hydro-mechanical coupling are still needed.The permeability of geomaterials is as important as the mechanical characteristics under the hydro-mechanical coupling condition. Specially, for rock masses, the hydro-mechanical behavior and permeability are affected by different factors, including the geometry of the fracture, the interconnection of voids/fractures, the fracture in-filling material, the roughness of the fracture, the fluid pressure, and the confining pressure. To showed that the moisture content increases exponentially with increasing water immersion time and immersion frequency, additionally, with increasing water immersion time and frequency, the moisture distribution within the coal samples changes from uneven to uniform, and micro-pores and meso-pores develop into larger pores with increasing water content. To reveal gas seepage law under complex stress conditions, Yo et al. studied the effects of confining pressure, internal pressure, effective stress and water pressure on gas permeability, which indicated that the effective stress and slippage effect compete with each other when the confining pressure is kept fixed and the internal pressure is increased in the fractured tight sandstone reservoir. The hydro-thermal coupling effect on mechanical and deformation failure behaviors of rock was also investigated in the current topic. Zhao et al investigated the role of gritstone after hydro-thermal treatment on the mechanical properties and deformation failure behavior, which found the mechanical parameters are closely related to the high temperature, high pressure of water and the cooling down methods.To date, many hydro-thermal coupling models have emerged to study the seepage-stress coupling effect in rock masses based on either discrete medium model (Indraratna 1995;Wang 2000;Zhang 2015;Ren et al. 2017) or continuous medium model (Suresh, 2014, Shojaei, et al. 2014Zhang, 2017). Some corresponding numerical simulation include the finite element method (FEM) the extended finite element method (XFEM) , and discrete element method (DEM) .The above methods reveal the mechanism of the seepage in rock fracture. Nevertheless, there are some major disadvantages. One the one hand, although discrete medium models can effectively describe the heterogeneous and anisotropic hydraulic properties of fractures, the models are difficult to determinate geometric parameters of all fractures in rock masses. On the other hand, continuous medium models regard the rock fractures network system as an equivalent continuous medium by some equivalent methods, which is simple and has strong ability of adaptation. However, these continuous models cannot describe the high conductivity behaviors of major fractures in fractured masses. In addition to explaining the seepage effect, another challenge is to account for the damage evolution, which lies in the following two aspects: (1) fluid flow in rock masses results in the change of pore pressure and rock deformation and damage in rock masses; (2) The damage increases the permeability of rock masses, which is a key parameter related with seepage characteristic, and degrades the stiffness of rock masses, which is a key parameter related with mechanical characteristic. Apparently, the above two nonlinear processes are related to the fluid-solid coupling effect and damage evolution, and both can be combined into a seepage-damage coupling. However, little attention has been paid to this complicated seepage-damage coupling effect. For intact rock, many laboratory creep tests have been performed. The experimental results show that the key parameters that affect the creep behavior of rock include deviatoric stress, confining pressure, and environmental conditions. The higher deviatoric stress results in an increase in the creep strain rate. The relation between the steady-state creep strain rate and the deviatoric stress can be expressed using an exponential function. Confining pressure also has an important effect on the creep strain rate; a lower creep strain rate is expected at a higher confining pressure. Environmental conditions (e.g., the presence of water) also affect the creep behavior of intact rock. For rocks containing discontinuous features, the characteristics of the preexisting discontinuous features such as density and orientation can have a strong effect on creep behavior. To the effect of weak interlayer on rock creep behaviors, Tang and Zhao studied the influence law of stress level and weak interlayer inclination angle on the rheological properties of the rock, and observed that the increase of stress, the viscoplastic strain of the intact specimen decreases at low stress levels, and increases at high stress levels, and with the increase of the weak interlayer inclination angle, the instantaneous elastic strain and instantaneous plastic strain will increase.A number of modelling approaches have been proposed to interpret and predict the creep mechanical behaviours of rocks, which focused on the macro creep response of the rocks. However, the mechanism of creep failure in rock masses induced by creep fracture of rock cracks still lacks sufficient investigations. External loads subsequently cause the rock cracks to open, slide, initiate, propagate, and then coalesce, which affect the creep behaviours of rocks. So the essence of the problem in modelling creep is to find a tractable way to link small scale microcrack growth with its macroscopic manifestation, i.e., creep strain and shear fracture. This upscaling problem has been a longstanding issue in rock mechanics, and in particular the process of crack interactions and coalescence to form a macroscopic fault remains enigmatic.We hope that the reader will find this Research Topic collection of papers a useful reference for future research on hydro-mechanical coupling and creep behaviours of geomaterials
6 Authors
- SX
Shijie Xie
School of Resources and Safety Engineering, Central South University, China
- HL
Hang Lin
School of Resources and Safety Engineering, Central South University, China
- YC
Yifan Chen
School of Resources and Safety Engineering, Central South University, China
- YW
Yixian Wang
School of Civil Engineering, Hefei University of Technology, China
- RC
Rihong Cao
School of Resources and Safety Engineering, Central South University, China
- JL
Jiangteng Li
School of Resources and Safety Engineering, Central South University, China
6 Authors
- GD
Gang Deng
State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin, China Institute of Water Resources and Hydropower Research, China
- LZ
Liang-Liang Zhang
Department of Civil and Environmental Engineering, Harbin Institute of Technology, University Town of Shenzhen, China
- RC
Rui Chen
Department of Civil and Environmental Engineering, Harbin Institute of Technology, University Town of Shenzhen, China
- LL
Lei-lei Liu
Department of Civil and Environmental Engineering, Harbin Institute of Technology, University Town of Shenzhen, China
- KS
Kai-Xiang Shu
Department of Civil and Environmental Engineering, Harbin Institute of Technology, University Town of Shenzhen, China
- ZZ
Zhi-Le Zhou
Department of Civil and Environmental Engineering, Harbin Institute of Technology, University Town of Shenzhen, China
5 Authors
- XL
Xueying Liu
Fujian Research Center for Tunneling and Urban Underground Space Engineering, Huaqiao University, China
- JY
Jin Yu
Fujian Research Center for Tunneling and Urban Underground Space Engineering, Huaqiao University, China
- YZ
Yaoliang Zhu
Fujian Research Center for Tunneling and Urban Underground Space Engineering, Huaqiao University, China
- WY
Wei Yao
Fujian Research Center for Tunneling and Urban Underground Space Engineering, Huaqiao University, China
- YL
Yongming Lai
Fujian Research Center for Tunneling and Urban Underground Space Engineering, Huaqiao University, China
3,165 views
16 citations
3 Authors
- ZJ
Zeng Jia-jun
School of Resource Environment and Safety Engineering, University of South China, China
- ZZ
Zhang Zhi-Jun
School of Resource Environment and Safety Engineering, University of South China, China
- PC
Pu Cheng-zhi
School of Resource Environment and Safety Engineering, University of South China, China
2,883 views
3 citations




