Skip to main content

ORIGINAL RESEARCH article

Front. Nutr., 13 October 2023
Sec. Nutrition Methodology
This article is part of the Research Topic Databases and Nutrition, volume II View all 14 articles

Determining classes of food items for health requirements and nutrition guidelines using Gaussian mixture models

  • 1Biostatistics Research Unit, South African Medical Research Council, Durban, South Africa
  • 2School of Mathematics, Statistics and Computer Science, University of KwaZulu-Natal, Pietermaritzburg, South Africa
  • 3Department of Statistics, University of Pretoria, Pretoria, South Africa
  • 4Biostatistics Research Unit, SAFOODS Division, South African Medical Research Council, Cape Town, South Africa
  • 5Division of Human Nutrition, Department of Global Health, Stellenbosch University, Cape Town, South Africa

Introduction: The identification of classes of nutritionally similar food items is important for creating food exchange lists to meet health requirements and for informing nutrition guidelines and campaigns. Cluster analysis methods can assign food items into classes based on the similarity in their nutrient contents. Finite mixture models use probabilistic classification with the advantage of taking into account the uncertainty of class thresholds.

Methods: This paper uses univariate Gaussian mixture models to determine the probabilistic classification of food items in the South African Food Composition Database (SAFCDB) based on nutrient content.

Results: Classifying food items by animal protein, fatty acid, available carbohydrate, total fibre, sodium, iron, vitamin A, thiamin and riboflavin contents produced data-driven classes with differing means and estimates of variability and could be clearly ranked on a low to high nutrient contents scale. Classifying food items by their sodium content resulted in five classes with the class means ranging from 1.57 to 706.27 mg per 100 g. Four classes were identified based on available carbohydrate content with the highest carbohydrate class having a mean content of 59.15 g per 100 g. Food items clustered into two classes when examining their fatty acid content. Foods with a high iron content had a mean of 1.46 mg per 100 g and was one of three classes identified for iron. Classes containing nutrient-rich food items that exhibited extreme nutrient values were also identified for several vitamins and minerals.

Discussion: The overlap between classes was evident and supports the use of probabilistic classification methods. Food items in each of the identified classes were comparable to allowed food lists developed for therapeutic diets. This data-driven ranking of nutritionally similar classes could be considered for diet planning for medical conditions and individuals with dietary restrictions.

1. Introduction

The study of single nutrients in food items has played an important role in our understanding of the basic causes and treatment strategies of nutrition-related diseases (1). Establishing the relationships between specific nutrients and food items and determining the association between specific nutrient intakes and diseases, may help with the interpretation of dietary patterns found in a population and the explanation of the association between dietary patterns and disease (2). In addition, a reasonable first step toward the development of food-based dietary guidelines (FBDGs) is identifying the food sources of the nutrient of interest. This information can be ascertained from food composition databases (FCDBs) and understanding food items and their nutrients promotes a basic knowledge of nutrition amongst the population (3). The analysis of dietary patterns is dependent on the categorization of food items but the rules determining this categorization, which are based on conceptual and compositional similarity, are not always well-defined (2).

The need to group foods by nutritional content was recognized by Khan (4) who proposed categorizing foods as having a either a low, medium or high specific nutrient content to assist dietitians with food recommendations. However, the proposed category thresholds were suggestive and a more rigorous method of determining the thresholds was needed. More recently, a more suitable, data-driven categorization was proposed, using k-means clustering to group foods by nutrient content (5). Other methods that have been used to classify food items are hierarchical clustering, principal component analysis (PCA), factor analysis and fuzzy clustering (6). Thus, employing statistical clustering methods to food composition data can produce objectively determined classes. A previous study (7) applied PCA to food composition data to identify nutritionally similar groups. However, evaluating similar food items through PCA does not account for the uncertainty in assigning food items to classes. In addition, while food items were able to be grouped by overall nutritional similarity, food items were unable to be ranked by the level of a specific nutrient content. The ability to rank food items by the level of nutrients is essential for creating food lists for therapeutic diets. Some common therapeutic diets that involve nutrient modification are renal diets for the management of chronic kidney disease (8) and low carbohydrate diets for the management of diabetes (9).

A recent review has shown that mostly centroid-based and hierarchical clustering techniques have been applied to food composition data (6) but mixture models have yet to be investigated in this context. The application of mixture models to identify dietary patterns in food consumption studies has shown advantages over nonparametric approaches (10, 11). Nonparametric approaches result in classes wherein each food item belongs exclusively to one class, thus assuming that the classification uncertainty is zero. However, if arbitrary thresholds existed to separate low and high nutrient content foods, there is a weak separation between food items containing nutrient levels that are near the threshold. Mixture models accommodate for this uncertainty by measuring the probability of class membership, which takes values between zero and one (10). With probabilistic clustering, the focus is not on whether a food is in a class, but rather to what extent it is associated with that class (12). The consideration of the uncertainty in determining nutritional classes allows for greater precision and reduced allocation bias (13).

