Original Research
Published on 30 Jan 2025
Simulations of decane-ammonia autoignition in two mixture fractions
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1498820
- 1,467 views
Type at least 3 characters
157 articles
articles
Original Research
Published on 07 Jan 2025
The risk control of rollover safety for new energy vehicles based on wire controlled chassis system
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1411552
- 1,933 views
- 1 citation
Original Research
Published on 11 Dec 2024
Intelligent vehicle obstacle avoidance strategy application supported by fuzzy control theory
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1434067
- 1,770 views
- 2 citations
Correction
Published on 07 Nov 2024
Corrigendum: The application of virtual synchronous generator technology in inertial control of new energy vehicle power generation
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1512849
- 1,105 views
- 1 citation
Original Research
Published on 22 Aug 2024
Particle swarm optimization based neural network automatic controller for stability steering control of four-wheel drive electric vehicle
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1378175
- 2,270 views
- 2 citations
Original Research
Published on 21 Aug 2024
Effect of by-product fusel oil-diesel blends fuel on emissions of single-cylinder CI engine
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1459374
- 4,027 views
- 1 citation
Original Research
Published on 16 Aug 2024
Design of adaptive cruise control strategy for EREV considering driving behavior
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1408277
- 2,200 views
Correction
Published on 02 Jul 2024
Corrigendum: Meeting future NOx emission regulations by adding an electrically heated mixer
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1441864
- 1,136 views
Original Research
Published on 01 Jul 2024
Optimization of liquid cooled heat dissipation structure for vehicle energy storage batteries based on NSGA-II
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1411456
- 2,758 views
- 1 citation
Original Research
Published on 24 May 2024
Optimal efficiency point membership incorporating fuzzy logic and automatic control of various charging stages for electric vehicles
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1390341
- 2,022 views
- 1 citation
Original Research
Published on 02 May 2024
Greenhouse gas reduction in a medium-duty compression ignition engine with optimization for B20
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1376038
- 8,549 views
- 4 citations
Original Research
Published on 11 Apr 2024
Innovative framework for effective service parts management in the automotive industry
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1361688
- 7,835 views
- 4 citations
Original Research
Published on 10 Apr 2024
The application of virtual synchronous generator technology in inertial control of new energy vehicle power generation
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1382664
- 2,932 views
- 3 citations
Original Research
Published on 11 Mar 2024
Lean ammonia-fueled engine operation enabled by hydrogen-assisted turbulent jet ignition
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1368717
- 5,884 views
- 15 citations
Original Research
Published on 05 Mar 2024
The milling parameters of mechanical parts are optimized by NC machining technology
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1367009
- 5,184 views
- 5 citations
Methods
Published on 18 Jan 2024
Cooling enhancement for engine parts using jet impingement
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2024.1251587
- 7,274 views
- 4 citations
Original Research
Published on 10 Jan 2024
Direct yaw moment control of eight-wheeled distributed drive electric vehicles based on super-twisting sliding mode control
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1347852
- 5,414 views
- 5 citations
Original Research
Published on 15 Nov 2023
Diesel engine waste heat recovery turbine design: geometric and materials effects on ORC turbines
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1291108
- 2,738 views
- 1 citation
Original Research
Published on 02 Nov 2023
Tribological evaluation of electric vehicle driveline lubricants in an electrified environment
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1215352
- 4,244 views
- 17 citations
Original Research
Published on 03 Oct 2023
Analysis of the aerodynamic characteristics of an ejection seat system using computational fluid dynamics
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1255051
- 6,705 views
- 4 citations
Editorial
Published on 24 Jul 2023
Editorial: New developments in vehicle thermal management
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1255446
- 3,095 views
Editorial
Published on 18 Jul 2023
Editorial: New developments in vehicle thermal management
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1255405
- 2,767 views
Original Research
Published on 04 Jul 2023
Effects of key parameters on performance of a pre-cooled core engine based on the closed helium cycle
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1208468
- 4,811 views
Original Research
Published on 03 Jul 2023
Aging of a dielectric fluid used for direct contact immersion cooling of batteries
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2023.1212730
- 11,804 views
- 8 citations