An Erratum on
Modelling fatigue induced change in hyperelastic response of SBR/NR blends
by Nambiar A and Mythravaruni P (2025). Front. Mech. Eng. 11:1514002. doi: 10.3389/fmech.2025.1514002
Due to a production error, there was a mistake in Equations 6, 8, 9 and the last, unnumbered equation as published. The corrected equations appear below.
The publisher apologizes for this mistake. The original version of this article has been updated.
Keywords: hyperelasicity, fatigue, ABAQUS, yeoh model, rubber, MATLAB, energy limiter
Citation: Frontiers Production Office (2025) Erratum: Modelling fatigue induced change in hyperelastic response of SBR/NR blends. Front. Mech. Eng. 11:1609995. doi: 10.3389/fmech.2025.1609995
Received: 11 April 2025; Accepted: 11 April 2025;
Published: 22 April 2025.
Approved by:
Frontiers Editorial Office, Frontiers Media SA, SwitzerlandCopyright © 2025 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Frontiers Production Office, cHJvZHVjdGlvbi5vZmZpY2VAZnJvbnRpZXJzaW4ub3Jn