Original Research
Accepted on 20 Jan 2026
Surface Roughness and Preload Loss of Implant-Supported Screw Retained Three-Unit Framework Fabricated by Different Techniques
in Biomaterials and Bio-Inspired Materials
Frontiers in Materials
Type at least 3 characters
3,850 articles
articles
Original Research
Published on 20 Jan 2026
Deep learning-based image classification for microstructural analysis in computational materials science
in Computational Materials Science
Frontiers in Materials
doi 10.3389/fmats.2025.1648653
- 823 views
Mini Review
Accepted on 15 Jan 2026
Calcium Fluoride as an Efficient Mineralizer for Low-Temperature Portland Cement Clinkering: A Mechanistic Mini Review
in Ceramics and Glass
Frontiers in Materials
- 128 views
Original Research
Published on 15 Jan 2026
Research on the mechanical properties and microstructure of saline soil subgrade improved by steel slag powder and lime
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1751820
- 287 views
Original Research
Published on 15 Jan 2026
Laboratory test and simulation for anchoring slope of steel tube foam concrete frame beam
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2026.1747622
- 509 views
Original Research
Accepted on 14 Jan 2026
Mechanical Performance and Landslide Stabilization Applications of Precast Small-Diameter Prestressed Concrete Pipe Piles
in Structural Materials
Frontiers in Materials
Original Research
Accepted on 14 Jan 2026
Effect of heat treatment on very-high-cycle fatigue performance of EA4T axle steel
in Structural Materials
Frontiers in Materials
Original Research
Published on 14 Jan 2026
Study on the physical properties, anti-aging properties, and rheological characteristics of graphene oxide/rubber powder composite modified asphalt
in Smart Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1758696
- 327 views
Editorial
Accepted on 13 Jan 2026
Editorial: Recent advances in flame retardant polymeric materials and composites
in Polymeric and Composite Materials
Frontiers in Materials
- 139 views
Original Research
Accepted on 12 Jan 2026
Influence of ECAP passes on Zn–Li–Mn Alloys: Mechanics, Corrosion, and Osteogenesis
in Biomaterials and Bio-Inspired Materials
Frontiers in Materials
Original Research
Accepted on 12 Jan 2026
Experimental Study and Mechanism Analysis on Improving the Workability of Metakaolin‑Based Geopolymers Using Superplasticizer
in Structural Materials
Frontiers in Materials
Review
Published on 12 Jan 2026
Composite materials based on metal-organic frameworks loaded with effective therapeutic components for promoting wound healing
in Biomaterials and Bio-Inspired Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1713264
- 562 views
Original Research
Published on 09 Jan 2026
A strategy for fabricating a multifunctional hydrogel with enhanced adhesion and ROS-scavenging capabilities
in Biomaterials and Bio-Inspired Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1698044
- 676 views
Original Research
Published on 08 Jan 2026
Rapid non-contact detection of aggregate gradation based on stereo vision
in Computational Materials Science
Frontiers in Materials
doi 10.3389/fmats.2025.1745325
- 550 views
Original Research
Published on 08 Jan 2026
Insights into the influence of waste ceramic tiles powder on cement hydration and microstructure from electrochemical impedance spectroscopy
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1747505
- 647 views
Original Research
Published on 08 Jan 2026
Study on the development height of “two zones” under repeated mining of medium-thick coal seams at close range
in Mechanics of Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1704755
- 579 views
Editorial
Published on 07 Jan 2026
Editorial: Advancements in creep-resistant alloys for high-performance applications
in Environmental Degradation of Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1769156
- 695 views
Perspective
Published on 07 Jan 2026
Structural materials in Frontiers in Materials, 10 years on
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1713993
- 1,059 views
Correction
Published on 07 Jan 2026
Correction: Application of modified sodium alginate hydrogel for interventional embolization of hemorrhagic diseases
in Biomaterials and Bio-Inspired Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1756535
- 404 views
Original Research
Published on 07 Jan 2026
Deformation prediction analysis of sandstone coal mine goaf based on discrete element method and probability integration method
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1747266
- 639 views
Review
Published on 07 Jan 2026
Preventing peri-implantitis: strategies, mechanisms, and clinical perspectives for inhibiting biofilm formation on implant surface
in Biomaterials and Bio-Inspired Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1739290
- 848 views
Original Research
Published on 07 Jan 2026
Effects of salt-induced degradation on the moisture stability and high-temperature performance of PPA/BF/SBS composite modified asphalt mixture
in Smart Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1748571
- 617 views
Original Research
Published on 07 Jan 2026
Physics-informed neural network–transformer for dual-objective prediction and mix optimization of backfill materials
in Computational Materials Science
Frontiers in Materials
doi 10.3389/fmats.2025.1737888
- 671 views
Original Research
Published on 07 Jan 2026
The mechanism of synergistic hydration performance improvement of the ternary composite cementitious material composed of hemihydrate phosphogypsum, blast furnace slag and quicklime
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1739893
- 495 views