Probabilistic clustering or distribution-based clustering assumes that the nutrient values are generated by a mixture of probability distributions and that each distribution forms a class. Each food item is assigned a probability of class membership (these being the posterior probabilities), thus supporting multiple class membership and also the assignment of outliers to classes. The most popular algorithm of this approach is the Gaussian mixture model (GMM). For a dataset of n food items that one wants to classify into k compositionally similar groups, the GMM assumes that the overall nutrient content distribution consists of a mixture of k Gaussian (normal) distributions. In this study, we apply univariate GMMs to food composition data to determine classes that contain similar levels of specific nutrients and to allow for the estimation of the class membership probabilities for each food item.

2. Materials and methods

2.1. Data

The 2017 SAFCDB (11) contains nutritional information for 1,667 food items and 169 food components (hereon termed ‘nutrients’). The compilation of food composition data for the SAFCDB comprises various number of data sources ranging from national projects involving direct methods and indirect methods, to the sourcing of scientific literature, certificate of analyses and product nutritional information from various data generators.

Of the 169 food components, we selected the most common nutrients with the least amount of missing values for inclusion. We also considered nutrients that were non-collinear. For example, since total carbohydrate is the sum of available carbohydrate and dietary fibre, available carbohydrate and dietary fibre were included instead of total carbohydrate. Using these criteria, we selected 28 nutrients (nine macronutrients, nine minerals and ten vitamins) for analysis and included food items (n = 971) which had non-missing nutrient information for all 28 nutrients.

For each of the 28 nutrients, each of the 971 food items had either a known nutrient value, a zero nutrient value or a trace value. Food items with a zero nutrient value for a particular nutrient are excluded from the univariate GMM analysis since we are interested in classifying only food items known to have the nutrient of interest. Trace values were imputed with half the limit of detection for each nutrient (14). Thus, only food items containing either a known nutrient value or trace value are included in the analysis. Extreme nutrient values were retained in the dataset. Raw food items, cooked food items and combined dishes (where nutrient composition has been calculated using standard recipes) from various food groups were included in the analysis (Table 1). All nutrient values were expressed per 100 g edible part.

TABLE 1
www.frontiersin.org

Table 1. Number of food items analyzed by food group.

2.2. Methods

2.2.1. Univariate Gaussian mixture model

In the case of food composition data, the univariate Gaussian mixture model assumes that the nutrient content values arise from a mixture of two or more Gaussian distributions. Each Gaussian distribution represents a class of food items. Since Gaussian distributions can be described by the mean and variance, the means and variances for each class of food items can be estimated.

The means and variances for each class of food items can be estimated via an iterative process called the Expectation–Maximization (EM) algorithm (15). Since we do not know the means and variances for each class of food items beforehand, we begin with an initial guess for each and iterate between an expectation step (E-step) and a maximization step (M-step). In the E-step, we calculate the probability that a food item belongs to a specific class. In the M-step, we update the mean and variances for each class, based on the probabilities calculated in the expectation step. The steps are repeated until there are no significant changes in either the means and variances or the log-likelihood (how well the model fits the data). The mathematical definitions of the univariate GMM follow.

Suppose that x i j is the amount of nutrient j for food item i ( i = 1 , 2 , , 971 ; j = 1 , 2 , , 28 ) . We assume that the nutrient value x i j arises from a mixture composed of k unobserved classes. Formally, x i j is a sum of class-specific nutrient distributions as

p x i j = k = 1 K p x i j | z i j = k p z i j = k
= k = 1 K π k p k x i j

where K is the number of classes, z i j = 1 , 2 , , k , , K indicates the class for x i j , p k x i j θ k is the probability distribution for class k with parameter vector θ k and π k is the proportion of food items that belong to class k such that

0 π k 1

and

k = 1 K π k = 1

Assuming p k x i j = N μ k σ k 2 , then p k x i j follows a Gaussian distribution and p x i j becomes a Gaussian mixture distribution. Thus, for the univariate GMM

z i j ~ Cat π
x i j | z i j = k ~ N μ k σ k 2

where π is the vector of proportions, μ k is the mean nutrient content for class k and σ k is the associated standard deviation for class k .

The EM algorithm can be utilized when we need to conduct a maximum likelihood estimation of parameters in the presence of missing data or latent variables. The E- and M-steps for the univariate GMM are outlined below.

2.2.2. The E-step

Calculate the responsibilities γ i z (posterior probabilities) for the ith food item and zth class:

γ i z = π z 1 σ z 2 π exp 1 2 σ z 2 x i μ z 2 k = 1 K π k 1 σ k 2 π exp 1 2 σ k 2 x i μ k 2

2.2.3. The M-step

Calculate the new parameters μ z , σ z , and π z via maximization using

μ z = i = 1 N γ i z x i i = 1 N γ i z
σ z = 1 i = 1 N γ i z i = 1 N γ i z x i μ z 2
π z = i = 1 N γ i z N

The EM algorithm begins with initialization and is iterated until convergence of the parameters or log-likelihood is reached (16).

