Plastics are one of the most widely used materials in the world which society will always be dependent on. This dependency has been clearly highlighted by the requirements for hygiene and protection during the recent global COVID pandemic (Adyel, 2020;Prata et al., 2020). Plastics are broadly integrated into today's lifestyle and are present in almost all consumer and industrial sectors and their production continues to increase (Geyer et al., 2017). Unfortunately, one of the characteristics of plastics that make them so useful -their durability -also ensures that they persist in the environment for very long periods of time. Additionally, and because of their low cost, many plastic objects have long been perceived as disposable. The consequence of this, coupled with the difficulty in developing effective waste management strategies, has been the ubiquitous contamination of the entire planet by plastic debris.Even if proposed global actions to recycle more plastic or prevent the export of plastic waste to countries with poorly developed waste infrastructure through the Basel Convention are implemented, plastic emissions are expected to increase for the foreseeable future unless significant breakthroughs in plastic design or waste management are realized (Lau et al., 2020). Increasing emissions also imply that exposure to plastic pollution and its degradation products, like microplastics, nanoplastics, plastic additives and other chemical leachates, will continue to increase. Such an accumulating plastic cocktail can result in complex and unpredictable impacts, including those on ecological processes (Rillig et al., 2021) or the global carbon cycle (Xia, 2021).Although the problem of plastic pollution was recognised several decades ago, research on plastics lost to the environment and their environmental and health impacts is now an extremely dynamic field involving a great deal of funding, support and effort. As an attempt to find solutions, there have been calls to integrate and introduce more biodegradable or recyclable plastics into the market in order to shift towards more sustainable supply chains. There is also some debate about which solutions make the most sense practically and economically, although it is likely that a combination of approaches may be required. An additional concern centres around the additives used in plastics, many of which are endocrine disrupting substances or otherwise harmful to the environment if released from the material. Chemical regulators, and particularly those in Europe, have become increasing active to make plastics safer and more recyclable, but clearly plastics are complex and diverse materials and understanding their complete life cycle and the (eco)toxicological implications of their extensive use and management is a highly justified, albeit difficult, task.A global, transdisciplinary problem requires a global, transdisciplinary response. Accordingly, the contributions in this Research Topic in Frontiers in Environmental and Marine Science: " Plastics in the Environment: Understanding Impacts and Identifying Solutions"; cover a wide variety of aspects of plastic research and embrace a diversity of environment types, climates and habitats over a broad geographical extent (Europe, Asia, Africa, the Arctic).The importance of efficient but robust and comparable monitoring and detection methods is a key component of the Research Topic, and areas covered in this respect include the potential for remote sensing of litter using drones (Escobar-Sanchéz et al., 2021), the requirement for representative subsampling (Brandt et al., 2021) and a critical review of techniques used to isolate microplastics from geogenic and biogenic material by chemical digestion (Pfeiffer and Fischer, 2020).In many contributions, both contemporary and historical plastics are used to study environmental sources and distributions or to model transport and fate. For example, the general leakage of plastic to the environment and its subsequent distribution is explored using international, empirical data and its relation to drivers such as population density and land use (Schuyler et al., 2021), while records of microplastics in marine sediments, ice cores and peat archives are used to attempt to unravel historical uses of plastics (Bancone et al., 2020). Historical, aerial records of coastlines have also been combined with assessments of soil profiles, vegetation characteristics and type and abundance of litter in a novel study examining the roles that plastics play in shaping coastal landscapes and habitats (Bastesen et al., 2021). On beaches, emphasis is placed on the implications of quantifying plastic particles on a mass versus number basis and considering both surface and buried debris (Ryan et al., 2020), while in surface and subsurface seawater inputs of microplastics are calculated from urban runoff and waste water treatment plants .The weathering of plastics in the environment is considered in contributions that examine the fragmentation of expanded polystyrene into nano-sized particles by thermo-oxidation and hydrodynamic turbulence (Mattsson et al., 2021) and that characterise microbial communities on conventional and biodegradable plastics in alpine and polar soils (Rüthi et al., 2020). The impacts of both the fragmentation and aggregation of microplastics are also studied in the context of the feeding behaviour of freshwater zooplankton (Drago et al., 2020). Further up the food chain, microplastics are profiled in long-lived marine animals (Meaza et al., 2021) and are measured in a variety of animals, including commercially important pelagic fish (Bakir et al., 2020;Haave et al., 2021), with all studies linking observations to potential impacts on human exposure and health.This eclectic collection of articles illustrates the wide diversity of environmental problems that arise from the mismanagement of plastics, and the many difficulties and challenges that scientists, managers, regulators and stakeholders face in reducing or solving these problems. The transdisciplinarity of the subjects should also serve to inform scientists of the many and varied techniques and approaches that are currently available to guide future research towards understanding the diverse impacts of -and identifying the complex solutions to -plastic pollution.
