ORIGINAL RESEARCH article
Front. Earth Sci.
Sec. Earth and Planetary Materials
Volume 13 - 2025 | doi: 10.3389/feart.2025.1606868
This article is part of the Research TopicAdvances in Structure, Characterization, and Failure Mechanisms of Geomaterials: Theoretical, Experimental, and Numerical ApproachesView all 12 articles
Experimental study on water migration in unsaturated loess under an electric field: Optimization of electrode material
Provisionally accepted
- 1Xi'an University of Architecture and Technology, Xi'an, China
- 2China Construction Eighth Bureau Engineering Research Institute, China Construction Eighth Engineering Division (China), pudong, Shanghai, China
Select one of your emails
You have multiple emails registered with Frontiers:
Notify me on publication
Please enter your email address:
If you already have an account, please login
You don't have a Frontiers account ? You can register here
Electroosmosis method is an environmentally friendly and low-carbon foundation treatment technique that can quickly improve soil shear strength. To investigate the effect of electric potential on water migration in unsaturated loess, this study employed a custom-designed one-dimensional laboratory experimental device to conduct electroosmosis experiments with six different electrode materials: copper, aluminum, stainless steel, nickel, graphite, and iron. Changes in water content within the unsaturated loess were monitored before and after the experiments. The internal current, electric potential distribution, interface resistance, and soil resistivity were observed during the experiments. The results indicated that: (1) the maximum and minimum water migration amounts were 8% and 3.4%, respectively, with the maximum being 2.35 times the minimum. The preferred ranking of electrode materials for soil water migration efficiency was stainless steel > nickel > graphite > aluminum > copper > iron.(2) The effective electric potential of soil samples across all six test soil samples continuously decreased with increasing electrification duration, while the current initially increased and then decreased. The interface resistance continuously increased, while the soil resistivity for graphite electrode rapidly increased over time. Based on the variations in various parameters and energy efficiency during the experiments, the optimal ranking of electrode materials was as follows: graphite > stainless steel > nickel > aluminum > copper > iron; (3) Due to their high energy utilization rates and strong corrosion resistance, stainless steel, nickel, and graphite are recommended as the preferred electrode materials for both laboratory and field tests. In practical engineering applications, moisture migration volume is prioritized; thus, the final electrode selection order is: stainless steel > nickel > graphite > aluminum > copper > iron.
Keywords: Unsaturated loess, Electric potential effect, Water migration, Optimal ranking of electrode materials, Experimental study
Received: 06 Apr 2025; Accepted: 02 Jun 2025.
Copyright: © 2025 Jiao, He, Wang and Zhang. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence: Zhiheng He, Xi'an University of Architecture and Technology, Xi'an, China
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.