Editorial: Ultrafast Photonics of Low-Dimensional Materials
Xiaohui Li
Zhuoying Song
Han Zhang
Yufeng Song
Krassimir Panajotov- 1School of Physics and Information Technology, Shaanxi Normal University, Xi’ an, China
- 2SZU-NUS Collaborative Innovation Center for Optoelectronic Science and Technology, Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering, Shenzhen University, Shenzhen, China
- 3Vrije University Brussel, Brussels, Blegium
Editorial on the Research Article
Ultrafast Photonics of Low-Dimensional Materials
Ultrafast photonics is widely used in many fields, including optical fiber communication, femtosecond laser imaging, national defense military, biomedicine and mechanical processing. The wide application of graphene has successfully opened a new era of low-dimensional materials. Low-dimensional materials with atomic layer thickness can not only exist stably, but also have many unique characteristics. With the extensive research of the non-linear optical properties of low-dimensional materials, a series of potential applications of low-dimensional materials as saturable absorbers (SAs) in optical devices have been demonstrated and realized.
This issue of “ultrafast photonics of low-dimensional materials” covers some of the latest progress and achievements in the application of low-dimensional materials in ultrafast photonics. In six original research articles and one review, the theoretical and experimental studies of low dimensional materials related to optics, photonics and optoelectronics are introduced in detail.
Zhang et al. realized passive Q-switched mode-locked operation in Tm, Ho: CaYAlO4 bulk laser for the first time using double walled carbon nanotubes (DWCNT) as SAs. The experimental results show that DWCNT-SAs can be used as a fast starting element for passively Q-switched mode-locked solid state laser of 2 μm band [1]. Xu et al. prepared PbS-doped ring-core fiber by improved chemical vapor deposition method, and proposed an orbital angular momentum (OAM) optical amplifier based on ring core PbS doped fiber. The experiment confirms that the air-hole PbS-doped ring-core fiber can support the OAM |l| = 1 modes (l is eigenvalue) [2]. The optical limiting properties of reduced graphene oxide have been restricted to visible light. Li et al. fixed SnSe nanoflakes on the surface of reduced graphene oxide. It was found that the reduced graphene-oxide and a SnSe/graphene-oxide nanohybrid show a broader reverse saturable absorption and an enhanced non-linear optical response [3]. He et al. demonstrated a passively mode-locked all polarization maintaining Er3+-doped fiber laser based on a non-linear amplifying loop mirror. A stable optical frequency comb with tunable wavelength is realized successfully. By adjusting the pump power, the central wavelength can be changed from 950 to 1,080 nm and from 1,650 to 2080 nm [4]. Chen et al. successfully stripped NbSe2 thin layer by mechanical exfoliation and deposited NbSe2 thin layer on D-type fiber as SAs. A stable dissipative soliton with a pulse duration of 174 ps is produced by coupling saturable absorber into Yb3+-doped fiber laser [5]. Wei et al. summarized the structural, photoelectric and saturable absorption properties of two-dimensional materials. The working principle of wavelength tunable single-frequency fiber laser based on two-dimensional material have been discussed. On this basis, the latest research progress of wavelength tunable single-frequency fiber lasers and the future development prospect of this field is reviewed [6]. Zhang et al. proposed a novel porous-core photonic crystal fiber based on Thermoplastic Olefin Polymer of Amorphous Structure (TOPAS). The core shapes of core and cladding are asymmetric rectangular air holes and six-ring hexagonal lattice circular air holes respectively. The photonic crystal fiber can realize low loss terahertz polarization transmission in a wide frequency range [7].
The seven selected articles in this issue cover only part of the latest developments and applications in the field of low-dimensional materials in ultrafast photonics. From the current development, low-dimensional materials can not only be used as SAs to improve the performance of lasers, but also as nano hybrid materials to further improve the nonlinear response. In the future, we sincerely hope that the low-dimensional materials used in ultrafast photonics will make great progress.
Author Contributions
LX put forward the writing outline of the editorial, collected and sorted out the cited literature, and made important amendments to the paper. SZ is responsible for drafting the paper. ZH, SY, and PK revised the paper and approved the final version.
Conflict of Interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
References
1. Zhang Y., Ling W., Qiao D., Sui R., Chen C. (2020) Passively Q-switched mode-locked Tm, Ho: CaYAlO4 laser based on double-walled carbon nanotube saturable absorber. Front Phys 8, 86. doi:10.3389/fphy.2020.00086
2. Xu L., Shang Y., Yang J., Chen Z., Pang F., Liu H., et al. (2020). Orbital angular momentum optical amplifier based on PbS-doped ring-core fiber. Front Phys 8, 198. doi:10.3389/fphy.2020.00198
3. Li X., Wang Y., Wang Y., Wang H., Qi X., He J., et al. (2020) Donor-acceptor type reduced graphene-oxide and a tin-selenide nanohybrid with broad and ultrafast optical limiting properties. Front Phys 8, 298. doi:10.3389/fphy.2020.00298
4. He X., Zhang P., Zhang Y., Lin Q., Guo H., Hou L., et al. (2020) Wavelength-tunable ultra-stable optical frequency comb based on all-polarization-maintaining fiber laser. Front Phys 8, 226. doi:10.3389/fphy.2020.00226
5. Chen L., Du L., Li J., Yang L., Yi Q., Zhao C. (2020) Dissipative soliton generation from Yb-doped fiber laser modulated by mechanically exfoliated NbSe2. Front Phys 8, 320. doi:10.3389/fphy.2020.00320
6. Wei Z., Chen S., Ding J. (2020) Recent advance in tunable single-frequency fiber laser based on two-dimensional materials. Front Phys 8, 602.
Keywords: ultrafast fiber laser, low-dimensional materials, materials photonics, soliton, photonic-crystal fiber
Citation: Li X, Song Z, Zhang H, Song Y and Panajotov K (2021) Editorial: Ultrafast Photonics of Low-Dimensional Materials. Front. Phys. 8:632406. doi: 10.3389/fphy.2020.632406
Received: 23 November 2020; Accepted: 02 December 2020;
Published: 14 January 2021.
Edited and Reviewed by:
Lorenzo Pavesi, University of Trento, ItalyCopyright © 2021 Li, Song, Zhang, Song and Panajotov. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Xiaohui Li, lixiaohui0523@163.com