Editorial
Published on 18 Jun 2024
Editorial: 2022 retrospective: polymeric and composite materials
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1427668
- 682 views
Type at least 3 characters
435 articles
Review
Published on 03 Jun 2024
PHBV cycle of life using waste as a starting point: from production to recyclability
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1405483
- 4,167 views
- 3 citations
Editorial
Published on 30 May 2024
Editorial: Recent advances in functional materials: polymers and composite materials
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1426738
- 1,332 views
Original Research
Published on 21 May 2024
Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1415907
- 3,326 views
- 13 citations
Original Research
Published on 16 May 2024
Efficiency enhancement of non-fullerene organic solar cells using PEDOT:PSS diluted with alcohol solvents as the hole transport layer
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1383816
- 1,911 views
- 1 citation
Original Research
Published on 02 May 2024
Sustainable high-strength alkali-activated slag concrete is achieved by recycling emulsified waste cooking oil
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1388122
- 1,474 views
- 2 citations
Original Research
Published on 01 May 2024
Optimization of preparation techniques for high-temperature resistant waterborne phenolic-epoxy resin emulsion under low carbon background
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1406583
- 1,319 views
Original Research
Published on 19 Apr 2024
Study on characteristics of ammonia alkali white mud and mechanical properties of preparation of fluid solidified soil
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1390421
- 1,372 views
Original Research
Published on 12 Apr 2024
Tribological analysis of titanium alloy (Ti-6Al-4V) hybrid metal matrix composite through the use of Taguchi’s method and machine learning classifiers
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1375200
- 2,018 views
Original Research
Published on 12 Apr 2024
Biomimetic spray coating for fruit preservation based on UiO-1 67 metal–organic framework nanozyme
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1303449
- 1,856 views
- 2 citations
Original Research
Published on 08 Apr 2024
Effect of Mg incorporation on the properties of PCL/Mg composites for potential tissue engineering applications
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1294811
- 1,752 views
- 5 citations
Original Research
Published on 04 Apr 2024
The overlap rate influences the microstructure and properties of laser-cladded Fe-Ni-Ti composite coatings
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1342926
- 1,169 views
- 3 citations
Original Research
Published on 21 Mar 2024
Poly(lactic acid)/ poly(ε-caprolactone) blends: the effect of nanocalcium carbonate and glycidyl methacrylate on interfacial characteristics
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1377340
- 3,774 views
- 2 citations
Original Research
Published on 18 Mar 2024
Utilization of response surface methodology to optimize the mechanical behaviour of flax/nano TiO2/Epoxy based hybrid composites under liquid nitrogen environment
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1344351
- 2,311 views
- 5 citations
Original Research
Published on 14 Mar 2024
Study on microstructural and mechanical properties of cementitious materials composed of fly ash and dacite powder
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1267197
- 2,712 views
- 1 citation
Original Research
Published on 13 Mar 2024
Research on temperature field reconstruction technology for single-dome combustion chambers based on flame image
in Polymeric and Composite Materials
Frontiers in Materials
doi 10.3389/fmats.2024.1339375
- 2,496 views