Frontiers in Materials | Polymeric and Composite Materials

Original Research

Published on 15 Jun 2023

Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard

in Polymeric and Composite Materials

Waheed Gul
Syed Riaz Akbar Shah
Afzal Khan
Naveed Ahmad
Sheraz Ahmed
Noor Ain
Arshad Mehmood
Bashir Salah
Syed Sajid Ullah
Razaullah Khan

Frontiers in Materials

doi 10.3389/fmats.2023.1206918

14,594 views
42 citations

Original Research

Published on 14 Jun 2023

Effect of shear ratio on rheological properties of suspension in two-step flocculation process for fine iron tailings

in Polymeric and Composite Materials

Ying Yang
Aixiang Wu
Xiancheng Wang
Guoli Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1217947

3,760 views
1 citation

Original Research

Published on 13 Jun 2023

Synthesis of novel Fe3O4 nanostructures surrounded by Ti-MOF nanostructures as bioactive and efficient catalysts in three-component synthesis of new pyrazole derivatives

in Polymeric and Composite Materials

Balsam Qubais Saeed
Ibrahem Waleed
Hussein Humedy Chlib Alkaaby
Sabrean Farhan Jawad
Usama S. Altimari
Ziyad Shihab Ahmed AL-Sarraj
Ruwaida T. Shbeeb
Salema K. Hadrawi
Muath Suliman
Mohammad Y. Alshahrani

Frontiers in Materials

doi 10.3389/fmats.2023.1156702

2,872 views
8 citations

Editorial

Published on 13 Jun 2023

Editorial: Additive manufacturing for polymers

in Polymeric and Composite Materials

Xuan Zhou
Jianlei Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1230323

1,853 views
2 citations

Original Research

Published on 12 Jun 2023

Unified numerical process modeling of forming and consolidation for thermoplastic composites with prepreg patches

in Polymeric and Composite Materials

P. D. Mulye
L. Morançay
C. Binetruy
S. Comas-Cardona
A. Leygue
D. Guillon

Frontiers in Materials

doi 10.3389/fmats.2023.1176482

5,651 views
4 citations

Original Research

Published on 07 Jun 2023

Cement–ash concrete with the addition of lime kiln dust

in Polymeric and Composite Materials

Leonid Dvorkin
Vadim Zhitkovsky

Frontiers in Materials

doi 10.3389/fmats.2023.1196407

4,711 views
6 citations

Review

Published on 02 Jun 2023

The effect of size, morphology and surface properties of mesoporous silica nanoparticles on pharmacokinetic aspects and potential toxicity concerns

in Polymeric and Composite Materials

Uranous Niroumand
Negar Firouzabadi
Ghazal Goshtasbi
Bahareh Hassani
Parisa Ghasemiyeh
Soliman Mohammadi-Samani

Frontiers in Materials

doi 10.3389/fmats.2023.1189463

11,418 views
68 citations

Original Research

Published on 02 Jun 2023

Multiscale analyses of the damage of composite rocket motor cases

in Polymeric and Composite Materials

Zai Liu
Weiwei Hui
Guoqing Chen
Peng Cao

Frontiers in Materials

doi 10.3389/fmats.2023.1198493

4,225 views
5 citations

Original Research

Published on 26 May 2023

Additive manufacturing of metal-polymer hybrid parts: the influence of as-printed LPBF surface roughness on the joint strength

in Polymeric and Composite Materials

C. Belei
P. S. Effertz
B. Meier
S. T. Amancio-Filho

Frontiers in Materials

doi 10.3389/fmats.2023.1202281

7,512 views
8 citations

Editorial

Published on 23 May 2023

Editorial: Polymer composites based on nanofillers: design, properties, and applications

in Polymeric and Composite Materials

Lik-ho Tam
Dong-Joo Lee
Vineet Kumar

Frontiers in Materials

doi 10.3389/fmats.2023.1216973

2,261 views
7 citations

Original Research

Published on 11 May 2023

Thermal performance of thermoplastic polyurethane composites with microencapsulated piperazine pyrophosphate

in Polymeric and Composite Materials

Shuang Hu
Jianwen Peng
Jianjun Tian
Chong Xiao

Frontiers in Materials

doi 10.3389/fmats.2023.1178475

3,410 views
13 citations

Original Research

Published on 11 May 2023

Evaluating the performance of surfactant and charcoal-based cleaning products to effectively remove PAHs from firefighter gear

in Polymeric and Composite Materials

MD Tanjim Hossain
Arjunsing G. Girase
R. Bryan Ormond

Frontiers in Materials

doi 10.3389/fmats.2023.1142777

5,378 views
8 citations

Original Research

Published on 09 May 2023

Impact of moisture content, closing speed, and pressurizing speed on the performance of medium density fiberboard (MDF)

in Polymeric and Composite Materials

Waheed Gul
Naveed Ahmad
Shoaib Mohammad
Bashir Salah
Syed Sajid Ullah
Muhammad Khurram
Razaullah Khan