2.2.4. Statistical analysis

After examining the distributions for each nutrient, we aimed to fit a univariate GMM for each natural log-transformed nutrient. ‘Moisture’ was kept on the original scale. We used the ‘mclust’ (17) and ‘mixtools’ (18) R packages to fit the models. The steps followed are outlined below. For each of the 28 nutrients:

1. We determined the optimal number of classes to fit using quantiles to initialize the EM algorithm. Ten GMMs were fitted in succession for k (the number of classes) ranging from 1 to 10 and the Bayesian Information Criterion (BIC) (19) was computed for each model. The k that minimized the BIC was selected as the optimal number of classes.

2. We used the EM algorithm with random initialisation to fit the GMM with the optimal k. To avoid local optima, the model was fitted 10 times and the model with the highest log-likelihood was selected. Convergence was declared when the change in the observed log-likelihood increased by less than 10 8 .

3. The parameter estimates for the mean ( μ ), standard deviation ( σ ) and proportion ( π ) from the selected model were recorded and the GMM density function was plotted.

4. Food items were assigned to classes based on their highest estimated probability of class membership. The class validity of the GMM solutions was assessed using the Davies-Bouldin (DB) (20) index and silhouette coefficient (21).

The DB index measures the average separation between each class and its next nearest class. The index is bounded between zero and infinity with values closer to zero indicating a better partitioning. The silhouette coefficient measures how similar an observation is to observations in its own class (compactness) compared to observations in other classes (separation). The silhouette coefficient is bounded between −1 and 1, where negative values indicate incorrect classifications, values close to 1 indicate highly dense classifications and scores around zero indicate overlapping classifications (observations lying between two classes). Scores greater than 0.5 are generally desirable for good classifications (22).

3. Results

3.1. Model selection

The BIC was compared for the 1- to 10-class GMMs. The most frequent model selected was the two-class model (n = 14/28) followed by the four-class model (n = 6/28). The highest number of classes was found when food items were grouped based on sodium content and niacin content with five and seven classes, respectively. Plant protein, calcium and vitamin B6 were best described by a single class, that is, the univariate normal model.

3.2. Identified classes

The parameter estimates corresponding to the classes are presented in Table 2. Figures 13 depict each nutrient-based classification, which can be described as a mixture of Gaussian distributions. Hence, each Gaussian distribution on the plots represents a class.

TABLE 2
www.frontiersin.org

Table 2. Parameter estimates for the univariate Gaussian mixture model§.

FIGURE 1
www.frontiersin.org

Figure 1. Univariate Gaussian mixture model for macronutrients.

FIGURE 2
www.frontiersin.org

Figure 2. Univariate Gaussian mixture model for minerals.

FIGURE 3
www.frontiersin.org

Figure 3. Univariate Gaussian mixture model for vitamins.

Five classes of food items were identified when classifying food items by sodium content and the mean sodium content of the classes ranged from 1.57 mg to 706.27 mg per 100 g (Table 2). Food items identified as having the highest sodium content were bread, potato crisps, breakfast cereals, canned vegetables, dehydrated potato mash, milk powders, processed meat, canned/cured/smoked fish, butter, margarine, mayonnaise and packaged soup mix (Table 3). Grouping foods by their available carbohydrate content resulted in four identified classes (Table 2). Class 4 contained foods with the highest mean available carbohydrate content of 59.15 g per 100 g and consisted of baked goods, starchy vegetables, and sugar and sweets (Table 4). Food items grouped by their fatty acid content were found to consist of two classes for each of the fatty acids, suggesting that food items could naturally be grouped into having either a low or a high fatty acid content. Food items associated with having a high fatty acid content were baked goods, fried foods, nuts and seeds, dairy products, eggs, meat products, caviar, high-fat fish and fats and oils (Table 5). Three classes of food items were identified when the grouping was based on iron content. Class 2 had the highest mean iron level of 1.46 mg per 100 g and contained mainly wheat products, dehydrated raw vegetables, green vegetables, beetroot, mushroom, dried fruit, legumes, nuts and seeds, milk powder with added iron, eggs, meat (excluding white meat chicken and veal) and certain seafood (Table 6).

TABLE 3
www.frontiersin.org

Table 3. Food items within the identified sodium classes.

TABLE 4
www.frontiersin.org

Table 4. Food items within the identified available carbohydrate classes.

TABLE 5
www.frontiersin.org

Table 5. Food items within the identified fatty acid classes.

TABLE 6
www.frontiersin.org

Table 6. Food items within the identified iron classes.

