CORRECTION article
Front. Mater.
Sec. Mechanics of Materials
Volume 12 - 2025 | doi: 10.3389/fmats.2025.1671716
Correction: EFFECT OF DIFFERENT FLY ASH RATIOS ON THE MECHANICAL PROPERTIES OF HYBRID STEEL FIBER REINFORCED CONCRETE
Provisionally accepted
- Batman University, Batman, Türkiye
Select one of your emails
You have multiple emails registered with Frontiers:
Notify me on publication
Please enter your email address:
If you already have an account, please login
You don't have a Frontiers account ? You can register here
Correction on: Kaya, N. (2025). Effect of different fly ash ratios on the mechanical properties of hybrid steel fiber reinforced concrete. Frontiers in Materials, 12, 1585291. In the published article, there was an error in Table 3. Mixture Proportions for 1 m³ of Concrete Series (kg) as published. During the initial stage of the study, a draft mix design table was prepared. In this draft, the fly ash quantities were miscalculated. This error was identified and corrected before the specimens were produced. However, the incorrect draft table was mistakenly included in the published version of the article. The correct table (reflecting the actual mix used in the experiments) has been provided with this correction. Since the specimens were produced using the correct mix, the study's findings remain accurate and unaffected. The corrected Table 3. Mixture Proportions for 1 m³ of Concrete Series (kg) and its caption appear below. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way.The original article has been updated.
Keywords: Fly ash, concrete, steel fiber, Hybrid fiber, Mechanical Properties
Received: 23 Jul 2025; Accepted: 02 Sep 2025.
Copyright: © 2025 Kaya. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence: Necim Kaya, Batman University, Batman, Türkiye
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.