et al (2014). Conversion of channelrhodopsin into a light-gated chloride channel.Science344409–412. 10.1126/science.1249375
73
YaksiE.FriedrichR. W. (2006). Reconstruction of firing rate changes across neuronal populations by temporally deconvolved Ca2+ imaging.Nat. Methods3377–383. 10.1038/nmeth874
74
YangY. D.ChoH.KooJ. Y.TakM. H.ChoY.ShimW. S.et al (2008). TMEM16A confers receptor-activated calcium-dependent chloride conductance.Nature4551210–1215. 10.1038/nature07313
75
YooS.HongS.ChoiY.ParkJ. H.NamY. (2014). Photothermal inhibition of neural activity with near-infrared-sensitive nanotransducers.ACS Nano88040–8049. 10.1021/nn5020775
76
YoungJ. H.WangM.-T.BrezovichI. A. (1980). Frequency/depth-penetration considerations in hyperthermia by magnetically induced currents.Electron. Lett.16358–359. 10.1049/el:19800255
77
ZhangQ.Castellanos-RubioI.MunshiR.OrueI.PelazB.Ines GriesK.et al (2015). Model driven optimization of magnetic anisotropy of exchange-coupled core-shell ferrite nanoparticles for maximal hysteretic loss.Chem. Mater.277380–7387. 10.1021/acs.chemmater.5b03261
Summary
Keywords
magnetothermal, magnetogenetic, remote silencing, anoctamin 1, chloride channel
Citation
Munshi R, Qadri SM and Pralle A (2018) Transient Magnetothermal Neuronal Silencing Using the Chloride Channel Anoctamin 1 (TMEM16A). Front. Neurosci. 12:560. doi: 10.3389/fnins.2018.00560
Received
06 June 2018
Accepted
25 July 2018
Published
14 August 2018
Volume
12 - 2018
Edited by
Alexander Dityatev, Helmholtz-Gemeinschaft Deutscher Forschungszentren (HZ), Germany
Reviewed by
Lorenzo A. Cingolani, Istituto Italiano di Tecnologia, Italy; Michael Thomas Lippert, Leibniz Institute for Neurobiology (LG), Germany
Updates
Copyright
© 2018 Munshi, Qadri and Pralle.
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Arnd Pralle, apralle@buffalo.edu
This article was submitted to Neural Technology, a section of the journal Frontiers in Neuroscience
Disclaimer
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.