The study found that the classification of food items using moisture (Supplementary Table 1), animal protein (Table 7) and sodium (Table 3) content could be described by low, moderately-low, moderately-high and high nutrient content classes. Based on the saturated, mono-unsaturated and polyunsaturated fatty acid content, food items could be described by low- and high-content classes (Table 5). When examining their available carbohydrate content, food items could be described as having an extremely low, low, moderate and high available carbohydrate content (Table 4). Low, moderate and high nutrient content classes of food items were also identified based on vitamin A (RE) and thiamin content (Supplementary Table 3). While most food items exhibited a clear belonging to classes, a few food items exhibited multiclass membership. For example, for vitamin A (RE) content, raw leaves other than amaranth had an approximately equal probability of belonging to either the moderate content or high content class while amaranth leaves had a clear belonging to the high content class. Other classes of interest are shown in Supplementary Tables 2–5. Food items with a high copper content were identified by class 2 and consisted of wheat flour, maize meal, leafy greens, mushrooms, potatoes, beans, lentils, nuts and seeds, organ meat, shellfish and chocolate (Supplementary Table 2). The distributions for cholesterol and manganese did not display classes that could be intuitively ranked (Supplementary Table 6).

TABLE 7
www.frontiersin.org

Table 7. Food items within the identified animal protein classes.

Classes capturing foods exhibiting extreme values of nutrients were also identified. These classes contained both foods having low or extremely low nutrient content and foods having a high or extremely high nutrient content. This class was present in the distributions for magnesium, potassium, sodium, copper, riboflavin and pantothenic acid. The distribution of phosphorous also contained two classes with class 1 describing foods with extremely low phosphorous content such as marrow squash, tomato juice, butter ghee, margarine, tea and baking powder.

3.3. Class validity

The internal class validity indices are presented in Figure 4. Nutrient-based classifications with good DB indices and silhouette coefficients are indicated by green shading. The median DB index was 0.78 (IQR 0.45–4.08), suggesting that the GMM resulted in good classification. The minimum score was 0.3 for the vitamin E classifications and the highest scores, ranging from 4.65 to 9.7, were found for the potassium, sodium, zinc, copper and vitamin B12 classifications. An outlying score of 151.06 was found for the classification by pantothenic acid. Each of the classifications that were found to have a high DB score, contained a class that simultaneously captured foods with extremely high nutrient levels and foods with extremely low nutrient levels. For example, class 2 of the copper classification accounted for 56% of the food items and contained foods with both extremely low and extremely high levels of copper. Thus, classifications that contained such a class, tended to have the most overlap of classes and were congruent with having high DB scores.

FIGURE 4
www.frontiersin.org

Figure 4. Internal class validity indices for the univariate GMM classifications. Key: green = good score, yellow = moderate score, red = poor score.

The median silhouette coefficient was 0.5 (IQR 0.39–0.62), also suggesting that the GMM resulted in good classification. Negative silhouette coefficients were found for the zinc and manganese classifications, both of which had a significant overlap of classes. When examining the coefficients for each class, both the zinc and manganese classifications had some classes with high coefficients, suggesting that observations within these classes displayed good cohesion. Again, individual class coefficients were low for classes that captured both extremely high and extremely low values. For example, the first class of cholesterol accounted for 65% of the food items and described foods with either an extremely low cholesterol value or an extremely high cholesterol value. This class had a silhouette coefficient of −0.12 compared with the second cholesterol class which scored 0.81. This similar pattern was also seen for the potassium, sodium, zinc, copper, manganese, riboflavin, niacin and vitamin B12 classifications. Classes that had a significant overlap with other classes tended to have a negative silhouette coefficient.

4. Discussion

In this paper, we have applied Gaussian mixture models to the South African Food Composition Database to evaluate the application of probabilistic classification to food composition data. The classification of food items into nutritionally similar food groups is a common objective of studies that apply statistical methods for the analysis food composition data. Traditional food groupings are not enough to describe the nutritional landscape of food and compositionally similar food groups also need to be investigated. Identifying compositionally similar food groups can be achieved through clustering algorithms which are simple to employ. However, most of the clustering algorithms applied thus far assign food items exclusively to one class and the indistinct thresholds that may exist between food groups, based on nutritional content, needs to be considered. The application of probabilistic clustering can account for this uncertainty.

An important application of FCDBs is its role in the design of therapeutic diets (23). Renal disease, diabetes mellitus and anaemia are some examples of health conditions that require the monitoring of specific nutrients. Allowed food lists and food exchange lists are a useful tool for health practitioners and patients when managing such conditions. They are also useful for healthy individuals to improve their nutrition education (24). Applying clustering methods to food composition data provides a data-driven method of establishing foods with similar nutritional content, for the development of allowed food lists.

Classifications based on cholesterol, total fibre, magnesium, potassium, copper and pantothenic acid content, indicated a clear overlap of two classes, supporting the use of probabilistic classification methods. The differing class variances also suggest that the k-means clustering algorithm may be less suitable when applied to food items since the k-means algorithm separates items into groups of equal variance.

