%A Szili,Endre J. %A Dedrick,James %A Oh,Jun-Seok %A Bradley,James W. %A Boswell,Roderick W. %A Charles,Christine %A Short,Robert D. %A Al-Bataineh,Sameer A. %D 2017 %J Frontiers in Physics %C %F %G English %K Microplasma array,Reactive Oxygen Species,Reactive Nitrogen Species,Microarray,Biomaterials,surface patterning,Polystyrene %Q %R 10.3389/fphy.2017.00001 %W %L %M %P %7 %8 2017-February-03 %9 Original Research %+ Endre J. Szili,Future Industries Institute, University of South Australia,Adelaide, SA, Australia,endre.szili@unisa.edu.au %+ Sameer A. Al-Bataineh,Future Industries Institute, University of South Australia,Adelaide, SA, Australia,sameer.al-bataineh@unisa.edu.au %# %! Microplasma array patterning reactive oxygen and nitrogen species %* %< %T Microplasma Array Patterning of Reactive Oxygen and Nitrogen Species onto Polystyrene %U https://www.frontiersin.org/articles/10.3389/fphy.2017.00001 %V 5 %0 JOURNAL ARTICLE %@ 2296-424X %X We investigate an approach for the patterning of reactive oxygen and nitrogen species (RONS) onto polystyrene using atmospheric-pressure microplasma arrays. The spectrally integrated and time-resolved optical emission from the array is characterized with respect to the applied voltage, applied-voltage frequency and pressure; and the array is used to achieve spatially resolved modification of polystyrene at three pressures: 500, 760, and 1000 Torr. As determined by time-of-flight secondary ion mass spectrometry (ToF-SIMS), regions over which surface modification occurs are clearly restricted to areas that are exposed to individual microplasma cavities. Analysis of the negative-ion ToF-SIMS mass spectra from the center of the modified microspots shows that the level of oxidation is dependent on the operating pressure, and closely correlated with the spatial distribution of the optical emission. The functional groups that are generated by the microplasma array on the polystyrene surface are shown to readily participate in an oxidative reaction in phosphate buffered saline solution (pH 7.4). Patterns of oxidized and chemically reactive functionalities could potentially be applied to the future development of biomaterial surfaces, where spatial control over biomolecule or cell function is needed.