Your new experience awaits. Try the new design now and help us make it even better

CORRECTION article

Front. Earth Sci., 14 October 2025

Sec. Geohazards and Georisks

Volume 13 - 2025 | https://doi.org/10.3389/feart.2025.1712138

Correction: Research on historical deformation and rock layer water content variation in large open-pit mining areas based on SBAS and MatDEM

Jiabo Geng,Jiabo Geng1,2Cunyang Liu,,Cunyang Liu1,2,3Xiang LanXiang Lan2Yunmin WangYunmin Wang1Xing WangXing Wang1Xiaobing Wang
Xiaobing Wang1*
  • 1Sinosteel Maanshan General Institute of Mining Research Co. Ltd., Maanshan, China
  • 2School of Emergency Management and Safety Engineering, Jiangxi University of Science and Technology, Ganzhou, China
  • 3State Key Laboratory of Safety and Health for Metal Mine, Maanshan, China

A Correction on
Research on historical deformation and rock layer water content variation in large open-pit mining areas based on SBAS and MatDEM

by Geng J, Liu C, Lan X, Wang Y, Wang X and Wang X (2025). Front. Earth Sci. 13: 1618116. doi: 10.3389/feart.2025.1618116

Affiliation “State Key Laboratory of Safety and Health for Metal Mine, Maanshan, China” was omitted for author Cunyang Liu. This affiliation has now been added for author Cunyang Liu.

The Author Contributions statement was erroneously given as “JG: Funding acquisition, Methodology, Resources, Writing – original draft, Writing – review and editing. CL: Data curation, Formal Analysis, Software, Writing – original draft. XL: Formal Analysis, Software, Validation, Writing – original draft. YW: Methodology, Resources, Supervision, Writing – review and editing. XnW: Conceptualization, Validation, Writing – review and editing. XaW: Conceptualization, Methodology, Writing – review and editing.” The correct statement is “JG: Funding acquisition, Methodology, Resources, Writing–original draft, Writing – review and editing. CL: Data curation, Formal Analysis, Software, Writing – original draft. XL: Formal Analysis, Software, Validation, Writing – original draft. YW: Methodology, Resources, Supervision, Writing – review and editing. XnW: Conceptualization, Validation, Writing – review and editing. XaW: Conceptualization, Funding acquisition, Methodology, Writing – review and editing.”

Funder “The Design Theory and Engineering Technology for Intensive Block-Based High-Strength Low-Carbon Mining in Ultra-Large Scale Open-Pit Mines (2023YFC2907301)” to XaW was erroneously omitted.

The original article has been updated

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: SBAS-InSAR, MatDEM, surface settlement, deformation of bed, volumetric water content

Citation: Geng J, Liu C, Lan X, Wang Y, Wang X and Wang X (2025) Correction: Research on historical deformation and rock layer water content variation in large open-pit mining areas based on SBAS and MatDEM. Front. Earth Sci. 13:1712138. doi: 10.3389/feart.2025.1712138

Received: 24 September 2025; Accepted: 29 September 2025;
Published: 14 October 2025.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2025 Geng, Liu, Lan, Wang, Wang and Wang. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Xiaobing Wang, d2FuZ194aWFvYmluZzIwMjRAMTYzLmNvbQ==

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.