The classes obtained from the GMMs provided greater detail when compared to the groupings identified in a previous study that applied principal component analysis to the SAFCDB to identify compositionally similar food items (7). While the PCA groupings identified the ‘meat and meat products’ food category as a whole being high in animal protein, the identified GMM classes based on animal protein was able to further separate this food category into three subclasses. Specific food items, such as red meat and oily/fatty fish were identified to be high in animal protein. Similarly, while the PCA groupings identified leaves such as lambs quarters and sow thistle leaves as containing a high vitamin A content, our analysis has shown that only amaranth leaves exhibit a higher than average vitamin A content. Thus, within broad food categories, our classification provides detailed subcategories with a focus on the individual food items. In addition, regarding the vitamin A content of leaves other than amaranth leaves, other leaves had an approximately equal probability of belonging to either the moderate content class or the high content class. This finding emphasizes the uncertain thresholds between clusters in food composition data and is possible to quantify through evaluating the class membership probabilities, available with probabilistic classification and is an advantage over PCA.

Although there was a discernible link between the identified classes and the SAFCDB food groups, the identified classes included food items from various SAFCDB food groups. This suggests that compositional similarity cannot be completely described by traditional food groups such as grains, vegetables and dairy, which was a similar finding in other studies (2527). This also supports the nutritional practice of disease specific food exchange lists in diet therapy, such as renal exchange lists, that are informed by the nutrients of concern. Individuals with kidney disease are advised to follow the renal diet (8) which limits particular nutrients, such as protein, sodium, phosphate and potassium. Our analysis classified food items such as rice, pasta, marrow and peach and pear nectars as low potassium foods. Food items such as potatoes, dried raw vegetables, some nuts, milk powder, fish biltong and molasses were found to have a high potassium content. This is consistent with the recommended list of foods to consume and avoid when controlling potassium intake according to the renal diet (28).

Limiting sodium is also necessary for both kidney disease and hypertension (29). Foods identified as having the highest sodium content were bread, potato crisps, canned vegetables, processed meat and instant soups which is consistent with the recommended foods to avoid (30). Foods with the lowest sodium content were mostly fruit and vegetables with some fruit and vegetables containing less sodium than others, an aspect which was easily identifiable from our results and consistent with the recommendations of the DASH diet (31). Since this is data from before the current salt regulations (32) were implemented, future work could explore the impact of the salt regulations on the sodium content of foods using an updated version of the SAFCDB.

Carbohydrate content is also often monitored as part of a healthy diet to control type 2 diabetes and metabolic syndrome (33). Foods identified in the high available carbohydrate class, such as baked goods, starchy vegetables and sweets, are often considered as a source of low-quality carbohydrates (34, 35) and individuals can use this ranking as a guide on foods to monitor when following a low-carbohydrate diet. The foods found in our carbohydrate classes align with the classification of foods by GI (36). Low GI foods such as non-starchy vegetables, fruit and protein-rich foods were grouped together as foods with a low carbohydrate content. In addition, milling was a common processing method in the high available carbohydrate content group and this is known to increase the glycaemic index (GI) of certain foods (finer food particles increase absorption contributing to a higher GI) (29). Using our results, similar food lists can be developed for anaemia and hemochromatosis (requires the control of iron intake), Wilson’s disease (requires the control of copper intake), coronary heart disease (requires the control of fatty acid and dietary cholesterol intake), and gut health (impacted by total fibre intake). Using GMM to classify food items for the development of food lists provides objective rankings of food items while also accounting for the structure of food composition data. Since GMM is a data-driven method, the process of ranking food items using this method reduces the need for manual categorization and food groups can easily be reassessed with the addition of more or updated data.

Food composition data has similar methodological challenges to that of food consumption data such as right-skewness and a large proportion of food items having zero content of a particular nutrient (37). Using a log-transform before applying the GMM adjusted for the skewness and enabled the patterns of each nutrient distribution to become discernible. This also revealed that the distribution of nutrients could be modeled as mixture of Gaussians and foods with a zero nutrient content could be easily excluded from the univariate analysis. This is a desirable property since we are only interested in classifying foods known to have a particular nutrient. The separation of zero nutrient content foods from foods known to have the nutrient was also advocated for by Khan (4). In addition, classes capturing food items with either an extremely low nutrient content or an extremely high nutrient content were also identified. This facilitates outlier detection which could represent foods with an actual extreme nutrient content, foods with added components such as added sugar or added salt, or foods with erroneous values for a specific nutrient. Using extreme values to identify errors was also previously investigated (38).

Overall, the class validity indices indicated that application of the GMM resulted in good classification. Classes with a substantial overlap between them were shown to have poorer internal validity scores than classes that were more separable. Since internal indices focus on separability as one of the criteria for class validity, these indices are unsuitable when the data displays mixed class membership. Further research is needed on appropriate internal class validity indices in the presence of overlapping classes obtained through GMM clustering and on the stability of the identified classes.