Frontiers in Materials

doi 10.3389/fmats.2023.1195789

5,746 views
4 citations

Original Research

Published on 09 May 2023

g-C3N4/Fe3O4 composites synthesized via solid-state reaction and photocatalytic activity evaluation of methyl blue degradation under visible light irradiation

in Polymeric and Composite Materials

Asghar Ali
Muhammad Amin
Muhammad Tahir
S. S. Ali
Asif Hussain
Imtiaz Ahmad
Asif Mahmood
M. Umer Farooq
Muhammad Asim Farid

Frontiers in Materials

doi 10.3389/fmats.2023.1180646

7,631 views
19 citations

Original Research

Published on 05 May 2023

Modeling the contact dispensing process of conductive adhesives with different viscosities and optimization of droplet deposition

in Polymeric and Composite Materials

Jiajia Zou
Mengqiu Huang
Dan Zhao
Fang Chen
Daochang Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1183747

4,994 views
3 citations

Original Research

Published on 04 May 2023

Comprehensive computational investigations on various aerospace materials under complicated loading conditions through conventional and advanced analyses: a verified examination

in Polymeric and Composite Materials

Raj Kumar Gnanasekaran
Balasubramanian Shanmugam
Vijayanandh Raja
Hussein A. Z. Al-Bonsrulah
Parvathy Rajendran
Jeeva Radhakrishnan
Sayed M. Eldin
Venkatesh Narayanan

Frontiers in Materials

doi 10.3389/fmats.2023.1147310

5,066 views
6 citations

Original Research

Published on 28 Apr 2023

Strength of Onyx-based composite 3D printing materials according to fiber reinforcement

in Polymeric and Composite Materials

Gyu-Wol Lee
Tae-Hyun Kim
Jong-Hwan Yun
Nam-Joo Kim
Ki-Hwan Ahn
Min-Soo Kang

Frontiers in Materials

doi 10.3389/fmats.2023.1183816

7,654 views
18 citations

Original Research

Published on 27 Apr 2023

A method to produce periodic varied structural composite yarn by forced migrations of convergence point between polymer filaments and the staple strand

in Polymeric and Composite Materials

Ze Chen
Wei Li
Zhiyong Peng
Ruicheng Zhang
Xin Wang
Weilin Xu
Duo Xu
Keshuai Liu

Frontiers in Materials

doi 10.3389/fmats.2023.1171786

3,485 views
1 citation

Original Research

Published on 27 Apr 2023

Numerical simulation of inductive heating in thermoplastic unidirectional cross-ply laminates

in Polymeric and Composite Materials

A. J. de Wit
N. van Hoorn
L. S. Straathof
W. J. Vankan

Frontiers in Materials

doi 10.3389/fmats.2023.1155322

4,351 views
7 citations

Original Research

Published on 26 Apr 2023

A spinning method for low-torsion composite yarn with basalt fibers and staple cotton fibers

in Polymeric and Composite Materials

Wei Li
Zhiyong Peng
Ruicheng Zhang
Xin Wang
Juan Li
Yue Sun
Weilin Xu
Duo Xu
Keshuai Liu

Frontiers in Materials

doi 10.3389/fmats.2023.1170202

4,797 views
5 citations

Original Research

Published on 24 Apr 2023

Female firefighters’ increased risk of occupational exposure due to ill-fitting personal protective clothing

in Polymeric and Composite Materials

Meredith McQuerry
Cassandra Kwon
Madeline Poley-Bogan

Frontiers in Materials

doi 10.3389/fmats.2023.1175559

11,423 views
19 citations

Original Research

Published on 18 Apr 2023

Determination of fiber orientation model parameters for injection molding simulations via automated metamodel optimization

in Polymeric and Composite Materials

Konrad Rienesl
Philipp S. Stelzer
Zoltán Major
Chih-Chung Hsu
Li-Yang Chang
Kepa Zulueta

Frontiers in Materials

doi 10.3389/fmats.2023.1152471

6,429 views
4 citations

Original Research

Published on 06 Apr 2023

Porous single crystalline-like titanium dioxide monolith with enhanced photoelectrochemical performance

in Polymeric and Composite Materials

Kaipeng Liu
Fangyuan Cheng
Yunfei Luo
Ling Liu
Changtao Wang
Kui Xie
Xiangang Luo

Frontiers in Materials

doi 10.3389/fmats.2023.1177093

3,099 views
5 citations

Review

Published on 06 Apr 2023

Biofunctionalization of hydrogel-based scaffolds for vascular tissue regeneration

in Polymeric and Composite Materials

Jorge López-Gutierrez
Rosalío Ramos-Payán
Alfredo Ayala-Ham
José Geovanni Romero-Quintana
Hipolito Castillo-Ureta
Carlos Villegas-Mercado
Mercedes Bermúdez
Guzman Sanchez-Schmitz
Maribel Aguilar-Medina

Frontiers in Materials

doi 10.3389/fmats.2023.1168616

5,214 views
12 citations