Original Research
Published on 14 Jan 2021
Dislocation-Controlled Low-Temperature Superplastic Deformation of Ti-6Al-4V Alloy
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.606092
- 3,105 views
- 4 citations
Type at least 3 characters
999 articles
articles
Original Research
Published on 13 Jan 2021
Preparation of 304 Stainless Steel Powder for 3D Printing by Vacuum-Induced Multistage Atomization
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.623864
- 3,803 views
- 4 citations
Original Research
Published on 11 Jan 2021
Experimental Investigation on Failure Behaviors of G50 Ultra-High Strength Steel Targets Struck by Tungsten Alloy Spherical Fragments at High Velocity
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.618771
- 3,568 views
- 5 citations
Original Research
Published on 11 Jan 2021
Hot Stamping of a B-Pillar Reinforced Panel With 7075 Aluminum Alloy and the Feasibility Study of Short-Time Aging
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.617223
- 4,583 views
- 10 citations
Original Research
Published on 05 Jan 2021
Rutting Performance of Semi-Rigid Base Pavement in RIOHTrack and Laboratory Evaluation
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.590604
- 4,156 views
- 28 citations
Original Research
Published on 22 Dec 2020
A Positioning Method of Temperature Sensors for Monitoring Dam Global Thermal Field
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.587738
- 4,459 views
- 8 citations
Original Research
Published on 18 Dec 2020
The Effect of Asymmetry on Strain Distribution, Microstructure and Texture of Multilayer Aluminum Composites Formed by Roll-Bonding
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.600162
- 3,796 views
- 7 citations
Original Research
Published on 16 Dec 2020
Seismic Performance of Recycled Concrete Filled Circular Steel Tube Columns
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.612059
- 4,535 views
- 11 citations
Original Research
Published on 10 Dec 2020
A Case Study of Industrial Symbiosis to Reduce GHG Emissions: Performance Analysis and LCA of Asphalt Concretes Made With RAP Aggregates and Steel Slags
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.572955
- 12,893 views
- 34 citations
Original Research
Published on 09 Dec 2020
Aging Properties and Mechanism of Microwave-Activated Crumb Rubber Modified Asphalt Binder
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.603938
- 4,580 views
- 33 citations
Original Research
Published on 08 Dec 2020
Hydrogen Diffusion and Its Effect on Hydrogen Embrittlement in DP Steels With Different Martensite Content
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.620000
- 17,095 views
- 34 citations
Original Research
Published on 07 Dec 2020
Strain Hardening Behavior of Laminate Structure With Stable bcc/fcc Bimetal Interfaces
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.602441
- 2,905 views
- 4 citations
Original Research
Published on 30 Nov 2020
Adapting Artificial Intelligence to Improve In Situ Concrete Compressive Strength Estimations in Rebound Hammer Tests
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.568870
- 5,170 views
- 10 citations
Original Research
Published on 30 Nov 2020
Numerical Development of Heat Transfer Coefficient Correlation for Spray Cooling in Continuous Casting
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.577265
- 7,531 views
- 13 citations
Mini Review
Published on 27 Nov 2020
A Review of Multi-phase Slag Refining for Dephosphorization in the Steelmaking Process
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.602522
- 7,013 views
- 16 citations
Original Research
Published on 26 Nov 2020
Challenging Ultra Grain Refinement of Ferrite in Low-C Steel Only by Heat Treatment
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.604792
- 7,157 views
- 17 citations
Original Research
Published on 24 Nov 2020
Multiphase Model for the Prediction of Shrinkage Cavity, Inclusion and Macrosegregation in a 36-Ton Steel Ingot
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.577290
- 3,072 views
- 6 citations
Original Research
Published on 24 Nov 2020
Comparative Study on the Mechanical Strength of SAP Internally Cured Concrete
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.588130
- 4,120 views
- 14 citations
Original Research
Published on 23 Nov 2020
Ductility Evaluation of Damaged Recycled Aggregate Concrete Columns Repaired With Carbon Fiber-Reinforced Polymer and Large Rupture Strain FRP
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.568036
- 6,623 views
- 9 citations
Original Research
Published on 23 Nov 2020
Structural and Thermodynamic Properties of the High-Entropy Alloy AlCoCrFeNi Based on First-Principles Calculations
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.590143
- 7,294 views
- 15 citations
Original Research
Published on 19 Nov 2020
Removal of Congo Red From Aqueous Solutions at Hardened Cement Paste Surfaces
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.567130
- 4,760 views
- 18 citations
Original Research
Published on 18 Nov 2020
Effect of Tuff Powder Mineral Admixture on the Macro-Performance and Micropore Structure of Cement-Based Materials
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.595997
- 3,369 views
- 19 citations
Original Research
Published on 17 Nov 2020
Development of Quick-Solidifying Foamed Concrete for Mine Fires Extinguishment and the Basic Performances Tests
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.587998
- 3,614 views
- 14 citations
Original Research
Published on 16 Nov 2020
Fusion and Visualization of Bridge Deck Nondestructive Evaluation Data via Machine Learning
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2020.576918
- 4,790 views
- 22 citations