The univariate GMM provided useful results but multiple nutrients are present in food items and thus multiple nutrients are consumed simultaneously. While it is important to know which foods may have a relatively low or high nutrient content, consuming a food high in particular nutrient may also unknowingly increase the intake of other nutrients. Thus, it is important to consider the multivariate GMM as future work. However, this can be challenging in the case of high-dimensional data such as food composition data. GMMs often fit extra classes to capture the outliers and can result in poor data fit. Future work could investigate the mixture of multivariate t-distributions (39) to account for the long tails and outliers seen in our data and incorporating the structural zeroes into the clustering algorithm using a zero-inflation model could also be explored (40). Alternatively, Lo and Gottardo (41) proposed a multivariate t-distribution with Box-Cox transformation that could simultaneously address data transformation and outlier detection which are characteristics pertinent to the analysis food composition data.

In conclusion, this study has explored the application of univariate Gaussian mixture models to examine the classification of food items within the South African Food Composition Database. The identified classes exhibited overlap, supporting the use of probabilistic classification methods to account for the uncertainty of nutrient thresholds between classes. Classifying food items by moisture, animal protein, fatty acid, available carbohydrate, total fibre, sodium, vitamin A, thiamin and riboflavin content produced classes with differing means and estimates of variability and could be clearly ranked on a low to high nutrient content scale. Our results highlight that classifications within the broader, traditional food groups exist and our method focuses on identifying the individual food items within these subclasses. The results can be used to inform the development of nutrient profiling indices, allowed food lists and food-based dietary guidelines. The identified classes could also be incorporated into food composition databases to provide an additional level of classification and understanding of food items, thus promoting nutrition education for the user. Since we included processed and manufactured food items in our analysis, manufacturers can use these findings to inform product formulation as well.

Data availability statement

The original contributions presented in the study are included in the article/Supplementary material, further inquiries can be directed to the corresponding author.

Author contributions

YB and SM contributed to the conception and design of the study. AG provided access to the database. YB performed the statistical analysis and wrote the first draft of the manuscript. SM, HM, and AG provided supervision. All authors contributed to manuscript revision and approved the submitted version.

Funding

YB and AG time on this research was funded by the South African Medical Research Council.

Conflict of interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Supplementary material

The Supplementary material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fnut.2023.1186221/full#supplementary-material

References

1. Jacobs, DR Jr, and Steffen, LM. Nutrients, foods, and dietary patterns as exposures in research: a framework for food synergy. Am J Clin Nutr. (2003) 78:508s–13s. doi: 10.1093/ajcn/78.3.508S

CrossRef Full Text | Google Scholar

2. Tapsell, LC, Neale, EP, and Probst, Y. Dietary patterns and cardiovascular disease: insights and challenges for considering food groups and nutrient sources. Curr Atheroscler Rep. (2019) 21:9. doi: 10.1007/s11883-019-0770-1

PubMed Abstract | CrossRef Full Text | Google Scholar

3. Sandström, B. A framework for food-based dietary guidelines in the European Union. Public Health Nutr. (2001) 4:293–305. doi: 10.1017/s1368980001001550

PubMed Abstract | CrossRef Full Text | Google Scholar

4. Khan, AS. Processes in ranking nutrients of foods in a food data base. Nutr Health. (1996) 11:59–72. doi: 10.1177/026010609601100105

CrossRef Full Text | Google Scholar

5. Nikitina, MA, Chernukha, IM, Uzakov, YM, and Nurmukhanbetova, DE. Cluster analysis for databases typologization characteristics. News Natl Acad Sci Repub Kaz Ser Geol Tech Sci. (2021) 2:114–21. doi: 10.32014/2021.2518-170X.42

CrossRef Full Text | Google Scholar

6. Balakrishna, Y, Manda, S, Mwambi, H, and van Graan, A. Statistical methods for the analysis of food composition databases: a review. Nutrients. (2022) 14:2193. doi: 10.3390/nu14112193

PubMed Abstract | CrossRef Full Text | Google Scholar

7. Balakrishna, Y, Manda, S, Mwambi, H, and van Graan, A. Identifying nutrient patterns in south African foods to support national nutrition guidelines and policies. Nutrients. (2021) 13:3194. doi: 10.3390/nu13093194

PubMed Abstract | CrossRef Full Text | Google Scholar

8. Hershey, K. Renal diet. Nurs Clin N Am. (2018) 53:481–9. doi: 10.1016/j.cnur.2018.05.005

CrossRef Full Text | Google Scholar

9. Meng, Y, Bai, H, Wang, S, Li, Z, Wang, Q, and Chen, L. Efficacy of low carbohydrate diet for type 2 diabetes mellitus management: a systematic review and meta-analysis of randomized controlled trials. Diabetes Res Clin Pract. (2017) 131:124–31. doi: 10.1016/j.diabres.2017.07.006