Editorial24 May 2021
Editorial: Plastics in the Environment: Understanding Impacts and Identifying SolutionsORIGINAL RESEARCH
24 September 2020
Joel Rüthi, 3 more and Beat Frey
5 Authors
- JR
Joel Rüthi
Forest Soils and Biogeochemistry, Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), Switzerland
- DB
Damian Bölsterli
Forest Soils and Biogeochemistry, Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), Switzerland
- LP
Lucrezia Pardi-Comensoli
Laboratory for Mechanical Systems Engineering, Swiss Federal Laboratories for Materials Science and Technology (EMPA), Switzerland
- IB
Ivano Brunner
Forest Soils and Biogeochemistry, Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), Switzerland
- BF
Beat Frey
Forest Soils and Biogeochemistry, Swiss Federal Institute for Forest, Snow and Landscape Research (WSL), Switzerland
Plastic pollution poses a threat to terrestrial ecosystems, even impacting soils from remote alpine and arctic areas. Biodegradable plastics are a promising solution to prevent long-term accumulation of plastic litter. However, little is known about the decomposition of biodegradable plastics in soils from alpine and polar ecosystems or the microorganisms involved in the process. Plastics in aquatic environments have previously been shown to form a microbial community on the surface of the plastic distinct from that in the surrounding water, constituting the so-called ‘plastisphere’. Comparable studies in terrestrial environments are scarce. Here, we aimed to characterize the plastisphere microbiome of three types of plastics differing in their biodegradability in soil using DNA metabarcoding. Polylactic acid (PLA), polybutylene adipate terephthalate (PBAT) and polyethylene (PE) were buried in two different soils, from the Swiss Alps and from Northern Greenland, at 15°C for eight weeks. While physico-chemical characteristics of the polymers only showed minor (PLA, PBAT) or no (PE) changes after incubation, a considerably lower α-diversity was observed on the plastic surfaces and prominent shifts occurred in the bacterial and fungal community structures between the plastisphere and the adjacent bulk soil not affected by the plastic. Effects on the plastisphere microbiome decreased with greater biodegradability of the plastics, from PLA to PE. Copiotrophic taxa within the phyla Proteobacteria and Actinobacteria benefitted the most from plastic input. Especially taxa with a known potential to degrade xenobiotics, including Burkholderiales, Caulobacterales, Pseudomonas, Rhodococcus and Streptomyces, thrived in the plastisphere of the Alpine and Arctic soils. In addition, Saccharimonadales (superphylum Patescibacteria) was identified as a key taxon associated with PLA. The association of Saccharibacteria with plastic has not been reported before, and pursuing this finding further may shed light on the lifestyle of this obscure candidate phylum. Plastic addition affected fungal taxa to a lesser extent since only few fungal genera such as Phlebia and Alternaria were increased on the plastisphere. Our findings suggest that the soil microbiome can be strongly influenced by plastic pollution in terrestrial cryoenvironments. Further research is required to fully understand microbial colonization on plastic surfaces and the biodegradation of plastic in soils.