PubMed Abstract | CrossRef Full Text | Google Scholar

10. Fahey, MT, Ferrari, P, Slimani, N, Vermunt, JK, White, IR, Hoffmann, K, et al. Identifying dietary patterns using a normal mixture model: application to the epic study. J Epidemiol Community Health. (2012) 66:89–94. doi: 10.1136/jech.2009.103408

PubMed Abstract | CrossRef Full Text | Google Scholar

11. Fahey, MT, Thane, CW, Bramwell, GD, and Coward, WA. Conditional Gaussian mixture modelling for dietary pattern analysis. J R Stat Soc A Stat Soc. (2007) 170:149–66. doi: 10.1111/j.1467-985X.2006.00452.x

CrossRef Full Text | Google Scholar

12. Windham, CT, Windham, MP, Wyse, BW, and Hansen, RG. Cluster-analysis to improve food classification within commodity groups. J Am Diet Assoc. (1985) 85:1306–14. doi: 10.1016/S0002-8223(21)03795-0

PubMed Abstract | CrossRef Full Text | Google Scholar

13. Luke, JN, Schmidt, DF, Ritte, R, O'Dea, K, Brown, A, Piers, LS, et al. Nutritional predictors of chronic disease in a central Australian aboriginal cohort: a multi-mixture modelling analysis. Nutr Metab Cardiovasc Dis. (2016) 26:162–8. doi: 10.1016/j.numecd.2015.11.009

CrossRef Full Text | Google Scholar

14. Greenfield, H, and Southgate, DAT. Food composition data. Production management and use. 2nd ed. Rome, Italy: Food and Agriculture Organization of the United Nations (2003).

Google Scholar

15. Dempster, AP, Laird, NM, and Rubin, DB. Maximum likelihood from incomplete data via the Em algorithm. J R Stat Soc B. (1977) 39:1–22. doi: 10.1111/j.2517-6161.1977.tb01600.x

CrossRef Full Text | Google Scholar

16. Abbi, R, El-Darzi, E, Vasilakis, C, and Millard, P, editors. Analysis of stopping criteria for the Em algorithm in the context of patient grouping according to length of stay. Vol. 3. Proceedings of the 4th International IEEE Conference on Intelligent Systems IS'08. Varna, Bulgaria (2008), 9–14.

Google Scholar

17. Scrucca, L, Fop, M, Murphy, TB, and Raftery, AE. Mclust 5: clustering, classification and density estimation using Gaussian finite mixture models. The {R}Journal. (2016) 8:289–317. doi: 10.32614/RJ-2016-021

CrossRef Full Text | Google Scholar

18. Benaglia, T, Chauveau, D, Hunter, DR, and Young, D. Mixtools: an R package for analyzing finite mixture models. J Stat Softw. (2009) 32:1–29. doi: 10.18637/jss.v032.i06

CrossRef Full Text | Google Scholar

19. Schwarz, G. Estimating the dimension of a model. Ann Stat. (1978) 6:461–4. doi: 10.1214/aos/1176344136

CrossRef Full Text | Google Scholar

20. Davies, DL, and Bouldin, DW. A cluster separation measure. IEEE Trans Pattern Anal Mach Intell. (1979) PAMI-1:224–7. doi: 10.1109/TPAMI.1979.4766909

CrossRef Full Text | Google Scholar

21. Rousseeuw, PJ. Silhouettes: a graphical aid to the interpretation and validation of cluster analysis. J Comput Appl Math. (1987) 20:53–65. doi: 10.1016/0377-0427(87)90125-7

CrossRef Full Text | Google Scholar

22. Saranya, S, Poonguzhali, S, and Karunakaran, S. Gaussian mixture model based clustering of manual muscle testing grades using surface electromyogram signals. Phys Eng Sci Med. (2020) 43:837–47. doi: 10.1007/s13246-020-00880-5

PubMed Abstract | CrossRef Full Text | Google Scholar

23. Elmadfa, I, and Meyer, AL. Importance of food composition data to nutrition and public health. Eur J Clin Nutr. (2010) 64:S4–7. doi: 10.1038/ejcn.2010.202

CrossRef Full Text | Google Scholar

24. Russolillo-Femenías, G, Menal-Puey, S, Martínez, JA, and Marques-Lopes, I. A practical approach to the management of micronutrients and other nutrients of concern in food exchange lists for meal planning. J Acad Nutr Diet. (2018) 118:2029–41. doi: 10.1016/j.jand.2017.07.020

PubMed Abstract | CrossRef Full Text | Google Scholar

25. Atsaam, DD, Oyelere, S, Balogun, OS, Wario, R, and Blamah, NV. K-means cluster analysis of the west African species of cereals based on nutritional value composition. African J Food Agric Nutr. (2021) 21:17195–212. doi: 10.18697/ajfand.96.19775

CrossRef Full Text | Google Scholar

26. SBR, DP, Giuntini, EB, Grande, F, and de Menezes, EW. Techniques to evaluate changes in the nutritional profile of food products. J Food Compost Anal. (2016) 53:1–6. doi: 10.1016/j.jfca.2016.08.007

CrossRef Full Text | Google Scholar

27. Phanich, M, Pholkul, P, and Phimoltares, S, eds. Food recommendation system using clustering analysis for diabetic patients. 2010 international conference on information science and applications; 21–23 April 2010 (2010).

Google Scholar

28. National Kidney Foundation. Potassium and your Ckd diet [11 September 2023]. Available from: https://www.kidney.org/atoz/content/potassium

Google Scholar

29. Grillo, A, Salvi, L, Coruzzi, P, Salvi, P, and Parati, G. Sodium intake and hypertension. Nutrients. (2019) 11:1970. doi: 10.3390/nu11091970

CrossRef Full Text | Google Scholar

30. National Kidney Foundation. Sodium and your Ckd diet; how to spice up your cooking (2023). Available from: https://www.kidney.org/atoz/content/sodiumckd

Google Scholar

31. National Heart Lung and Blood Institute. Dash eating plan: U.S. Department of Health and Human Services (2023). Available from: https://www.nhlbi.nih.gov/education/dash-eating-plan

Google Scholar

32. South African Government. Government gazette: No. R. 214 foodstuffs, cosmetics and disinfectants act, 1972 (act 54 of 1972) regulations relating to the reduction of sodium in certain foodstuffs and related matters. (2013).

Google Scholar

33. Via, MA, and Mechanick, JI. Nutrition in type 2 diabetes and the metabolic syndrome. Med Clin N Am. (2016) 100:1285–302. doi: 10.1016/j.mcna.2016.06.009

CrossRef Full Text | Google Scholar

34. Drewnowski, A, Maillot, M, Papanikolaou, Y, Jones, JM, Rodriguez, J, Slavin, J, et al. A new carbohydrate food quality scoring system to reflect dietary guidelines: an expert panel report. Nutrients. (2022) 14:1485. doi: 10.3390/nu14071485

PubMed Abstract | CrossRef Full Text | Google Scholar

35. Hou, W, Gao, J, Jiang, W, Wei, W, Wu, H, Zhang, Y, et al. Meal timing of subtypes of macronutrients consumption with cardiovascular diseases: Nhanes, 2003 to 2016. J Clin Endocrinol Metabol. (2021) 106:e2480–90. doi: 10.1210/clinem/dgab288

PubMed Abstract | CrossRef Full Text | Google Scholar

36. Diabetes Canada. Glycemic index food guide – diabetes Canada (2023). Available at: https://guidelines.diabetes.ca/docs/patient-resources/glycemic-index-food-guide.pdf

Google Scholar

37. Carriquiry, AL. Understanding and assessing nutrition. Annu Rev Stat Appl. (2017) 4:123–46. doi: 10.1146/annurev-statistics-041715-033615

CrossRef Full Text | Google Scholar

38. Chu, C-M, Lee, M-S, Hsu, Y-H, Yu, H-L, Wu, T-Y, Chang, S-C, et al. Quality assurance with an informatics auditing process for food composition tables. J Food Compost Anal. (2009) 22:718–27. doi: 10.1016/j.jfca.2009.03.005

CrossRef Full Text | Google Scholar

39. Peel, D, and McLachlan, GJ. Robust mixture modelling using the T distribution. Stat Comput. (2000) 10:339–48. doi: 10.1023/A:1008981510081

CrossRef Full Text | Google Scholar

40. Thanataveerat, A. Clustering algorithm for zero-inflated data. New York, NY: Columbia University (2020).

Google Scholar

41. Lo, K, and Gottardo, R. Flexible mixture modeling via the multivariate t distribution with the box-cox transformation: an alternative to the skew-t distribution. Stat Comput. (2012) 22:33–52. doi: 10.1007/s11222-010-9204-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Keywords: food composition database, nutrient table, mixture model, clustering, classification, nutritional content

Citation: Balakrishna Y, Manda S, Mwambi H and van Graan A (2023) Determining classes of food items for health requirements and nutrition guidelines using Gaussian mixture models. Front. Nutr. 10:1186221. doi: 10.3389/fnut.2023.1186221

Received: 14 March 2023; Accepted: 28 September 2023;
Published: 13 October 2023.

Edited by:

Alessandra Durazzo, Council for Agricultural Research and Economics, Italy

Reviewed by:

M. Graça Dias, Instituto Nacional de Saúde Doutor Ricardo Jorge (INSA), Portugal
Kathleen L. Hefferon, Cornell University, United States
Yan Bai, World Bank Group, United States
Christian Napoli, Sapienza University of Rome, Italy

Copyright © 2023 Balakrishna, Manda, Mwambi and van Graan. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Yusentha Balakrishna, eXVzZW50aGEuYmFsYWtyaXNobmFAbXJjLmFjLnph

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.